Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Direct functionalization of the cyclometalated 2-(2′-pyridyl)phenyl ligand bound to iridium(III)

Treatment of [Ir(ppy)₂(μ-Cl)]₂ and [Ir(ppy)₂(dtbpy)][OTf] (ppy = 2-(2′-pyridyl)phenyl; dtbpy = 4,4′-di-tert-butyl-2,2′-bipyridine; OTf = triflate) with pyridinium tribromide in the presence of Fe powder led to isolation of [Ir(4-Br-ppy)(μ-Br)]₂ (1) and [Ir(4-Br-ppy)₂(dtbpy)][OTf] (2), respectively. Pd-catalyzed cross-coupling of 2 with RB(OH)₂ afforded [Ir(4-R-ppy)₂(dtbpy)][OTf] (R = 4′-FC₆H₄ (3)), 4′-PhC₆H₄ (4), 2′-thienyl (5), 4′-C₆H₄CH₂OH (6). Treatment of 4 with B₂(pin)₂ (pin = pinacolate) afforded [Ir{4-(pin)B-ppy}₂(dtbpy)][OTf] (7). The alkynyl complexes [Ir(4-PhCC-ppy)₂(dtbpy)][OTf] (8) and [Ir{4-Me₂(OH)CC-ppy}(4-Br-ppy)(dtbpy)][OTf] (9) were prepared by cross-coupling of 2 with PhCCSnMe₃ and Me₂C(OH)CCH, respectively. Ethynylation of [Ir(fppy)₂(dtbpy)][OTf] (fppy = 5-formyl-2-(2′-pyridyl)phenyl) with Ohira’s reagent MeCOC(N₂)P(O)(OEt)₂ afforded [Ir{5-HCC-ppy}₂(dtbpy)][OTf] (10). The solid-state structures of 2, 5, 7, and 10 have been determined.     

Weak ferromagnetism in 1D coordination polymers: Syntheses,crystal structures,spectroscopic and magnetic properties of [Cu(L)(Memal)]n (Memal = the dianion of methylmalonic acid,L = 1,10-phenanthroline, 2,2′-bipyridine)

Investigation of the CuCl₂/H₂Memal/L (H₂Memal = methylmalonic acid, L = 1,10-phenanthroline or 2,2′-bipyridine) reaction system in MeOH and various molar ratios has lead to the isolation of two one-dimensional coordination polymers presenting the [Cu(L)(Memal)] repeating unit (1, L = 1,10-phen; 2, L = 2,2′-bpy). The Memal²⁻ ligand adopts the bidentate [chelating] + unidentate coordination mode between the Cu^II ions. Magnetic susceptibility measurements on 1 and 2 indicated the existence of weak ferromagnetic intrachain interactions and X-band EPR spectra from powdered samples of 1 and 2 are consistent with the stereochemistry of the Cu^II ions and with the presence of weak exchange interactions.     

Reactivity studies of cyclopentadienyl ruthenium(II), osmium(II) and pentamethylcyclopentadienyl iridium(III) complexes towards 2-(2′-pyridyl)imidazole derivatives

The reaction of [CpRu(PPh₃)₂Cl] and [CpOs(PPh₃)₂Br] with chelating 2-(2′-pyridyl)imidazole (N ∩ N) ligands and NH₄PF₆ yields cationic complexes of the type [CpM(N ∩ N)(PPh₃)]⁺ (1: M = Ru, N ∩ N = 2-(2′-pyridyl)imidazole; 2: M = Ru, N ∩ N = 2-(2′-pyridyl)benzimidazole; 3: M = Ru, N ∩ N = 2-(2′-pyridyl)-4,5-dimethylimidazole; 4: M = Ru, N ∩ N = 2-(2′-pyridyl)-4,5-diphenylimidazole; 5: M = Os, N ∩ N = 2-(2′-pyridyl)imidazole; 6: M = Os, N ∩ N = 2-(2′-pyridyl)benzimidazole). They have been isolated and characterized as their hexafluorophosphate salts. Similarly, in the presence of NH₄PF₆, [Cp∗Ir(μ-Cl)Cl]₂ reacts in dry methanol with N ∩ N chelating ligands to afford in excellent yield [Cp∗Ir(N ∩ N)Cl]PF₆ (7: N ∩ N = 2-(2′-pyridyl)imidazole; 8: N ∩ N = 2-(2′-pyridyl)benzimidazole). All the compounds have been characterized by infrared and NMR spectroscopy and the molecular structure of [1]PF₆, [2]PF₆ and [7]PF₆ by single-crystal X-ray structure analysis.     

