Screening of tyrosinase inhibitors by capillary electrophoresis with immobilized enzyme microreactor and molecular docking

A new method for screening tyrosinase inhibitors from traditional Chinese medicines (TCMs) was successfully developed by capillary electrophoresis with reliable online immobilized enzyme microreactor (IMER). In addition, molecular docking study has been used for supporting inhibition interaction between enzyme and inhibitors. The IMER of tyrosinase was constructed at the outlet of the capillary by using glutaraldehyde as cross‐linker. The parameters including enzyme reaction, separation of the substrate and product, and the performance of immobilized tyrosinase were investigated systematically. Because of using short‐end injection procedure, the product and substrate were effectively separated within 2 min. The immobilized tyrosinase could remain 80% active for 30 days at 4°C. The Michaelis–Menten constant of tyrosinase was determined as 1.78 mM. Kojic acid, a known tyrosinase inhibitor, was used as a model compound for the validation of the inhibitors screening method. The half‐maximal inhibitory concentration of kojic acid was 5.55 μM. The method was successfully applied for screening tyrosinase inhibitors from 15 compounds of TCM. Four compounds including quercetin, kaempferol, bavachinin, and bakuchiol were found having inhibitory potentials. The results obtained in this work were supported by molecular docking study.     

Continuous-Flow Determination of Phenol With Chemically Immobilized Polyphenol Oxidase (Tyrosinase)

Abstract

The use of covalently bound mushroom polyphenol oxidase (tyrosinase, EC 1.10.3.1) for the determination of μg/mL and ng/mL concentrations of phenol in water samples with use of continuous-flow sample/reagent processing is described. Immobilization on controlled-pore glass, CPG, was accomplished via diazo coupling. Detection was effected with hexacyanoferrate(II) as a redox mediator and was either spectrophotometric or amperometric. the immobilized enzyme preparation was part of an open tubular reactor (CPG thermally embedded on Tygon tubing). the redox mediator was used either in solution or as part of a thin-layer cell and immobilized on poly(4-vinylpyridine) incorporated in a carbon paste electrode. Different spectrophotometric and amperometric strategies are compared and the method is applied to the determination of phenol in water samples and quality control standards.     

Biosensor based on a glassy carbon electrode modified with tyrosinase immmobilized on multiwalled carbon nanotubes

We describe a biosensor for phenolic compounds that is based on a glassy carbon electrode modified with tyrosinase immobilized on multiwalled carbon nanotubes (MWNTs). The MWNTs possess excellent inherent electrical conductivity which enhances the electron transfer rate and results in good electrochemical catalytic activity towards the reduction of benzoquinone produced by enzymatic reaction. The biosensor was characterized by cyclic voltammetry, and the experimental conditions were optimized. The cathodíc current is linearly related to the concentration of the phenols between 0.4???M and 10???M, and the detection limit is 0.2???M. The method was applied to the determination of phenol in water samples.

伞形酮对黄嘌呤氧化酶的抑制作用研究

The investigation on inhibition of xanthine oxidase by umbelliferone was carried out using a polyaniline-xanthine oxidase electrode. The experimental results indicated significant inhibition caused by umbelliferone. The apparent Michaelis-Menten constant (K'm) and the maximum rate (im) of the immobilized xanthine oxidase were both affected by umbelliferone. This indicated that umbelliferone acts as a mixed type of inhibitor of xanthine oxidase. The optimal pH of the immobilized enzyme was hardly affected by umbelliferone; The response current increases with increasing potential in the potential range 0.55~0.68V.     

