Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

Oxo transfer reactions mediated by bis(dithiolene)tungsten analogues of the active sites of molybdoenzymes in the DMSO reductase family: comparative reactivity of tungsten and molybdenum.

The discovery of tungsten enzymes and molybdenum/tungsten isoenzymes, in which the mononuclear catalytic sites contain a metal chelated by one or two pterin-dithiolene cofactor ligands, has lent new significance to tungsten-dithiolene chemistry. Reaction of [W(CO)(2)(S(2)C(2)Me(2))(2)] with RO(-) affords a series of square pyramidal desoxo complexes [W(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (1) and Pr(i)() (3). Reaction of 1 and 3 with Me(3)NO gives the cis-octahedral complexes [W(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (6) and Pr(i)() (8). These W(IV,VI) complexes are considered unconstrained versions of protein-bound sites of DMSOR and TMAOR (DMSOR = dimethylsulfoxide reductase, TMAOR = trimethylamine N-oxide reductase) members of the title enzyme family. The structure of 6 and the catalytic center of one DMSO reductase isoenzyme have similar overall stereochemistry and comparable bond lengths. The minimal oxo transfer reaction paradigm thought to apply to enzymes, W(IV) + XO --> W(VI)O + X, has been investigated. Direct oxo transfer was demonstrated by isotope transfer from Ph(2)Se(18)O. Complex 1 reacts cleanly and completely with various substrates XO to afford 6 and product X in second-order reactions with associative transition states. The substrate reactivity order with 1 is Me(3)NO > Ph(3)AsO > pyO (pyridine N-oxide) > R(2)SO > Ph(3)PO. For reaction of 3 with Me(3)NO, k(2) = 0.93 M(-)(1) s(-)(1), and for 1 with Me(2)SO, k(2) = 3.9 x 10(-)(5) M(-)(1) s(-)(1); other rate constants and activation parameters are reported. These results demonstrate that bis(dithiolene)W(IV) complexes are competent to reduce both N-oxides and S-oxides; DMSORs reduce both substrate types, but TMAORs are reported to reduce only N-oxides. Comparison of k(cat)/K(M) data for isoenzymes and k(2) values for isostructural analogue complexes reveals that catalytic and stoichiometric oxo transfer, respectively, from substrate to metal is faster with tungsten and from metal to substrate is faster with molybdenum. These results constitute a kinetic metal effect in direct oxo transfer reactions for analogue complexes and for isoenzymes provided the catalytic sites are isostructural. The nature of the transition state in oxo transfer reactions of analogues is tentatively considered. This research presents the first kinetics study of substrate reduction via oxo transfer mediated by bis(dithiolene)tungsten complexes.     

Coinage metal complexes of a boron-substituted soft scorpionate ligand

An improved synthesis of lithium phenyltris(methimazolyl)borate, Li[PhTm(Me)], (methimazole = 1-methylimidazole-2-thione) is described, and the structure of the methanol-solvated [Li(OHMe)4][PhTm(Me)] has been determined. The syntheses and characterization of complexes [M(PhTm(Me))(PR3)] (M = Cu, Ag, Au; R = Et, Ph;) are reported, and the complexes [Cu(PhTm(Me))(PPh3)], [Ag(PhTm(Me))(PEt3)] and [Au(PhTm(Me))(PEt3)] are crystallographically characterized, showing a progression from pseudo-tetrahedral geometry (copper, S3P coordination) to trigonal planar geometry (silver, S2P coordination) to linear geometry (gold, SP coordination). In addition, the copper(I) and silver(I) triphenylphosphine complexes of the adventitiously formed phenylhydrobis(methimazolyl)borate ligand, [M(PhBm(Me))(PPh3)], have been crystallographically characterized, showing both species to have a trigonal planar primary coordination sphere, with a secondary M...H-B interaction. Finally, reaction of copper(II) chloride with Li[PhTm(Me)] results in formation of a compound analyzing as [Cu(II)(PhTm(Me))Cl], although its extreme insolubility and marked instability have precluded its complete characterization. Attempts to prepare this by ultra-slow diffusion of the reactants through solvent blanks has led to isolation of a mixed-valence copper(I/II) methimazolate cluster, [Cu(I)10Cu(II)2(mt)12Cl2] and a copper(I) dimeric complex [Cu2(PhTm(Me))2], indicating that copper(II) ions oxidatively decompose the phenyltris(methimazolyl)borate anion.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Experimental and theoretical investigations on the catalytic hydrosilylation of carbon dioxide with ruthenium nitrile complexes