Pd(0) and Pd(II) derivatives with heteroannularly bridged chiral ferrocenyl diphosphine ligands - A stereochemical analysis

The ligands (S_c, S_p)-1-diphenylphosphino-2,1′-(1-dicyclohexylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^CyPF, and (S_c, S_p)-1-diphenylphosphino-2,1′-(1-diphenylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^PhPF, have been used in the synthesis of the new Pd(0) and Pd(II) derivatives [Pd(PP^CyPF)(DMFU)] (1) (DMFU = dimethylfumarate), [Pd(PP^CyPF)(MA)] (2) (MA = maleic anhydride), [Pd(η³-2-Me-C₃H₄)(PP)]OTf (PP = PP^CyPF, 3; PP^PhPF, 4) (OTf = triflate), [PdRR′(PP)] (R = Me, R′ = Cl, PP = PP^CyPF, 5, PP^PhPF, 6; R = R′ = Me, PP = PP^CyPF, 7, PP^PhPF, 8; R = R′ = C₆F₅, PP = PP^CyPF, 9, PP^PhPF, 10). The molecular structure of 7 has been determined by X-ray diffraction. In the cases of complexes 1-4 two isomers are formed depending on the orientation of the ancillary ligand with respect to the ferrocenyl core. The stereochemistry of these complexes has been determined. In complex 6 the two possible isomers are obtained whereas in complex 5 the derivative with the Me group trans to PPh₂ is selectively formed. Restricted rotation of the pentafluorophenyl groups with respect to the Pd-C bond has been found in 9 and 10. In all derivatives the conformation of the ferrocenyl ligand is the same as that seen by X-ray diffraction and deduced from NMR data.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Synthesis,characterization and superoxide dismutase activity of some octahedral nickel(II) complexes

Four new mixed ligand nickel(II) complexes viz., [Ni(tren)(phen)](ClO₄)₂ (1), [Ni(tren)(bipy)](ClO₄)₂ (2), [Ni(SAA)(PMDT)] · 2H₂O (3) and [Ni(SAA)(TPTZ)] (4) (tren = tris(2-aminoethylamine), phen = 1,10-phenanthroline, bipy = 2,2′-bipyridine, SAA = salicylidene anthranilic acid, PMDT = N,N,N′,N″,N″-pentamethyldiethylenetriamine, TPTZ = 2,4,6-tri(2-pyridyl)-1,3,5-triazine) have been synthesized and characterized by means of elemental analysis, spectroscopic, magnetic susceptibility and cyclic voltammetric measurements. Single crystal X-ray analysis of [Ni(tren)(phen)](ClO₄)₂ (1) and [Ni(SAA)(PMDT)] · 2H₂O (3) has revealed the presence of a distorted octahedral geometry. Superoxide dismutase activity of these complexes has also been measured.     

