催化动力学光度法测定井水中痕量锰

研究了在 NH3· H2 O- NH4 Cl介质中锰催化过氧化氢氧化苋菜红的褪色反应及其动力学条件 ,测定了反应级数和表观活化能 ,建立了测定痕量锰的新方法。该方法的检出限为 2 .7× 1 0 -4 μg/m L Mn,线性范围为 0～ 2 .4μg/2 5m LMn。用于测定井水中痕量 Mn,与原子吸收法的测定结果一致。     

氮气-苯浮选光度法测定痕量锰

提出了根据 Mn( )氧化 I-生成 I2 ,I2 与 I-反应生成 I-3 配阴离子 ,I-3 配阴离子与孔雀绿阳离子发生离子缔合反应 ,用苯和 N2 将此缔合物浮选 ,以光度法测定此缔合物间接测量锰新方法。表观摩尔吸光系数为(ε=5.0 4× 1 0 5 L· mol-1· cm-1) ,测定 5.0μg/2 0 0 m L的锰 ( n=6 ) RSD为 1 .8%。已用于水中锰的测定。     

5-氯-苯并噻唑偶氮苯甲酸光度法测定粉煤灰中微量锰(Ⅱ)

研究了5-氯-苯并噻唑偶氮苯甲酸(5-Cl-BTAEB)与锰的显色反应,在pH5.0的HAc-NaAc缓冲溶液中,乳化剂OP存在下,5-Cl-BTAEB与Mn(Ⅱ)反应生成2∶1稳定络合物,其最大吸收波长为650nm,表观摩尔吸光系数为1.53×105L·mol-1.cm-1。锰含量在0～440μg/L范围内符合比尔定律,方法用于测定粉煤灰中微量锰,结果与催化光度法相符,6次测定值RSD4%。     

锌试剂和高碘酸钾反应动力学测定超痕量锰

在 p H4.74的 HAc- Na Ac缓冲溶液中 ,以氨三乙酸为活化剂 ,KIO4 氧化锌试剂的反应受 Mn( )的催化加速 ,从而建立了测定超痕量锰的新方法。研究了影响反应速率的条件 ,测定了反应的表观活化能及表观速率常数。该法的检出限为 2 .4× 1 0 -11g/m L,测定范围是 0 .0～ 2 0 ng/1 0 m L。可用于蒸馏水中超痕量锰及大豆、面粉中痕量锰的测定     

诱导动力学光度法测定微量锰的研究

基于Mn(Ⅶ)-Cl--Fe(Ⅱ)-SCN-反应体系,提出了利用诱导反应的动力学光度法测定微量锰的方法。该体系在468 nm波长处有最大吸收,线性范围为0~20μg/25 mL,表观摩尔吸光系数为4.91×104L.mol-1.cm-1,检出限为1.39×10-5g.L-1,用于人发、牙膏和水等样品中锰的测定,结果的RSD均小于3.5%,回收率在98.7%至102.0%之间。     

耐尔蓝-高碘酸钾-溴代十六烷基吡啶-氨三乙酸体系催化动力学光度法测定锰

在增敏剂溴代十六烷基吡啶和活化剂氨三乙酸存在的条件下，锰（Ⅱ）对高碘敢钾氧化耐尔蓝的反应具有催化作用，据此建立了测定锰的新方法。该法具有很高的灵敏度和选择性。在最优化的实验条件下，其线性范围为O．4--5．6μg/L；检出限为0．054μg/L(n=8)；相对标准偏差为3．8％。用于水样、蔬菜样品中锰含量的测定，结果令人满意。     

分光光度法测定痕量锰?

碱性条件下,锰?与甲基紫、溴化钾反应形成紫色缔合物,吸收峰位于580 nm,表观摩尔吸光系数ε580=1.6×106 L*mol-1*c m-1,锰浓度在20～160 μg/L范围内遵守比耳定律.本法操作简便,灵敏度高,用于试样中痕量锰的测定,结果令人满意.     

高碘酸钾-酸性品红-NTA-DDMAA体系催化光度法测定良量锰

报道了以氨三乙酸为活化剂,以N-十二烷基二甲基铵基乙酸(DDMAA)为增敏剂,高碘酸钾氧化酸性品红催化光度法测定痕量锰的新方法,在DDMAA存在下,灵敏度提高了7倍(Mn²⁺量为1.2～2.4μg/L)和14倍(Mn²⁺量为2.4～5.2μg/L),相对标准偏差为2.0%,检出限为1.4×10^-7g/L,可用于茶叶中锰的测定.     

茜素红-H2O2-溴代十六烷基吡啶-丙氨酸体系催化光度法测定痕量锰

研究了在溴代十六烷基吡啶(CPB)增敏剂和丙氨酸活化剂存在下,锰(Ⅱ)对过氧化氢氧化茜素红的褪色反应及其动力学条件,建立了测定痕量锰(Ⅱ)的新方法。讨论了pH值和共存离子对痕量锰(Ⅱ)测定的影响。在最佳实验条件下,本法测定痕量锰(Ⅱ)的线性范围为10~360μg/L,检出限为2.01×10-8g/L。方法用于水样中痕量锰(Ⅱ)的测定,结果满意。     

以N-十二烷基二甲基铵基乙酸为增敏剂催化光度法测定锰

基于存在增敏剂N-十二烷基二甲基铵基乙酸（DDMAA）和活化剂氨三乙酸,锰（Ⅱ）催化高碘酸钾氧化萘酚绿B的反应,拟定了测定痕量锰的新催化光度法。本法在两性表面活性剂DDMAA存在下,灵敏度提高10．3倍（Mn~(2+)量为0~6．0μg/L）和5．3倍（Mn~(2+)量为6．0~14μg/L）,相对标准偏差为0．5％,检出限为5．6×10~(-8)g/L,可用于酒样和谷物制品中锰的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.