Measuring steady-state cerebral vasomotor reactivity using non-triggered phase-contrast magnetic resonance imaging

To investigate cVMR by using CO2-based hypercapnic challenge and blood flow monitoring employing non-triggered phase contrast (PC) magnetic resonance imaging. Six healthy volunteers (6 male; mean age: 29 years) participated this study after providing institutionally approved consent. This study used non-triggered PC imaging to increase temporal resolution of dynamic blood flow measurements, allowing real-time monitoring of the hypercapnic challenge response. Results suggest that vasomotor reactivity measured by non-triggered PC imaging is positively associated with the concentration of inhaled CO2. This study concludes that CO2 challenge combined with non-triggered PC flow imaging is potentially useful to provide diagnostic information for patients with cerebrovascular disease.     

Rapid three-dimensional functional magnetic resonance imaging of the initial negative BOLD response

Functional MRI is most commonly used to study the local changes in blood flow that accompanies neuronal activity. In this work we introduce a new approach towards acquiring and analyzing fMRI data that instead provides the potential to study the initial oxygen consumption in the brain that accompanies activation. As the oxygen consumption is closer in timing to the underlying neuronal activity than the subsequent blood flow, this approach promises to provide more precise information about the location and timing of activity. Our approach is based on using a new single shot 3D echo-volumar imaging sequence which samples a small central region of 3D k-space every 100ms, thereby giving a low spatial resolution snapshot of the brain with extremely high temporal resolution. Explicit and simple rules for implementing the trajectory are provided, together with a straightforward reconstruction algorithm. Using our approach allows us to effectively study the behavior of the brain in the time immediately following activation through the initial negative BOLD response, and we discuss new techniques for detecting the presence of the negative response across the brain. The feasibility and efficiency of the approach is confirmed using data from a visual-motor task and an auditory-motor-visual task. The results of these experiments provide a proof of concept of our methodology, and indicate that rapid imaging of the initial negative BOLD response can serve an important role in studying cognition tasks involving rapid mental processing in more than one region.     

Assessment of cerebrovascular reactivity with functional magnetic resonance imaging: comparison of CO(2) and breath holding

Cerebral blood flow (CBF) and oxygenation changes following both a simple breath holding test (BHT) and a CO(2) challenge can be detected with functional magnetic resonance imaging techniques. The BHT has the advantage of not requiring a source of CO(2) and acetazolamide and therefore it can easily be performed during a routine MR examination. In this study we compared global hemodynamic changes induced by breath holding and CO(2) inhalation with blood oxygenation level dependent (BOLD) and CBF sensitized fMRI techniques. During each vascular challenge BOLD and CBF signals were determined simultaneously with a combined BOLD and flow-sensitive alternating inversion recovery (FAIR) pulse sequence. There was a good correlation between the global BOLD signal intensity changes during breath holding and CO(2) inhalation supporting the notion that the BHT is equivalent to CO(2) inhalation in evaluating the hemodynamic reserve capacity with BOLD fMRI. In contrast, there was no correlation between relative CBF changes during both vascular challenges, which was probably due to the reduced temporal resolution of the combined BOLD and FAIR pulse sequence.     

Mapping of left ventricle wall thickness in mice using 11.7-T magnetic resonance imaging

BackgroundThe left ventricle (LV) wall thickness is an important and routinely measured cardiologic parameter. Here we introduce three-dimensional (3D) mapping of LV wall thickness and function using a self-gated magnetic resonance (MR) sequence for ultra-high-field 11.7-T MR cine imaging of mouse hearts.Methods and resultsSix male C57BL/6-j mice were subjected to 11.7-T MR imaging (MRI). Three standard views—short axis, long axis four-chamber, and long axis two-chamber—and eight consecutive short axis scans from the apex to base were performed for each mouse. The resulting 11 self-gated cine images were used for fast low-angle shot analysis with a navigator echo over an observation period of approximately 35 min. The right ventricle (RV) and LV were identified in the short axis and four-chamber views. On 3D color-coded maps, the interventricular septum wall (diastole: 0.94 ± 0.05 mm, systole: 1.20 ± 0.09 mm) and LV free wall (diastole: 1.07 ± 0.15 mm, systole: 1.79 ± 0.11 mm) thicknesses were measured.ConclusionThis 3D wall thickness mapping technique can be used to observe regional wall thickness at the end-diastole and end-systole. Self-gated cine imaging based on ultra-high-field MRI can be used to accurately and easily measure cardiac function and wall thickness in normal mouse hearts. As in the preclinical study, this versatile and simple method will be clinically useful for the high-field-MRI evaluation of cardiac function and wall thickness.     

