Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin

The reaction of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) with Cd(II), Pb(II), Hg(II) and Zn(II) was studied spectrophotometrically and kinetics, equilibrium constants as well as photodecomposition of complexes were determined. It was verified that these metal ions with large radius accelerate the incorporation reaction of zinc into TCPP. On the basis of the mechanism and kinetics of this reaction, a sensitive method for the spectrophotometric determination of trace amounts of Zn(II) has been developed. The molar absorptivity of examined Zn-TCPP complex and Sandell's sensitivity at 423 nm were 3.5×10⁵ M⁻¹ cm⁻¹ and 18.3 ng cm⁻². The detection limit for the recommended procedure was 1.4×10⁻⁹ M (0.9 ng ml⁻¹) and precision in range 20-100 ng ml⁻¹ not exceeds 2.7% RSD. The proposed method applied for zinc determination in natural waters and nutritional supplement was compared with AAS results and declared value.     

Complexes of Co(II), Ni(II) and Cu(II) with lapachol

Complexes of naturally occurring hydroxynaphtho-quinone, lapachol (2-hydroxy-3(3-methyl-2-buthenyl)-1,4-naphthoquinone = HL) with Co(II), Ni(II) and Cu(II) have been prepared by reaction of the corresponding acetates with the ligand (HL) in ethanol. The molecular and crystal structures were determined for [CoL₂(EtOH)₂] (1), [NiL₂(EtOH)₂] (2), and [CuL₂(py)₂] (3). In all cases the deprotonated lapachol behaves as chelating bidentate ligand. The complexes were also characterized by elemental analyses, cyclic voltammetry, and FAB-MS.     

Chelating resin containing s-bonded dithizonefor the separation of copper(II), nickel(II) and zinc(II)

Analytical and physicochemical properties of a crosslinked poly (vinyl pyridine) based resin containing dithizone were examined. The resin was further used for the preconcentration of copper, nickel and zinc at batch and column level. Various conditions such as pH, equilibration time, temperature were optimised for the maximum loading of copper, nickel and zinc. The loading capacities of the resin for copper, nickel and zinc were observed to be 0.51, 0.59 and 0.65 mmol g⁻¹ of dry resin respectively. Elution of loaded copper, nickel and zinc from the resin was done by using 0.1 M HCl, 0.1 M H₂SO₄ and 0.1 M HNO₃ respectively. Separation of copper, nickel and zinc in binary and ternary mixtures was achieved without any cross contamination.     

Cu(II), Zn(II), AND Pb(II) STABILITY CONSTANTS OF CYCLAM AMPHIPHILES

Abstract

1-Hexadecyl-1,4,8,11-tetraazacyclotetradecane (hexadecyl cyclam) and 1-(3,7,11,15-tetramethyl) hexadecyl-1,4,8,11-tetraazacyclotetradecane (tetramethylhexadecyl cyclam) have been synthesized and their deprotonation and ligand-metal formation constants, K, determined for Cu(II), Zn(II) and Pb(II). The coupling of a long hydrocarbon chain to a ring nitrogen decreased the general ability of the cyclam ring to complex with metal ions. The greatest effect appeared to be for Cu(II) decreasing from a pK of 27 for cyclam to about 17. The titrations were fitted by HYPERQUAD and the concentrations of the intermediate complexes obtained as a function of pH. Metal-ligand complexes LMH₂ ⁴⁺, LMH₂₊ and LM₂₊ can coexist through a wide pH range. We have also calculated a composite metal-binding constant, K′, to reflect more accurately the overall ability of these ligands to bind a metal at any particular pH. K′, which is 14.6 for (hexadecyl cyclam)-Cu(II), is constructed from the concentrations of all the metal-chelated species at pH = 7. Generally, K′ is much lower than K.     

Synthesis and Characterization of Ni(II), Cu(II), Zn(II) and Cd(II) Complexes of a New Vic-Dioxime Ligand

In this study, 1,2-dihydroxyimino-3,7-di-aza-9,10-O-α-methyl benzal decane (LH₂) was synthesized starting from 1,2-O-α-methyl benzal-4-aza-7-amino heptane (RNH₂) and antichloroglyoxime. With this ligand, complexes were synthesized using Ni(II) and Cu(II) salts with a metal:ligand ratio of 1:2. However, the reaction of the ligand with salts of Zn(II) and Cd(II) gave products with metal:ligand ratio of 1:1. Structures of the ligand and its complexes are proposed based on elemental analyses, IR, ¹³C- and ¹H-NMR spectra, magnetic susceptibility measurements and thermogravimetric analyses (TGA).     

