Reactivity of benzil bis(4-methyl-3-thiosemicarbazone) with cadmium nitrate. Crystal structure of [Cd(LMe2H4)(NO3)2][Cd(LMe2H4)(NO3)(H2O)]NO3 · H2O

The reaction between cadmium nitrate dihydrate and benzil bis(4-methyl-3-thiosemicarbazone), LMe₂H₄, depends on the working conditions. In methanol the reaction gives the novel complex [Cd(LMe₂H₄)(NO₃)₂][Cd(LMe₂H₄)(NO₃)(H₂O)]NO₃ · H₂O (1). Its crystal structure shows the presence of two cadmium atoms with different coordination numbers, seven and eight, and the ligands acting as N₂S₂ neutral molecules. One cadmium has the coordination sphere completed by a bidentate nitrato group and a water molecule, whereas the other one is bonded to two bidentate nitrato groups. Both molecules are joined to one nitrate ion and to an additional water molecule by hydrogen bonds. In the presence of lithium hydroxide, the reaction leads to a binuclear complex with the ligand doubly deprotonated [Cd(LMe₂H₂)]₂ (2). The complexes were characterized by elemental analysis, mass spectrometry, ¹³C and ¹¹³Cd CP/MAS NMR and, in the case of complex 1, by X-ray diffraction.     

Crystal structures of [Ru(terpy)(HPB)(H2O)](PF6)2 and [Ru(terpy)(HPB)(2-picoline)](PF6) and the kinetics studies of the aqua ligand substitution by pyridine and substituted pyridines

The crystal structures of [Ru(terpy)(HPB)(H₂O)](PF₆)₂, 1, and [Ru(terpy)(HPB)(2-picoline)](PF₆), 2, (where terpy = 2,2′:6′,2′′-terpyridine and HPB = 2-(2′-hydroxyphenyl)-benzoxazole) have been determined. Both structures show slightly distorted octahedral coordination around the ruthenium center. In complex 1, the imine nitrogen of the HPB ligand occupies an axial position and is trans to the aqua ligand whereas in complex 2, the imine nitrogen is trans to the nitrogen of the 2-picoline ligand. The Ru-N(2-picoline) bond distance is much longer than the other Ru-N bonds in the complex due to steric effects from the methyl group of 2-picoline. In both complexes, the phenolate oxygen of the HPB ligand is in the equatorial position and trans to the center nitrogen of the terpyridine. The reaction of [Ru(terpy)(HPB)(H₂O)](PF₆)2 with pyridine and its analogs, 2-picoline and 4-picoline in dichloromethane was monitored spectrophotometrically. There is an initial reduction of the [Ru(III)-H₂O] complex to [Ru(II)-H₂O] complex prior to the substitution of the aqua ligand. The values of the activation parameters indicate that the substitution of the aqua ligand by pyridine, 2-picoline and 4-picoline follow an associative mechanism.     

Coordination of water to organolead(IV) nitrates: The examples of [PbPh2(NO3)2(H2O)2] and [PbMe3(NO3)(H2O)]

The compound [PbPh₂(NO₃)₂(H₂O)₂] was synthesized and characterized by spectroscopic methods (IR; ¹H, ¹³C and ²⁰⁷Pb NMR) and mass spectrometry. An X-ray diffraction study showed that the crystal is a supramolecular tridimensional network of hydrogen-bonded PbPh₂(NO₃)₂(H₂O)₂ units in which the Pb atom is octacoordinated and adopts a distorted hexagonal bipyramidal geometry, with four O (bidentate nitrate) and two O (water) atoms in equatorial positions and two C-phenyl atoms in axial positions. The crystal of [PbMe₃(NO₃)(H₂O)], obtained as a byproduct in the synthesis of PbMe₂(NO₃)₂, contains chains of hydrogen-bonded PbMe₃(NO₃)(H₂O) units in which the Pb atom is pentacoordinated with a slightly distorted trigonal bipyramidal environment. In this arrangement the three C-methyl atoms are equatorial and the O atoms from the monodentate nitrate and the water molecule are axial.     

Diorganotin(IV) complexes of dideprotonated pyridoxine (PN, vitamin B6). The crystal structures of [SnEt2(PN-2H)] · CH3OH, [SnEt2(PN-2H)(DMSO)] and [SnBu2(PN-2H)]

The reactions of dimethyl-, diethyl- and dibutyltin(IV) oxides with pyridoxine (PN) in toluene/ethanol led to the formation of compounds [SnR₂(PN-2H)] which were characterized by EI and FAB mass spectrometry and by IR, Raman, Mössbauer and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The structures of [SnEt₂(PN-2H)] · CH₃OH, [SnBu₂(PN-2H)] and [SnEt₂(PN-2H)(DMSO)] were determined by X-ray diffractometry. The first two contain dimeric [SnR₂(PN-2H)]₂ units in which two bridging-chelating pyridoxinate anions link the Sn atoms, while in [SnEt₂(PN-2H)(DMSO)] the DMSO coordinates to the tin atom via its O atom in a similar dimeric unit.     

