Neutral and cationic phosphoramide adducts of silicon tetrachloride: synthesis and characterization of their solution and solid-state structures

The solution and solid-state structures of hexamethylphosphoramide (HMPA) adducts of tetrachlorosilane (SiCl4) are discussed. In solution, the meridional and facial isomers of the hexa-coordinate cationic complex 3 HMPASiCl3 + Cl(-) (2) predominate at all HMPA concentrations, and are in equilibrium with the hexa-coordinate neutral trans- and cis-2 HMPASiCl4 complexes (1), as well as the penta-coordinate cationic cis-2 HMPASiCl3 + Cl(-) (3). Single crystal X-ray analyses are reported for the ionized mer-3 HMPASiCl3 + HCl2 (-) and the neutral trans-2 HMPASiCl4 complexes.     

Lewis acid stabilized OPI3: implications for the nature of free OPI3

While reinvestigating the published synthesis of OPI(3), it became evident from the experiments that phosphoryl triodide may only be formed as an intermediate and that the end products of the reaction of OPCl(3) with LiI are P(V) oxides, PI(3), I(2), and LiCl. This is also in agreement with MP2/TZVPP calculations, which assign Delta(r)H degrees (Delta(r)G degrees ) [Delta(r)G degrees in CHCl(3)] for the disproportionation of OPI(3) as -7 (-18) [-17 kJ mol(-1)] (assuming P(4)O(10) as the P(V) oxide). The first products of this reaction visible in a low-temperature in situ (31)P NMR experiment are P(2)I(4) and PI(3), as well as traces of a compound that may be OPCl(2)I. By contrast, it was possible to prepare and structurally characterize Lewis acid [A] stabilized [A]<--OPX(3) adducts, where [A] is Al(OR(F))(3) for X=Br and Al(OR(F))(2)(mu-F)Al(OR(F))(3) for X=I (R(F)=C(CF(3))(3)). These adducts are formed on decomposition of PX(4) (+)[Al(OR(F))(4)](-); high yields of Br(3)PO-->Al(OR(F))(3) (delta((31)P)=-65) were obtained, while I(3)PO-->Al(OR(F))(3) (delta((31)P)=-337) and I(3)PO-->Al(OR(F))(2)(mu-F)Al(OR(F))(3) (delta((31)P)=-332) are only formed as by-products. The main product of the room-temperature decomposition of PI(4) (+)[Al(OR(F))(4)](-) is PI(4) (+)[(R(F)O)(3)Al(mu-F)Al(OR(F))(3)](-), which was also characterized by X-ray crystallography and was independently prepared from Ag(+)[(R(F)O)(3)Al(mu-F)Al(OR(F))(3)](-), PI(3), and I(2).     

Removable directing groups in organic synthesis and catalysis

Directing groups have been widely used in recent years to achieve control over all aspects of reaction selectivity in a wide range of transformations involving transition-metal catalysis and organometallic reagents. In cases when the existing functional group within a substrate is unsuited to achieve efficient intramolecular delivery of a reagent or catalyst, the specific introduction of an appropriately designed removable reagent-directing group can be a solution to this problem. In this Review we give an overview of the state of the art in this area, including the stoichiometric and catalytic use of directing groups.     

Theoretical investigation of electron transfer transition in tetracyanoethylene-contained organic complexes

In this work, the authors use complete active space self-consistent field method to investigate the photoinduced charge-separated states and the electron transfer transition in complexes ethylene-tetracyanoethylene and tetramethylethylene-tetracyanoethylene. Geometries of isolated tetracyanoethylene, ethylene, and tetramethylethylene have been optimized. The ground state and the low-lying excited states of ethylene and tetracyanoethylene have been optimized. The state energies in the gas phase have been obtained and compared with the experimentally observed values. The torsion barrier of tetracyanoethylene has been investigated through the state energy calculation at different conformations. Attention has been particularly paid to the charge-separated states and the electron transfer transition of complexes. The stacked conformations of the donor-acceptor complexes have been chosen for the optimization of the ground and low-lying excited states. Equilibrium solvation has been considered by means of conductor-like screening model both in water and in dichloromethane. It has been found that the donor and tetracyanoethylene remain neutral in complexes in ground state (1)A(1) and in lowest triplet state (3)B(1), but charge separation appears in excited singlet state (1)B(1). Through the correction of nonequilibrium solvation energy based on the spherical cavity approximation, pi-->pi* electron transfer transition energies have been obtained. Compared with the experimental measurements in dichloromethane, the theoretical results in the same solvent are found higher by about 0.5 eV.     

Pyrene-derived novel one- and two-component organogelators

A new class of alkyl-chain-appended pyrene derivatives 4-14 were synthesized and evaluated for their gelation abilities. Depending on the nature of the linking group, these compounds gelated a number of organic solvents, either in the presence or in the absence of the acceptor molecule 2,4,7-trinitrofluorenone (TNF). Compounds with ester, ether, or alkyl linkages gelated a number of hydroxylic and hydrocarbon solvents by means of a charge-transfer interaction with TNF, while compounds with amide, urethane and urea linkers formed gels on their own in a variety of solvents by means of pi-pi stacking and hydrogen-bonding interactions. The Xray crystal structure of urethane (S)-12 showed hydrogen-bonding and stacking features, as suggested by the model. The gels obtained were investigated by spectroscopic and electron microscopic techniques which provided structural insights.     

