Synthesis, structure and luminescence properties of Cu(ii), Zn(ii) and Cd(ii) complexes with 4'-terphenylterpyridine

The complexes [M(tptpy)(2)](ClO(4))(2) (M = Zn(ii) (1), Cd(ii) (2), and Cu(ii) (3)); tptpy = 4'-[1,1':4',1']terphenyl-4'-yl-[2,2':6',2']terpyridine = 4'-terphenylterpyridine) have been synthesized, structurally characterized by X-ray crystallography and subjected to preliminary luminescence studies. In the crystalline state, all the metal ions have an N(6) coordination sphere of distorted octahedral geometry and the structures of the Zn(ii) and Cd(ii) complexes are isomorphous but differ from that of the Cu(ii) complex, which also differs from the other two in that it is non-emissive. The structure determinations show that aromatic-aromatic interactions involving both the terpyridine heads and the terphenyl tails are important factors influencing the crystalline array. The emission spectra of the Zn(ii) and Cd(ii) complexes are very similar and show a considerable red-shift of the emission maximum compared to that of the free ligand.     

Novel Pb(II), Zn(II), and Cd(II) coordination polymers constructed from ferrocenyl-substituted carboxylate and bipyridine-based ligands

Treatment of two kinds of ferrocenyl-substituted carboxylate ligands (3-ferrocenyl-2-crotonic acid, HOOC-CH=(CH(3))CFc (Fc=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) or O-ferrocecarbonyl benzoic acid, o-HOOCC(6)H(4)COFc with Pb(OAc)(2).3H(2)O, Zn(OAc)(2).2H(2)O, or Cd(OAc)(2).2H(2)O) resulted in four novel ferrocene-containing coordination polymers [[Pb(mu(2)-eta(2)-OOCCH=(CH(3))CFc)(2)].MeOH](n) (1), [[Zn(o-OOCC(6)H(4)COFc)(2)(4,4'-bipy)(H(2)O)(2)].2MeOH.2H(2)O](n) (4,4'-bipy = 4,4'-bipyridine) (2), [[Cd(o-OOCC(6)H(4)COFc)(2)(bpe)(MeOH)(2)].2H(2)O](n) (bpe = 1,2-bis(4-pyridyl)ethene) (3), and [Pb(o-OOCC(6)H(4)COFc)(eta(2)-o-OOCC(6)H(4)COFc)(bpe)](n)() (4). Their crystal structures have been characterized by single X-ray determinations. In polymer 1, Pb(II) ions are bridged by tridentate FcC(CH(3))=CHCOO(-) anions, forming an infinite chain [Pb(mu(2)-eta(2)-OOC=CH(CH(3))CFc)(2)](n). In polymers 2-4, there are three kinds of components, metal ions, o-FcCOC(6)H(4)COO(-) units, and organic bridging ligands. The bipyridine-based ligands connect metal ions leading to a one-dimensional chain with o-FcCOC(6)H(4)COO(-) units acting as monodentate or chelate ligands in the side chain. Such coordination polymers containing ferrocenyl-substituted carboxylate and bipyridine-based ligands are very rare. The solution-state differential pulse voltammetries of polymers 1-4 were determined. The results indicate that the half-wave potential of the ferrocenyl moieties is influenced by the Pb(II) ions in polymer 1 and strongly influenced by Zn(II), Cd(II), or Pb(II) ions in polymers 2-4. The thermal properties of the four polymers were also investigated.     

Dicarboxylated ethynylarenes as buffer-dependent chemosensors for Cd(II), Pb(II), and Zn(II)

Two dicarboxylated ethynylarenes were prepared efficiently from condensation of 1,3-bis(3-aminophenylethynyl)benzene with 2 equiv of either succinic anhydride or glutaric anhydride. These compounds behave as fluorescent chemosensors selective for Cd(II), Pb(II), and Zn(II) cations under buffered aqueous conditions, with analyte binding observed as bathochromically shifted, intensified fluorescence. It was noteworthy that the fluorescence responses varied significantly with buffer identity. A conformational restriction mechanism involving reversible interactions between the fluorophore, metal cation, and buffer itself is proposed.     

