Microcalorimetric determination of displacement adsorption enthalpies of protein refolding on a moderately hydrophobic surface at 308 K

Both microcalorimetric determination of displacement adsorption enthalpies ΔH and measurement of adsorbed amounts of guanidine – denatured lysozyme (Lys) refolding on the surface of hydrophobic interaction chromatography (HIC) packings at 308 K were carried out and compared with that at 298 K. Study shows that both temperature and concentration of guanidine hydrochloride (GuHCl) affect the molecular mechanism of hydrophobic interaction of protein with adsorbent based on the analysis of dividing ΔH values into three kinds of enthalpy fractions. The adsorption in higher concentrations of GuHCl (>1.3 mol L^–1) at 308 K is an enthalpy-driving process, and the adsorption under other GuHCl concentrations is an entropy-driving process. The fact that the Lys denatured by 1.8 mol L^–1 GuHCl forms a relatively stable intermediate state under the studied conditions will not be changed by temperature.     

四苯硼钠在活性炭表面吸附过程的疏水相互作用

In this paper, the adsorption characteristics of sodium tetraphenylborate(NaBPh4) on activated carbon at 298.2,303.2,308.2,313..2 and 323.2 K was studied.The results show that the adsorption isotherm of NaBPh4 on activated carbon at different temperatures could be described using Langrnuir equation. Furthermore, the standard Gibbs energy, enthalpy, entropy and hydrophobic interaction Gibbs energy for the adsorption of NaBPh4 on activated carbon were studied, and the result shows that the hydrophobic interaction of BPh4^- ion plays the most important role for the transfer of NaBPh4 from water to activated carbon surface.     

A thermodynamic study of protein-induced lipid lateral phase separation. Effect of lysozyme on mixed lipid vesicles

In this work we study by differential scanning calorimetry (DSC) the lateral phase separation induced by a globular protein (lysozyme) on vesicles built-up by charged (phosphatidic acid) and neutral (phosphatidylcholine) lipids.The adsorption of the positively charged protein onto the negative vesicle surface induces the formation of micro-domains richer in the charged lipid component. This phenomenon is revealed as a splitting of the excess heat capacity peak associated to the melting of the lipid hydrocarbon chains.Also, the peak associated to the protein denaturation is shifted, suggesting the presence of adsorbed proteins onto the vesicle surface. The surface electrostatic potentials, both of proteins and vesicles, have been modulated by pH and ionic strength variations, showing a deep influence of the electric charges in modifying protein adsorption, rate of denaturation (related to unfolding enthalpy variation), and lipid micro-domain formation.Some of the present results have been rationalized on the basis of a theoretical model recently developed by the authors.     

Competitive adsorption of fibrinogen and albumin onto polymer microspheres having hydrophilic/hydrophobic heterogeneous surface structures

The competitive adsorption of bovine fibrinogen (BFb) and bovine serum albumin onto polymer microspheres from the mixture solution was examined under various protein-to-microsphere ratios using various homopolymer microspheres and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres having heterogeneous surface structures consisting of both hydrophilic and hydrophobic parts. They were produced by emulsifier-free (seeded) emulsion polymerizations. The selective adsorption of BFb was not observed for the homopolymer microspheres, but observed for the composite polymer microspheres having optimum compositions.Part CXXXVIII on the series Studies on Suspension and Emulsion     

Experimental evidence of the reversibility of the first stage of protein adsorption at a hydrophobic quartz surface near the isoelectric point

The reversibility of the first stage of adsorption of zwitterionic cytochrome c on a hydrophobic quartz surface was investigated using time‐resolved slab optical waveguide (SOWG) absorption spectroscopy. Using a novel prism‐free broadband coupling approach, absorbance data were collected successfully at a 50 ms time interval during the first few seconds after solution–surface contact. Near the isoelectric point where the cytochrome c molecules possess a net charge of zero and hence cannot be influenced by an electric field, the speed at which adsorption proceeded was found to be dependent on cytochrome c concentration as well as on surface hydrophobicity. It was also observed that the degree of protein adsorption increased as the surface hydrophobicity was increased. Within 6 s the adsorption process appeared to be reversible, as revealed by extremely low chi‐squared values when the absorbance data were fitted into the reversible Langmuir‐type kinetic model. The standard Gibbs free energy of adsorption was also calculated from the absorbance data. Copyright © 2003 John Wiley & Sons, Ltd.     

