含半夹心结构铑的1,1'-二硫(硒、碲)二茂铁化合物

以半夹心结构铑的化合物Cp*Rh(CN^tBu)Cl2(1)(Cp*=η^5-C5Me5)与Fe(C5H4ELi)2.2THF反应,合成出异双核二茂铁化合物Cp*Rh(CN^tBu)(EC5H4)2Fe[E=S(2),Se(3),Te(4)]。通过AgBF4氧化2和3得到二茂铁离子型化合物[Cp*Rh(CN^tBu)(EC5H4)2Fe]BF4[E=S(5),Se(6)]。采用元素分析、红外光谱、^1H和13CNMR谱以及EI-MS表征了所合成的化合物。     

2-甲基-5-(2-吡啶基)-1,3,4-噁二唑Cu(Ⅱ),Cd(Ⅱ)配合物的合成,晶体结构和表征（英文）

以2-甲基-5-(2-吡啶基)-1,3,4-噁二唑(L)为配体合成了[Cu2L2(μ-Cl)2Cl2](1)和[CdL2(NO3)2](2),测定了X射线单晶结构,用红外光谱、紫外光谱、荧光及热重分析进行了表征。配体L和配合物2属于单斜晶系,配合物1属于三斜晶系。L,1和2的空间群分别为P21/c,P1和C2/c。配合物1是通过2个氯原子(Cl1,Cl1i)桥联形成的双桥双核Cu(Ⅱ)配合物,具有畸变四方锥构型[CuCl3N2]。配合物2具有畸变八面体构型[CdN4O2]。     

3-苯氧基甲基-4-(4-甲基苯基)-5-(2-吡啶基)-1,2,4-三唑的铜(Ⅱ)、镉(Ⅱ)配合物的合成、晶体结构和光学性质

以3-苯氧基甲基-4-(4-甲基苯基)-5-(2-吡啶基)-1,2,4-三唑(L)为配体分别合成了2个金属配合物即[Cu2L2Cl4]·2H2O(1)和[Cd3L2(μ2-Cl)6]n·2n CH3CN(2),对其进行了红外、紫外、热重、粉末衍射、元素分析和晶体结构等表征。配合物1和2都属于三斜晶系,空间群都为P1,单晶结构分析表明,在配合物1中,中心铜( Ⅱ)原子具有畸变三角双锥构型[Cu N3Cl2];配合物2是配位聚合物,每个重复单元有3个Cd( Ⅱ)原子和2个不同的Cd( Ⅱ)配位中心,Cd1( Ⅱ)原子具有中心对称的畸变八面体构型Cd Cl4N2,Cd2( Ⅱ)原子具有畸变的八面体构型Cd Cl4N2。     

3-苯氧基甲基-4-(4-甲基苯基)-5-(2-吡啶基)-1,2,4-三唑的铜( Ⅱ)、镉( Ⅱ)配合物的合成、晶体结构和光学性质（英文）

以3-苯氧基甲基-4-(4-甲基苯基)-5-(2-吡啶基)-1,2,4-三唑(L)为配体分别合成了2个金属配合物即[Cu2L2Cl4]·2H2O(1)和[Cd3L2(μ2-Cl)6]n·2n CH3CN(2),对其进行了红外、紫外、热重、粉末衍射、元素分析和晶体结构等表征。配合物1和2都属于三斜晶系,空间群都为P1,单晶结构分析表明,在配合物1中,中心铜( Ⅱ)原子具有畸变三角双锥构型[Cu N3Cl2];配合物2是配位聚合物,每个重复单元有3个Cd( Ⅱ)原子和2个不同的Cd( Ⅱ)配位中心,Cd1( Ⅱ)原子具有中心对称的畸变八面体构型Cd Cl4N2,Cd2( Ⅱ)原子具有畸变的八面体构型Cd Cl4N2。     