Ruthenium complexes, mer-[RuX(3)(MeCN)(3)] and cis/trans-[RuX(2)(MeCN)(4)] with X=Br, Cl, were investigated as precatalysts in homogeneously catalyzed hydrosilylation of CO(2). The oxidation state of ruthenium and nature of the halide in the precatalysts were found to influence the catalytic activity in the conversion of Me(2)PhSiH to the formoxysilane Me(2)PhSiOCHO, with Ru(III) having chloride ligands being most active. Monitoring the reactions by in-situ IR spectroscopy in MeCN as the solvent indicates an interaction of the precatalyst with the silane prior to activation of CO(2). In the absence of CO(2), hydrosilylation of the MeCN solvent occurs. Catalytic activity in CO(2) hydrosilylation is enhanced by Me(2)PhSiCl, generated during reduction of Ru(III) in mer-[RuX(3)(MeCN)(3)] to Ru(II) or, when added as promoter to Ru(II) precatalysts. The reaction mechanism for the catalytic cycle has been calculated by DFT methods for the reaction of Me(3)SiH. The key steps are: Transfer of the Me(3)Si moiety to a coordinated halide ligand, resulting in an L(n)RuH(XSiMe(3)) intermediate --> CO(2) coordination --> Me(3)Si transfer to CO(2) --> reductive elimination of formoxysilane product. This reaction sequence is more favorable energetically for chloride complexes than for the analogous bromide complexes, which accounts for their differences in catalytic activity. Calculations also explain the rate increase observed experimentally in the presence of Me(2)PhSiCl. A parallel reaction pathway leads to (Me(3)Si)(2)O as a minor byproduct which arises from the condensation of two initially formed Me(3)SiOH molecules.     

Dinuclear iron complexes based on parallel beta-diiminato binding sites: syntheses, structures and reaction with O2

With the background that certain natural systems utilize two Fe(II) centres in their prosthetic groups for the activation of O2, a ligand system containing two parallel beta-diiminato binding sites linked by a xanthene backbone ([RXanthdim]2- with residues R = 2,3-dimethylphenyl and 2,4-difluorophenyl at the iminato units, respectively) was investigated with respect to its Fe(II) coordination chemistry in order to study O(2) activation reactions. Hence, the corresponding lithium salts were treated with FeCl2 to yield the complexes [Me2C6H3Xanthdim]Fe2Cl3(Li(thf)3), and [F2C6H3Xanthdim]Fe2Cl3(Li(thf)3), , respectively, each of which comprises Cl-Fe(micro-Cl)Fe-Cl(Li(thf)3) units. and indeed readily react with O2 to give the oxides [RXanthdim]Fe2Cl2O containing Fe(III)-O-Fe(III) moieties. Due to the electron withdrawing F atoms reacts more slowly than . The molecular structures of , and [Me2C6H3Xanthdim]Fe2Cl2O, , as determined by single crystal X-ray diffraction are discussed, and an investigation concerning their magnetic properties revealed an antiferromagnetic coupling of the two iron centres in all complexes; naturally, the strongest coupling is observed for .     

Unusual iron(II) and cobalt(II) complexes derived from monodentate arylamido ligands

The coordination chemistry of the N-substituted arylamido ligands [N(R)(C6H3R'2-2,6)] [R = SiMe3, R' = Me (L1); R = CH2But, R' = Pri (L2)] toward FeII and CoII ions was studied. The monoamido complexes [M(L1)(Cl)(tmeda)] [M = Fe (1), Co (2)] react readily with MeLi, affording the mononuclear, paramagnetic iron(II) and cobalt(II) methyl-arylamido complexes [M(L1)(Me)(tmeda)] [M = Fe (3), Co (4)]. Treatment of 2:1 [Li(L2)(THF)2]/FeCl2 affords the unusual two-coordinate iron(II) bis(arylamide) [Fe(L2)2] (5).     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Electron transfer reactions of peroxydisulfate and fluoroxysulfate reactions with the cyanide complexes M(CN)n4- (M=Fe(II), Ru(II), Os(II), Mo(IV), and W(IV))