Homochiral Zn and Cd coordination polymers containing amino acid-tetrazole ligands

The reactions of (S)-3-cyanophenylalanine with NaN(3) in the presence of H(2)O and Lewis acids (ZnCl(2) and CdCl(2)) afford two unprecedented 3D homochiral networks, mono[(S)-5-(3-tetrazoyl)-phenylalaninato]zinc(II) (1) and mono[(S)-5-(3-tetrazoyl)-phenylalaninato]cadmium(II) monoaqua(II) (2), respectively. The two compounds are isostructural with noninterpenetrated SrAl(2) topology. The structure of these coordination polymers gives new insight into Sharpless' reaction of chiral 5-substituted 1H-tetrazole and homochiral supramolecular array constructions.     

A spectrometric,separation and voltammetric study of the complexation reactions of bromazepam with iron(ii),copper(ii) and cobalt(ii)

Bromazepam, in the form of a cationic iron(II) chelate, can be determined spectrophotometrically at 588 nm with a limit of detection of ca. 10^-6 M. When this chelate is ion-paired with perchlorate, it can be extracted into organic solvents such as 1,2-dichloroethane and 4-methyl-2-pentanone, and determined by atomic absorption spectrometry with a limit of detection of 1.5 × 10^-5 M bromazepam at the iron resonance 248.3-nm line. Ion-pairs involving the Fe(II), Cu(II) and Co(II) chelates and perchlorate can be separated by h.p.l.c. using a C₁₈ reverse-phase column and a mobile phase of 4:1 water—methanol, with a u.v. detector at 242 nm. This approach allowed for the determination of iron(II) ions in aqueous solution with a limit of detection of 10^-8 M. The h.p.l.c. method could also be used to quantify bromazepam spiked in plasma in the concentration range 1–10 μg ml^-1, following extraction of bromazepam from plasma and subsequent formation of the iron(II) ion-pair. Copper(II) forms a labile chelate with bromazepam in pH 4.8 acetate buffer which, when subjected to differential pulse voltammetry at the hanging mercury drop electrode, gives rise to a catalytic phenomenon which can be utilised for the determination of bromazepam in the concentration range 10^-5–10^-9 M.     

Copper(ii), cobalt(ii), manganese(ii) and nickel(ii) bis(hexafluoroacetylacetonate) complexes with N-vinylimidazole

1. Download : Download high-res image (98KB)
2. Download : Download full-size image

     

Spectroscopic and thermal investigations of Cu(II), Zn(II), Cd(II), Pb(II) and Al(III) caproates

Five complexes: Cu(cap)₂·4H₂O, Zn(cap)₂, Cd(cap)₂·4H₂O, Pb(cap)₂ and Al(cap)₃·4H₂O (where cap is the caproate anion?=?CH₃(CH₂)₄COO^?) were synthesized and characterized by elemental analysis, IR-spectroscopy, thermogravimetric analysis (TG), differential thermal analysis (DTA), UV-Vis spectra, ¹H NMR and X-ray powder diffraction (XRD). Using the non-isothermal, Horowitz-Metzger (HM) and Coats-Redfern methods, the kinetic parameters for the non-isothermal degradation of the complexes were calculated using TG data. The infrared and ¹H NMR data are in agreement with coordination through carboxylate, with cap acting as a bridging bidentate ligand. Thermogravimetric analysis of the hydrated complexes shows that the first degradation step is release of water molecules followed by decomposition of the anhydrous complexes, with release of caproate molecules.     

Crystal structures and enhanced luminescence of Zn(II) and Cd(II) complexes containing conjugated organic ligands

By self-assembly of delocalized organic ligands (L¹ and L²) with Cd(SCN)₂, ZnI₂ and Zn(NCS)₂, three luminescent complexes ZnI₂(L¹)₂ (I), [Cd(L¹)₂(μ_1,3-SCN)₂] _n (II) and Zn(NCS)₂(L²)₂ (III) were obtained (L¹ = 2-{5,5-dimethyl-3-[2-(pyridine-4-yl)ethenyl]cyclohex-2-enylidene}propanedinitrile and L² = 2-{5,5-dimethyl-3-[2-(pyridine-3-yl)ethenyl]cyclohex-2-enylidene}propanedinitrile). The structures of the complexes were determined by single crystal X-ray diffraction analysis (CIF files CCDC nos. 1406116 (I), 1406115 (II), and 1400360 (III)). In complex I, Zn(II) is coordinated by two functional organic ligands and two I^– ions, to form a I₂N₂ distorted tetrahedral geometry. In 1D coordination polymer II, the Cd(II) centers show six-coordinated geometries, two organic ligands and four SCN^– ions involve in coordination with each Cd(II) center. The thiocyanate groups show μ_1,3-SCN bridging coordination modes and the adjacent Cd(II) ions are bridged by double μ_1,3-SCN ions to form an infinite chain. In complex III, Zn(II) is coordinated by two functional organic ligands and two NCS^– groups, to form a N₄ distorted tetrahedral geometry. Compared with the free ligands, the complexes show superior luminescent property with red-shift and enhancement of fluorescence intensity.     

Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin

The reaction of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) with Cd(II), Pb(II), Hg(II) and Zn(II) was studied spectrophotometrically and kinetics, equilibrium constants as well as photodecomposition of complexes were determined. It was verified that these metal ions with large radius accelerate the incorporation reaction of zinc into TCPP. On the basis of the mechanism and kinetics of this reaction, a sensitive method for the spectrophotometric determination of trace amounts of Zn(II) has been developed. The molar absorptivity of examined Zn-TCPP complex and Sandell's sensitivity at 423 nm were 3.5×10⁵ M⁻¹ cm⁻¹ and 18.3 ng cm⁻². The detection limit for the recommended procedure was 1.4×10⁻⁹ M (0.9 ng ml⁻¹) and precision in range 20-100 ng ml⁻¹ not exceeds 2.7% RSD. The proposed method applied for zinc determination in natural waters and nutritional supplement was compared with AAS results and declared value.     

Polarographic study of the dipropyldithiophosphinate complexes of Pd(II), Pb(II), Cd(II), and Zn(II) ions

The complexes of the dithiophosphinic acids with Pd(II), Pb(II), Cd(II), and ZN(II) in a toluene-ethanol medium produce single polarographic waves. The half-wave potential is a linear function of the ligand concentration. The stabilities of these chelates, which are characterized by a sulphur-metal bond, are in the order: Pd(II) > Pb(II) > Cd(II) > Zn(II).     

The coordination behaviour of ferrocene-based pyridylphosphine ligands towards Zn(II), Cd(II) and Hg(II)

The reaction of Group 12 metal dihalides MX(2) with the P,N-ligands [Fe(C(5)H(4)-PPh(2))(C(5)H(4)-2-py)] (1) (2-py = pyrid-2-yl), [Fe(C(5)H(4)-PPh(2))(C(5)H(4)-CH(2)-2-py)] (2) and [Fe(C(5)H(4)-PPh(2))(C(5)H(4)-3-py)] (3) (3-py = pyrid-3-yl) was investigated. For a 1 : 1 molar ratio of MX(2) and the respective ligand, three structure types were found in the solid state, viz. chelate, cyclic dimer and chain-like coordination polymer. The M(II) coordination environment is distorted pseudo-tetrahedral in each case. The P-M-N angle is much larger in the chelates (≥119°) than in the ligand-bridged structures (≤109°). 1 prefers the formation of chelates [MX(2)(1-κ(2)N,P)]. 3 forms coordination polymers [MX(2)(μ-3)](n). With the more flexible 2 all three structure types can occur. Dynamic coordination equilibria were observed in solution for the molecular complexes obtained with 1 and 2. NMR data indicate that the N- and P-donor sites interact most strongly with Zn(II) and Hg(II), respectively. While the formation of bis(phosphine)mercury complexes (soft-soft) was easily achieved, no bis(pyridine)zinc complex (borderline-borderline) could be obtained, which is surprising in view of the HSAB principle.     

Modelling the adsorption of Cd(II), Cu(II), Ni(II), Pb(II), and Zn(II) onto Fithian illite

Illite samples from Fithian, IL were purified and saturated with Na(+) ions. The acid-base surface chemistry of the Na-saturated illite was studied by potentiometric titration experiments with 0.1, 0.01, and 0.001 M NaNO(3) solutions as the background electrolyte. Results showed that the titration curves obtained at different ionic strengths did not intersect in the studied pH range. The adsorption of Cd(II), Cu(II), Ni(II), Pb(II), and Zn(II) onto illite was investigated as a function of pH and ionic strength by batch adsorption experiments. Two distinct mechanisms of metal adsorption were found from the experimental results: nonspecific ion-exchange reactions at lower pH values on the basal surfaces and 'frayed edges' and specific adsorption at higher pH values on the mineral edges. Ionic strength had a greater effect on the ion-exchange reactions. The binding constants for the five heavy metals onto illite were determined using the least-square fitting computer program FITEQL. Linear free energy relationships were found between the surface binding constants and the first hydrolysis constants of the metals.     