Spectroscopic evaluation of Co(II), Ni(II) and Cu(II) complexes derived from thiosemicarbazone and semicarbazone

Co(II), Ni(II) and Cu(II) complexes were synthesized with thiosemicarbazone (L(1)) and semicarbazone (L(2)) derived from 2-acetyl furan. These complexes were characterized by elemental analysis, molar conductance, magnetic moment, mass, IR, electronic and EPR spectral studies. The molar conductance measurement of the complexes in DMSO corresponds to non-electrolytic nature. All the complexes are of high-spin type. On the basis of different spectral studies six coordinated geometry may be assigned for all the complexes except Co(L)(2)(SO(4)) and Cu(L)(2)(SO(4)) [where L=L(1) and L(2)] which are of five coordinated square pyramidal geometry.     

SYNTHESIS OF 1,2-DIHYDROXYIMINO-l-PHENYL-3,7-DIAZA-9,10-O-BENZALOCTANE AND ITS COMPLEXES WITH Co(II), Cu(II) AND Ni(II)

Abstract

A novel dioxime, 1,2 dihydroxyimino-3,7-diaza-9,10-O-benzaloctane (LH₂) was prepared by reaction of l,2-0-benzylidene-4-aza-7-aminoheptane and anti-phenylchloroglyoxime in absolute ethanol. Mononuclear complexes with a metal-ligand ratio of 1:2 were prepared with Co(II), Cu(II) and Ni(II). To elucidate the structures of the ligand and complexes, elemental analyses, IR, ¹H NMR and ¹³C NMR spectral data and magnetic susceptibility measurements have been examined.     

Synthesis and characterization of Cu(II), Co(II) and Ni(II) coordination polymers containing bis(imidazolyl) ligands

Two structurally related flexible imidazolyl ligands, bis(N-imidazolyl)methane (L₁) and 1,4-bis(N-imidazolyl)butane (L₂), were reacted with Cu(II), Co(II) and Ni(II) salts of aliphatic/aromatic dicarboxylic acids resulting in the formation of a number of novel metal–organic coordination architectures, [CuB₂(ox)₂(L₁)₂(H₂O)₂] · 4H₂O (1) (ox = oxalate), [Cu(pdc)(L₂)_1.5] · 4H₂O (2, pdc = pyridine-2,6-dicarboxylate), [Co(L)₂(H₂O)₂](tp) · 4H₂O (3, tp = terephthalate), [Ni(L₁)₂(H₂O)₂](ip) · 5H₂O (4, ip = isophthalate), [Cu₂(L₁)₄(H₂O)₄](tp)₂ · 7H₂O (5), [Co(mal)(L₁)(H₂O)] · 0.5MeOH (6, mal = malonate), [Co(pdc)(L₁)(H₂O)] (7). All the complexes have been structurally characterized by X-ray diffraction analysis. The different coordination modes of the dicarboxylate anions, due to their chain length, rigidity and diimidazolyl functionality, lead to a wide range of different coordination structures. The coordination polymers exhibit 1D single chain, ladder, 2D sheet and 2D network structures. The aliphatic and aromatic dicarboxylates can adopt chelating μ₂ and chelating-bridging μ₃ coordination modes, or act as uncoordinated counter anions. The central metal ions are coordinated in N₂O₄, N₄O₂, N₂O₃ and N₃O₃ fashions, depending on the ancillary ligands. The topology of 1 gives rise to macrocycles which are connected through hydrogen bonds to form 1D chains, whereas compound 2 exhibits a 1D polymeric ladder in which the carboxylate acts as a pincer ligand. Compounds 3–5 show doubly bridged 1D chains, and the dicarboxylate groups are not coordinated but form 2D corrugated sheets with water molecules intercalated between the cationic layers. Compound 6 has a 2D network sheet structure in which each metal ion links three neighboring Co atoms by the bis(N-imidazolyl)methane ligand. The cobalt compound 7, with a 2D polymeric double sheet structure, is built from pincer carboxylate (pdc) and 1,4-bis(N-imidazolyl)methane ligands.     

Spectrophotometric study of coproporphyrin-I complexes of copper(II) and cobalt(II)

The reagent 3,8,13,18-tetramethyl-21H,23H-porphine-2,7,12,17-tetrapropionic acid or coproporphyrin-I (CPI) was used for the spectrophotometric determination of copper(II) and cobalt(II) in the presence of pyridine and imidazole catalysts. Optimum conditions were investigated and the methods were applied to the determination of parts per billion levels of copper(II) and cobalt(II). The Sandell sensitivities of the recommended procedures were 0.568 μm cm⁻² and 0.464 μg cm⁻² (for A = 0.001) for copper and cobalt, respectively. The relative standard deviations were 2.0% for copper and 1.0% for cobalt. The kinetics of the reaction of CPI with copper(II) and cobalt(II) in the presence of the catalysts and the influence of the temperature were studied, and their kinetic constants determined.The influence of light on the photodecomposition of CPI was also studied.     