Assessable consequences of through-bond donor-acceptor interactions in beta-aminoketones

Reported are the syntheses of ester-functionalized (6-8) and alkyl-substituted (9) 1-aza-adamantanones; the easy handling of the compounds provides an opportunity to comprehensively study the fundamental changes in structure and reactivity that can accompany the donor-acceptor arrangement in rigid beta-aminoketones. X-ray structural analysis of trione 6 and dione 7 reveals bond length and angle variations consistent with through-bond (hyperconjugative) donor-acceptor interactions. Observed is a shortening of the C-N bond, elongation of the central C-C bond (to approximately 1.6 A), and a significant pyramidalization of the carbonyl carbon within the donor-sigma-acceptor pathway. UV/Vis spectra of 6-9 show a new absorption maximum (lambda(max)=260-275 nm in three solvents), the so-called "sigma-coupled transition"; the molar absorptivity scales with the number of carbonyl groups (for trione 6, epsilon approximately 3000, for dione 7, epsilon approximately 2000) and the band reversibly disappears upon addition of acid. IR and (13)C NMR spectroscopic data show trends consistent with through-bond donation to the carbonyl acceptor groups and commensurate weakening of the carbonyl pi bond. High yielding acid-mediated fragmentations are used to illustrate the effects of the donor-acceptor arrangement on the reactivity of the molecules. Given that donor-sigma-acceptor molecules have recently been found to show self-assembly behavior and macromolecular properties linked to their unusual structure, the current analysis encourages further consideration of the systems in advanced materials applications.     

Divalent carbon(0) chemistry, part 2: Protonation and complexes with main group and transition metal Lewis acids.

Quantum-chemical calculations with DFT (BP86) and ab initio methods (MP2, SCS-MP2) were carried out for protonated and diprotonated compounds N-H(+) and N-(H(+))(2) and for the complexes N-BH(3), N-(BH(3))(2), N-CO(2), N-(CO(2))(2), N-W(CO)(5), N-Ni(CO)(3) and N-Ni(CO)(2) where N=C(PH(3))(2) (1), C(PMe(3))(2) (2), C(PPh(3))(2) (3), C(PPh(3))(CO) (4), C(CO)(2) (5), C(NHC(H))(2) (6), C(NHC(Me))(2) (7) (Me(2)N)(2)C==C==C(NMe(2))(2) (8) and NHC (9) (NHC(H)=N-heterocyclic carbene, NHC(Me)=N-substituted N-heterocyclic carbene). Compounds 1-4 and 6-9 are very strong electron donors, and this is manifested in calculated protonation energies that reach values of up to 300 kcal mol(-1) for 7 and in very high bond strengths of the donor-acceptor complexes. The electronic structure of the compounds was analyzed with charge- and energy-partitioning methods. The calculations show that the experimentally known compounds 2-5 and 8 chemically behave like molecules L(2)C which have two L-->C donor-acceptor bonds and a carbon atom with two electron lone pairs. The behavior is not directly obvious when the linear structures of carbon suboxide and tetraaminoallenes are considered. They only come to the fore on reaction with strong electron-pair acceptors. The calculations predict that single and double protonation of 5 and 8 take place at the central carbon atom, where the negative charge increases upon subsequent protonation. The hitherto experimentally unknown carbodicarbenes 6 and 7 are predicted to be even stronger Lewis bases than the carbodiphosphoranes 1-3.     

Donor-substituted 1,1,4,4-tetracyanobutadienes (TCBDS): new chromophores with efficient intramolecular charge-transfer interactions by atom-economic synthesis

A wide variety of monomeric and oligomeric, donor-substituted 1,1,4,4-tetracyanobutadienes (TCBDs) have been synthesized by [2+2] cycloaddition between tetracyanoethylene (TNCE) and donor-substituted alkynes, followed by electrocyclic ring opening of the initially formed cyclobutenes. Reaction yields are often nearly quantitative but can be affected by the electron-donating power and steric demands of the alkyne substituents. The intramolecular charge-transfer (CT) interactions between the donor and TCBD acceptor moieties were comprehensively investigated by X-ray crystallography, electrochemistry, UV-visible spectroscopy, and theoretical calculations. Despite the nonplanarity of the new chromophores, which have a substantial twist between the two dicyanovinyl planes, efficient intramolecular CT interactions are observed, and the crystal structures demonstrate a high quinoid character in strong donor substituents, such as N,N-dimethylanilino (DMA) rings. The maxima of the CT bands shift bathochromically upon reduction of the amount of conjugative coupling between strong donor and acceptor moieties. Each TCBD moiety undergoes two reversible, one-electron reduction steps. Thus, a tri-TCBD derivative with a 1,3,5-trisubstituted benzene core shows six reversible reduction steps within an exceptionally narrow potential range of 1.0 V. The first reduction potential E(red,1) is strongly influenced by the donor substitution: introduction of more donor moieties causes an increasingly twisted TCBD structure, a fact that results in the elevation of the LUMO level and, consequently, a more difficult first reduction. The potentials are also strongly influenced by the nature of the donor residues and the extent of donor-acceptor coupling. A careful comparison of electrochemical data and the correlation with UV-visible spectra made it possible to estimate unknown physical parameters such as the E(red,1) of unsubstituted TCBD (-0.31 V vs Fc+/Fc) as well as the maxima of highly broadened CT bands. Donor-substituted TCBDs are stable molecules and can be sublimed without decomposition. With their high third-order optical nonlinearities, as revealed in preliminary measurements, they should become interesting chromophores for ultra-thin film formation by vapor deposition techniques and have applications in opto-electronic devices.     