The stoichiometry and the kinetics of oxidation of the cyanide complexes M(CN)n4- (M = Fe(II), Ru(II), Os(II), Mo(IV), and W(IV)) by the peroxydisulfate ion, S2O8(2-), and by the much more strongly oxidizing fluoroxysulfate ion, SO4F-, were studied in aqueous solutions containing Li+. Reactions of S2O8(2-) with M(CN)n4- are known to be strongly catalyzed by Li+ and other alkali metal ions, and this applies also to the corresponding reactions of SO4F-. The primary reactions of S2O8(2-) and SO4F- have both been found to be one-electron processes in which the equally strong O-O and O-F bonds are broken. The primary reaction of S2O8(2-) consists of a single step yielding M(CN)n3-, SO4-, and SO42-, whereas the primary reaction of SO4F- comprises two parallel one-electron steps, one leading to M(CN)n3-, SO4-, and F- and the other yielding M(CN)n-1(2-), CN-, SO4- and F-. The relationship between the rate constants and the standard free energies of reaction for the Li+-catalyzed reactions of SO4F- and S2O8(2-) with M(CN)n(4-), and for the uncatalyzed reactions of S2O8(2-) with bipyridyl and phenanthroline complexes MLn2+ (M = Fe(II), Ru(II), and Os(II)) studied previously, suggests that the intrinsic barrier for all three sets of reactions is similar, i.e., unaffected by the Li+ catalysis, and that the electron transfer and the breakage of the O-O and O-F bonds are concerted processes.     

Synthesis and characterization of oxorhenium(v) diamido pyridine complexes that catalyze oxygen atom transfer reactions

The detailed syntheses of complexes 1-4, Re(O)(X)(DAP) (X = Me, 1; Cl, 2; I, 3; OTf (triflate), 4) incorporating the diamido pyridine (DAP) ancillary ligand (2,6-bis((mesitylamino)methyl)pyridine) are described and shown to be effective catalysts for oxygen atom transfer (OAT) reactions of PyO to PPh(3). The catalytic activities are as follows: 4≈3 > 2 > 1. The observed electronic trend is consistent with the turnover limiting reduction of the proposed Re(VII) dioxo intermediate, Re(O)(2)(X)(DAP), during the catalytic cycle. The catalytic activity of complexes 1-3 was compared to previously published diamido amine (DAAm) oxorhenium complexes of the type Re(O)(X)(DAAm) (X = Me, 5; Cl, 6; I, 7 and DAAm = N,N-bis(2-arylaminoethyl)methylamine) which exhibit hydrolytic degradation during the catalytic reaction. Complexes 1-3 displayed higher turnover frequencies compared to 5-7. This higher catalytic activity was attributed to the more rigid DAP ligand backbone, which makes the complexes less susceptible to decomposition. However, another decomposition pathway was proposed for this catalytic system due to the observation of Re(O)(3)((MesNCH(2))(MesNCH)NC(5)H(3)) 8 in which one arm of the DAP ligand is oxidized.     

Synthesis and structural characterization of a series of lanthanide(II) amides: steric effect of amido ligand

The synthesis and structures of a series of lanthanide(II) and lanthanide(III) complexes supported by the amido ligand N(SiMe3)Ar were described. Several lanthanide(III) amide chlorides were synthesized by a metathesis reaction of LnCl3 with lithium amide, including {[(C6H5)(Me3Si)N]2YbCl(THF)}2.PhCH3 (1), [(C6H3-iPr2-2,6)(SiMe3)N]2YbCl(mu-Cl)Li(THF)3.PhCH3 (4), [(C6H3-iPr2-2,6)(SiMe3)N]YbCl2(THF)3 (6), and [(C6H3-iPr2-2,6)(SiMe3)N]2SmCl3Li2(THF)4 (7). The reduction reaction of 1 with Na-K alloy afforded bisamide ytterbium(II) complex [(C6H5)(Me3Si)N]2Yb(DME)2 (2). The same reaction for Sm gave an insoluble black powder. An analogous samarium(II) complex [(C6H5)(Me3Si)N]2Sm(DME)2 (3) was prepared by the metathesis reaction of SmI2 with NaN(C6H5)(SiMe3). The reduction reaction of ytterbium chloride 4 with Na-K alloy afforded monoamide chloride {[(C6H3-iPr2-2,6)(SiMe3)N]Yb(mu-Cl)(THF)2}2 (5), which is the first example of ytterbium(II) amide chloride, formed via the cleavage of the Yb-N bond. The same reduction reaction of 7 gave a normal bisamide complex [(C6H3-iPr2-2,6)(SiMe3)N]2Sm(THF)2 (8) via Sm-Cl bond cleavage. This is the first example for the steric effect on the outcome of the reduction reaction in lanthanide(II) chemistry. 5 can also be synthesized by the Na/K alloy reduction reaction of 6. All of the complexes were fully characterized including X-ray diffraction for 1-7.     

