Micelle-vesicle transition of oleyldimethylamine oxide in water

We studied the effects of the degree of ionization() and the surfactant concentration (C_d) on the micelle–vesicle transition in salt-free oleyldimethylamine oxide (OlDMAO) aqueous solutions by the dynamic light scattering (DLS), the hydrogen ion titration, the small angle neutron scattering (SANS), the electrophoretic light scattering (ELS) and viscoelastic measurements. From the study of ionization effects, the micelle–vesicle transition was recognized as a change of aggregate size by the DLS measurement; however, the micelle–vesicle transition was not detected both in the ELS measurement and the hydrogen ion titration, suggesting that the electric properties of the worm-like micelles and the vesicles are very similar despite a large difference of shapes between them. From the results of the SANS, the DLS and the viscosity measurements, it was suggested that a concentration-dependent micelle–vesicle transition took place around C_p = 10 mmol kg⁻¹ for the solutions at = 0.5. In the concentration-range 10 mmol kg⁻¹ < C_d < 150 mmol kg⁻¹, the micelles and the vesicles coexisted. In the concentration region (C_d = 10–50 mmol kg⁻¹), the vesicle size increased with the surfactant concentration.     

A23187-mediated Cd uptake by highly stable, polymerized metal-sorbing vesicles

Vesicles formed from the polymerizable phospholipid, 1,2-diacyl-sn-glycero-3-(N-2(methacryloyloxy)ethyl)-phosphocholine, and the crosslinker, 1,2-dihydroxyethylene-bis-acrylamide, exhibit significantly enhanced stability relative to egg phosphatidylcholine (PC) vesicles. As evidenced by absorbance measurements, methacrylate PC vesicles with a 1 : 75 crosslinker-to-lipid molar ratio retain their integrity in up to 20% (v/v) ethanol as opposed to <10% (v/v) for egg PC vesicles. These crosslinked-polymerized vesicles also remain impermeable to Cd²⁺ (in the absence of ionophore) for up to 15 mM octyl glucoside. Furthermore, the crosslinked-polymerized vesicles show enhanced stability under osmotic stress. These inprovements in vesicle robustness are attained without dramatic loss in A23187-mediated Cd²⁺ permeability. The initial Cd²⁺ permeability of crosslinked-polymerized (1 : 75 crosslinker-to-lipid molar ratio) and egg PC vesicles, with A23187 as ionophore, measured 6.0 × 10⁻⁵ and 9.8 × 10⁻⁵ cm s⁻¹, respectively.     

Photostimulated vectorial electron transfer across the bilayer membrane of lipid vesicles in a system with CdS nanoparticles as photosensitizer and 1,4--bis(1,2,6-triphenyl-4-pyridyl)benzene as a reversible two-electron carrier

Photostimulated vectorial electron transfer through the lecithin bilayer membrane was studied in a system based on lipid vesicles with CdS as a photosensitizer located either in the vesicle inner cavity or outside the vesicles. 1,4-Bis(1,2,6-triphenyl-4-pyridyl)benzene (benzoviologen) was used as an effective lipophilic highly reversible electron carrier incorporated into the bilayer membrane. A peculiarity of this electron carrier is its ability to be reversibly reduced on one and two electrons. The interface electron transfer across the border “vesicular cavity-membrane” was studied by stationary and pulse photolysis. The primary photoreduced form of benzoviologen appears to be that reduced by one electron; however, on stationary photolysis, most benzoviologen molecules appear to be affected by two-electron reduction, which can result from the low mutual mobility of CdS nanoparticles and benzoviologen molecules. The CdS photostimulated transmembrane electron transfer from the internal sacrificial donor to the external acceptor (as regards the vesicular cavity) was performed for [CoEDTA]⁻ as the final electron acceptor. The rate constants of electron transfer from the membrane-embedded two-electron reduced form of benzoviologen have been determined in the case of [CoEDTA]⁻ and O₂ as acceptors.     