Preparation,crystal structures and spectroscopic characterization of oxalate copper(II) complexes containing the nitrogen ligands 4,4′-dimethyl-2,2′-bipyridine and di(2-pyridyl)sulfide

The preparation, crystal structures and spectroscopic characterization of four oxalate copper(II) complexes containing the 4,4′-dimethyl-2,2′-bipyridine (Mebpy) or di(2-pyridyl)sulfide (DPS) nitrogen ligands namely [μ-(ox){Cu(Mebpy)(NO₃)(H₂O)}₂] (1), [μ-(ox){Cu(Mebpy)(ClO₄)(H₂O)}₂] (2), [μ-(ox){Cu(DPS)(H₂O)}₂](ClO₄)₂ (3) and [Cu(DPS)(ox)(H₂O)] · 2H₂O (4) are described. X-ray diffraction measurements have shown that complexes 1–3 are binuclear, in which the oxalate anion bridges two Cu(II) centers, while the complex (4) is mononuclear and the oxalate anion adopts the terminal bidentate chelating coordination mode. In 1 and 2 the Cu(II) sites display a distorted octahedral geometry (4+2 environment) and in compounds 3 and 4 the Cu(II) centers exhibit a slightly distorted square pyramidal geometry. In addition, complexes 1 and 2 present a 2D supramolecular arrangement through hydrogen bonds between coordination water molecules and nitrate or perchlorate anions and π-stacking interaction between the pyridyl rings of Mebpy nitrogen ligands.     

Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Syntheses,topological networks and properties of four complexes based on 4-amino-3,5-bis(3-pyridyl)-1,2,4-triazole ligand

Reactions of metal acetates with 4-amino-3,5-bis(3-pyridyl)-1,2,4-triazole (3-abpt) and co-ligands gave rise to four new complexes, namely [Zn₂(3-abpt)(beta)(DMF) (H₂O)₂]_n·nH₂O (1), [Zn(3-abpt)(ip)]_n·3nH₂O (2), [Zn(3-abpt)(ip)(H₂O)₂]_n·2nH₂O (3), and [Cu₂(3-abpt)₂(C₆H₅COO)₄(H₂O)₂]_n·2nH₂O (4) (ip = isophthalate, beta = 1,2,4,5-benzenetetracarboxylate). Compound 1 is a 3D coordination polymer with uncommon 3,4-connected (6².8)₂(6².8².10²) network. Compounds 2–4 are all 1D coordination polymers, which exhibit diversity structures. Compound 2 is a tubular-like chain, 3 is a ring-like network, and 4 is a zigzag chain. Their thermal stabilities and the photoluminescence of 1 have also been investigated.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Syntheses and characterizations of nine coordination polymers of transition metals with carboxylate anions and bis(imidazole) ligands

Nine new compounds, namely [CuL1(biim-6)] · H₂O (1), [ZnL1(biim-6)] · H₂O (2), [MnL1(biim-6)] · H₂O (3), [MnL1(biim-4)] (4), [Co₂(L2)₂(biim-5)₃ · 6H₂O] · 8H₂O (5), [ZnL3(biim-6)] (6), [ZnL3(biim-5)] (7), [CdL3(biim-5) · 1.5H₂O] · 0.5H₂O (8) and [CdL4(biim-6) · 2H₂O] (9) [where L1 = oxalate anion, L2 = fumarate anion, L3 = phthalate anion, L4 = p-phthalate anion, biim-4 = 1,1′-(1,4-butanediyl)bis(imidazole), biim-5 = 1,1′-(1,5-pentanedidyl)bis(imidazole) and biim-6 = 1,1′-(1,6-hexanedidyl)bis(imidazole)] were successfully synthesized. Compounds 1–3 are isostructural, and display 2D polymeric structures. Compound 4 shows a threefold interpenetrating diamondoid framework. In compound 5, the anions act as counterions, and the metal cations are bridged by bis(imidazole) ligands to form 1D polymeric chains. Compounds 6–9 show 2D polymeric structures. The magnetic properties for 1, 3 and 4 and luminescent properties for 2 and 6–9 are discussed. Thermogravimetric analyses (TGA) for these compounds are also discussed.     