Ictal imaging using functional magnetic resonance

Magnetic resonance imaging (MRI) can now provide maps of human brain function with high spatial and temporal resolution. This noninvasive technique can also map the coritical activation that occurs during focal seizures, as demonstrated here by the results obtained using a conventional 1.5 T clinical MRI system for the investigation of a 4-year-old boy suffering from frequent partial motor seizures of his right side. FLASH images (TE = 60 ms) were acquired every 10 s over a period of 25 min, and activation images derived by subtracting baseline images from images obtained during clinical seizures. Functional MRI revealed sequential activation associated with specific gyri within the left hemisphere with each of five consecutive clinical seizures, and also during a period that was not associated with a detectable clinical seizure. The activated regions included gyri that were structurally abnormal. These results demonstrate (a) that functional MRI can potentially provide new insights into the dynamic events that occur in the epileptic brain and their relationship to brain structure; and (b) that there is the possibility of obtaining similar information in the absence of clinical seizures, suggesting the potential for studies in patients with interictal electrical disturbances.     

170 nm nuclear magnetic resonance imaging using magnetic resonance force microscopy

We demonstrate one-dimensional nuclear magnetic resonance imaging of the semiconductor GaAs with 170 nm slice separation and resolve two regions of reduced nuclear spin polarization density separated by only 500 nm. This was achieved by force detection of the magnetic resonance, magnetic resonance force microscopy (MRFM), in combination with optical pumping to increase the nuclear spin polarization. Optical pumping of the GaAs created spin polarization up to 12 times larger than the thermal nuclear spin polarization at 5K and 4T. The experiment was sensitive to sample volumes of 50 microm(3) containing approximately 4 x 10(11)71 Ga/Hz. These results demonstrate the ability of force-detected magnetic resonance to apply magnetic resonance imaging to semiconductor devices and other nanostructures.     

Study of cerebrovascular reserve capacity by magnetic resonance perfusion weighted imaging and photoacoustic imaging

The aim of this work was to assess the feasibility of photoacoustic imaging (PAI) and MR imaging for evaluating the cerebrovascular reserve capacity (CVRC) in animal models. Wistar-Kyoto (WKY) rats and spontaneous hypertensive rats (SHR) were used for MRI. BALB/c mice were used for PAI. MR perfusion weighted imaging (PWI) was performed on a 1.5-T whole-body MR system before and after oral administration of acetazolamide (ACZ). The region of interest (ROI) was chosen in the bilateral frontal lobe for measuring regional cerebral blood flow (rCBF), regional cerebral blood volume (rCBV) and mean transit time (MTT). The vessel diameters of the superficial layer of the cortex were measured by PAI in the resting and ACZ-activated mice. The results showed that there was a statistical difference between the resting and ACZ-activated animals in vessel diameter, rCBV and rCBF values. The increments in rCBV and rCBF of WKY rats between resting and ACZ test states were significantly higher than that of SHR. The pathological findings of small arterial walls and lumen of the brain were also different between WKY and SHR rats. The diameters of blood vessels in the superficial layer of the brain measured by PAI were enlarged after the ACZ tolerance test. This result was also observed in the MRI CBV map, where the signal of the vessel in the superficial layer of the cortex became redder after the ACZ stimulation, suggesting the increase of blood flow. It can be concluded that MR PWI and PAI combined with the ACZ test might be useful in evaluating the CVRC and revealing the pathologic changes in cerebral vessels.     

Low-field magnetic resonance imaging using multiplicative regularization

In this paper we present a magnetic resonance imaging (MRI) technique that is based on multiplicative regularization. Instead of adding a regularizing objective function to a data fidelity term, we multiply by such a regularizing function. By following this approach, no regularization parameter needs to be determined for each new data set that is acquired. Reconstructions are obtained by iteratively updating the images using short-term conjugate gradient-type update formulas and Polak-Ribière update directions. We show that the algorithm can be used as an image reconstruction algorithm and as a denoising algorithm. We illustrate the performance of the algorithm on two-dimensional simulated low-field MR data that is corrupted by noise and on three-dimensional measured data obtained from a low-field MR scanner. Our reconstruction results show that the algorithm effectively suppresses noise and produces accurate reconstructions even for low-field MR signals with a low signal-to-noise ratio.     

High-field magnetic resonance imaging using solenoid radiofrequency coils

High-resolution magnetic resonance imaging using dedicated high-field radiofrequency micro-coils at 16.4 T (700 MHz) was investigated. Specific solenoid coils primarily using silver and copper as conductors with enamel and polyurethane coatings were built to establish which coil configuration produces the best image. Image quality was quantified using signal-to-noise ratio and signal variation over regions of interest. Benchmarking was conducted using 5-mm diameter coils, as this size is comparable to an established coil of the same size. Our 1.4-mm-diameter coils were compared directly to each other, from which we deduce performance as a function of conductor material and coating. A variety of materials and conductor coatings allowed us to choose an optimal design, which we used to image a kidney section at 10-micron resolution. We applied zero-fill extrapolation to achieve 5-micron resolution.     