Polyelectrolyte-coated liposomes: stabilization of the interfacial complexes

Anionic liposomes, composed of egg lecithin (EL) or dipalmitoylphosphatidylcholine (DPPC) with 20 mol% of cardiolipin (CL(2-)), were mixed with cationic polymers, poly(4-vinylpyridine) fully quaternized with ethyl bromide (P2) or poly-l-lysine (PL). Polymer/liposome binding studies were carried out using electrophoretic mobility (EPM), fluorescence, and conductometry as the main analytical tools. Binding was also examined in the presence of added salt and polyacrylic acid (PAA). The following generalizations arose from the experiments: (a) Binding of P2 and PL to small EL/CL(2-) liposomes (60-80 nm in diameter) is electrostatic in nature and completely reversed by addition of salt or PAA. (b) Binding can be enhanced by hydrophobization of the polymer with cetyl groups. (c) Binding can also be enhanced by changing the phase state of the lipid bilayer from liquid to solid (i.e. going from EL to DPPC) or by increasing the size of the liposomes (i.e. going from 60-80 to 300 nm). By far the most promising systems, from the point of view of constructing polyelectrolyte multilayers on liposome cores without disruption of liposome integrity, involve small, liquid, anionic liposomes coated initially with polycations carrying pendant alkyl groups.     

Homogeneity, electrical resistivity and lateral diffusion of lipid bilayers coupled to polyelectrolyte multilayers

The electrostatic coupling of charged phospholipid bilayers with polyelectrolyte multilayers is studied varying the lipid charge density, multilayer composition and preparation conditions. It is shown that in all cases the bilayer is insufficiently insulating for meaningful electrochemical studies. Homogeneity on a light microscopical length scale was obtained by two methods: vesicle fusion into bilayers and deposition from monolayers by the Langmuir–Schäfer (LB/LS) technique. Largest progress was achieved aiming for lateral diffusion comparable to an uncoupled bilayer. For this mixtures with 10% charged (DOPA) and 90% uncharged (DMPC) lipid were prepared that exhibited sufficient anchoring density and at the same time a fluid DMPC phase on going above the main phase transition at 24°C. This yielded diffusion coefficients in aqueous environment above 1 μm² s⁻¹ with almost no immobile fractions.     

Spectrophotometric determination of cadmium with 1-(2-pyridylazo)-2-naphthol and non-ionic surfactants Application to acetic acid extracts of ceramic enamels

The Cd-PAN system in the presence of non-ionic surfactants (polyoxyethylene nonylphenols), which dissolve the reagent and complex by formation of micelles, has been studied spectrophotometrically. The optimum conditions for Cd determination are pH 9 (Na₂B₄O₇-HClO₄), 2% of surfactant and measurement at 555 nm. The complex is Cd(PAN)₂ and its conditional formation constant is 3.5 × 10¹¹. The system obeys the Lambert-Beer law, with an error of 0.9% over the Cd concentration range 0.44–1.74 ppm; the molar absorptivity is 4.94 × 10⁴1·mole⁻¹.cm⁻¹ at 555 nm. The relative standard deviation is 0.7% and the limit of detection 0.009 μg/ml. The selectivity with respect to species important in the ceramic industry is adequate for application of the method to determination of Cd in acetic acid extracts of ceramic enamels.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

Low-molecular-mass anion screening for forensic environmental analyses by capillary zone electrophoresis with indirect UV detection

A method for low-molecular-mass anion screening is described using a buffer composed of 5-sulfosalicylate (SS) as a visualizing ion, hexadimethrine bromide as an electroosmotic flow modifier and Tris as a pH buffer component, at pH 8.6. All ions with effective mobility higher than 2610⁻⁹ m² s⁻¹ V⁻¹ can be separated within 7.5 min under −30 kV. By using the moderately mobile SS (5410⁻⁹ m² s⁻¹ V⁻¹), not only the sensitivity of the detection is improved due to its high UV absorptivity, but also a smaller overall overloading effect is achieved. Meanwhile, the resolution of the high mobility ions, which is normally critical, remains almost the same as compared to a chromate buffer. With an electrokinetic injection, the limit of detection (LOD) of the common ions is 2–13 nM and the detection range is linear up to 0.5–3 μM. With a hydrostatic injection the LOD is 0.15–1 μM and the detection range is linear up to 25–200 μM. The identification of ions is performed by comparing the mobility of the ions with that of standards, taking the apparent and effective mobility of HCO₃⁻, which is normally present in the sample solution, as a reference.     

