NHS-ester functionalized poly(PEGMA) brushes on silicon surface for covalent protein immobilization

Poly(PEGMA) homopolymer brushes were developed by atom transfer radical polymerization (ATRP) on the initiator-modified silicon surface (Si-initiator). Through covalent binding, protein immobilization on the poly(PEGMA) films was enabled by further NHS-ester functionalization of the poly(PEGMA) chain ends. The formation of polymer brushes was confirmed by assessing the surface composition (XPS) and morphology (atomic force microscopy (AFM), scanning electronic microscopy (SEM)) of the modified silicon wafer. The binding performance of the NHS-ester functionalized surfaces with two proteins horseradish peroxidase (HRP) and chicken immunoglobulin (IgG) was monitored by direct observation. These results suggest that this method which incorporates the properties of polymer brush onto the binding surfaces may be a good strategy suitable for covalent protein immobilization.     

Formation of tetra(ethylene oxide) terminated Si-C linked monolayers and their derivatization with glycine: an example of a generic strategy for the immobilization of biomolecules on silicon

Surface modification with oligo(ethylene oxide) functionalized monolayers terminated with reactive headgroups constitutes a powerful strategy to provide specific coupling of biomolecules with simultaneous protection from nonspecific adsorption on surfaces for the preparation of biorecognition interfaces. To date, oligo(ethylene oxide) functionalized monolayer-forming molecules which can be activated for attachment of biomolecules but which can selectively form monolayers onto hydrogen terminated silicon have yet to be developed. Here, self-assembled monolayers (SAMs) containing tetra(ethylene oxide) moieties protected with tert-butyl dimethylsilyl groups were formed by thermal hydrosilylation of alkenes with single-crystal Si(111)-H. The protection group was used to avoid side reactions with the hydride terminated silicon surface. Monolayer formation was carried out using solutions of the alkene in the high-boiling-point solvent 1,3,5-triethylbenzene. The protecting group was removed under very mild acidic conditions to yield a free hydroxyl functionality, a convenient surface moiety for coupling of biological entities via carbamate bond formation. The chemical composition and structure of the monolayers before and after deprotection were characterized by X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry. To demonstrate the utility of this surface for covalent modification, two reagents were compared and contrasted for their ability to activate the surface hydroxyl groups for coupling of free amines, carbonyl diimidazole (CDI), and disuccinimidyl carbonate (DSC). Analysis of XP spectra before and after activation by CDI or DSC, and after subsequent reaction with glycine, provided quantitative information on the extent of activation and overall coupling efficiencies. CDI activated surfaces gave poor coupling yields under various conditions, whereas DSC mediated activation followed by aminolysis at neutral pH was found to be an efficient method for the immobilization of amines on tetra(ethylene oxide) modified surfaces.     

硅(111)衬底上直接接枝巯基的方法

硅衬底是很有应用前景的表面。这是因为硅衬底在机械上和化学上的适应性能够抵御水环境和有机环境带来的影响。除此之外,优良的电学性质也是它们成为具有应用前景的表面的原因。目前有许多方法来进行硅表面的巯基化,很多情况下是将具有―SH末端的分子接枝到硅衬底上。但这些方法存在反应时间长的问题。在这篇报导中,我们发展了一种新的硅表面巯基化方法。这种方法可以实现将巯基直接接枝到硅片表面。新方法需要对硅衬底进行氯化和巯基化反应,所需的反应时间缩短。X射线光电子能谱（XPS）和接触角测量被用于研究反应中每个步骤的表面表征。     

Self-assembly of high-quality covalently bound organic monolayers onto silicon

A very mild method has been developed to obtain covalently attached alkyl monolayers from the attachment of 1-alkynes onto hydrogen-terminated silicon surfaces at room temperature in the dark. Apart from being the mildest method reported so far for the preparation of such monolayers, their quality, as indicated by water contact angles, XPS, and infrared spectroscopy, equals within experimental error that of the best reported alkyl monolayers on silicon.     

