New mercury(II) and cadmium(II) complexes with (p-methylbenzoyl)methylene triphenylphosphorane: Synthesis,spectroscopic and structural characterization

Reaction of Ph₃PCHCOC₆H₄Me (L), with HgX₂ and CdCl₂·H₂O in methanol with equimolar ratios give binuclear complexes of the type [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ (M = Hg; X = Cl (1), Br (2), I (3), M = Cd; Cl(4)). The bridge-splitting reaction of binuclear complexes [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ by dimethyl sulfoxide (DMSO) yields the mononuclear complexes [MX₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (M = Hg; X = Cl (5), Br (6), I (7), M = Cd; Cl (8)). The characterization of these complexes was carried out by elemental analysis and FT-IR, ¹H, ³¹P, and ¹³C NMR spectroscopies. C-coordination of ylide and O-coordination of DMSO are demonstrated by single-crystal X-ray analysis of mononuclear complex of [HgBr₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (6). Complex 6 is monomeric with tetrahedral geometry around the metal ion.     

Functional luminescent lanthanide complexes: Modulation of visible luminescence from europium complexes

The syntheses of three new ligands (L^1-3), which are based upon a DO3A core and appended with additional receptor sites for metal cations, are described, together with their corresponding Eu(III) complexes (Eu-L^1-3). The complexes are visibly luminescent in aqueous solution, following sensitization via the pyridine chromophore, showing characteristic narrow line-like emission from Eu(III). The luminescence properties show that water is effectively excluded from the inner coordination sphere of europium (q = 0). Each of the complexes showed perturbed luminescence properties upon addition of a variety of d-block metal ions. For example, emission quenching was observed for each complex following addition of Cr(III) and Cu(II). Selectivity towards Hg(II) (over Cd(II), Cu(II) and Zn(II)) was demonstrated with Eu-L³, which possesses a receptor site incorporating a softer thiophene moiety. More specifically, Hg(II) binding resulted in changes in the form of the steady state emission spectrum, together with a corresponding reduction of the luminescence lifetime in water, which can be attributed to an increase in inner sphere hydration (q = 2) and thus enhanced non-radiative deactivation of the ⁵D₀ state by proximate O-H oscillators.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Enolic Schiff-base aluminum complexes and their application in lactide polymerization

A series of NNOO-tetradentate enolic Schiff-base ligands were prepared where ligand L₁ = bis(benzoylacetone)propane-1,2-diimine, L₂ = bis(acetylacetone)-propane-1,2-diimine, L₃ = bis-(acetylacetone)cyclohexane-1,2-diimine. Their further reaction with aluminum tris(ethyl) formed complexes LAlEt (1a, 2a and 3a). The solid structure of complexes 1a, 2a and 3a confirmed by X-ray single crystal analysis manifested that these complexes were all monomeric and five-coordinated with an aluminum atom in the center. The configurations of these complexes varied from trigonal bipyramidal geometry (tbp) to square pyramidal geometry (sqp) due to their different auxiliary ligand architectures. ¹H NMR spectra indicated that all these complexes retained their configuration in solution states. Their catalytic properties to polymerize racemic-lactide (rac-LA) in the presence of 2-propanol were also studied. The diimine bridging parts as well as the diketone segment substituents had very close relationship with their performance upon the polymerization process. All these complexes gave moderately isotactic polylactides with controlled molecular weight and very narrow molecular weight distributions.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).     

Synthesis, characterization and luminescence study of dialkyl[1-arylmethyleneimino-2-naphthonato]gallium complexes: Crystal structure of dimethyl[1-(2-pridyl) methyleneimino-2-naphthonato]gallium

Eight dialkylgallium complexes of type R₂GaL [(M = Me, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (1), M = Et, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (2), M = Me, L = 1-phenylmethyleneimino-2-naphthonato (3), M = Et, L = 1-phenylmethyleneimino-2-naphthonato (4), M = Me, L = 1-(p-methoxylphenyl)methyleneimino-2-naphthonato (5), M = Me, L = 1-(3,4-dimethoxylphenyl)methyleneimino-2-naphthonato (6), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (7), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (8)) have been synthesized by reaction of trialkylgallium with appropriate 1-arylmethyleneimino-2-naphthols. The complexes have been characterized by elemental analysis, ¹H NMR, IR and mass spectrometry. Structure of dimethyl[1-(2-pyridyl)methyleneimino-2-naphthonato]gallium (1) has been determined by X-ray single crystal analysis. Ga atom is five coordinate in the structure. Photoluminescent properties have been measured. The maximum emission wavelengths are in the range of 358 and 412 nm with the intensity of 13-325 a.u. The electroluminescent properties of 3, 5, 7 and 8 have been measured. The maximum emission wavelengths are in the range of 450 and 480 nm.     