Screening thermotolerant white-rot fungi for decolorization of wastewaters

To select a thermotolerant fungal strain for decolorization of wastewaters, ligninolytic enzyme production (lignin peroxidase, manganese peroxidase [MnP], and laccase), decolorization, and removal of total phenol and chemical oxygen demand (COD) were detected. Thirty-eight fungal strains were studied for enzyme production at 35 and 43°C on modified Kirk agar medium including 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and MnCl₂. Thirteen strains grew on manganese-containing agar and provided green color on ABTS-containing agar plates under culture at 43°C. Decolorization of wastewater from alcohol distillery (WAD) by these strains was compared under static culture at 43°C, and Pycnoporus coccineus FPF 97091303 showed the highest potential. Thereafter, immobilized mycelia were compared with free mycelia for WAD decolorization under culture conditions of 43°C and 100 rpm. The immobilized mycelia on polyurethane foam enhanced the ligninolytic enzyme production as well as total phenol and color removal. At about the same COD removal, MnP and laccase produced by immobilized mycelia were 2 and 19 times higher than by free mycelia; the simultaneous total phenol and color removal were 3.1 and 1.5 times higher than the latter. Moreover, decolorization of synthesis dye wastewater was carried out at 43°C and 100 rpm. More than 80% of 300 mg/L of reactive blue-5 was decolorized by the immobilized mycelia within 1 to 2 d for four cycles.     

Detection of phenolic compounds in flow systems based on tyrosinase-modified reticulated vitreous carbon electrodes

The fabrication and performance of a reticulated vitreous carbon (RVC)-based tyrosinase flow-through electrode, in which the enzyme was covalently immobilized, is reported. The bioelectrode was tested as an amperometric detector for phenolic compounds. Variables affecting the construction of the enzyme flow-through electrode such as the RVC chemical pretreatment procedure, the enzyme immobilization method in the RVC matrix, the enzyme loading and the pH value of the buffer solution used, were optimized by flow-injection with amperometric detection. A good immobilization of the enzyme in the RVC matrix, in spite of the hydrodynamic conditions, was found. The same tyrosinase-RVC electrode could be used with no significant loss of the amperometric response for around 20 days, and reproducible responses could be achieved with different electrodes constructed in the same manner. Moreover, the operational stability of the bioelectrode was tested under continuous monitorization conditions. Calibration plots by flow injection with amperometric detection at -0.20 V were obtained for phenol, 2,4-dimethylphenol; 3-chlorophenol; 4-chlorophenol; 4-chloro-3-methylphenol and 2-aminophenol, with detection limits ranging from 2 mug l(-1) (4-chloro-3-methylphenol) to 2 mg l(-1).     

Organic-Phase Enzyme Electrode for the Determination of Phenols in Olive Oils

Abstract

A rapid procedure for determining phenols in olive oils, based on an organic-phase enzyme electrode, is described. Direct assays are performed in chloroform solutions which support the tyrosinase activity. This class (phenol)-specific enzyme strongly adheres to the surface of the graphite transducer. The resulting wall-jet detector offers effective flow injection operation, with a detection limit of 4×10^?7 M (0.8 ng) phenol and sample frequency of 60 h^?1. Applicability to olive-oil samples of different origins is illustrated.     

Detection of zeptomolar concentrations of alkaline phosphatase based on a tyrosinase and horse-radish peroxidase bienzyme biosensor

A bienzyme biosensor based on tyrosinase and horse-radish peroxidase is described in a flow injection analysis and cyclic voltammetry for measurement of phenol. Tyrosinase and horse-radish peroxidase were immobilized on the surface of a glassy carbon electrode by bovine serum albumin and glutaric dialdehyde. Phenol was oxidized by tyrosinase and horse-radish peroxidase via catechol to o-quinone in the presence of oxygen and hydrogen peroxide. The o-quinone was reduced to produce catechol (the substrate recycling) on the electrode surface. The enhanced sensitivity of the bienzyme electrode to phenol was observed in the flow injection system comparing with tyrosinase and horse-radish peroxidase monoenzyme electrodes. The mechanisms for enhanced amperometric response to phenol of bienzyme electrode were discussed. The biosensor was used to detect alkaline phosphatase (ALP). A detection limit of 1.4×10⁻¹⁵ M ALP (140 zmol/100 μl) was obtained after 1 h incubation with phenyl phosphate.     

