茜素修饰碳糊电极吸附伏安法测定痕量铜

报道了采用茜素修饰碳糊电极测定痕量铜的阳极溶出伏安法。在浓度为0 .1 mol/L 的 HAc- Na Ac缓冲溶液 (p H4.5)中 ,于 +0 .1 0 V处富集 ,- 0 .30 V还原后再进行阳极化扫描 ,于 - 0 .0 5V处获得一灵敏的铜的溶出峰 ,二次导数峰电流与铜浓度在 1 .6× 1 0 -9mol/L～ 4.7× 1 0 -7mol/L范围内呈线性关系 ,检出限达 8.0× 1 0 -10 mol/L。同时 ,对电极反应机理进行了讨论。方法应用于锌合金中铜的测定。     

邻苯三酚红修饰碳糊电级阳极溶出伏安法测定痕量锡的研究

研制了邻苯三酚红 ( PR)修饰碳糊电极 ,研究了采用该电极测定痕量锡的阳极溶出伏安法。在 0 .1 5 mol/L乙酸盐缓冲溶液 ( p H 4.5 )中 ,通过开路富集 ,Sn( )与修饰电极表面的邻苯三酚红生成络合物而富集于电极表面 ,然后介质交换至 4.0mol/L盐酸中 ,于 - 0 .80 V还原后再进行阳极化扫描 ,于 - 0 .69V左右获得一灵敏的 Sn的溶出峰 ,二次导数峰电流与 Sn( )浓度在 1 .68× 1 0 - 8～ 1 .68× 1 0 - 6mol/L范围内呈现良好的线性关系 ,检出限达 8× 1 0 - 9mol/L。对电极反应机理进行了讨论 ,方法已应用于罐头食品中锡的测定     

茜素紫修饰碳糊电极吸附阳极溶出伏安法测定痕量锑的研究

报道了采用茜素紫修饰碳糊电极测定痕量锑的阳极溶出伏安法。在 0 .0 3mol·L- 1邻苯二甲酸氢钾 盐酸缓冲溶液 (pH 2 .4 )中 ,通过开路富集 ,Sb(Ⅲ )与茜素紫形成络合物而富集于电极表面 ,然后交换介质至 0 .6mol·L- 1盐酸中 ,于 - 0 .6 0V还原后再进行阳极化扫描 ,于 - 0 .50V左右获得一灵敏的锑的溶出峰 ,二次导数峰电流与Sb(Ⅲ )的浓度在 4 .1× 10 - 9～ 2 .9× 10 - 7mol·L- 1范围内呈线性关系 ,检出限达 1.6× 10 - 9mol·L- 1。方法应用于水样中锑的测定 ,结果满意     

槲皮素化学修饰碳糊电极吸附溶出伏安法测定痕量铅

建立了用槲皮素修饰碳糊电极测定痕量铅的新方法 ,在 0 .1 0mol L甲酸盐缓冲液 (pH 4.3 )中 ,于 -0 .1 0V(vs.SCE)搅拌富集 ,再在 -0 .70V静止还原 40s后 ,阳极化扫描 ,于 -0 .42V左右获得一灵敏的铅阳极溶出峰。在最佳条件下 ,富集不同时间 ,其二次导数峰电流与Pb2 + 在 1 .0× 1 0 - 8～ 8.0× 1 0 - 7mol L和 2 .0× 1 0 - 9～ 6.0× 1 0 - 8mol L两个范围内呈线性关系 ,检出限为 8.0× 1 0 - 1 0 mol L(S N =3 )。同时初步探讨了电极反应机理。     

邻苯三酚红修饰碳糊电极阳极溶出伏安法测定痕量锡的研究

研制了邻苯三酚红(PR)修饰碳糊电极,研究了采用该电极测定痕量锡的阳极溶出伏安法.在0.15 mol/L乙酸盐缓冲溶液(pH 4.5)中,通过开路富集,Sn(Ⅳ)与修饰电极表面的邻苯三酚红生成络合物而富集于电极表面,然后介质交换至4.0mol/L盐酸中,于-0.80 V还原后再进行阳极化扫描,于-0.69 V左右获得一灵敏的Sn的溶出峰,二次导数峰电流与Sn(Ⅳ)浓度在1.68×10-8～1.68×10-6mol/L范围内呈现良好的线性关系,检出限达8×10-9mol/L.对电极反应机理进行了讨论,方法已应用于罐头食品中锡的测定.     