Syntheses, structures, and properties of metal complexes involving π-conjugated tetrathiafulvalene-pyridine ligand

Four metal complexes based on the phenyl-bridged pyridine ligand with tetrathiafulvalene unit (TTF-Ph-Py, L), Ni^II(acac)₂(L)₂ (1, acac = acetylacetonate), M(hfac)₂(L)₂ (M = Ni^II, 2; M = Cu^II, 3; hfac = hexafluoroacetylacetonato) and [Co^II(Tp^Ph2)(OAc)(L)]·H₂O (4, Tp^Ph2 = hydridotri(3,5-diphenylpyrazol-1-yl) borate), have been synthesized and structurally characterized. The absorption spectra and redox behaviors of these new compounds have been studied. Optimized conformation and molecular orbital diagram of L has been calculated with density functional theory (DFT).     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Stepwise formation of metallo-prisms of iridium and rhodium complexes bearing pentamethylcyclopentadienyl ligands

Reactions of [M(Cp^∗)Cl(μ-Cl)]₂ (M = Ir(1a); M = Rh(1b)) with tridentate ligands tpt (tpt = 2,4,6-tripyridyl-1,3,5-triazine) gave the corresponding trinuclear complexes [M₃(Cp^∗)₃(μ₃-4-tpt-κN)Cl₆] (M = Ir(2a); M = Rh(2b)), which can be converted into hexanuclear complexes [M₆(Cp^∗)₆(μ₃-4-tpt-κN)₂(μ-Cl)₆](O₃SCF₃)₆ (M = Ir(3a); M = Rh(3b)) by treatment with AgO₃SCF₃, respectively. X-ray of 3b revealed that each of six pentamethylcyclopentadienyl metal moieties was connected by two μ-Cl-bridged atoms and a tridentate ligand to construct a cation triangular metallo-prism cavity with the volume of about 273 Å³ based on the distance of the two triazine moieties is 3.62 Å.     

Syntheses, characterizations and crystal structures of new organoantimony(V) complexes with heterocyclic (S, N) ligand

Eight new organoantimony(V) complexes with 1-phenyl-1H-tetrazole-5-thiol [L¹H] and 2,5-dimercapto-4-phenyl-1,3,4-thiodiazole [L²H] of the type R_nSbL_5 − n (L = L¹: n = 4, R = n-Bu 1, Ph 2, n = 3, R = Me 3, Ph 4; L = L²: n = 4, R = n-Bu 5, Ph 6, n = 3, R = Me 7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental, FT-IR, ¹H and ¹³C NMR analyses. Among them complexes 2, 6 and 8 have also been confirmed by X-ray crystallography. The structure analyses show that the antimony atoms in complexes 2 and 6 display a trigonal bipyramid geometry, while it displays a distorted capped trigonal prism in complex 8 with two intramolecular Sb?N weak interactions. Furthermore, the supramolecular structure of 2 has been found to consist of one-dimensional linear molecular chain built up by intermolecular C-H?N weak hydrogen bonds, while a macrocyclic dimer has been found in complex 6 linked by intermolecular C-H?S weak hydrogen bonds with head-to-tail arrangement. Interestingly, one-dimensional helical chain is recognized in complex 8, which is connected by intermolecular C-H?S weak hydrogen bonds.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

The effect of titanium alkoxides in the synthesis of heterobimetallic complexes by titanocene(III) alkoxide-induced metal-metal bond cleavage of metal carbonyl dimers