Characterization of poly(sodium styrene sulfonate) thin films grafted from functionalized titanium surfaces

Biointegration of titanium implants in the body is controlled by their surface properties. Improving surface properties by coating with a bioactive polymer is a promising approach to improve the biological performance of titanium implants. To optimize the grafting processes, it is important to fully understand the composition and structure of the modified surfaces. The main focus of this study is to provide a detailed, multitechnique characterization of a bioactive poly(sodium styrene sulfonate) (pNaSS) thin film grafted from titanium surfaces via a two-step procedure. Thin titanium films (～50 nm thick with an average surface roughness of 0.9 ± 0.2 nm) prepared by evaporation onto silicon wafers were used as smooth model substrates. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) showed that the titanium film was covered with a TiO(2) layer that was at least 10 nm thick and contained hydroxyl groups present at the outermost surface. These hydroxyl groups were first modified with a 3-methacryloxypropyltrimethoxysilane (MPS) cross-linker. XPS and ToF-SIMS showed that a monolayer of the MPS molecules was successfully attached onto the titanium surfaces. The pNaSS film was grafted from the MPS-modified titanium through atom transfer radical polymerization. Again, XPS and ToF-SIMS were used to verify that the pNaSS molecules were successfully grafted onto the modified surfaces. Atomic force microscopy analysis showed that the film was smooth and uniformly covered the surface. Fourier transform infrared spectroscopy indicated that an ordered array of grafted NaSS molecules were present on the titanium surfaces. Sum frequency generation vibration spectroscopy and near edge X-ray absorption fine structure spectroscopy illustrated that the NaSS molecules were grafted onto the titanium surface with a substantial degree of orientational order in the styrene rings.     

Adlayers of dimannoside thiols on gold: surface chemical analysis

Carbohydrate films on gold based on dimannoside thiols (DMT) were prepared, and a complementary surface chemical analysis was performed in detail by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), near-edge X-ray absorption fine structure (NEXAFS), FT-IR, and contact angle measurements in order to verify formation of ω-carbohydrate-functionalized alkylthiol films. XPS (C 1s, O 1s, and S 2p) reveals information on carbohydrate specific alkoxy (C-O) and acetal moieties (O-C-O) as well as thiolate species attached to gold. Angle-resolved synchrotron XPS was used for chemical speciation at ultimate surface sensitivity. Angle-resolved XPS analysis suggests the presence of an excess top layer composed of unbound sulfur components combined with alkyl moieties. Further support for DMT attachment on Au is given by ToF-SIMS and FT-IR analysis. Carbon and oxygen K-edge NEXAFS spectra were interpreted by applying the building block model supported by comparison to data of 1-undecanethiol, poly(vinyl alcohol), and polyoxymethylene. No linear dichroism effect was observed in the angle-resolved C K-edge NEXAFS.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

A non-oxidative approach toward chemically and electrochemically functionalizing Si(111)

A general method for the non-oxidative functionalization of single-crystal silicon(111) surfaces is described. The silicon surface is fully acetylenylated using two-step chlorination/alkylation chemistry. A benzoquinone-masked primary amine is attached to this surface via Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition ("click" chemistry). The benzoquinone is electrochemically reduced, resulting in quantitative cleavage of the molecule and exposing the amine terminus. Molecules presenting a carboxylic acid have been immobilized to the exposed amine sites. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and contact angle goniometry were utilized to characterize and quantitate each step in the functionalization process. This work represents a strategy for providing a general platform that can incorporate organic and biological molecules on Si(111) with minimal oxidation of the silicon surface.     

Covalently derivatized NTA microarrays on porous silicon for multi-mode detection of His-tagged proteins

Porous silicon(PSi)was applied as a supporting substrate for stepwise covalent derivatization of undecylenic acid, N-hydroxysuccinimidyl ester(NHS-ester)and nitrilotriacetic acid(NTA).By taking the advantages of porous silicon as a supporting matrix such as high surface area to volume ratio,infrared transparency,porous semiconductors for laser desorption/ionization mass spectroscopy,and low fluorescence background,a multi-mode detection biochip prototype can be realized. We prepared such a protein microarra...     

Chemical surface modifications of microfibrillated cellulose

Microfibrillated cellulose (MFC) was prepared by disintegration of bleached softwood sulphite pulp through mechanical homogenization. The surface of the MFC was modified using different chemical treatments, using reactions both in aqueous- and organic solvents. The modified MFC was characterized with fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Epoxy functionality was introduced onto the MFC surface by oxidation with cerium (IV) followed by grafting of glycidyl methacrylate. The length of the polymer chains could be varied by regulating the amount of glycidyl methacrylate added. Positive charge was introduced to the MFC surface through grafting of hexamethylene diisocyanate, followed by reaction with the amines. Succinic and maleic acid groups could be introduced directly onto the MFC surface as a monolayer by a reaction between the corresponding anhydrides and the surface hydroxyl groups of the MFC.     