Synthesis and spectral studies of new macrocyclic Schiff base Cu(II), Ni(II), Cd(II), Zn(II), Pb(II), and La(III) complexes containing pyridine head unit

1,6-Bis(2-formylphenyl) hexane (I) was derived from 1,6-dibromohexane with salicylaldehyde and K₂CO₃ and the ligand (L) was derived from compound I and 2,6-diaminopyridine. Then, the Cu(II), Ni(II), Pb(II), Zn(II), Cd(II), and La(III) complexes with L were synthesized by the reaction of this ligand and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Zn(NO₃)₂ · 6H₂O, Cd(NO₃)₂ · 6H₂O, and La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes were characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, conductivity measurements, and mass spectra. All complexes are diamagnetic and the Cu(II) complex is binuclear. The article is published in the original.     

Glyphosate and ATP binding by mononuclear Zn(ii) complexes with non-symmetric ditopic polyamine ligands

Binding of Zn(ii) by the ditopic ligands L1py, L2py and L1para, composed of a cyclam unit linked to the linear polyamines 1,4,8,11-tetraazaundecane (L1py and L2para) and 1,4,7-triazaheptane (L2py) via a 2,6-dimethylpyridinyl (L1py and L2py) or a 1,4-dimethylbenzyl spacer (L2para), has been analyzed by means of potentiometric and (1)H and (13)C NMR measurements. All ligands form stable mononuclear Zn(ii) complexes in a wide pH range, featuring the metal ion bound to the macrocyclic unit. The open-chain polyamine unit can easily bind several protons in aqueous solution affording protonated metal complexes at neutral and acidic pH values. These complexes behave as bifunctional receptors for the anionic substrates N-(phosphonomethyl)glycine (glyphosate or PMG) and ATP. Potentiometric, (1)H and (31)P NMR measurements show that the Zn(ii) complex with L1py is the better receptor for both substrates, thanks to the simultaneous presence of a pyridine linker functionalized at its 2,6 positions and of a flexible linear tetraamine chain. In fact, these structural features allow a stronger interaction of PMG and ATP with both the protonated tetraamine moiety and the Zn(ii)-cyclam core.     

Novel single-crystal-to-single-crystal anion exchange and self-assembly of luminescent d(10) metal (Cd(II), Zn(II), and Cu(I)) complexes containing C(3)-symmetrical ligands

Ligands L1 and L2' (L1=N,N',N'-tris(4-pyridyl)trimesic amide, L2'=N,N',N'-tris(3-pyridinyl)-1,3,5-benzenetricarboxamide) belonging to an interesting family of tripyridyltriamides with C(3)-symmetry have been utilized to construct 3D porous or hydrogen-bonded frameworks. Through a novel single-crystal-to-single-crystal anion-exchange process, [Cd(L1)(2)(ClO(4))(2)](n) (1c) can be obtained from [Cd(L1)(2)Cl(2)](n) (1b) in the presence of ClO(4)(-) anions. This anion-exchange process is highly selective and only the substitution of Cl(-) by ClO(4)(-) or PF(6)(-) could be realized; Cl(-) was found not to be substituted by BPh(4)(-). This demonstrates that the exchange process depends on the size of the anions in relation to the size of the cavities in the host material (ca. 7.5 A). In addition, the anion-exchange properties of 1 b have also been investigated by means of powder X-ray diffraction (PXRD), elemental analysis (EA), and infrared absorption spectroscopy (IR). Structurally, [Zn(L1)(NO(3))(2)](n)(2) consists of a 2D coordination network with five-coordinate Zn(II) ions. Surprisingly, different trigonal-bipyramidal Zn(II) ions propagate to form distinct respective sheet structures, A and B, which are packed in an A-B-A-B manner in the crystal lattice, and these are hydrogen-bonded to give a 3D extended framework. The molecular structure of [CuI(L2')](n)(3) shows that the Cu(I) ion adopts a distorted tetrahedral geometry, and 3 also forms a 2D coordination network. Significantly, this 2D coordination network is further assembled into a remarkable 3D homochiral framework through triple hydrogen bonding and pi...pi interactions. All of these 3D coordination polymers and/or hydrogen-bonded frameworks are luminescent in the solid state, and their solid-state luminescent properties have been investigated at room temperature and/or at 77 K.     