Heterobimetallic [Ru(II)/Fe(II)] complexes: On the formation of trans- and cis-[RuCl2(dppf)(diimines)]

The synthesis and characterization of trans/cis-[RuCl₂(dppf)(diimines)], dppf = 1,1′-bis(diphenylphosphino)ferrocene; diimines = 2,2′-bipyridine (trans/cis-(1)), the new complexes with 4,4′-dimethyl-2,2′-bipyridine (trans/cis-(2)) and 1,10-phenanthroline (cis-(3)) are presented. The complexes were synthesized using two routes and the trans/cis-isomer formation is dependent upon conditions and the precursor applied. The trans-isomer (kinetic) readily isomerizes to the cis-isomer (thermodynamic) when exposed to light (fluorescent) and this process was followed by cyclic voltammetry and UV-vis. The electrochemical studies on these complexes reveal that Fe^(III)/Fe^(II) couples are insensitive to the isomer (trans/cis) formed, but the Ru^(III)/Ru^(II) couples are dependent on the isomer. Transfer-hydrogenation reactions for reduction of acetophenone were conducted using complexes cis-(1) and cis-(2) and the results are compared with that obtained for similar complexes. X-ray structure for cis-(3) are presented and discussed.     

The reactions of 2-benzoylpyridine with [RuHCl(CO)(PPh3)3] and [(C6H6)RuCl2]2

The reactions of [RuHCl(CO)(PPh₃)₃] and [(C₆H₆)RuCl₂]₂ with 2-benzoylpyridine have been examined, and two novel ruthenium(II) complexes – [RuCl(CO)(PPh₃)₂(C₅H₄NCOO)] and [RuCl₂(C₁₂H₉NO)₂] – have been obtained. The compounds have been studied by IR and UV–Vis spectroscopy, and X-ray crystallography. The molecular orbital diagrams of the complexes have been calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compounds have been calculated with the time-dependent DFT method, and the UV–Vis spectra of the compounds have been discussed on this basis.     

Transition metal complexes with thiosemicarbazide-based ligands. Part LIV. Nickel(II) complexes with pyridoxal semi- (PLSC) and thiosemicarbazone (PLTSC). Crystal and molecular structure of [Ni(PLSC)(H2O)3](NO3)2 and [Ni(PLTSC-H)py]NO3

This paper describes the synthesis of the first Ni(II) complexes with pyridoxal semicarbazone (PLSC), viz. Ni(PLSC)Cl₂ · 3.5H₂O (1), [Ni(PLSC)(H₂O)₃](NO₃)₂ (2), Ni(PLSC)(NCS)₂ · 4H₂O (3), [Ni(PLSC-2H)NH₃] · 1.5H₂O (4), as well as two new complexes with pyridoxal thiosemicarbazone (PLTSC), [Ni(PLTSC-H)py]NO₃ (5) and [Ni(PLTSC-H)NCS] (6). Complexes 1–3 are paramagnetic and have most probably an octahedral structure, for complex 2 this was proved by X-ray diffraction analysis. In contrast, complexes 4–6 are diamagnetic and have a square-planar structure, and in the case of complex 5 this was also confirmed by X-ray structural analysis. In all cases the Schiff bases are coordinated as tridentate ligands with an ONX (X = O, PLSC; X = S, PLTSC) set of donor atoms. With the complexes involving the neutral form of PLSC and the monoanionic form of PLTSC, the PL moiety is in the form of a zwitterion. In addition to the above-mentioned techniques, all the complexes were characterized by measuring their molar conductivities, UV–Vis and partial IR spectra.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Synthesis, characterisation and reactivity of trans-[Ru(L)(PPh3)Br2]; L=2-pyridyl-N-(2′-methylthiophenyl)methyleneimine: Crystal structure of trans-[Ru(L)(PPh3)Br2]

Reaction of Ru(PPh₃)₂Br₂ with the NNS chelating tridentate ligand 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (L) led to the isolation of the ruthenium(II) complex [Ru(L)(PPh₃)Br₂]. Reactivity of this complex with different bidentate chelating ligands revealed that the products are quite different from those obtained by reacting Ru(L)(PPh₃)Cl₂ (the corresponding cis dichloro complex) with the same ligands under comparable conditions. The mixed chelates were isolated and characterised by elemental analysis, magnetic moment measurement and by different spectroscopic methods along with their precursor. Electrochemistry of the complexes was examined by cyclic voltammetry using a platinum working electrode and a Ag/AgCl electrode as reference. The crystal structure of [Ru(L)(PPh₃)Br₂] disclosed that, unlike Ru(L)(PPh₃)Cl₂, the two bromo ligands are in trans position and this explained the difference in its reactivity pattern from the corresponding chloro complex.     