In situ electrodeposition of Pt nanoclusters on glassy carbon surface modified by monolayer choline film and their electrochemical applications

Pt nanoclusters attached to the monolayer choline (Ch) modified glassy carbon surface were successfully synthesized by use of in situ cyclic voltammetry (CV) method. Field emission scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical impedance spectroscopy (EIS) were used to characterize the properties of this modified electrode. It was demonstrated that Ch was immobilized onto the carbon surface forming a covalently planted Ch monolayer, which could induce the formation of Pt nanoclusters. The preliminary study found that the homogeneous nanostructured Pt/Ch film exhibited remarkable electrocatalytic activity towards the oxidation of methanol and nitrite.     

Different EDC/NHS activation mechanisms between PAA and PMAA brushes and the following amidation reactions

Infrared spectroscopy was applied to investigate the well-known EDC/NHS (N-ethyl-N'-(3-(dimethylamino)propyl)carbodiimide/N-hydroxysuccinimide) activation details of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) brushes grafted on porous silicon. Succinimidyl ester (NHS-ester) is generally believed to be the dominant intermediate product, conveniently used to immobilize biomolecules containing free primary amino groups via amide linkage. To our surprise, the infrared spectral details revealed that the EDC/NHS activation of PMAA generated anhydride (estimated at around 76% yield and 70% composition), but not NHS-ester (around 5% yield and 11% composition) under the well-documented reaction conditions, as the predominant intermediate product. In contrast, EDC/NHS activation of PAA still follows the general rule, i.e., the expected NHS-ester is the dominant intermediate product (around 45% yield and 57% composition), anhydride the side product (40% yield and 28% composition), under the optimum reaction conditions. The following amidation on PAA-based NHS-esters with a model amine-containing compound, L-leucine methyl ester, generated approximately 70% amides and 30% carboxylates. In contrast, amidation of PAA- or PMAA-based anhydrides with L-leucine methyl ester only produced less than 30% amides but more than 70% carboxylates. The above reaction yields and percentage compositions were estimated by fitting the carbonyl stretching region with 5 possible species, NHS-ester, anhydride, N-acylurea, unreacted acid, unhydrolyzed tert-butyl ester, and using the Beer-Lambert law. The different surface chemistry mechanisms will bring significant effects on the performance of surface chemistry-derived devices such as biochips, biosensors, and biomaterials.     

Azobenzene-containing triazatriangulenium adlayers on Au(111): structural and spectroscopic characterization

Adlayers of different azobenzene-functionalized derivatives of the triazatriangulenium (TATA) platform on Au(111) surfaces were studied by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), gap-mode surface-enhanced Raman spectroscopy (gap-mode SERS), and cyclic voltammetry (CV). The chemical composition of the adlayers is in good agreement with the molecular structure, i.e., different chemical groups attached to the azobenzene functionality were identified. Furthermore, the presence of the azobenzene moieties in the adlayers was verified by the vibration spectra and electrochemical data. These results indicate that the molecules remain intact upon adsorption with the freestanding functional groups oriented perpendicularly to the TATA platform and thus also to the substrate surface.     

Photochemical grafting and patterning of organic monolayers on indium tin oxide substrates

Covalently attached organic layers on indium tin oxide (ITO) surfaces were prepared by the photochemical grafting with 1-alkenes. The surface modification was monitored with static water contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) measurements. Hydrophobic methyl-terminated ITO surfaces can be obtained via the grafting of tetradec-1-ene, whereas the attachment of ω-functionalized 1-alkenes leads to functionalized ITO surfaces. The use of a C≡C-Ge(CH(3))(3) terminus allows for facile tagging of the surface with an azido group via a one-pot deprotection/click reaction, resulting in bio/electronically active interfaces. The combination of nonaggressive chemicals (alkenes), mild reaction conditions (room temperature), and a light-induced grafting that facilitates the direct patterning of organic layers makes this simple approach highly promising for the development of ITO-based (bio)electronic devices.     

光敏性单分散核-壳树莓状PSt/PAM微球制备

采用分散聚合两步加料法,在成核期后向反应体系加入光引发转移终止剂(photo-iniferter)单体2-N,N-二乙基二硫代氨基甲酰氧基乙酸β-甲基丙烯酰氧基乙酯(MAEDCA)制备了核-壳单分散光敏性聚苯乙烯(PSt)微球;进一步,在甲醇介质中,利用光敏性微球在紫外光辐照下引发单体丙烯酰胺(AM)进行表面沉淀接枝聚合,制得了表面亲水、树莓状(raspberry-like)PSt/PAM微球.采用SEM及TEM观察了所得微球的结构和形貌,FTIR、UV-Vis、1H-NMR及XPS分析表明微球的photo-iniferter基团含量随MAEDCA加入量增大而提高,同时补加一定量的MAEDCA、St、AIBN、甲醇及水时所得光敏性PS微球单分散性最好;微球表面接枝PAM后变得亲水并可大量吸附Ag纳米粒子.     