Parallel magnetic resonance imaging using coils with localized sensitivities

The purpose of this study was to present clinical examples and illustrate the inefficiencies of a conventional reconstruction using a commercially available phased array coil with localized sensitivities. Five patients were imaged at 1.5 T using a cardiac-synchronized gadolinium-enhanced acquisition and a commercially available four-element phased array coil. Four unique sets of images were reconstructed from the acquired k-space data: (a) sum-of-squares image using four elements of the coil; localized sum-of-squares images from the (b) anterior coils and (c) posterior coils and a (c) local reconstruction. Images were analyzed for artifacts and usable field-of-view. Conventional image reconstruction produced images with fold-over artifacts in all cases spanning a portion of the image (mean 90 mm; range 36-126 mm). The local reconstruction removed fold-over artifacts and resulted in an effective increase in the field-of-view (mean 50%; range 20-70%). Commercially available phased array coils do not always have overlapping sensitivities. Fold-over artifacts can be removed using an alternate reconstruction method. When assessing the advantages of parallel imaging techniques, gains achieved using techniques such as SENSE and SMASH should be gauged against the acquisition time of the localized method rather than the conventional sum-of-squares method.     

Autonomous magnetic resonance imaging

Access to Magnetic Resonance Imaging (MRI) across developing countries ranges from being prohibitive to scarcely available. For example, eleven countries in Africa have no scanners. One critical limitation is the absence of skilled manpower required for MRI usage. Some of these challenges can be mitigated using autonomous MRI (AMRI) operation. In this work, we demonstrate AMRI to simplify MRI workflow by separating the required intelligence and user interaction from the acquisition hardware. AMRI consists of three components: user node, cloud and scanner. The user node voice interacts with the user and presents the image reconstructions at the end of the AMRI exam. The cloud generates pulse sequences and performs image reconstructions while the scanner acquires the raw data. An AMRI exam is a custom brain screen protocol comprising of one T₁-, T₂- and T₂*-weighted exams. A neural network is trained to incorporate Intelligent Slice Planning (ISP) at the start of the AMRI exam. A Look Up Table was designed to perform intelligent protocolling by optimizing for contrast value while satisfying signal to noise ratio and acquisition time constraints. Data were acquired from four healthy volunteers for three experiments with different acquisition time constraints to demonstrate standard and self-administered AMRI. The source code is available online. AMRI achieved an average SNR of 22.86 ± 0.89 dB across all experiments with similar contrast. Experiment #3 (33.66% shorter table time than experiment #1) yielded a SNR of 21.84 ± 6.36 dB compared to 23.48 ± 7.95 dB for experiment #1. AMRI can potentially enable multiple scenarios to facilitate rapid prototyping and research and streamline radiological workflow. We believe we have demonstrated the first Autonomous MRI of the brain.     

Quantification of patellofemoral joint contact area using magnetic resonance imaging

To describe a method for quantifying patellofemoral joint contact area using magnetic resonance imaging (MRI), we used a repeated measures design using cadaver specimens. The use of contact area obtained from cadaveric specimens for biomechanical modeling does not permit investigators to assess the inter-subject variability in contact area as a result of patellofemoral pathology or malalignment. Therefore, a method for measuring patellofemoral joint contact area in-vivo is necessary. Six fresh frozen unmatched human cadaver knees were thawed at room temperature and minimally dissected to permit insertion of a pressure sensitive film packet into the suprapatellar pouch. A custom loading apparatus was designed to apply a compressive load to the patellofemoral joint at 30 degrees of flexion. Simultaneous measurement of contact area was made using both the pressure sensitive film technique and MRI. The intraclass correlation coefficient (ICC) and coefficient of variation were used to compare the agreement between the two methods and to assess the repeatability of the MRI method. Good agreement was found between the MRI and pressure sensitive film techniques (ICC 0.91; CV 13%). The MRI technique also was found to be highly reproducible (ICC 0.98; CV 2.3%). MRI assessment of patellofemoral joint contact area was found to be comparable to the established pressure sensitive film technique. These results suggest that this method may be a valuable tool in quantifying patellofemoral joint contact area in-vivo. Quantification of the patellofemoral joint stress has been dependent on patellofemoral joint contact area obtained from cadaver specimens, thereby negating the potential influence of subject specific variability. Developing a non-invasive technique to evaluate contact area will assist researchers and/or clinicians in obtaining patient-specific contact area data to be used in biomechanical analyses and clinical decision making.