Photoinduced intramolecular electron-transfer reactions of reconstituted met- and zinc-myoglobins appending acridine and methylacridinium ion as DNA-binders

Three types of reconstituted met- and zinc-myoglobin (metMb and ZnMb) dyads, ZnMbAc(4)Me+, ZnMbAc(6)Me+, and metMbAc(6) have been prepared by incorporating chemically modified metalloporphyrin cofactor appending an acridine (Ac) or a methylacridinium ion ([AcMe]+) into apo-Mb. In the bimolecular system between ZnMb and [AcMe]+, the photoexcited triplet state of ZnMb, 3(ZnMb)*, was successfully quenched by [AcMe]+ to form the radical pair of ZnMb cation (ZnMb*+) and reduced methylacridine ([AcMe]*), followed by a thermal back ET reaction. The rate constants for the intermolecular quenching ET (kq) and the back ET reaction (kb) at 25 degrees C were successfully obtained as kq = (8.8 +/- 0.4) x 10(7) M(-1) s(-1) and kb = (1.2 +/- 0.1) x 10(8) M(-1) s(-1), respectively. On the other hand, in case of the intramolecular photoinduced ET reactions of ZnMbAc(4)Me+ and ZnMbAc(6)Me+ dyads, the first-order quenching rate constants (kET) of 3(ZnMb)* by [AcMe]+ moiety were determined to be kET = 2.6 x 10(3) and 2.5 x 10(3) s(-1), respectively. When such ET occurs along the alkyl spacer via through-bond mechanism at the surface of Mb, the obtained kET is reasonable to provide decay constant of beta (1.0-1.3 A(-1)). Upon photoirradiation of [AcMe]+ moiety, kinetic studies also presented the intramolecular quenching reactions from the excited singlet state, 1([AcMe]+)*, whose likely process is the photoinduced energy-transfer reaction. For metMbAc(6) dyad, steady-state fluorescence was almost quenched, while the signal around 440 nm gradually appeared in the presence of various concentrations of DNA. Our study implies that synthetic manipulation at the Mb surface, by using an artificial DNA-binder coupled with photoinduced reaction, may provide valuable information to construct new Mb-DNA complex and sensitive fluorescent for DNA.     

Electron Transfer Reaction between M-C_6H_6 and M~ -C_6H_6 Complexes in the Gas Phase: Density Functional Theory Study

Significant progress has been made in understanding the nature of the transition state andthe paths for electron transfer, especially the influences of environmental factors and themolecular properties on the electron transfer rate. These classical and semi-classical, aswell as quantum-mechanical theory, have been very successful in rationalizing severalstructure-reactivity relationships and in predicting novel features of reactivity. Thesemodels established some links between the electron tra…     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Biphenolate phosphine complexes of tin(IV)

The preparation and structural characterization of tin(IV) complexes supported by (2,2'-phenylphosphino)bis(4,6-di-tert-butylphenolate) ([OPO]2-) are described. The reaction of in-situ prepared Li2[OPO] with SnCl4 in THF at -35 degrees C produced [OPO]SnCl2(THF) as a THF adduct. Addition of SnCl4 to a THF solution of H2[OPO] in the presence of 2 equiv of NEt3 at room temperature led to the formation of the "ate" complex {[OPO]SnCl3}(HNEt3). The metathetical reactions of Li2[OPO] with R2SnCl2 (R=Me, n-Bu) in THF at -35 degrees C generated the corresponding five-coordinate dialkyl complexes [OPO]SnR2. In addition to the multinuclear NMR spectroscopic data for all new compounds, X-ray structures of [OPO]SnCl2(THF), [OPO]SnMe2, and [OPO]Sn(n-Bu)2 are presented.     