Comparison of solvation-effect methods for the simulation of peptide interactions with a hydrophobic surface

In this study we investigated the interaction behavior between thirteen different small peptides and a hydrophobic surface using three progressively more complex methods of representing solvation effects: a united-atom implicit solvation method [CHARMM 19 force field (C19) with Analytical Continuum Electrostatics (ACE)], an all-atom implicit solvation method (C22 with GBMV), and an all-atom explicit solvation method (C22 with TIP3P). The adsorption behavior of each peptide was characterized by the calculation of the potential of mean force as a function of peptide-surface separation distance. The results from the C22/TIP3P model suggest that hydrophobic peptides exhibit relatively strong adsorption behavior, polar and positively-charged peptides exhibit negligible to relatively weak favorable interactions with the surface, and negatively-charged peptides strongly resist adsorption. Compared to the TIP3P model, the ACE and GBMV implicit solvent models predict much stronger attractions for the hydrophobic peptides as well as stronger repulsions for the negatively-charged peptides on the CH(3)-SAM surface. These comparisons provide a basis from which each of these implicit solvation methods may be reparameterized to provide closer agreement with explicitly represented solvation in simulations of peptide and protein adsorption to functionalized surfaces.     

Vibrational spectra and thermodynamic functions of allyl acetate

Raman spectrum of allyl acetate molecule has been photographed in liquid phase using 4358 ? line of mercury arc as the exciting line. Infrared absorption spectrum of the molecule has been recorded in liquid phase in the frequency range 200–4000 cm⁻¹. Both the spectra have been analysed to identify the fundamental frequencies. AssumingC _s symmetry, the observed fundamental frequencies have been assigned to various modes of vibration and compared with the frequencies of allyl halides and acetic acid. On the basis of present assignments of fundamental vibrational frequencies and assumed approximate structural parameters of the molecule, thermodynamic functions have been computed.     

Vapour adsorption and contact angles on hydrophobic solid surfaces

To test the effects of vapour adsorption on contact angle measurements, contact angles of high-vapour-pressure liquids and low-vapour-pressure liquids on a hydrophobic solid surface (FC721) were measured by using the axisymmetric drop shape analysis-profile (ADSA-P) technique. Details of the surface preparation and the experiments are presented. By plotting the experimental data in terms of _1v cos vs. _1v, this study shows that the vapour adsorption on a fluorocarbon surface, FC721, is negligible.     

Effect of salt concentrations on the displacement adsorption enthalpies of denatured protein folding at a moderately hydrophobic surface

Lead(II) complexes of reduced glutathione (GSH) of general composition [Pb(L)(X)]·H₂O (where L=GSH; X=Cl, NO₃, CH₃COO, NCS) have been synthesized and characterized by elemental analyses, infrared spectra and electronic spectra. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes. Infrared spectra indicate deprotonation and coordination of cysteinyl sulphur with metal ion. It indicates the presence of water molecule in the complexes that has been supported by TG/DTA. The thermal behaviour of complexes shows that water molecule is removed in first step-followed removal of anions and then decomposition of the ligand molecule in the subsequent steps. Thermal decomposition of all the complexes proceeds via first order kinetics. The thermodynamic activation parameters, such as E*, A, ΔH*, ΔS* and ΔG* have been calculated. The geometry of the metal complexes has been studied with the help of molecular modeling for energy minimization calculation.     

Low-temperature heat capacities and derived thermodynamic functions of cyclohexane

The low-temperature heat capacities of cyclohexane were measured in the temperature range from 78 to 350 K by means of an automatic adiabatic calorimeter equipped with a new sample container adapted to measure heat capacities of liquids. The sample container was described in detail. The performance of this calorimetric apparatus was evaluated by heat capacity measurements on water. The deviations of experimental heat capacities from the corresponding smoothed values lie within ±0.3%, while the inaccuracy is within ±0.4%, compared with the reference data in the whole experimental temperature range. Two kinds of phase transitions were found at 186.065 and 279.684 K corresponding solid-solid and solid-liquid phase transitions, respectively. The entropy and enthalpy of the phase transition, as well as the thermodynamic functions {H_(T)-H _{298.15 K}} and {S _(T)-S_{298.15 K}}, were derived from the heat capacity data. The mass fraction purity of cyclohexane sample used in the present calorimetric study was determined to be 99.9965% by fraction melting approach. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamics of vapour adsorption on heterogeneous microporous adsorbents

Fundamental thermodynamic functions have been derived for equations of adsorption isotherms including structural heterogeneity connected with micropore dimensions. Good agreement has been achieved between values of the differential molar enthalpy of adsorption and values of the isosteric adsorption heats obtained experimentally.     

Immobilization of prostaglandin synthetase by hydrophobic adsorption

In this article, the immobilization of prostaglandin synthetase onn-alkyl or aryl amino-agar beads by hydrophobic adsorption is reported. The effects of different hydrophobic groups in the agar beads, pH of buffer, concentration of salts on the adsorption of prostaglandin synthetase, and the properties of immobilized prostaglandin synthetase were also studied. The results showed that 20–35 mg of microsome containing PG synthetase (protein content 8–15 mg) could be adsorbed on each gram ofn-dodecylamino-agar beads after suction drying the gel in the buffer of pH 5.5 (containing 0.5 mol/L KC1), 0.1 mol/L citric-phosphate at 4‡C. The remaining immobilized enzyme activity was over 80%. The optimum pH of immobilized PG synthetase is 8.0, similar to that of the native enzymes. The thermostability of immobilized PG synthetase in the buffer containing 0.5 mol/L KC1 was increased. Immobilized PG synthetase was used as a catalyst of synthesis of prostaglandin E₁. The preservation of activity after 10 working cycles was 86.2%.     