Synthesis and magnetic properties of binuclear cobalt(Ⅱ), nickel(Ⅱ) and copper(Ⅱ) complexes bridged by oxamidate group

Four binuclear Co(Ⅱ), Ni(Ⅱ) and Cu(Ⅱ) complexes bridged by oxamidate (oxd) group have been synthesized, namely Co2(byp)2(oxd)(ClO4)2 (1), Co2(Me2bpy)2(oxd)(ClO4)2.H2O (2), Ni2(bpy)2(oxd)(ClO4)2.2H2O (3) and Cu2(Me2bpy)2(oxd)(NO3)2 (4). (bpy=2,2'-bipyridyl, Me2-bpy=4,4'-dimethylbipyridyl, oxd=oxamidate) The complexes are characterized by IR, UV spectra, EPR and variable-temperature magnetic susceptibility (4-300 K). The susceptibility data for. complexes 1 and 3 were least-squares fit to the susceptibility equation derived from the spin Hamiltonian H=-2J . S1 . S2. The exchange integral, J, was found to be equal to -3.62 cm-1 in 1 and -1.82 cm-1 in 3. This indicates a weak antiferromagnetic spin exchange interaction between the metal ions.     

Thermal behavior of Cu(II)-, Cd(II)-, and Hg(II)-exchanged montmorillonite complexedwith cysteine

The thermal behavior of montmorillonite and organically modified montmorillonite, both treated with heavy metal cations [Cu(II), Cd(II) and Hg(II)], was characterized via thermal analyses (TG, DTG and DTA) combined with evolved species gas mass spectrometry (MS-EGA), and X-ray diffraction at in situ controlled temperature (HTXRD). The reactions involving Cu(II)- and Cd(II)-montmorillonite samples are mostly related to H₂O and OH loss, unlike Hg(II)-montmorillonite, where effects associated to Hg(II) loss are also present. Finally reactions related to dehydration, dehydroxylation and to organic matter decomposition can be observed in montmorillonite samples treated with cysteine.     

Studies on mononuclear chelates derived from substituted Schiff-base ligands (part 6): synthesis and characterization of a new 3-ethoxysalicyliden- p -aminoacetophenoneoxime and its complexes with cobalt(II), nickel(II), copper(II) and zinc(II)

Schiff-base complexes of cobalt(II), nickel(II), copper(II) and, zinc(II) with 3-ethoxysalicyliden-p-aminoacetophenoneoxime (HL) were prepared and characterized on the basis of elemental analyses, IR, ¹H- and ¹³C-NMR, electronic spectra, magnetic susceptibility measurements, molar conductivity and thermogravimetric analyses (TGA). A tetrahedral geometry has been assigned to the complexes.     

Potentiometric study of Cd(II) and Pb(II) complexation with two high molecular weight poly(acrylic acids); comparison with Cu(II) and Ni(II)

The cadmium (II) or lead (II) complex formation with two poly(acrylic acids) of high molecular weight (Mw=2.5×10⁵ and 3×10⁶) was investigated in dilute aqueous solution (NaNO₃ 0.1 mol l⁻¹; 25°C). Potentiometric titrations were carried out to determine the stability constants of the MA and MA₂ complex species formed. Bjerrum’s method, modified by Gregor et al. (J. Phys. Chem. 59 (1955) 34–39), for the study of polymeric acids was used. The results were compared to those previously obtained in the same conditions with copper (II) and nickel (II) . It appeared that the two polymers under study present similar binding properties and that the stability constants of the complex species formed increased in the following order, depending on the metal ion: Ni(II)β₁₀₂ was found to be close to 7.0) and allowed the formation of the predominant PbA₂ species in a quite large pH domain. Finally, the greater stability of PAA complexes compared to those of their monomeric analogs, glutaric and acetic acids, was confirmed.     