Nickel complexes of a bulky beta-diketiminate ligand

Nickel(II) chloride forms a complex with tetrahydrofuran, NiCl(2)(THF)(1.5), that can be used to prepare nickel chloride complexes of a bulky beta-diketiminate ligand L(Me). [L(Me)NiCl](2) and L(Me)NiCl(2)LiTHF(2), which have tetrahedral geometries in the solid state, are in equilibrium with three-coordinate L(Me)NiCl. Thermodynamic parameters for the equilibrium between [L(Me)NiCl](2) and L(Me)NiCl are DeltaH = 51(5) kJ/mol and DeltaS = 116(11) J/(mol.K). L(Me)NiCl forms a tetrahydrofuran complex with a binding constant of 1.2(2) M(-)(1) at 21 degrees C. The chloride complexes were used to generate a three-coordinate nickel(II)-amido complex. This amido complex, L(Me)NiN(SiMe(3))(2), is compared with L(Me)MN(SiMe(3))(2) (M = Mn, Fe, Co) (Panda, A.; Stender, M.; Wright, R. J.; Olmstead, M. M.; Klavins, P.; Power, P. P. Inorg. Chem. 2002, 41, 3909-3916). Trends in the metrical parameters of the three-coordinate L(Me)M(II) amido compounds are similar to the trends in three-coordinate L(tBu)M(II) chloride compounds (Holland, P. L.; Cundari, T. R.; Perez, L. L.; Eckert, N. A.; Lachicotte, R. J. J. Am. Chem. Soc. 2002, 124, 14416-14424).     

Electrophilic attack on sulfur-sulfur bonds: coordination of lithium cations to sulfur-rich molecules studied by ab initio MO methods

Complex formation between gaseous Li+ ions and sulfur-containing neutral ligands, such as H2S, Me2Sn (n = 1-5; Me = CH3) and various isomers of hexasulfur (S6), has been studied by ab initio MO calculations at the G3X(MP2) level of theory. Generally, the formation of LiS(n) heterocycles and clusters is preferred in these reactions. The binding energies of the cation in the 29 complexes investigated range from -88 kJ mol(-1) for [H2SLi]+ to -189 kJ mol(-1) for the most stable isomer of [Me2S5Li]+ which contains three-coordinate Li+. Of the various S6 ligands (chair, boat, prism, branched ring, and triplet chain structures), two isomeric complexes containing the S5==S ligand have the highest binding energies (-163+/-1 kJ mol(-1)). However, the global minimum structure of [LiS6]+ is of C(3v) symmetry with the six-membered S(6) homocycle in the well-known chair conformation and three Li--S bonds with a length of 256 pm (binding energy: -134 kJ mol(-1)). Relatively unstable isomers of S6 are stabilized by complex formation with Li+. The interaction between the cation and the S6 ligands is mainly attributed to ion-dipole attraction with a little charge transfer, except in cations containing the six sulfur atoms in the form of separated neutral S2, S3, or S4 units, as in [Li(S3)2]+ and [Li(S2)(S4)]+. In the two most stable isomers of the [LiS6]+ complexes, the number of S--S bonds is at maximum and the coordination number of Li+ is either 3 or 4. A topological analysis of all investigated complexes revealed that the Li--S bonds of lengths below 280 pm are characterized by a maximum electron-density path and closed-shell interaction.     

Synthesis and reactivity of low-coordinate iron(II) fluoride complexes and their use in the catalytic hydrodefluorination of fluorocarbons

Transition metal fluoride complexes are of interest because they are potentially useful in a multitude of catalytic applications, including C-F bond activation and fluorocarbon functionalization. We report the first crystallographically characterized examples of molecular iron(II) fluorides: [L(Me)Fe(mu-F)]2 (1(2)) and L(tBu)FeF (2) (L = bulky beta-diketiminate). These complexes react with donor molecules (L'), yielding trigonal-pyramidal complexes L(R)FeF(L'). The fluoride ligand is activated by the Lewis acid Et2O.BF3, forming L(tBu)Fe(OEt2)(eta1-BF4) (3), and is also silaphilic, reacting with silyl compounds such as Me3SiSSiMe3, Me3SiCCSiMe3, and Et3SiH to give new thiolate L(tBu)FeSSiMe3 (4), acetylide L(tBu)FeCCSiMe3 (5), and hydride [L(Me)Fe(mu-H)]2 (6(2)) complexes. The hydrodefluorination (HDF) of perfluorinated aromatic compounds (hexafluorobenzene, pentafluoropyridine, and octafluorotoluene) with a silane R3SiH (R3 = (EtO)3, Et3, Ph3, (3,5-(CF3)2C6H3)Me2) is catalyzed by addition of an iron(II) fluoride complex, giving mainly the singly hydrodefluorinated products (pentafluorobenzene, 2,3,5,6-tetrafluoropyridine, and alpha,alpha,alpha,2,3,5,6-heptafluorotoluene, respectively) in up to five turnovers. These catalytic perfluoroarene HDF reactions proceed with activation of the C-F bond para to the most electron-withdrawing group and are dependent on the degree of fluorination and solvent polarity. Kinetic studies suggest that hydride generation is the rate-limiting step in the HDF of octafluorotoluene, but the active intermediate is unknown. Mechanistic considerations argue against oxidative addition and outer-sphere electron transfer pathways for perfluoroarene HDF. Fluorinated olefins are also hydrodefluorinated (up to 10 turnovers for hexafluoropropene), most likely through a hydride insertion/beta-fluoride elimination mechanism. Complexes 1(2) and 2 thus provide a rare example of a homogeneous system that activates C-F bonds without competitive C-H activation and use an inexpensive 3d transition metal.     