Structural diversification of the coordination mode of divalent metals with 1,3-propanediaminetetraacetate (1,3-pdta): The missing crystal structure of the s-block metal complex [Sr2(1,3-pdta)(H2O)6]·H2O

This paper reports the synthesis and X-ray characteristics of the missing homonuclear s-block metal complex {[Sr₂(1,3-pdta)(H₂O)₆]·H₂O}_n. In the title compound, the hexadentate 1,3-propanediaminetetraacetate (1,3-pdta) ligand joins to two Sr(II) centers via the diamine chain. Moreover, each Sr(II) is bridged through two carboxylate O atoms and a water molecule to two neighboring Sr(II) ions. The coordination sphere around each Sr(II) ion consists of one diamine nitrogen, four carboxylate oxygens and four water molecules. Comparison with the previously reported M(II)-1,3-pdta complexes reveals that increasing of the ion size results in the incorporation of water molecules into its first coordination sphere and consequent increase of the coordination number (C.N.) from six to seven or eight, while keeping the hexadentate coordination mode of the ligand. Further increase of the metal ion size leads to the loss of the chelating properties of the diamine and formation of a bis-tridentate complex. Associated with it is the change in the binding mode of the carboxylate groups. This forms the basis for classification of divalent metal 1,3-pdta complexes into five distinct structural classes. Additionally, in the present study X-ray powder diffraction and IR spectroscopy were used to distinguish the different structural types of M(II)-1,3-pdta complexes, including Ba[Ba(1,3-pdta)]·2H₂O which has been used for their preparation.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Intra- and intermolecular hydrogen bonds in [Ag(PPh3)3(HL)] complexes [H2L: H2xspa = 3(aryl)-2-sulfanylpropenoic acids; H2cpa = 2-cyclopentylidene-2-sulfanylacetic acid]

Compounds of the type [Ag(PPh₃)₃(HL)] {H₂xspa=3(aryl)-2-sulfanylpropenoic acids: x = Clp [3-(2-chlorophenyl)-], -o-mp [3-(2-methoxyphenyl)-], -p-mp [3-(4-methoxyphenyl)-], -o-hp [3-(2-hydroxyphenyl)-], -p-hp [3-(4-hydroxyphenyl-); H₂cpa = 2-cyclopentylidene-2-sulfanylacetic acid} were synthesized and characterised by IR and NMR (¹H ¹³C and ³¹P) spectroscopy and by FAB mass spectrometry. The crystal structures of [Ag(PPh₃)₃(HClpspa)], [Ag(PPh₃)₃(H-o-mpspa)], [Ag(PPh₃)₃(H-p-mpspa)] and [Ag(PPh₃)₃(Hcpa)] reveal the presence of discrete molecular units containing an intramolecular O-H···S hydrogen bond between the S atom and one of the O atoms of the COOH group. This intramolecular hydrogen bond remains in [Ag(PPh₃)₃(H-o-hpspa)]·EtOH and [Ag(PPh₃)₃(H-p-hpspa)] but in both cases polymeric structures are built on the basis of O-H···O interactions that involve the -OH substituent of the phenyl group of the sulfanylpropenoate fragment.     

Formation of [CoCl4(H2O)2] complex in CoCl2·MgCl2·8H2O double salt: structural and energetic properties of [MCl4(H2O)2] and [M(H2O)6] (M=Mg, Co)

The crystal structure of the double salt CoCl₂·MgCl₂·8H₂O has been determined by the X-ray diffraction method. It crystallizes in the space group with a=6.0976(9), b=6.308(1), c=8.579(3) Å, α=81.99(2)°, β=88.40°, γ=84.61(1)°, Z=1, and R=0.027. The crystal consists of two kinds of well separated octahedra, [CoCl₄(H₂O)₂]²⁻ and [Mg(H₂O)₆]²⁺. The former is unique as aquachloro complexes of Co²⁺. In order to elucidate the reason prepared as such unique complexes in the double salts, formation energies for [MCl₄(H₂O)₂]²⁻ and [M(H₂O)₆]²⁺ (M=Co, Mg) have been calculated by using the density functional methods, and it has been revealed that the formation energies of the first coordination sphere for the metal ions and the Cl⁻?H₂O hydrogen bond networks around [CoCl₄(H₂O)₂]²⁻ play a decisive role in forming [CoCl₄(H₂O)₂]²⁻ with the regular octahedral geometry in the double salt.     