以2，2′-联嘧啶为副配体的铱配合物的合成、晶体结构和发光性质研究

利用环金属配体2-(4',6'-二氟苯基)吡啶(dfppy)和副配体2,2'-联嘧啶(bpm)合成了一个铱配合物[Ir(dfppy)z(bpm)]Cl,通过1H NMR,质谱,元素分析及红外光谱对其进行了表征,并且测定了其晶体结构.同时利用得到的中间配合物[Ir(dfppy):(bpm)] [Ir(dfppy)2(Cl)2]n晶体结构讨论了配合物形成过程.对配合物[Ir(dfppy)2(bpm)]Cl的紫外可见吸收光谱和发光光谱的研究表明,其常温发射位于609 nm处,初步推测该磷光发射可能来自金属到配体的电荷转移(MLCT)跃迁和配体自身,π→π*跃迁(LC)的混合.     

稀土-锂双金属配合物的研究——(LaCl)DME(μ_2-Cl)_5(μ_3-Cl)(La·DME)Li(THF)_2的合成及其晶体结构

在稀土有机化学中,[Cp_2LnCl]_2和[Cp_2LnCl_2LiL_2][Cp为取代或未取代的环戊二烯基,Ln为稀土离子(III),L为Lewis碱]型化合物是重要的中间物。对含锂烷基、芳基或烯丙基稀土化合物的研究也有着重要的意义。这类分子中含有型桥键结构。由于这类化合物难于结晶及其不稳定性,故很难进行系统的研究。 Rossmanith首先发现了NdCl_3-LiCl-THF溶液的存在。李毅用这一溶液很方便地合成了几个轻稀土-锂双金属有机化合物。但是,在稀土配位化学中,对氯化稀土-氯化锂配合物的研究还很少,对LnCl_3LiCl-THF溶液的认识也有待深化。本文合成了组成为(LaCl)DME(μ_2-Cl)_5(μ_3-Cl)(La·DME)Li(THF)_2的新型桥式链状配合物,并测定了晶体结构。这种类型的稀土双金属配合物尚未见报道。     

Ir(CO)Cla(Ph2Ppy)2HgClb(HgCl2)c(a,b=1,2;c=0,1)的Ir-Hg相互作用和氧化还原反应性质

应用密度泛函理论(DFT)的PBEO方法,金属原子采用SDD基组,H、C、O和N原子采用6-31G*基组,P和Cl原子采用6-311G*基组,对单核配合物Ir(CO)Cl(Ph2Ppy)2(1),双核配合物Ir(CO)(Cl)2(Ph2Ppy)2HgCl(2)、Ir(CO)Cl(Ph2Ppy)2HgCl2(3)和Ir(CO)(Cl)2(HgCl2)(Ph2Ppy)2HgCl(4)进行结构优化,并在优化的基础上采用基组重叠误差(BSSE)校正计算相互作用能,通过自然键轨道(NBO)和前线轨道分析研究Ir-Hg相互作用和氧化还原反应的实质.通过计算发现,Ir(CO)Cl(Ph2Ppy)2与HgCl2发生氧化还原反应得到的产物2和4比非氧化还原产物3稳定.Ir-Hg相互作用强度顺序为3＜4＜2,且随着Ir-Hg相互作用强度增大,HOMO轨道中Ir和Hg成分逐渐趋于接近.配合物2和4都具有一对Ir-Hg成键与反键轨道,其成键轨道的组成分别为0.5985sd0.06Hg+0.8012sd2.48Ir和0.5794sd0.05Hg+0.8151sd2.48Ir,但3中Ir与Hg的相瓦作用较弱,只存在弱相互作用(电荷转移作用),表现为nIr→nHg的直接作用和σIr-P(1)→nHg、σIr-C(1)→nHg的间接作用.     