Studies on elution conditions for the determination of anions by supressed ion-interaction chromatography using a graphitized carbon column

A new method has been developed for ion-interaction chromatography with suppressed conductivity detection and a new graphitized carbon packing, which is sintered from carbonic material at a high temperature. Combinations of various eluting agents, tetrabutylammonium hydroxide (TBA) and acetonitrile have been investigated to optimize the separation of eight common anions (F⁻, Cl⁻, NO₂⁻, Br⁻, NO₃⁻, SO₄²⁻, HPO₄²⁻ and I⁻). Calibration curves were linear from 0.5 to 10 μg/ml for F⁻, from 1.0 to 20 μg/ml for Cl⁻, NO₂⁻ and NO₃⁻, from 2.5 to 50 μg/ml for Br⁻ and SO₄²⁻ and from 5.0 to 100 μg/ml for HPO₄²⁻ and I⁻ with a correlation coefficient (r) of 0.999 or better. The relative standard deviations (R.S.D.s) of peak areas were between 0.2 and 0.9% for 10 repeated measurements. The application of this newly developed method was demonstrated by the determination of chloride, bromide and sulfate in pharmaceutical compounds using the direct injection method. The analytical results were within ±2% (relative) of the theoretical value, and thus in good agreement with the theoretical value for each sample.     

Spectrophotometric determination of nitrate and nitrite in soil and water samples with a diazotizable aromatic amine and coupling agent using column preconcentration on naphthalene supported with ion-pair of tetradecyldimethylbenzylammonium and iodide

Composite diazotization-coupling reagents containing sulfanilamide (SAM), sulfapyridine (SP) or sulfathiazole (ST) as the diazotizable aromatic amines and sodium 1-naphthol-4-sulfonate (NS) as the coupling agent using column preconcentration on naphthalene-tetradecyldimethylbenzylammonium(TDBA)-iodide adsorbent have been used for the spectrometric determination of trace nitrate and nitrite in soil and water samples. Nitrite ion reacts with SAM in the pH range 2.0–5.0, SP in the pH range 2.0–2.5 and ST in the pH range 2.0–3.3 in HCl medium to form water-soluble colourless diazonium cations. These cations were coupled with NS in the pH range 9.0–12.0 for the SAM system, 9.6–12.0 for the SP system and 8.5–12.0 for the ST system to be retained on naphthalene-TDBA-I material packed in a column. The solid mass is dissolved from the column with 5 ml of dimethylformamide and the absorbance is measured spectrometerically at 543 nm for SAM-NS, 533 nm for SP-NS and 535 nm for ST-NS. Nitrate is reduced to nitrite by a copper-coated cadmium reductor column and the nitrite is then treated with the diazotization-coupling reagent by column preconcentration. The absorbance due to the sum of nitrate and nitrite is measured and nitrate is determined by difference. The calibration graph was linear over the range 2–40 ng NO₂⁻-N ml⁻¹ and 1.5–30 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SAM and ST systems and 2–48 ng NO₂⁻-N ml⁻¹ and 1.5–36 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SP system, respectively. The sensitivity, accuracy and precision of the systems decreased in the order STSAMSP. The detection limits were 1.4 ng NO₂⁻-N ml⁻¹ and 1.1 ng NO₃⁻-N ml⁻¹ for SAM, 1.6 ng NO₂⁻-N ml⁻¹ and 1.2 ng NO₃⁻-N ml⁻¹ for SP, and 1.0 ng NO₂⁻-N ml⁻¹ and 0.75 ng NO₃⁻-N ml⁻¹ for ST, respectively. The preconcentration factors are 8, 5 and 6 for SAM-NS, SP-NS and ST-NS, respectively. Interferences from various foreign ions have been studied and the methods have been applied to the determination of ng ml⁻¹ levels of nitrite and nitrate in soil and water samples. The mean recovery was 95–102% for all three systems.     