Nanoscale structural and electronic properties of ultrathin blends of two polyaromatic molecules: a Kelvin probe force microscopy investigation.

We describe a Kelvin Probe Force Microscopy (KPFM) study on the morphological and electronic properties of complex mono and bi-molecular ultrathin films self-assembled on mica. These architectures are made up from an electron-donor (D), a synthetic all-benzenoid polycyclic aromatic hydrocarbon, and an electron-acceptor (A), perylene-bis-dicarboximide. The former molecule self-assembles into fibers in single component films, while the latter molecule forms discontinuous layers. Taking advantage of the different solubility and self-organizing properties of the A and D molecules, multicomponent ultrathin films characterized by nanoscale phase segregated fibers of D embedded in a discontinuous layer of A are formed. The direct estimation of the surface potential, and consequently the local workfunction from KPFM images allow a comparison of the local electronic properties of the blend with those of the monocomponent films. A change in the average workfunction values of the A and D nanostructures in the blend occurs which is primarily caused by the intimate contact between the two components and the molecular order within the nanostructure self-assembled at the surface. Additional roles can be ascribed to the molecular packing density, to the presence of defects in the film, to the different conformation of the aliphatic peripheral chains that might cover the conjugated core and to the long-range nature of the electrostatic interactions employed to map the surface by KPFM limiting the spatial and potential resolution. The local workfunction studies of heterojunctions can be of help to tune the electronic properties of active multicomponent films, which is crucial for the fabrication of efficient organic electronic devices as solar cells.     

Intramolecular triplet energy transfer in donor-acceptor molecules linked by a crown ether bridge

Bichromophoric compounds BP-C-NP and BP-C-NBD were synthesized with benzophenone chromophore (BP) as the donor, and 2-naphthyl (NP) and norbornadiene group (NBD) as the acceptor, respectively. Their intramolecular triplet energy transfer was examined. The bridges linking the donor and acceptors in these molecules involve a crown ether moiety complexing a sodium ion. Phosphorescence quenching, flash photolysis and photosensitized isomerization experiments indicate that intramolecular triplet energy transfer occurs with rate constants of about 3.3 x 10(5) and 4.8 x 10(5) s(-1) and efficiencies of about 33 and 42 % for BP-C-NP and BP-C-NBD, respectively. Theoretical calculations indicate that these molecules adopt conformations below room temperature which allow their two-end chromophores conducive to through-space energy transfer.     

Enhanced functionality for donor-acceptor oligothiophenes by means of inclusion of BODIPY: synthesis, electrochemistry, photophysics, and model chemistry

We have synthesized several new push-pull oligothiophenes based on the boron dipyrromethene (BODIPY) moiety as the electron acceptor and the more well-known oligothiophenes substituted with N,N-dialkylamino functions to enhance their electron-donor ability. A complete characterization of the electronic properties has been carried out; it consists of their photophysical, electrochemical, and vibrational properties. The compounds have been studied after chemical treatment with acids and after oxidation. In this regard, they can be termed as NIR dyes and amphoteric redox electroactive molecules. We have described the presence of dual fluorescence in these molecules and fluorescence quenching either by energy transfer or, in the push-pull molecules, by electron exchange. The combination of electrochemical and proton reversibility along with the interesting optical properties of the new species offer an interesting platform for sensor and material applications.     

Annelated Pyridines as Highly Nucleophilic and Lewis Basic Catalysts for Acylation Reactions

New heterocyclic derivatives of 9‐azajulolidine have been synthesized and characterized with respect to their nucleophilicity and Lewis basicity. The Lewis basicity of these bases as quantified through their theoretically calculated methyl‐cation affinities correlate well with the experimentally measured reaction rates for addition to benzhydryl cations. All newly synthesized pyridines show exceptional catalytic activities in benchmark acylation reactions, which correlate only poorly with Lewis basicity or nucleophilicity parameters. A combination of Lewis basicity with charge and geometric parameters in the framework of a three‐component quantitative structure–activity relationship (QSAR) model is, however, highly predictive.