Complexation Equilibria of Zn(II), Pb(II) and Cd(II) with Reduced Glutathione (GSH) and Biologically Important Zwitterionic Buffers

The interaction of zinc(II), lead(II), and cadmium(II) with Glutathione (S‐L‐glutamyl‐Lcysteinylglycine) as primary ligand and zwitterionic buffers (N‐[2‐Hydroxyethyl]piperazine‐N′‐[2‐ethanesulfonic acid]) (HEPES) and (N‐Hydroxyethyl]piperazine‐N′‐[2‐hydroxy‐propanesulfonic acid]) (HEPPSO) as secondary ligands were studied by potentiometric‐pH titration in 1:1:1 ratio at 25.0 °C and I = 0.1 mol.dm^?3 (KNO₃). The formation constants of different normal and protonated binary and ternary complex species were calculated. Formation constants for the monohydroxy, and dihydroxy complexes for the binary systems M(II) + HEPES and M(II) + HEPPSO have been evaluated. The distribution curves for the various complex species as a function of pH were constructed.     

Stable, trinuclear Zn(ii)- and Cd(ii)-metallocycles: TWIM-MS, photophysical properties, and nanofiber formation

A series of trimeric, Zn(ii)- and Cd(ii)-metallocycles is reported. Structural characterization of the highly stable triangles was supported by traveling-wave ion mobility-mass spectrometry (TWIM-MS) and gradient tandem mass spectrometry (gMS(2)). Their unique photophysical properties and self-assembly to form nanofibers are also described.     

Effect of Ni(ii), Cu(ii) and Zn(ii) association on the keto-enol tautomerism of thymine in the gas phase

The effect of Ni(II), Cu(II) and Zn(II) association on the diketo/keto-enol tautomerism of thymine has been investigated through the use of B3LYP density functional theory calculations. Final energies were obtained at the B3LYP/6-311+G(2df,2p)//B3LYP/6-311+G(d,p) level of theory. Ni(II) and Cu(II) lead to an oxidation of thymine which for Zn(ii) is only partial and catalyze the tautomerization process, this catalytic effect being much larger for Ni(2+) and Zn(2+) than for Cu(2+). One of the most significant consequences of the oxidation of the base is that the calculated BDE's are primarily dictated by the value of the second ionization potential of the metal, and therefore follow the sequence Cu(2+) > Ni(2+) > Zn(2+). Also importantly, metal dication association leads to a stabilization of the keto-enol tautomer, which becomes the most stable form upon interaction with Ni(2+) and Zn(2+). This stabilization enhancement is the consequence of three concomitant factors, namely, (i) a stronger interaction of the metal cation with the carbonyl oxygen, (ii) the interaction of the metal with the dehydrogenated ring nitrogen, (iii) an aromatization of the six-membered ring.     

Simultaneous Determination of Cd(II), Cu(II), Pb(II) and Zn(II) in Human Plasma by Potentiometric Stripping Analysis

In this paper, Potentiometric Stripping Analysis (PSA) was simultaneously used to determine the concentrations of trace metals (Zn, Cd, Pb and Cu) in human plasma. The metal ions were concentrated as their amalgams on the glassy carbon surface of a working electrode that was previously coated with a thin mercury film and then stripped by a suitable oxidant. The selection of the experimental conditions was made by using the experimental‐designed methodology. The optimum conditions of the method includes a 0.2 M HAc‐NaAc buffer mixture (pH 4.5) as supporting electrolyte, and an electrolysis potential of‐1220 mV. The limits of detection (LOD) were obtained 1 μg L^?1 for Zn(II) and Pb(II), 0.5 μg L^?1 for Cu(II) and 2 μg L^?1 for Cd(II) in the studied medium. The good recoveries were obtained for the analysis in human plasma. The method was applied to blood samples, using the method of standard additions and the results were compared with Inductively Coupled Plasma‐Atomic Emission Spectrometry (ICP‐AES) as reference method. Furthermore, a simple digestion protocol of samples is investigated compared to the conventional digestion method.