Lanthanide amido complexes incorporating amino-coordinate-lithium bridged bis(indolyl) ligands: synthesis, characterization, and catalysis for hydrophosphonylation of aldehydes and aldimines

Two series of new lanthanide amido complexes supported by bis(indolyl) ligands with amino-coordinate-lithium as a bridge were synthesized and characterized. The interactions of [(Me(3)Si)(2)N](3)Ln(III)(μ-Cl)Li(THF)(3) with 2 equiv of 3-(CyNHCH(2))C(8)H(5)NH in toluene produced the amino-coordinate-lithium bridged bis(indolyl) lanthanide amides [μ-{[η(1):η(1):η(1):η(1)-3-(CyNHCH(2))Ind](2)Li}Ln[N(SiMe(3))(2)](2)] (Cy = cyclohexyl, Ind = Indolyl, Ln = Sm (1), Eu (2), Dy (3), Yb (4)) in good yields. Treatment of [μ-{[η(1):η(1):η(1):η(1)-3-(CyNHCH(2))Ind](2)Li}Ln[N(SiMe(3))(2)](2)] with THF gave new lanthanide amido complexes [μ-{[η(1):η(1)-3-(CyNHCH(2))Ind](2)Li(THF)}Ln[N(SiMe(3))(2)](2)] (Ln = Eu (5), Dy (6), Yb (7)), which can be transferred to amido complexes 2, 3, and 4 by reflux the corresponding complexes in toluene. Thus, two series of rare-earth-metal amides could be reciprocally transformed easily by merely changing the solvent in the reactions. All new complexes 1-7 are fully characterized including X-ray structural determination. The catalytic activities of these new lanthanide amido complexes for hydrophosphonylation of both aromatic and aliphatic aldehydes and various substituted aldimines were explored. The results indicated that these complexes displayed a high catalytic activity for the C-P bond formation with employment of low catalyst loadings (0.1 mol?% for aldehydes and 1 mol?% for aldimines) under mild conditions. Thus, it provides a convenient way to prepare both α-hydroxy and α-amino phosphonates.     

Proton-directed redox control of O-O bond activation by heme hydroperoxidase models

Hangman metalloporphyrin complexes poise an acid-base group over a redox-active metal center and in doing so allow the "pull" effect of the secondary coordination environment of the heme cofactor of hydroperoxidase enzymes to be modeled. Stopped-flow investigations have been performed to decipher the influence of a proton-donor group on O-O bond activation. Low-temperature reactions of tetramesitylporphyrin (TMP) and Hangman iron complexes containing acid (HPX-CO2H) and methyl ester (HPX-CO2Me) functional groups with peroxyacids generate high-valent Fe=O active sites. Reactions of peroxyacids with (TMP)FeIII(OH) and methyl ester Hangman (HPX-CO2Me)FeIII(OH) give both O-O heterolysis and homolysis products, Compound I (Cpd I) and Compound II (Cpd II), respectively. However, only the former is observed when the hanging group is the acid, (HPX-CO2H)FeIII(OH), because odd-electron homolytic O-O bond cleavage is inhibited. This proton-controlled, 2e- (heterolysis) vs 1e- (homolysis) redox specificity sheds light on the exceptional catalytic performance of the Hangman metalloporphyrin complexes and provides tangible benchmarks for using proton-coupled multielectron reactions to catalyze O-O bond-breaking and bond-making reactions.