A series of titanocene(III) alkoxides L₂Ti(III)OR where L = Cp, R = Et(1b), ^tBu(1a), 2,6-Me₂C₆H₃(1c), 2,6-^tBu₂-4-Me-C₆H₂(1d), or L = Cp*, R = Me(2e), ^tBu(2a), Ph(2f) was synthesized and subjected to reaction with [CpM(CO)₃]₂ [M = Mo, W], [CpRu(CO)₂]₂, and Co₂(CO)₈. The Ti(III) precursors 1a, 1c, 2a, 2e, and 2f reacted with [CpM(CO)₃]₂ [M = Mo, W] to form heterobimetallic complexes L₂Ti(OR)(μ-OC)(CO)₂MCp [M = Mo, W], of which Ti and M are linked by an isocarbonyl bridge. Reactions of these Ti(III) complexes with Co₂(CO)₈ resulted in formation of Ti-Co₁ heterobimetallic complexes, from 2a, 2e, or 2f, or Ti-Co₃ tetrametallic complexes, Cp₂Ti(O^tBu)(μ-OC)Co₃(CO)₉ from 1a, 1b, or 1c. The products were characterized by NMR, IR, and X-ray crystallography. Reaction mechanisms were proposed from these results, in particular, from steric/electronic effects of titanium alkoxides.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Structural variations in self-assembled cadmium benzoate complexes

A series of mixed ligand cadmium(II) complexes having 3,5-dimethylpyrazole and aromatic carboxylate are structurally characterized. The effect of substituent on aromatic ring and also the effect of composition on co-ordination behavior of these complexes are ascertained. Hydrogen bonded self-assembled mononuclear complexes are obtained from composition [Cd(L)₂(L_a)₂] where L_a = 3,5-dimethylpyrazole L = R–C₆H₄COO– [R = H (1), 2-Cl (2), 4-OH (3), 2-OH (4)]. The cadmium complex (5) having composition [Cd(L)₂(L_a)(H₂O)] (L = 2-NO₂–C₆H₄COO–) is tetra-nuclear. The complex has eight and six co-ordination around cadmium and self-assembles through hydrogen bonding leading to form extended chain structure. The four complexes (1–4) have six co-ordinated trigonal prismatic geometry around cadmium ions. Cadmium complexes having composition [Cd(L)₂(L_a)] such as R = 4-NO₂ (6), 4-Cl (7), and 1-naphthoate complex (8) are co-ordination polymers with seven co-ordination geometry around cadmium. In these co-ordination polymers different Cd–Cd distances are observed for alternate pair of cadmium ions. For example in the case of the co-ordination polymer of 4-nitro-benzoate complex the Cd–Cd distance between alternate pairs are 4.138 Å, and 3.748 Å. The 1-naphthoate complex having pyridine has composition [Cd(L)₂(L_b)₂](H₂O)] (9) where L_b = pyridine and L = 1-naphthoate has seven co-ordination with a distorted pentagonal bipyramid geometry.     

Schiff bases of 1′-hydroxy-2′-acetonaphthone containing chalcogen functionalities and their complexes with and (p-cymene)Ru(II), Pd(II), Pt(II) and Hg(II): Synthesis, structures and applications in C-C coupling reactions

Schiff bases of 1′-hydroxy-2′-acetonaphthone (HAN) containing chalcogen functionalities, 1-HO-C₁₀H₆-2-CH₃)CN-(CH₂)_nEC₆H₄-4-R (R = H or OMe; n = 2 or 3; E = S (L¹-L²), Se (L³-L⁴) or Te (L⁵-L⁶)) have been synthesized in yield 90-95%. They show characteristic ¹H, ¹³C{¹H} ⁷⁷Se{¹H} and ¹²⁵Te{¹H} (in case of selenated and tellurated species, respectively) NMR spectra. Their complexation with Pd(II), Pt(II), Hg(II) and (p-cymene)Ru(II) has been explored. The single-crystal structures of ligands L¹, L³ and L⁶ and complexes of Pd(II) with L¹, L², L³ and L⁵ have been determined. The geometry of Pd is close to square planar in all the complexes and the ligands coordinate in a uni-negative tridentate mode. The Pd-N bond lengths are in the range 1.996(7)-2.019(5) ?. The Pd-Se bond distance is 2.3600(5) ? whereas Pd-Te is 2.5025(7) ?. The Pd(II) complexes of L¹-L⁵ have been found promising as homogeneous catalyst for Heck and Suzuki reactions. The yields obtained were up to 85%.