The rovibrational analysis of the high-resolution IR spectrum of CD2HF below 1200 cm: an interacting tetrad of vibrational levels

The spectrum of CD₂HF was measured by high-resolution interferometric Fourier-transform IR (FTIR) spectroscopy (apodised instrumental band with:0.004 cm⁻¹ fwhm) between 800 and 1200 cm⁻¹ covering the four lowest fundamentals. A complete rotational analysis using a semi-automatic assignment procedure yields accurate band centres (ν₉: 912.2028 cm⁻¹, ν₆:964.4994 cm⁻¹, ν₅: 1050.5104 cm⁻¹, ν₄: 1093.8632 cm⁻¹) and a complete set of first-order Coriolis coupling constants. The most important couplings occur between ν₉ and ν₆ (ξ_a= 1.069 cm⁻¹, ξ_c= −0.3535 cm⁻¹) and between ν₅ and ν₄ (ξ_b= −0.80606 cm⁻¹). The analysis was guided by and compared with results from our ab initio calculations for Coriolis constants and transition moments using CADPAC at TZP/MP2 level.     

The luminescence system of yttrium(III)-BPMPHD-CTMAB and the determination of yttrium(III)

The study indicated that yttrium(III) could form an ion association compound with a new synthetic reagent, 1,6-bi(1′-phenyl-3′-methyl-5′-pyrazolone-4′-)hexanedione (BPMPHD) and cetyl trimethyl ammonium bromide (CTMAB). The compound could enhance the natural fluorescence of BPMPHD by about 260 times, upon which a new fluorescence method was developed for determining yttrium in rare earth (RE) samples. The determination range was 9–900 ng/ml. The detection limit was 1.8 ng/ml. The composition of the ion association was [Y(BPMHD)₂]⁻CTMAB⁺.     

Spectres infrarouges et structure des anions 2-methylallyle, CH3-C(CH2)2- et triméthylèneméthane, C(CH2)3

The infrared spectra of solid samples of C₄H₇K and C₄D₇K have been investigated in the 4000 to 30 cm⁻¹ range. A complete assignment of intramolecular fundamentals of C₄H₇⁻ and C₄D₇⁻ ions and of potassium-allyl vibrations is proposed and the intramolecular force constants are calculated. The C(CH₂)₃²⁻ anion has been identified spectroscopically. Structures of C₃H₅⁻, C₄H₇⁻ and C(CH₃)₃²⁻ are discussed and compared with those optimised by the MINDO/3 method.     

Ion chromatography of organic-rich natural waters from peatlands: I. Cl, NO2, Br, NO3, HPO4, SO4 and oxalate

Organic-rich natural waters from peat bogs in continental (Switzerland) and maritime (Shetland Islands, Scotland) areas were analysed for Cl⁻, NO₂⁻, Br⁻, NO₃⁻, HPO₄²⁻, SO₄²⁻ and oxalate using ion chromatography. These anions can be determined simultaneously in the surface and pore water samples from the continental bogs using a 250-μl injection loop. Using this loop, the detection limits were ca. 5 ng/g for the monovalent anions and SO₄²⁻ and 10 ng/g for HPO₄²⁻ and oxalate. An organics-removal cartridge (Dionex OnGuard P) was used to remove humic materials. These cartridges did not significantly affect the measured concentrations of anions in blind standards. Analyses of deionized water treated with these cartridges are not significantly different from those for untreated deionized water. For the maritime bogs, the relatively high concentrations of Cl⁻ (more than 100μ/g in many samples) and SO₄²⁻ (up to 50 μg/g) require two separate determinations for complete analyses. A 10-μl injection loop was used to determine Cl⁻, Br⁻ and SO₄²⁻. A 250-μl injection loop was used to measure NO₂⁻, NO₃⁻, HPO ₄²⁻ and oxalate. In each instance a Dionex OnGuard P cartridge was used to remove humic materials. In addition, a chloride-removal cartridge (Dionex OnGuard AG) was used to remove Cl⁻ when the larger injection loop was used. This cartridge has no significant effect on the measurement of HPO_4-²⁻ at concentrations of 20 ng/g. In each of the bog water chromatograms there were usually a number of unknown peaks. These are probably due mainly to organic anions.     