Synthesis and Characterization of A Vic-Dioxime Derivative and Investigation of its Complexes with Ni(II), Co(II), Cu(II) and UO2(VI) Metals

In this study, 1,2-dihdroxyimino-3,7-di-aza-9,10-O-iso-propylidene decane (LH₂ ) was synthesized starting from 1,2-O-iso-propylidene-4-aza-7-aminoheptane (RNH₂ ) and anti-chloroglyoxime. Complexes of this ligand with Ni(II), Co(II), Cu(II) and UO₂(VI) salts were prepared. Structures of the ligand and its complexes are proposed based on elemental analyses, IR, ¹³C and ¹H NMR spectra magnetic susceptibility measurements and thermogravimetric analyses (TGA).     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Photofunctional supramolecular solution systems of chiral Schiff base nickel(II), copper(II), and zinc(II) complexes and photochromic azobenzenes

Preparations, crystal structures, electronic and CD spectra are reported for new chiral Schiff base complexes, bis(N-R-1-naphthylethyl-3,5-dichlorosalicydenaminato)nickel(II), copper(II), and zinc(II). Nickel(II) and copper(II) complexes adopt a square planar trans-[MN₂O₂] coordination geometry with Δ(R,R) configuration. While zinc(II) complex adopts a compressed tetrahedral trans-[MN₂O₂] one with Δ(R,R) configuration and exhibits an emission band around 21 000 cm⁻¹ (λ_ex = 27 000 cm⁻¹). Absorption and CD spectra were recorded in N,N′-dimethylformamide, acetone, methanol, chloroform, and toluene solutions to discuss relationships between spectral shifts of d–d and π–π^∗ bands by structural changes of the complexes and physical properties of the solvents. Moreover, we have attempted to investigate conformational changes of the complexes induced by photoisomerization of azobenzene, 4-hydroxyazobenzene, or 4-aminoazobenzene, in various solutions under different conditions. Weak intermolecular interactions between complexes and azobenzenes are important for the phenomenon by conformational changes of bulky π-conjugated moieties of the ligands.     

Synthesis and characterization of Ni(II), Pd(II) and Pt(II) complexes of 2,4-diamino-5-(3, 4, 5-trimethoxybenzyl)pyrimidine complexes

The Ni(II), Pd(II) and Pt(II) complexes of 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine (trimethoprim) have been synthesized and characterized by elemental analysis, electronic and IR spectroscopy, and magnetic susceptibility measurements. The single-crystal X-ray structure of the Ni(II) complex is reported. Ni(II) is coordinated to the N(1) atoms of two trimethoprim molecules that act as monodentates. Octahedral coordination around the nickel atom is completed by coordination to two molecules of methanol and two acetate ions. Pd(II) and Pt(II) complexes are square planar and the metal ions coordinate one molecule of trimethoprim, two chloride ions and a molecule of water.     

Mononuclear and homobinuclear cobalt(II), nickel(II) and copper(II) complexes with mono and bis-azocompounds derived from 2,7-dihydroxynaphthalene and anthranilic acid or o-aminophenol

Two new series of mononuclear and homobinuclear Co(II), Ni(II) and Cu(II) complexes with mono- and bis-azo compounds derived from 2,7-dihydroxynaphthalene and anthranilic acid or o-aminophenol are prepared and characterized by elemental and thermal analyses, conductance, IR, electronic, ESR spectra and magnetic moment measurements. The ligand field splitting parameters and Racah constant are calculated. The spectral and magnetic results obtained are utilized to determine the geometries around the metal(II) ion. The geometry of the complex formed depends on the structure of the ligand and the type of metal(II) ion. The mode of bonding of the ligand with the metal ions is deduced from IR spectra.     

Nickel(II), copper(II) and zinc(II) complexes withN-phenylglycine in water-methanol solution

The complex equilibria of the Ni(II), Cu(II), and Zn(II) complexes withN-phenylglycine have been studied by computer analysis of potentiometric data. The mode of coordination has been established by¹H NMR and IR studies.

---

Nickel(II), Kupfer(II) und Zink(II)-Komplexe mitN-Phenylglycin in Wasser-Methanol-Lösung

Zusammenfassung Anhand der Computer-Analyse von potentiometrischen Daten wurden die Bildungsgleichgewichte von Nickel(II), Kupfer(II) und Zinc(II)-Komplexen mitN-Phenylglycin untersucht. Zur Bestätigung des Koordinationstyps wurden¹H-NMR- und IR-Messungen vorgenommen.

     

Separation of Ga(III) from Cu(II), Ni(II) and Zn(II) in aqueous solution using synthetic polymeric resins

Poly (acrylamide-acrylic acid-dimethylaminoethylmethacrylate), p(AM-AA-DMAEM) and Poly(acrylamide-acrylic acid)-ethylenediaminetetracetic acid disodium, p(AM-AA)-EDTANa₂ were prepared by gamma radiation-induced template polymerization technique and used for the separation of Ga (III) from Cu (II), Ni (II), and Zn (II) in aqueous media. The effect of pH and contact time on the separation process was studied. The optimum pH value for the separation process is 3–3.5. The result shows that Ga (III) is first extracted while Cu (II), Ni (II) and Zn(II) are slightly extracted at this pH value. The recovery of metals using HCl, HNO₃ and H₂SO₄ has been studied. The resins may be regenerated using 2M HCl solutions.