Synthesis,characterization and thermodynamic data of compounds with NZP structure

Data on synthesis, thermal behavior and thermodynamic properties for the NZP phosphates NaMe₂(PO₄)₃ and Na₅Me(PO₄)₃ (Me=Ti, Zr, Hf) are reported. The compounds were synthesized by sol-gel method and solid-state reactions and characterized by X-ray powder diffraction, IR spectroscopy, electron microprobe and chemical analysis. Their thermal behavior was studied by the DTA measurements. The heat capacities of the phosphates were measured between temperatures 7 and 650 K. The fractal dimensions for the phosphates were calculated. The obtained thermodynamic characteristics of these phosphates and also literature data for the compounds of NZP type structure are summarized.     

Sequential adsorption of bacteriophage T4 lysozyme stability variants at solid–water interfaces

The sequential adsorption of the wild type T4 lysozyme and one of its structural stability variants was studied, using ellipsometry and ¹²⁵I radioisotope labeling techniques. The mutant lysozyme was produced by substitution of the isoleucine residue at position 3 in the wild type with a tryptophan residue, resulting in a protein with lower structural stability. The mutant protein was more resistant to surfactant-mediated elution, and apparently adsorbed at the interfaces with a greater interfacial area/molecule than the wild typeT4 lysozyme. However, the results of each type of experiment suggested that sequential adsorption and exchange of proteins occurred only in the case of the less stable mutant followed by the wild type. This suggests that, in these exchange reactions, properties of the adsorbing protein (e.g. its ability to adsorb when a relatively small amount of unoccupied area is present) were more important than the apparent binding strength of the adsorbed protein molecules.     

Chemical equilibrium model for the thermodynamic properties of mixed aqueous micellar systems: Application to thermodynamic functions of transfer

Mixed micelles can be formed in water between various pairs of hydrophobic solutes such as surfactants, alcohols and hydrocarbons. These systems can often be studied through the thermodynamic functions of transfer of one of the solutes, usually kept near infinite dilution, from water to an aqueous solution of the other solute. When mixed micelles are formed, these functions change significantly, and often go through extrema, in the region where the binary system micellizes or undergoes some microphase transition.Three main effects are responsible for the observed trends: pair-wise interactions between both solutes in the monomeric form, a distribution of the reference solute between the aqueous and micellar phases and a shift in the monomer-micelle equilibrium in the vicinity of the reference solute. Simple equations can be derived for these three effects which can account for the sign and magnitude of the observed trends using parameters which are derived for the most part from the two binary systems.     

Thermodynamic data for divalent cations onto new modified glycidoxy silica surface at solid/liquid interface

Ethylenediamine molecule was chemically bonded on a silica gel surface previously anchored with 3-glycidoxypropyltrimethoxysilane. This new surface was employed to adsorb divalent cation from aqueous solutions at 298±1 K. The series of adsorption isotherms were adjusted to a modified Langmuir equation from data obtained by suspending the solid with MCl₂ (M=Cu, Ni, Zn and Co) solutions, which gave the maximum number of moles adsorbed as 1.54, 0.56, 0.45 and 0.36 mmol g^-1 for Cu, Ni, Co and Zn, respectively. Suspended aliquots of the chemically modified surface were calorimetrically titrated and the thermodynamic data showed the system is favored enthalpically and by free Gibbs energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of the intermolecular interaction parameters in the water-amide systems based on the data of the excess thermodynamic functions

The molar excess enthalpiesH ^E for the water +N-methyl-2-pyrrolidinone binary mixtures have been measured as functions of mole fraction at 298.15, 308.15 and 318.15 K, using isoperibol rotating calorimeter. A hydrogen bonding pairs model proposed by Luzar was fitted to the experimental dataH ^E,G ^E for the binary mixtures of water with hexamethylphosphoric triamide, N,N-dimethylformamide, N,N-dimethylacetamide and N-methyl-2-pyrrolidinone.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Infrared and Raman spectra and thermodynamic functions of 4-methoxypyridine N-oxide

The infrared spectrum of 4-methoxypyridine N-oxide in the region 4000-30 cm⁻¹ in the solid and liquid states and the polarized laser Raman spectrum of the molecule in the liquid state have been investigated. A vibrational assignment of the observed frequencies based on the state of polarization of the Raman lines and comparison with the related molecules is presented. Ideal gas state thermodynamic functions of the molecule are calculated in the temperature range 273·15–1500° K.