One-electron oxidation of mitomycin C and its corresponding peroxyl radicals. A steady-state and pulse radiolysis study

The one-electron oxidation of Mitomycin C (MMC) as well as the formation of the corresponding peroxyl radicals were investigated by both steady-state and pulse radiolysis. The steady-state MMC-radiolysis by OH-attack followed at both absorption bands showed different yields: at 218 nm G_i (-MMC) = 3.0 and at 364 nm G_i (-MMC) = 3.9, indicating the formation of various not yet identified products, among which ammonia was determined, G(NH₃) = 0.81. By means of pulse radiolysis it was established a total κ (OH + MMC) = (5.8 ± 0.2) × 10⁹ dm³ mol⁻¹ s⁻¹. The transient absorption spectrum from the one-electron oxidized MMC showed absorption maxima at 295 nm (ε = 9950 dm³ mol⁻¹ cm^t-1), 410 nm (ε = 1450 dm³ mol⁻¹ cm⁻¹) and 505 nm ( ε = 5420 dm³ mol⁻¹ cm⁻¹). At 280–320 and 505 nm and above they exhibit in the first 150 μs a first order decay, κ₁ = (0.85 ± 0.1) × 10³ s⁻¹, and followed upto ms time range, by a second order decay, 2κ = (1.3 ± 0.3) × 10⁸ dm³ mol^-1 s⁻¹. Around 410 nm the kinetics are rather mixed and could not be resolved.

The steady-state MMC-radiolysis in the presence of oxygen featured a proportionality towards the absorbed dose for both MMC-absorption bands, resulting in a G_i (-MMC) = 1.5. Among several products ammonia-yield was determined G(NH₃) = 0.52. The formation of MMC-peroxyl radicals was studied by pulse radiolysis, likewise in neutral aqueous solution, but saturated with a gas mixture of 80% N₂O and 20% O₂. The maxima of the observed transient spectrum are slightly shifted compared to that of the one-electron oxidized MMC-species, namely: 290 nm (ε = 10100 dm³ mol⁻¹ cm⁻¹), 410 nm (ε = 2900 dm³ mol⁻¹ cm⁻¹) and 520 nm (ε = 5500 dm³ mol⁻¹ cm⁻¹). The O₂-addition to the MMC-one-electron oxidized transients was found to be at 290 to 410 nm gk(MMC·OH + O₂) = 5 × 10⁷ dm³ mol⁻¹ s⁻¹, around 480 nm κ = 1.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and at 510 nm and above, κ = 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The decay kinetics of the MMC-peroxyl radicals were also found to be different at the various absorption bands, but predominantly of first order; at 290–420 nm κ₁ = 1.5 × 10³ s⁻¹ and at 500 nm and above, κ = 7.0 × 10³ s⁻¹.

The presented results are of interest for the radiation behaviour of MMC as well as for its application as an antitumor drug in the combined radiation-chemotherapy of patients.     

The reactions of a dinuclear ferric complex (oxo) di-iron(III) triethylenetetraamminehexaacetate, Fe2O(ttha), with oxidizing and reducing free radicals. A pulse radiolysis study

The rate constants at which oxidizing and reducing radicals react with the dinuclear iron(III) complex Fe₂O(ttha)²⁻ were measured in neutral aqueous solution. The rate constants for reduction of the complex by ·CO₂^.− CH₃^.CHOH and O₂^.− were found to be comparable with rate constants previously measured in mononuclear iron(III) polyaminocarboxylate systems. Fe₂O(ttha)²⁻ reacts slowly with O₂^.− (k₈ = (1.2 ± 0.2) × 10⁴ dm³ mol⁻¹ s⁻¹) and, hence, is a relatively poor catalyst for the dismutation of superoxide radical. The hydrated electron reduces the complex at a diffusion-controlled rate in a process which consumes one proton: e_aq⁻ + Fe₂O(ttha)²⁻ → Fe₂^III,IIO(ttha)³⁻ The reduction by carbon-centered radicals produces a (III,II) mixed-valence complex with an absorption spectrum different from that of the Fe₂(II,III) species produced from reduction by the hydrated electron. The oxidizing radicals ^.OH and ·CO₃⁻ appear to act as reductants of the complex via ligand oxidation rather than by oxidation of the Fe₂^IIIO core to Fe₂^III,IVO. In the former case ligand attack appears to occur mainly at the methylene carbon of a glycinate group. The decarboxylation product, CO₂, was detected by its aquation reaction in the presence of a pH sensitive dye, bromthymol blue.     