Organophosphorus and carbamate pesticide analysis using an inhibition tyrosinase organic phase enzyme sensor; comparison by butyrylcholinesterase+choline oxidase opee and application to natural waters

Recent research performed in our laboratory (using a butyrylcholinesterase + choline oxidase enzyme electrode) suggested the validity of the biosensor approach using enzyme inhibition OPEEs (i.e. enzyme electrodes working in organic phase) in the case of organophosphorus and carbamate pesticides, which are poorly soluble in aqueous solutions. Since these pesticides are generally much more soluble in chloroform than in water, the present research aimed at analysing this class of pesticides using a tyrosinase inhibition OPEE operating in water-saturated chloroform medium. The tyrosinase biosensor was assembled using an oxygen amperometric transducer coupled to the tyrosinase enzyme, immobilized in kappa-carrageenan gel. Lastly a detailed comparison between the inhibition monoenzymatic tyrosinase and inhibition bienzymatic (butyrylcholinesterase + choline oxidase) OPEEs was performed and discussed in this work.     

Amperometric Flow‐Injection Determination of Phenolic Compounds Using a Biosensor with Immobilized Laccase,Peroxidase and Tyrosinase

A screen‐printed four‐electrode sensor based on immobilization of laccase (Coriolus hirsutus), peroxidase (horseradish) and tyrosinase (mushroom) in the same array was developed for monitoring of phenols. The enzymes were immobilized onto a self‐assembled monolayer (4‐mercapto‐1‐butanol) modified gold surface via covalent attachment by epichlorohydrin coupling. The experimental conditions for simultaneous operation of the three enzymes were optimized based on catechol determination. The sensors were further applied for the amperometric detection of several substituted phenolic compounds, carried out using a single line flow‐injection system. Hydrogen peroxide served as co‐substrate for peroxidase. The limits of detection for phenols in aqueous solutions were in the micromolar range, one assay was completed in less than 5 min. The preliminary studies showed that the compatibility of the above mentioned enzyme array enabled the multielectrode biosensor to be applied to real samples including industrial wastewaters and surface waters.     

Sensitive phenol determination based on co-modifying tyrosinase and palygorskite on glassy carbon electrode

A sensitive tyrosinase biosensor, based on co-modifying tyrosinase and palygorskite on glassy carbon electrode, was developed for phenol analysis. Palygorskite, a kind of natural one-dimensional clay with good biocompatibility, high specific surface area and porous morphology, works as a perfect matrix of enzyme. Tyrosinase retains its inherent bioactivity when immobilized in palygorskite, which leads to a high sensitivity of 1.897 A mol^?1 L. The sensor response achieves 95% of steady-state-current in no more than 3 s, and the linear range of the bioelectrode spans the concentration of phenol from 5?×?10^?8 to 1?×?10^?4 mol L^?1 with a correlation coefficient of 0.9992. The results show no apparent decrease in the response over 2 weeks, and about 80% of the response was retained after 2 months when the electrode was stored at 4–5 °C.     

基于介孔碳的电化学酪氨酸酶生物传感器法测定水体中的苯酚及高效液相色谱法评价

采用新型的介孔碳材料作为固载酪氨酸酶的检测平台构建生物传感器,应用于水体环境中苯酚污染物的检测,并通过高效液相色谱法对电化学酪氨酸酶生物传感器法的准确性进行了评价。研究表明,介孔碳的"空间限制效应"能够防止酪氨酸酶(三维尺寸为6.5 nm×9.8 nm×5.5 nm)体外去折叠失活。基于介孔碳材料构建的电化学酪氨酸酶生物传感器在苯酚污染物检测方面显示了优良的性能,其重现性、灵敏度、稳定性、选择性以及检出限均比较令人满意。基于介孔碳的电化学酪氨酸酶生物传感器对苯酚污染物的检出限达到20 nmol/L,线性范围为0.1~10 μmol/L。采用基于介孔碳的电化学酪氨酸酶生物传感器和高效液相色谱法对实际水样品进行测定结果比对,结果表明该生物传感器方法检测结果准确、有效,适合于苯酚污染物突发污染事件的应急检测。     

L-Dopa Synthesis on Conducting Polymers

With regards to the synthesis of L-Dopa (l-3,4-dihydroxy phenylalanine) two types of biosensors were designed by immobilizing tyrosinase on conducting polymers; polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT). PPy and PEDOT were synthesized electrochemically and tyrosinase immobilized by entrapment during electropolymerization. The kinetic parameters of the designed biosensors, maximum reaction rate of the enzyme (V_max) and Michaelis Menten constant (K_m) were determined. V_max were found as 0.013 for PPy matrix and 0.041 μ mol/min.electrode for PEDOT matrix. K_m values were determined as 3.7 and 5.2mM for PPy and PEDOT matrices respectively. Calibration curves for enzyme activity vs. substrate concentration were drawn for the range of 0.8 to 2.5 mM L-Tyrosine. Optimum temperature and pH, operational and shelf life stabilities of immobilized enzyme were also examined.     