Transition metal complexes with thiosemicarbazide-based ligands. Part LIV. Nickel(II) complexes with pyridoxal semi- (PLSC) and thiosemicarbazone (PLTSC). Crystal and molecular structure of [Ni(PLSC)(H2O)3](NO3)2 and [Ni(PLTSC-H)py]NO3

This paper describes the synthesis of the first Ni(II) complexes with pyridoxal semicarbazone (PLSC), viz. Ni(PLSC)Cl₂ · 3.5H₂O (1), [Ni(PLSC)(H₂O)₃](NO₃)₂ (2), Ni(PLSC)(NCS)₂ · 4H₂O (3), [Ni(PLSC-2H)NH₃] · 1.5H₂O (4), as well as two new complexes with pyridoxal thiosemicarbazone (PLTSC), [Ni(PLTSC-H)py]NO₃ (5) and [Ni(PLTSC-H)NCS] (6). Complexes 1–3 are paramagnetic and have most probably an octahedral structure, for complex 2 this was proved by X-ray diffraction analysis. In contrast, complexes 4–6 are diamagnetic and have a square-planar structure, and in the case of complex 5 this was also confirmed by X-ray structural analysis. In all cases the Schiff bases are coordinated as tridentate ligands with an ONX (X = O, PLSC; X = S, PLTSC) set of donor atoms. With the complexes involving the neutral form of PLSC and the monoanionic form of PLTSC, the PL moiety is in the form of a zwitterion. In addition to the above-mentioned techniques, all the complexes were characterized by measuring their molar conductivities, UV–Vis and partial IR spectra.     

A series of silver coordination polymers constructed from flexible bis(benzimidazole) ligands and different carboxylates

In this article, eight new silver coordination polymers constructed from two structurally related ligands, 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole) (bbmb) and 1,1′-(1,4-butanediyl)bis(2-ethylbenzimedazole) (bbeb), have been synthesized: [Ag(L1)(bbmb)]·C₂H₅OH·H₂O (1), [Ag(L2)(bbmb)]·C₂H₅OH (2), [Ag(L3)(bbmb)] (3), [Ag₂(L4)(bbmb)₂]·C₂H₅OH (4), [Ag(L2)(bbeb)]·C₂H₅OH (5), [Ag(L5)(bbeb)]·CH₃OH (6), [Ag₂(L6)₂(bbeb)]·H₂O (7), and [Ag₂(L7)(bbeb)₂]·4(H₂O) (8), where L1 = benzoate anion, L2 = p-methoxybenzoate anion, L3 = 2-amino-benzoate anion, L4 = oxalate anion, L5 = cinnamate ainon, L6 = 3-amino-benzoate anion, and L7 = fumaric anion. In 1-3, 5 and 6, the bidentate N-donor ligands (bbmb and bbeb) in trans conformations bridge neighboring silver centers to form 1D single chain structures. The carboxylate anions are attached on both sides of the chains. Moreover, 1 and 3 are extended into 2D layers, while 2 and 6 are extended into 3D frameworks through π-π interactions. In 4, the bbmb ligands bridge adjacent Ag(I) centers to form -Ag-bbmb-Ag- chains, which are further connected by L4 anions to form a 2D layer. The resulting layers are extended into 3D frameworks through strong π-π interactions. In 7, the N-donor ligands (bbeb) in trans conformations bridge two silver centers to generate a [Ag₂(bbeb)]²⁺ unit. The adjacent [Ag₂(bbeb)]²⁺ units are further connected via the L6 anions to form a 1D ladder chain. Moreover, the structure of compound 7 is extended into a 3D framework through hydrogen bonding and π-π interactions. In 8, two Ag(I) cations are bridged by two bbeb ligands in cis conformations to form a [Ag₂(bbeb)₂]²⁺ ring, which are further linked by L7 anions to generate a 1D string chain. Furthermore, the hydrogen bonding and π-π interactions link L7 anions to form a 2D supramolecular sheet. Additionally, the luminescent properties of these compounds were also studied.