Combination of different chemical surface reactions for the fabrication of chemically versatile building blocks onto silicon surfaces

The use of nucleophilic displacement reactions on bromine-terminated monolayers is presented to create new functional moieties onto silicon surfaces. Functional amines were used as suitable nucleophiles to introduce versatile building blocks onto self-assembled monolayers to perform further surface chemistry toward the fabrication of surfaces with designed properties by combining compatible chemical routes. These modified substrates were analyzed by suitable surface sensitive techniques. Furthermore, the functional monolayers were used for different postmodification reactions. For example, functional amines facilitated with acetylene groups were applied in the click chemistry approach. The use of amino-functionalized terpyridine units leads to the construction of supramolecular systems, where the choice of the metal monocomplex for the complexation is important for the tuning of the surface properties.     

通过硅烷偶联剂在硅和铟锡氧化物(ITO)表面嫁接寡聚芴分子

通过硅烷偶联剂γ-氨丙基三乙氧基硅烷(3-aminopropyl-triethoxysilane,APTES)的“分子桥梁”作用,采用两种不同的方法,把修饰后的寡聚芴分子键联到硅表面和铟锡氧化物(ITO)表面上。X射线光电子能谱(XPS)、原子力显微镜(AFM)和循环伏安(CV)方法等的表征证实了通过硅烷偶联剂在硅表面和ITO表面嫁接寡聚芴分子可行性。     

Covalent assembly of silver nanoparticles on hydrogen-terminated silicon surface

Synthesis of ω-alkenyl-terminated silver nanoparticles (AgNPs) and then their immobilization on a hydrogen-terminated silicon surface in two-dimensional arrangement through covalent interaction are demonstrated. The thermal-induced hydrosilylation at mild conditions facilitate nanoparticles assembly through interaction between terminal alkenyl (CH(2)=CH-) groups of AgNPs and hydrogen-terminated silicon surface. The assembly of AgNPs on a silicon surface is characterized by FESEM and XPS. Adequate coating of 10-undecene-1-thiol (UDT) on AgNPs and mild temperature hydrosilylation impede the fusion or aggregation of nanoparticles, while they immobilized on a silicon surface, which is very crucial to preserve the discrete entities of nanoparticles. This elegant and facile approach provides stable monolayer of AgNPs with very good coverage area and promises potential to fabricate electronic devices and solar cells, where nanoparticles needs to be directly attached to the silicon surface without an interfacial oxide thin film.     

芘分子共价修饰的硅纳米线制备及其发光性能表征

将功能分子共价链接于硅纳米线表面,是发展硅纳米线性能,获得新的硅纳米线器件材料的重要手段.但是对硅纳米线表面的修饰却存在产生不可控制的表面氧化层的缺点,因此有必要发展一种温和的新方法.本文通过羟基(—OH)与硅纳米线表面Si—H键反应生成Si—O—C键,从而在硅纳米线表面引入功能分子.并通过芘醇分子在硅纳米线表面的固定化,证明了这一方法能够温和地实现对硅纳米线表面的共价键修饰.     

Silicon/molecule interfacial electronic modifications

Electronic structures at the silicon/molecule interface were studied by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, inverse photoemission spectroscopy, and Kelvin probe techniques. The heterojunctions were fabricated by direct covalent grafting of a series of molecules (-C6H4-X, with X = NMe2, NH2, NO2, and Mo6 oxide cluster) onto the surface of four types of silicon substrates (both n- and p-type with different dopant densities). The electronic structures at the interfaces were thus systematically tuned in accordance with the electron-donating ability, redox capability, and/or dipole moment of the grafted molecules. The work function of each grafted surface is determined by a combination of the surface band bending and electron affinity. The surface band bending is dependent on the charge transfer between the silicon substrate and the grafted molecules, whereas electron affinity is dependent on the dipole moment of the grafted molecules. The contribution of each to the work function can be separated by a combination of the aforementioned analytical techniques. In addition, because of the relatively low molecular coverage on the surface, the contribution from the unreacted H-terminated surface to the work function was considered. The charge-transfer barrier of silicon substrates attached to different molecules exhibits a trend analogous to surface band bending effects, whereas the surface potential step exhibits properties analogous to electron affinity effects. These results provide a foundation for the utilization of organic molecule surface grafting as a means to tune the electronic properties of semiconductors and, consequently, to achieve controllable modulation of electronic characteristics in small semiconductor devices at future technology nodes.