乙二胺四乙酸二钠/碳糊修饰电极测定银离子

报道EDTA/碳糊修饰电极的制备及对银离子的测定。该电极在硝酸介质中 - 0 .6 0V(vs .Ag/AgCl)电位下富集Ag+ ,在 +0 .0 8V处得到一个灵敏的阳极溶出峰 ,峰电流与Ag+ 浓度在 1.0× 10 -9～ 1.0× 10 -6mol/L范围呈良好线性关系 ,检出限为 6 .8× 10 -10 mol/L。     

双硫腙修饰玻碳电极阳极溶出伏安法测定痕量镉和铅

报道了双硫腙修饰玻碳电极同时测定痕量镉和铅的电分析方法。镉和铅离子通过与电极表面的双硫腙发生螯合作用而富集在电极表面 ,同时在 -1 .2 0V(vs.SCE)还原成零价镉和铅 ,当电极电势从 -1 .2 0V向 -0 .3 0V扫描时 ,被还原的镉和铅从电极表面溶出 ,分别于 -0 .78V和 -0 .4 8V左右形成灵敏的阳极溶出峰。优化了支持电解质及pH值、双硫腙用量、富集电位及时间等实验参数。利用该修饰电极测定镉、铅的线性范围分别为 1 .0×1 0 - 8～ 2 .5× 1 0 - 6 mol L和 5 .0× 1 0 - 9～ 2 .5× 1 0 - 6 mol L。检测限分别为 5 .0× 1 0 - 9mol L和7.0× 1 0 - 1 0 mol L。该法用于实际水样中镉和铅的测定 ,平均回收率分别为 99.3 0 %和 99.5 4 %。     

槲皮素修饰碳糊电极吸附溶出伏安法测定人血清中铜

制作了用槲皮素作修饰剂的修饰碳糊电极 ,利用此电极为工作电极 ,建立了测定痕量铜的新方法。在甲酸钠 -盐酸缓冲溶液 ( p H4.7)中 ,于 0 .2 0 V( vs.SCE下同 )处搅拌富集 ,铜 ( )与碳糊修饰电极表面的槲皮素形成电活性络合物而吸附富集于电极表面 ,于 - 0 .40 V静止还原后 ,阳极化线性扫描 ,在 - 0 .0 3V左右获得一灵敏的二次导数溶出峰。在不同富集时间下 ,其二次导数峰电流与铜 ( )浓度分别在1 .5× 1 0 - 9～ 8.0× 1 0 - 8mol/ L和 1 .5× 1 0 - 8～ 9.0× 1 0 - 7mol/ L两个范围内成良好的线性关系 ,检出限可达 8.0× 1 0 - 10 mol/ L。同时探讨了电极反应机理。方法应用于人血清中痕量铜的测定 ,获得了令人满意的结果     

离子交换伏安法同时测定水体中的镉、汞

报道了一种同时快速测定水体中痕量镉、汞的电分析方法。在 p H 4.0 0的磷酸盐缓冲溶液中 ,镉、汞在钠型蒙脱石修饰玻碳电极上通过离子交换富集 ,获得一个灵敏的阳极溶出峰 ,由此可同时测定痕量的镉、汞离子。利用该方法测定镉、汞的线性范围分别为 8× 1 0 - 9到 2× 1 0 - 6 mol/L和 4× 1 0 - 8到 7.5× 1 0 - 6 mol/L ,检出限分别是1× 1 0 - 9mol/L和 8× 1 0 - 9mol/L。该方法简便、快速 ,灵敏度高。用此修饰电极测定了水样中的镉、汞离子 ,结果令人满意     

碳糊电极吸附溶出伏安法测定游离钙

基于Ca(Ⅱ)-茜素红S(ARS)络合物在碳糊电极上的还原波,建立了吸附溶出伏安测定游离钙的新方法。在1.5×10-2mol/LKOH-2.0×10-5mol/LARS介质中,Ca(Ⅱ)-ARS络合物在碳糊电极上于-0.89V处产生一吸附还原波。当富集电位为.0.1V,富集时间90s,扫描速度为100mV/s时,该络合物单扫描阴极溶出峰的二阶导数峰电流与游离钙离子浓度在3.0×10-8~2.0×10-6mol/L范围内呈线性关系;检出限为9.4×10-9mol/L。在0.2mol/LHCl中清洗2min,该电极重现性良好。该方法可用于血清、牛奶和自来水中游离钙的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.