[Ir(COD)(diphos)Cl配合物活化sp^3 C-H键及其促进CO、CO2插入Ir-C键反应性能的研究

本文利用[Ir(COD)(μ-Cl)]2与双膦螯合配位体之间的反应合成了三个新的配合物[Ir(COD)(diphos)]Cl(diphos=dmpe、depe、dppe),用IR、NMR、电导和元素分析测定了结构.以CH3CN为反应底物分别考察了它们活化sp^3C-H键的能力及其反应规律.在此基础上进一步研究了使CO、CO2插入生成的Ir-CH2CN键的可能性.结果表明:在温和条件下进行这一插入反应是可能的,并用光谱方法证实有相应的含羰基、羧基的金属配合物的生成.     

无机-有机杂化硫属化合物[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)(Q=S、Se)和[Mn(tren)]2(μ-Sn2S6)的合成、晶体 结构与性能

采用溶剂热方法合成了3个多元硫属化合物[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)(Q=S(1)和Se(2))和[Mn(tren)]2(μ-Sn2S6)(3),用X-射线单晶衍射测定了化合物的结构,并通过红外光谱、紫外-可见漫反射光谱对其进行了表征。单晶结构解析表明,化合物1和2都属于正交晶系,Pccn空间群(No.56),晶体结构是由[Mn(1,2-dap)2(H2O)]2+配合物阳离子和[Sn2Q6]4-二聚体通过Mn-Q键连接而成的[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)低聚体,相邻的低聚体之间通过氢键相连形成三维结构。化合物3属于三斜晶系,晶体结构是由[Mn(tren)]2(μ-Sn2S6)单元通过氢键连接而成的二维结构。紫外-可见漫反射光谱结果显示化合物1,2和3的带隙分别为2.5,2.1,2.4 e V,属于半导体材料。     

Ir(CO)Cla(Ph2Ppy)2HgClb(HgCl2)c (a,b=1, 2, c=0, 1)的Ir-Hg相互作用和氧化还原反应性质

应用密度泛函理论(DFT)的PBE0方法, 金属原子采用SDD基组, H、C、O和N原子采用6-31G*基组, P和Cl原子采用6-311G*基组, 对单核配合物Ir(CO)Cl(Ph2Ppy)2(1), 双核配合物Ir(CO)(Cl)2(Ph2Ppy)2HgCl(2)、Ir(CO)Cl(Ph2Ppy)2HgCl2(3)和Ir(CO)(Cl)2(HgCl2)(Ph2Ppy)2HgCl(4)进行结构优化, 并在优化的基础上采用基组重叠误差(BSSE)校正计算相互作用能, 通过自然键轨道(NBO)和前线轨道分析研究Ir-Hg相互作用和氧化还原反应的实质. 通过计算发现, Ir(CO)Cl(Ph2Ppy)2与HgCl2发生氧化还原反应得到的产物2和4比非氧化还原产物3稳定. Ir-Hg相互作用强度顺序为3<4<2, 且随着Ir-Hg相互作用强度增大, HOMO轨道中Ir和Hg成分逐渐趋于接近. 配合物2和4都具有一对Ir-Hg成键与反键轨道, 其成键轨道的组成分别为0.5985sd0.06Hg+0.8012sd2.48Ir和0.5794sd0.05Hg+0.8151sd2.48Ir, 但3中Ir与Hg的相互作用较弱, 只存在弱相互作用(电荷转移作用), 表现为nIr→nHg的直接作用和σIr—P(1)→nHg、σIr—C(1)→nHg的间接作用.     

Syntheses and structures of half-sandwich iridium(III) and rhodium(III) complexes with organochalcogen (S, Se) ligands bearing N-methylimidazole and their use as catalysts for norbornene polymerization