Development of analytic microdevices for the detection of phenol using polymer hydrogel particles containing enzyme-QD conjugates

We present the fabrication of a microdevice for the detection of phenol by combining microfluidic channels and poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel microparticles containing tyrosinase-quantum dot conjugates. PHEMA hydrogel microparticles containing conjugates of enzyme (tyrosinase) and quantum dot (QD) were prepared by dispersion photopolymerization and entrapped within a microfilter-incorporated reaction chamber in a microfluidic channel. The fluorescence change, due to the fluorescence quenching effect caused by the enzyme reaction between phenol and tyrosinase, was used to detect phenol. The fluorescence intensity of PHEMA hydrogel microparticles containing tyrosinase-QD conjugates at 585 nm decreased with phenol concentration. In conclusion, the microfluidic channels fabricated in this study entrapping PHEMA hydrogel microparticles containing enzyme-QD conjugates show the potential to be used as an analytic microdevice for the detection of phenol.     

A phenol biosensor based on immobilizing tyrosinase to modified core-shell magnetic nanoparticles supported at a carbon paste electrode

A phenol biosensor was developed based on the immobilization of tyrosinase on the surface of modified magnetic MgFe₂O₄ nanoparticles. The tyrosinase was first covalently immobilized to core-shell (MgFe₂O₄-SiO₂) magnetic nanoparticles, which were modified with amino group on its surface. The resulting magnetic bio-nanoparticles were attached to the surface of carbon paste electrode (CPE) with the help of a permanent magnet. The immobilization matrix provided a good microenvironment for the retaining of the bioactivity of tyrosinase. Phenol was determined by the direct reduction of biocatalytically generated quinone species at −150 mV versus SCE. The resulting phenol biosensor could reach 95% of steady-state current within 20 s and exhibited a high sensitivity of 54.2 μA/mM, which resulted from the high tyrosinase loading of the immobilization matrix. The linear range for phenol determination was from 1 × 10⁻⁶ to 2.5 × 10⁻⁴ M with a detection limit of 6.0 × 10⁻⁷ M obtained at a signal-to-noise ratio of 3. The stability and the application of the biosensor were also evaluated.     

Development of an amperometric biosensor based on covalent immobilization of tyrosinase on a boron-doped diamond electrode

An amperometric enzyme electrode based on direct covalent immobilization of tyrosinase on a boron-doped diamond (BDD) electrode has been developed for the detection of phenolic compounds. Combined chemical and electrochemical modifications of the BDD film with 4-nitrobenzenediazonium tetrafluoroborate, an aminophenyl-modified BDD (AP–BDD) surface was produced, and then the tyrosinase was covalently immobilized on the BDD surface via carbodiimide coupling. The response dependences of the enzyme electrode (Tyr–AP–BDD electrode) on pH of solution, applied potential, oxygen level and phenolic compounds diffusion were studied. The Tyr–AP–BDD electrode shows a linear response range of 1–200, 1–200 and 1–250 μM and sensitivity of 232.5, 636.7 and 385.8 mA M⁻¹ cm⁻² for phenol, p-cresol and 4-chlorophenol, respectively. 90 percent of the enzyme activity of the Tyr–AP–BDD electrode is retained for 5 weeks storing in 0.1 M PBS (pH 6.5) at 4 °C.     

