Electroactive hydrogels based on poly(acrylic acid) and polypyrrole

This study is concerned with the preparation of novel composite systems in which the hydrogel of crosslinked poly(acrylic acid) is a matrix and polypyrrole is an electroconducting component. The effects of synthesis conditions on the structure of the composite systems, their ability to swell in water, and mechanical characteristics are studied. The proposed synthesis procedure allows production of a bulk electroconducting phase of polypyrrole in the hydrogel matrix. The effect of crosslink density of hydrogel on the character of polypyrrole distribution in the matrix is studied. The above composites combine the electrical characteristics of polypyrrole with high elasticity and the ability to repeatedly swell the crosslinked poly(acrylic acid).     

Homogeneous hydrogels made with acrylic acid,acrylamide and chemically functionalized carbon nanotubes

Carbon nanotubes (CNTs) chemically functionalized were used to synthesize a series of novel nanocomposite hydrogels by in situ polymerization with acrylic acid (AA) and acrylamide (AM). A novel strategy was developed to prepare these hydrogels. CNTs were functionalized following a three-step chemical procedure: (i) purified carbon nanotubes (CNTs_p) were partially surface oxidized to obtain CNTs with hydroxyl, carbonyl and carboxyl groups on their sidewalls (CNTs_oxi), (ii) CNTs_oxi were reacted with oxalyl chloride to obtain CNTs functionalized with acyl chloride groups (CNTs_OCl), and (iii) CNTs_OCl were reacted with acrylic acid (AA). The product, AA modified CNTs_OCl (CNTs_OCl-AA) was used to prepare the (CNTs_OCl-AA-AM) nanocomposite hydrogels, where anhydride groups were tethered to the surface of the CNTs_OCl-AA. The swelling process in water was evaluated as a consequence of the anhydride group hydrolysis, which broke some chemical links between CNTs_OCl-AA and crosslinked AA-AM network. Equilibrium-swelling values of all hydrogels increased as the content of AA increased and were larger for AA-AM hydrogels than for CNTs_OCl-AA-AM nanocomposite hydrogels. Young’s moduli of CNTs_OCl-AA-AM nanocomposite hydrogels prepared with 1 or 2?wt.% AA, reached larger values than those measured for AA-AM hydrogels. This tendency was reversed when the AA content was raised to 3?wt.%.     

Understanding interactions between poly(styrene-co-sodium styrene sulfonate) and single-walled carbon nanotubes

Understanding formation mechanisms of hybrids of carbon nanotubes (CNTs) wrapped by polymers and their interactions is critical in modifying solubility of CNTs in aqueous solution and developing new nanotube-based polymer materials. In the present work, we investigate the structural details of poly(styrene-co-sodium styrene sulfonate) (PSS) wrapping around the CNT and the interactions between the PSS chain and the CNT using molecular dynamics (MD) simulations. The fraction of sulfonated groups significantly influences the wrapping conformations of the PSS chain. Due to limited time scale in the MD simulations, two different initial conformations of the chains are introduced to explore the effect of the initial state on the wrapping behavior. When the chains initially wrap around the CNT in a perfect helix manner, more compact pseudo-helical conformations are obtained. For initial straight line arrangement of the chain monomers, the chains adopt looser wrapping conformations. The free-energy analysis and binding interaction of the PSS chain on the CNT surface take a glance on the relationship between the conformational transition of the chain and the energy evolution.     

Interaction of single-walled carbon nanotubes with poly(propyl ether imine) dendrimers

We study the complexation of nontoxic, native poly(propyl ether imine) dendrimers with single-walled carbon nanotubes (SWNTs). The interaction was monitored by measuring the quenching of inherent fluorescence of the dendrimer. The dendrimer-nanotube binding also resulted in the increased electrical resistance of the hole doped SWNT, due to charge-transfer interaction between dendrimer and nanotube. This charge-transfer interaction was further corroborated by observing a shift in frequency of the tangential Raman modes of SWNT. We also report the effect of acidic and neutral pH conditions on the binding affinities. Experimental studies were supplemented by all atom molecular dynamics simulations to provide a microscopic picture of the dendrimer-nanotube complex. The complexation was achieved through charge transfer and hydrophobic interactions, aided by multitude of oxygen, nitrogen, and n-propyl moieties of the dendrimer.     