Emission quenching of binuclear pyrophosphito platinum(II) complexes in aqueous solution by sulphur dioxide. Spectroscopic measurements on sulphur dioxide addition and chromous ion reduction

The emission intensity at 517 nm from Pt₂(pop)₄⁴⁻ (pop = P₂O₅H₂²⁻) is quenched by the addition of sulphur dioxide. The sulphur dioxide coordinates at the axial platinum(II) sites by a η¹-SO₂ bond. This coordination is supported by ³¹p NMR and Raman spectroscopy of aqueous solutions. The electronic spectrum of a sulphur dioxide saturated solution of Pt₂(pop)₄⁴⁻ shows an absorption at 428.5nm ( = 4.1 × 10⁴). From the decrease in the chromophore for uncomplexed Pt₂(pop)₄⁴⁻ the equilibrium constant for SO₂ binding is estimated to be 1.74 M₂l⁻². The effect of adding different quenchers to aqueous solutions of Pt_2(pop)4⁴⁻ is discussed. The compound Pt₂(pop)₄⁴⁻ will undergo 2-electron reduction with chromous ion.     

Persulphate quenching of the excited state of ruthenium(II) tris-bipyridyl dication: thermal reactions

The rate constant for the reaction between the sulphate radical (SO₄^√−) and the ruthenium (II) tris-bipyridyl dication (Ru(bipy)₃²⁺) is (3.3±0.2)×10⁹ mol⁻¹ dm³ s⁻¹ in 1 mol dm⁻³ H₂SO₄ and (4.9±0.5)×10⁹ mol⁻¹ dm³ s⁻¹ in 0.1 mol dm⁻³, pH 4.7 acetate buffer. The SO₄^√−radical produced by the electron transfer quenching of Ru(bipy)₃^2+* by S₂O₈²⁻ reacts rapidly with both acetate buffer and chloride ions. These side reactions result in a reduction in the overall quantum yield of Ru(bipy)₃³⁺ production and reduced reaction selectivity when Ru(bipy)₃^2+* is quenched by persulphate.     

The ν3 infrared spectrum of the He---NH4 complex

The mid-infrared spectrum of the ionic complex He---NH₄⁺ has been recorded in the vicinity of the triply degenerate ν₃ (t₂) vibration of the free ammonium ion. Apart from a small blue shift (≈ 0.7 cm⁻¹), the spectrum of the complex closely resembles that of the monomer. Ab initio calculations predict a vertex-bound minimum structure with an intermolecular well depth D_e ≈ 150 cm⁻¹, a center-of-mass separation of R_e ≈ 3.17 Å and barriers for internal rotation less than 30 cm⁻¹.     

Are excimers formed along with hydrated electrons in the UV excitation of cyanocuprate(I) ions in aqueous solution?

The three cyanocuprate(I) complexes, Cu(CN)₂⁻, Cu(CN)₃²⁻, and Cu(CN)₄³⁻, photoeject electrons with high efficiency when excited in aqueous solution by 266 nm laser pulses of 7 ns duration with quantum yields of 0.37±0.06, 0.224±0.021, and 0.240±0.005, for Cu(CN)₂⁻ (at 2 M ionic strength), Cu(CN)₃²⁻, and Cu(CN)₄³⁻ (both measured at 1 M ionic strength). Along with hydrated electrons, two transient intermediates, absorbing at 460 and 340 nm, respectively, form consecutively after excitation through bimolecular reactions with ground-state Cu(I) in solutions of Cu(CN)₂⁻, and Cu(CN)₃²⁻, but not in Cu(CN)₄³⁻. All photoprocesses are essentially monophotonic. A mechanism is proposed that suggests the formation of a dinuclear excited-state complex such as an excimer.