The organochalcogen ligands derived from 3-methyl-imidazole-2-thione/selone groups, Mbit, Mbis, Ebit and Ebis [Mbit = 1,1'-methylenebis(3-methyl-imidazole-2-thione); Mbis = 1,1'-methylenebis(3-methyl-imidazole-2-selone), Ebit = 1,1'-(1,2-ethanediyl)bis(3-methyl-imidazole-2-thione), Ebis = 1,1'-(1,2-ethanediyl)bis(3-methyl-imidazole-2-selone)] have been synthesized and characterized. Reactions of [Cp*Ir(micro-Cl)Cl]2 and [Cp*Rh(micro-Cl)Cl]2 (Cp* = eta5-pentamethylcyclopentadienyl) with Mbit, Mbis, Ebit and Ebis result in the formation of the complexes [Cp*Ir(Mbit)Cl]Cl 1a x Cl), [Cp*Ir(Mbis)Cl]Cl (3a x Cl), [Cp*Ir(Ebit)Cl]Cl (1b x Cl), [Cp*Ir(Ebis)Cl]Cl (2a x Cl), [Cp*Rh(Mbit)Cl]Cl (2b x Cl), Cp*Rh(Mbis)Cl][Cp*RhCl(3)] (3b x[Cp*RhCl(3)]), [Cp*Rh(Ebit)Cl]Cl (4a x Cl) and [Cp*Rh(Ebis)Cl]Cl (4b x Cl), respectively. All compounds have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1b, 2b, 3a, 3b and 4a have been determined by X-ray crystallography. After activation with methylaluminoxane (MAO), the iridium complexes exhibit moderate activities for the vinyl polymerization of norbornene.     

Coordination solids derived from Cp*M(CN)3- (M = Rh,Ir)

Solutions of Rh2(OAc)4 and Et4N[Cp*Ir(CN)3] react to afford crystals of the one-dimensional coordination solid [Et4N[Cp*Ir(CN)3][Rh2(OAc)4]]. This reaction is reversed by coordinating solvents such as MeCN. The structure of the polymer consists of helical anionic chains containing Rh2(OAc)4 units linked via two of the three CN ligands of Cp*Ir(CN)3-. Use of the more Lewis acidic Rh2(O2CCF3)4 in place of Rh2(OAc)4 gave purple [(Et4N)2[Cp*Ir(CN)3]2[Rh2(O2CCF3)4]3], whose insolubility is attributed to stronger Rh-NC bonds as well as the presence of cross-linking. The species [[Cp*Rh(CN)3][Ni(en)n](PF6)] (n = 2, 3) crystallized from an aqueous solution of Et4N[Cp*Rh(CN)3] and [Ni(en)3](PF6)2; [[Cp*Rh(CN)3][Ni(en)2](PF6)] consists of helical chains based on cis-Ni(en)(2)2+ units. Aqueous solutions of Et4N[Cp*Ir(CN)3] and AgNO3 afforded the colorless solid Ag-[Cp*Ir(CN)3]. Recrystallization of this polymer from pyridine gave the hemipyridine adduct [Ag[Ag(py)][Cp*Ir(CN)3]2]. The 13C cross-polarization magic-angle spinning NMR spectrum of the pyridine derivative reveals two distinct Cp* groups, while in the pyridine-free precursor, the Cp*'s appear equivalent. The solid-state structure of [Ag[Ag(py)][Cp*Ir(CN)3]2] reveals a three-dimensional coordination polymer consisting of chains of Cp*Ir(CN)3- units linked to alternating Ag+ and Ag(py)+ units. The network structure arises by the linking of these helices through the third cyanide group on each Ir center.     

Synthesis, reactivity, spectroscopic characterization, X-ray structures, PGSE, and NOE NMR studies of (eta5-C5Me5)-rhodium and -iridium derivatives containing bis(pyrazolyl)alkane ligands