Rapid and precise release from nano-tracted poly(N-isopropylacrylamide) hydrogels containing linear poly(acrylic acid)

We investigated the rapid and precise molecular release from hydrogels in response to dual stimuli. To achieve precise on/off drug release using thermoresponsive poly(N-isopropylacrylamide) hydrogels, we prepared nano-structured semi-IPNs, which consisted of thermosensitive PNIPAAm networks penetrated by pH-responsive poly(acrylic acid) (PAAc) linear chains and perforated to create nano-tracts as a molecular pathway. The present nano-tracted semi-IPNs show a rapid deswelling response to both temperature and pH. Model drug releases were investigated when simultaneous changes in temperature and pH were applied. We observed that the cationic drug was rapidly released and then abruptly discontinued from the nano-tracted semi-IPNs in response to the dual stimuli, and clear release and stopping cycles were repeatedly observed on successive steps. Moreover, the release rates and amount of drug released were controllable by the deswelling speed of the gels and the PAAc content inside the gels. This novel release system using the nano-tracted semi-IPNs may be useful for the high performance, pulsed release of molecules.     

Molecular mobility in hydrogels based on poly(acrylic acid) and macrodiisocyanates

Partially water-swellable polymer networks were synthesized on the basis of poly(acrylic acid) and various macrodiisocyanates. Hydrophilic and hydrophobic local regions were revealed in swollen networks (hydrogels) by means of the spin probe technique. The local mobility in hydrophobic regions depends on the macrodiisocyanate structure; however, it is substantially lower than that in hydrophilic regions for all gels. It was assumed that the presence of hydrophobic and hydrophilic regions and the difference in their local dynamics must have a substantial effect on the pharmacokinetics of release of drugs immobilized in these hydrogels.     

Activity of counterions in hydrogels based on poly(acrylic acid) and poly(methacrylic acid): Potentiometric measurements

The behavior of partially ionized weakly crosslinked gels based on poly(acrylic acid) and poly(methacrylic acid) undergoing contraction in the presence of a low-molecular-mass salt is studied experimentally. The concentration dependences of the enthalpies of swelling of gels in water and aqueous solutions with potassium chloride concentrations of 1, 10, and 100 mmol/L are determined via the method of isothermal calorimetry. On the basis of the obtained data, the enthalpy parameter of interaction between a polymer network and a medium is estimated as a function of the amount of the salt. This parameter does not exceed 0.3 and monotonically decreases with an increase in the concentration of the salt. The Donnan potential of gels depending on the concentration of KCl in the external solution is measured via the method of potentiometry with the use of capillary electrodes, and the activity of potassium counterions in the medium of hydrogel is calculated. The main factor that causes contraction of polyelectrolyte gels in a solution of a low-molecular-mass salt is a decline in the activity of counterions that leads to a decrease in the osmotic pressure inside the gel. A decline in activity may be associated with both a reduction in the activity coefficient and ionic association processes in the hydrogel.     

Assembly of nanotubes of poly(4-vinylpyridine) and poly(acrylic acid) through hydrogen bonding

Nanotubes of poly(4-vinylpyridine) (PVP) and poly(acrylic acid) (PAA) were fabricated by hydrogen bonding based on layer-by-layer (LbL) assembly. The uniform and flexible tubular structures were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). FTIR and X-ray photoelectron spectroscopy (XPS) measurements confirm the formation of hydrogen bonds in the assembled nanotubes. PAA can be released from the assembled PAA/PVP nanotubes in a basic aqueous solution to give the walls of the tubes a porous structure. Such assembled nanotubes can be considered as carriers for catalysts or drugs, especially in aqueous solution against capillary force.     

Radiation synthesis of superabsorbent poly(acrylic acid)–carrageenan hydrogels

A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from 320 to 800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)–carrageenan hydrogels with high gel fraction (80%) and very high EDS (800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1–5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.     

Interaction of single-walled carbon nanotubes with sulfuric acid

An increase in the radiation yield of paramagnetic centers in H₂SO₄ + nanotubes (NTs) solutions was evidence of the sensitizing influence of NTs on the low-temperature radiolysis of sulfuric acid, that is, on excitation energy and charge transfer. Under the conditions selected, the influence of NTs extended to distances of 100–300 nm. The presence of NTs also influenced the interstice nanodiffusion of atomic hydrogen by decreasing kinetic heterogeneity of the vitrified matrix surrounding NTs. No chemical interaction between atomic hydrogen and carbon NTs was observed at 77–120 K. The diffusion of radical-base anions occurred following the vacancy mechanism and was independent of the presence of NTs. Nanotubes did not form a separate phase as sulfuric acid solutions were cooled to 77 K. The transition from the vitreous to supercooled liquid state was observed as irradiated and nonirradiated solutions were heated to 175 K; no phase transitions occurred over the temperature range 180–300 K. For the first time, substantial changes in the electronic spectra of sulfuric acid solutions of NTs with time were observed: an intense additional absorption band at 320 nm appeared in the spectra in several days. This band was supposedly related to the formation of complexes between H₂SO₄ molecules and the surface of NTs.     