Direct introduction of amine groups into cellulosic paper for covalent immobilization of tyrosinase: support characterization and enzyme properties

Tyrosinase is used to eliminate phenolic compounds from wastewater. Therefore, its immobilization is important to enhance catalytic efficiency. Papery materials are of particular interest for use as support for enzyme immobilization since the porous microstructure of fiber networks in papers can provide a suitable reaction environment, especially in flow-type catalytic reactions. However, immobilization of protein onto papery structure needs chemical modifications in severe conditions. To overcome this challenge, a cellulosic paper was directly amine-functionalized in moderate conditions and used for tyrosinase immobilization. The support was pretreated with HCl (0.5 N) solution and then sequentially immersed in ethylenediamine (EDA), glutaraldehyde solution (2% v/v) and the crude enzyme. In comparison with the untreated one, the immobilized enzyme on the EDA-treated support offered a 3.7-fold increase in activity. The FTIR spectra as well as EDX analysis proved the presence of amine groups in the cellulosic paper and also covalent immobilization of tyrosinase on the modified support. When considering the effect of pH on the activity at 25 °C, a maximum relative activity of 134% at pH 6 was revealed. Similarly, evaluating the effect of temperature on the activity at pH 7 displayed a maximum relative activity of 152% at 35 °C. The immobilized enzyme was suitable for use for more than four cycles to degrade a phenolic compound at severe pH and temperature conditions. Additionally, the immobilized enzyme was active after treatment of the surface at different pHs and temperatures for 105 min. The chemically modified cellulosic paper can be used as a support for enzyme immobilization.     

磁性固定化酶处理含酚废水的研究

研究了磁性壳聚糖微球(磁性CS-M)及壳聚糖微球(CS-M)固定化辣根过氧化物酶(HRP)对模拟含酚废水的催化效果,探讨了反应时间、酶活力、H2O2浓度及酚浓度对反应的影响。对均相与非均相酶处理酚效果进行比较,显示固定化酶处理含酚废水具有很大的优越性,且磁性酶的效果最佳。     

A glassy carbon electrode modified with graphene and tyrosinase immobilized on platinum nanoparticles for sensing organophosphorus pesticides

An amperometric biosensor is described for the detection of organophosphorus pesticides. It is based on the enzyme tyrosinase immobilized on platinum nanoparticles and the use of a glassy carbon electrode modified with graphene. Tyrosinase was immobilized on the electrode surface via electrostatic interaction between a monolayer of cysteamine and the enzyme. In the presence of catechol as a substrate, the pesticides chlorpyrifos, profenofos and malathion can be determined as a result of their inhibition of the enzyme which catalyzes the oxidation of catechol to o-quinone. Platinum nanoparticles and graphene effectively enhance the efficiency of the electrochemical reduction of o-quinone, thus improving sensitivity. Under optimum experimental conditions, the inhibition effect of the pesticides investigated is proportional to their concentrations in the lower ppb-range. The detection limits are 0.2, 0.8 and 3?ppb for chlorpyrifos, profenofos and malathion, respectively. The biosensor displays good repeatability and acceptable stability.

Microplate based optical biosensor for l-Dopa using tyrosinase from Amorphophallus campanulatus

Developing a biosensor which is capable of simultaneously monitoring l-Dopa levels in multiple samples besides requiring small reaction volume is of great value. The present study describes the detection of l-Dopa using tyrosinase enzyme extracted from Amorphophallus campanulatus and immobilized on the surface of the microplate wells. Among the different approaches used for immobilizing tyrosinase onto the microplate wells, glutaraldehyde treatment was found to be most effective. Besides enzyme activity, ESEM–EDS (environmental scanning electron microscope–energy dispersive system) and Atomic Force Microscopy (AFM) were also carried out to confirm the immobilization of tyrosinase enzyme onto the microplate well surface. This immobilized biocomponent was then integrated with an optical transducer for l-Dopa detection and it showed good reproducibility. The sensing property of the system was studied by measuring the initial rate of dopachrome formation at 475 nm. The calibration plot gave a linear range of detection from 10–1000 μM and the detection limit was calculated to be 3 μM. The immobilized biocomponent was stable for 41 days and was reused up to nine times. Spiked samples (blood plasma) were also analyzed using this biocomponent. This microplate based biosensor thus provides a convenient system for detection of multiple samples in a single run.