New oxorhenium complexes with 2-(2′-hydroxyphenyl)-2-benzoxazolinato ligand. X-ray structure and DFT calculations for [ReOX2(hbo)(AsPh3)] and [ReOX2(hbo)(PPh3)] complexes

The reactions of [ReOX₃(AsPh₃)₂] and [ReOX₃(PPh₃)₂] with 2-(2′-hydroxyphenyl)-2-benzoxazoline (Hhbo) have been examined and [ReOX₂(hbo)(AsPh₃)] and [ReOX₂(hbo)(PPh₃)] (X = Cl, Br) complexes have been obtained. The crystal and molecular structures of [ReOCl₂(hbo)(AsPh₃)] (1) and [ReOBr₂(hbo)(PPh₃)] (4) have been determined. The electronic structures of 1 and 4 have been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 and 4 have been calculated with the time-dependent DFT method, and the UV–Vis spectra of these complexes have been discussed.     

Novel rhenium(III) complexes with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine: X-ray structures and DFT calculations for [ReCl3(OPPh3)(dppt)] and [ReCl3(PPh3)(dppt)] complexes

The reaction of [ReOCl₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReCl₃(OPPh₃)(dppt)] has been obtained. The triphenylphosphine oxide can be easily replaced by PPh₃ in the reaction of [ReCl₃(OPPh₃)(dppt)] with an excess of triphenylphosphine. The [ReCl₃(OPPh₃)(dppt)] and [ReCl₃(PPh₃)(dppt)] complexes have been structurally and spectroscopically characterized. Their molecular orbital diagrams have been calculated with the density functional theory (DFT) method, and their electronic spectra have been discussed on the basis of time-dependent DFT calculations. The compound [ReCl₃(OPPh₃)(dppt)] has been studied additionally by magnetic measurement. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Oxorhenium(V) complexes with quinoline-2-carboxylate ligand. X-ray structure of [ReOCl2(quin-2-c)(PPh3)] and [ReOBr2(quin-2-c)(AsPh3)] complexes: DFT and TD-DFT calculations for [ReOCl2(quin-2-c)(PPh3)]

Novel [ReOX₂(quin-2-c)(EPh₃)] complexes (X = Cl, Br; E = As, P; quin-2-c = quinoline-2-carboxylate ion) have been prepared by treatment of [ReOX₃(EPh₃)₂] with quinoline-2-carboxylic acid in acetone at room temperature. All the complexes were characterised by IR, UV–Vis spectroscopy and elemental analysis. The crystal and molecular structures have been determined for [ReOCl₂(qiun-2c)(PPh₃)] (1) and [ReOBr₂(qiun-2c)(AsPh₃)] (4). The electronic structure of 1 has been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 have been calculated with the time-dependent DFT method.     

XRD structure of two heptacoordinated Mn(II) complexes containing 2,9-dimethyl-1,10-phenanthroline (phen), nitrato and nicotinato bidentate anions: [Mn(phen)(nicot)(NO3)(H2O)]·EtOH·H2O and [Mn(phen)(NO3)2(H2O)]

The XRD structure of two seven-coordinated Mn(II) complexes with the formula [Mn(phen)(nicot)(NO₃)(H₂O)]·EtOH·H₂O (1) and [Mn(phen)(NO₃)₂(H₂O)] (2) are reported. The 2,9-dimethyl-1,10-phenanthroline, nitrato and nicotinato anions act as bidentate ligands, with Mn–N distances of 2.21–2.29 Å and Mn–O distances of 2.17–2.40 Å. In both compounds, the water molecule seems to be the strongest coordinated ligand, with bond distances of 2.139(2) Å in 1 and 2.195(2) Å in 2. The average ratio between coordinated unidentate and bidentate bond lengths less than the unity justifies, from an energetical point of view, the shape of the coordination polyhedra. In the structure of 1, the coordination polyhedron may be best-described as a distorted pentagonal bipyramid with a nitrogen from phenanthroline and the water molecule occupying the apical sites. The polyhedron shape for 2 is close to a square-capped trigonal prism, the capping site being occupied by the water molecule. The crystal structures are built by H-bonded bidimensional sheets piled up by π–π stacking of the partially interpenetrated aromatic moieties of adjacent layers.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

Facile synthesis of [(NHC)(NHCewg)RuCl2(CHPh)] complexes

The utility of [(NHC)(PPh₃)RuCl₂(CHPh)] for the facile and efficient synthesis of ten complexes of the type [(NHC)(NHC_ewg)RuCl₂(CHR)] with saturated and unsaturated NHC ligands in 85-94% isolated yield via a simple one step synthesis utilizing [AgI(NHC_ewg)] as NHC_ewg transfer reagents was demonstrated.