Rhodium(III) and iridium(III) complexes containing bis(pyrazolyl)methane ligands (pz = pyrazole, L' in general; specifically, L1 = H2C(pz)2, L2 = H2C(pzMe2)2, L3 = H2C(pz4Me)2, L4 = Me2C(pz)2), have been prepared in a study exploring the reactivity of these ligands toward [Cp*MCl(mu-Cl)]2 dimers (M = Rh, Ir; Cp* = pentamethylcyclopentadienyl). When the reaction was carried out in acetone solution, complexes of the type [Cp*M(L')Cl]Cl were obtained. However, when L1 and L2 ligands have been employed with excess [Cp*MCl(mu-Cl)]2, the formation of [Cp*M(L')Cl][Cp*MCl3] species has been observed. PGSE NMR measurements have been carried out for these complexes, in which the counterion is a cyclopentadienyl metal complex, in CD2Cl2 as a function of the concentration. The hydrodynamic radius (rH) and, consequently, the hydrodynamic volume (VH) of all the species have been determined from the measured translational self-diffusion coefficients (Dt), indicating the predominance of ion pairs in solution. NOE measurements and X-ray single-crystal studies suggest that the [Cp*MCl3]- approaches the cation, orienting the three Cl-legs of the "piano-stool" toward the CH2 moieties of the bis(pyrazolyl)methane ligands. The reaction of 1 equiv of [Cp*M(L')Cl]Cl or [Cp*M(L')Cl][Cp*MCl3] with 1 equiv of AgX (X = ClO4 or CF3SO3) in CH2Cl2 allows the generation of [Cp*M(L')Cl]X, whereas the reaction of 1 equiv of [Cp*M(L')Cl] with 2 equiv of AgX yields the dicationic complexes [Cp*M(L')(H2O)][X]2, where single water molecules are directly bonded to the metal atoms. The solid-state structures of a number of complexes were confirmed by X-ray crystallographic studies. The reaction of [Cp*Ir(L')(H2O)][X]2 with ammonium formate in water or acetone solution allows the generation of the hydride species [Cp*Ir(L')H][X].     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Divalent dirhodium imido complexes: formation, structure, and alkyne cycloaddition reactivity

Dirhodium amido complexes [(Cp*Rh)2(mu2-NHPh)(mu2-X)] (X = NHPh (2), Cl (3), OMe (4); Cp* = eta5-C5Me5) were prepared by chloride displacement of [Cp*Rh(mu2-Cl)]2 (1) and have been used as precursors to a dirhodium imido species [Cp*Rh(mu2-NPh)RhCp*]. The imido species can be trapped by PMe3 to give the adduct [Cp*Rh(mu2-NPh)Rh(PMe3)Cp*] (5) and undergoes a formal [2 + 2] cycloaddition reaction with unactivated alkynes to give the azametallacycles [Cp*Rh(mu2-eta2:eta3-R1CCR2NPh)RhCp*] (R1 = R2 = Ph (6a), R1 = H, R2 = t-Bu (6b), R1 = H, R2 = p-tol (6c)). Isolation of a relevant unsaturated imido complex [Cp*Rh(mu2-NAr)RhCp*] (7) was achieved by the use of a sterically hindered LiNHAr (Ar = 2,6-diisopropylphenyl) reagent in a metathesis reaction with 1. X-ray structures of 2, 6a, 7 and the terminal isocyanide adduct [Cp*Rh(mu2-NAr)Rh(t-BuNC)Cp*] (8) are reported.     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.     

Tetrametallic clusters (Ir(2)Rh(2)) through an ancillary ortho-carborane-1,2-dichalcogenolato ligands

The tetrametallic cluster complexes {Cp*Ir[E(2)C(2)(B(10)H(9))]}Rh(2)(cod){Cp*Ir[E(2)C(2) (B(10)H(10))]} (E = S; Se) have been synthesized by reactions of the 16-electron half-sandwich iridium complexes [Cp*Ir{E(2)C(2)(B(10)H(10))}] [Cp* = eta(5)-C(5)Me(5), E = S, Se] with [Rh(cod)(micro-OEt)(2)] at room temperature in toluene solution. In the solid state, this tetrametallic cluster exhibits an irregular nearly planar metal skeleton with the two carborane dichalcogenolato ligands bridging the four metal centers from both sides of the tetrametallic plane. Even though all metal atoms coordinate bridging chalcogen atoms, they show different electronic and coordination environments. The molecular structures of and have been determined by X-ray crystallography.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.