Sidewall carboxylic acid functionalization of single-walled carbon nanotubes

The reactions of single-walled carbon nanotubes (SWNTs) with succinic or glutaric acid acyl peroxides in o-dichlorobenzene at 80-90 degrees C resulted in the addition of 2-carboxyethyl or 3-carboxypropyl groups, respectively, to the sidewalls of the SWNT. These acid-functionalized SWNTs were converted to acid chlorides by derivatization with SOCl(2) and then to amides with terminal diamines such as ethylenediamine, 4,4'-methylenebis(cyclohexylamine), and diethyltoluenediamine. The acid-functionalized SWNTs and the amide derivatives were characterized by a set of materials characterization methods including attenuated total reflectance (ATR) FTIR, Raman and solid state (13)C NMR spectroscopy, transmission electron microscopy (TEM), and thermal gravimetry-mass spectrometry (TG-MS). The degree of SWNT sidewall functionalization with the acid-terminated groups was estimated as 1 in 24 carbons on the basis of TG-MS data. In comparison with the pristine SWNTs, the acid-functionalized SWNTs show an improved solubility in polar solvents, for example, alcohols and water, which enables their processing for incorporation into polymer composite structures as well as for a variety of biomedical applications.     

Highly stretchable and self-healing hydrogels based on poly(acrylic acid) and functional POSS

Herein, we present a novel way for the production of self-healing hydrogels with stretch beyond 4200% than their initial length and relatively high tensile strength(0.1?0.25 MPa). Furthermore, the hydrogel was insensitive to notch. Even for the samples containing V-notches, a stretch of 2300% was demonstrated. The hydrogels were developed by in situ crosslinking of the self-assembled colloidal poly(acrylic acid)(PAA)/functionalized polyhedral oligomeric silsesquioxane(POSS) micelles. This was achieved by the addition of functionalized polyhedral oligomeric silsesquioxane with tertiary amines and hydroxyls(POSS-AH) into the PAA reaction solution. The POSS-AH led to micellar growth, then the dualcrosslinked network was constructed. One type of crosslink was formed by hydrogen-bonding and ionic interactions between PAA chains and POSS-AH, the other type of crosslink was formed by covalent bonds between PAA and bis(N,N'-methylenebis-acrylamide).     

Electrochemical capacitance of the composite of poly (3,4-ethylenedioxythiophene) and functionalized single-walled carbon nanotubes

The homogenous coating of poly (3,4-ethylenedioxythiophene) (PEDOT) on carbon nanotubes was realized by using functionalization of single-walled carbon nanotubes (SWNTs) in this study. Consequently, the PEDOT/functionalized SWNTs (PEDOT/F-SWNTs) composites, with size of around 100nm, which is much smaller than that of PEDOT, were prepared by the electrochemical method. Its small granule increased the active/nonactive mass ratio and reduced the ions diffusion length. Therefore, its specific capacitance of the composite was up to 200F g^?1, which was remarkably greater than that of PEDOT. Furthermore, the PEDOT/F-SWNTs composites had very rapid charge/discharge ability with specific capacitance of 180F g^?1 at scanning rate of 200mV s^?1 and 170F g^?1 at frequency of 1Hz, which is an important practical advantage. In addition, such composite had a good cycling performance and a wide potential window.     

Bioelectrochemical single-walled carbon nanotubes

Metalloproteins and enzymes can be immobilized on SWNTs of different surface chemistry. The combination of high surface area, robust immobilization and inherent nanotube electrochemical properties is of promising application in bioelectrochemistry.     

Dispersion of single-walled carbon nanotubes in alcohol-cholic acid mixtures

A procedure for dispersing single-walled carbon nanotubes (SWNTs) for the preparation of suspensions with high concentrations of individual nanotubes in various solvents was described. The most stable suspensions were obtained from a mixture of ethanol with cholic acid at an acid concentration of 0.018 mol/kg.     

Individual single-walled nanotubes and hydrogels made by oxidative exfoliation of carbon nanotube ropes

Single-walled carbon nanotubes were oxidized by a technique previously developed for the oxidation of graphite to graphite oxide (GO). This process involves treatment with concentrated H(2)SO(4) containing (NH(4))(2)S(2)O(8) and P(2)O(5), followed by H(2)SO(4) and KMnO(4). Oxidation results in complete exfoliation of nanotube ropes to yield individual oxidized tubes that are 40-500 nm long. The C:O:H atomic ratio of vacuum-dried oxidized nanotubes is approximately 2.7:1.0:1.2. XPS and IR spectra show evidence for surface O-H, C=O, and COOH groups. The oxidized nanotubes slowly form viscous hydrogels at unusually low concentration (>or=0.3 wt %), and this behavior is attributed to the formation of a hydrogen-bonded nanotube network. The oxidized tubes bind readily to amine-coated surfaces, on which they adsorb as smooth and dense monolayer films. Thin films of the oxidized nanotubes show ohmic current-voltage behavior, with resistivities in the range of 0.2-0.5 Omega-cm.     

Swelling kinetics of poly(aspartic acid)/poly(acrylic acid) semi‐interpenetrating polymer network hydrogels in urea solutions

Semi‐interpenetrating network (semi‐IPN) hydrogels, composed of poly(aspartic acid) (PAsp) and poly(acrylic acid) (PAAc) with various ratios of PAsp to AAc, were prepared. In this work, swelling kinetics was investigated through calculating some parameters. The swelling ratios were measured at room temperature, using urea solutions as liquids to be absorbed. Compared to in deionized water, the hydrogels showed larger swelling ratios in urea solutions, which might be attributed to the chemical composition of urea. The equilibrium swelling ratio could achieve 600 g/g, and the equilibrium urea/water contents were more than 0.99. The diffusion exponents were between 0.5 and 0.7, suggesting that the solvent transport into the hydrogel was dominated by both diffusion and relaxation controlled systems. Therefore, the PAsp/PAAc semi‐IPN hydrogels were appropriate to carry substances in a urea/water environment for pharmaceutical, agricultural, environmental, and biomedical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 666–671, 2010     

Butylamide-terminated poly(amidoamine) dendritic gelators

Butylamide-terminated poly(amidoamine) dendrons with either a Boc group (C-n (n = 1, 2, 3)) or a carboxyl group (E-n (n = 1, 2)) at the focal point, as a new kind of dendritic gelators, were synthesized and their gelation properties were studied by TEM, WAXD, SAXS, NMR,and FTIR spectroscopy. It was found that the structure of focal groups impacted greatly on their gelation ability and the dendrons with higher generations facilitated the gel phase assembly. Hydrogen-bonding and hydrophobic interactions were proved to be the main driving forces responsible for the fibrous assembly with the diameter in the range of 30-100 nm. The molecular packing pattern of the xerogels of C-2, C-3, E-1, and E-2 all showed a lamellar structure, which was revealed by WAXD and SAXS.     

Temperature-induced nucleation of poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene) crystallization by HiPco single-walled carbon nanotubes

Hybrid systems of the conjugated organic polymer poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene)(PmPV) and HiPco single-walled carbon nanotubes (SWNTs) are explored using spectroscopic and thermal techniques to determine specific interactions. Vibrational spectroscopy indicates a weak interaction, and this is further elucidated using differential scanning calorimetry (DSC), confocal laser scanning microscopy, temperature-dependent Raman spectroscopy, and temperature-dependent infrared spectroscopy of the raw materials and the composite. An endothermic transition is observed in the DSC of both the polymer and the 0.1% HiPco composite in the region of 50 degrees C. Also observed in the DSC of the composite is a double-peaked endotherm at -39 and -49 degrees C, which does not appear in the polymer. The Raman spectroscopy of the polymer upon increasing the temperature to 60 degrees C shows a diminished cis-vinylene mode at 1575 cm(-1), with an increase in relative intensity of the trans-vinylene mode at 1630 cm(-1). Partially irreversible change in isomerization suggests increased order in the polymer. This change in the polymer is also manifest in the Raman composite spectrum upon increase of the temperature to 60 degrees C, where the spectrum becomes abruptly dominated by nanotubes. Raman spectroscopy of the composite shows no change at -35 degrees C; however, infrared absorption measurements suggest that the transition at -35 degrees C derives from the polymer side chains. Here the composite at -35 degrees C shows a change in the absorbance of the polymer side chain aryl-oxide linkage at 1250 cm(-1) and alkyl-oxide stretch at 1050 cm(-1). Infrared spectra thus suggest that the transitions in the lower temperature region around -35 degrees C are side chain-induced, while Raman spectra suggest that the transition at 60 degrees C is backbone-induced. Furthermore, temperature cycling induces an irreversible decrease in the mean fluorescence intensity of the polymer, coupled with a further reduction in the mean fluorescence intensity of the composite. This suggests that an increase in crystallization of the composite is supported and enhanced by an increase in ordering of the polymer. Implications are discussed.