阳离子选择性膜修饰Ir/IrO_x-pH电极增敏作用研究

采用阳离子选择性透过膜对Ir/IrOx-pH电极表面进行修饰,提高了电极抗阴离子氧化/还原性物质的干扰能力.利用SEM观察离子选择性透过膜的表面孔径分布;通过循环伏安法研究了氧化物电极在Fe(CN)63- 溶液中的电化学行为.实验表明,选择性透过膜对电极的E-pH线性、准确度、响应时间等无影响,显著改善了电极在含氧化/还原性物质中的使用性能.从而提高了电极的抗干扰能力和灵敏度.     

Synthesis of novel IP agonists via N-aminoethyl cyclic amines prepared by decarboxylative ring-opening reactions

An efficient synthesis of a highly potent and selective IP (PGI(2) receptor) agonist that is not structurally analogous to PGI(2) is described. This synthesis is accomplished through the following key steps: Nucleophilic ring-opening of 3-(4-chlorophenyl)-oxazolidin-2-one prepared by a one-pot procedure with 4-piperidinol and selective O-alkylation of 1-(2-(4-chlorophenylamino)ethyl)piperidin-4-ol. The obtained compound is a potent and selective IP agonist displaying a long duration of action.     

Catalytic selective oxidation or oxidative functionalization of methane and ethane to organic oxygenates

Selective oxidation or oxidative functionalization of methane and ethane by both homogeneous and heterogeneous catalysis is presented concerning: (1) selective oxidation of methane and ethane to organic oxygenates by hydrogen peroxide in a water medium in the presence of homogeneous osmium catalysts, (2) selective oxidation of methane to formaldehyde over highly dispersed iron and copper heterogeneous catalysts, (3) selective oxidation of ethane to acetaldehyde and formaldehyde over supported molybdenum cat...     

Comparison of Multi‐walled Carbon Nanotubes and Poly(3‐octylthiophene) as Ion‐to‐Electron Transducers in All‐Solid‐State Potassium Ion‐Selective Electrodes

Multi‐walled carbon nanotubes (MWCNTs) were compared with poly(3‐octylthiophene) (POT) as ion‐to‐electron transducer in all‐solid‐state potassium ion‐selective electrodes with valinomycin‐based ion‐selective membranes. MWCNTs and POT were mixed with the other components of the potassium ion‐selective membrane cocktail (valinomycin, KTpClPB, o‐NPOE, PVC, THF) which was then applied on a glassy carbon (GC) substrate to prepare single‐piece ion‐selective electrodes (SPISEs). Results from potentiometric and impedance measurements showed that the MWCNT‐based electrodes have a more reproducuible standard potential and a lower overall impedance than the electrodes based on POT. Both types of electrodes showed similar sensitivity to potassium ions and no redox sensitivity.     

Spectrochemical evaluation of pyridinium chloride as a possible selective fluorescence quenching agent of polycyclic aromatic hydrocarbons in water and neat acetonitrile

Pyridinium chloride (PC) is examined as a selective, fluorescence quenching agent for alternant as opposed to nonalternant polycyclic aromatic hydrocarbons (PAHs) in two polar solvents - water and acetonitrile. Nine alternant and 13 nonalternant PAHs were dissolved in water and acetonitrile and a total of 0.2 M of pyridinium chloride was added. The resulting change in fluorescence intensity was observed and reported as the Stern-Volmer quenching constant. Results show that PC is a selective quencher in both polar solvents. It selectively quenches the fluorescence emission intensity of alternant PAHs while leaving the nonalternant PAH fluorescence emission virtually unchanged. These results agree with the selective quenching behavior seen for PC surfactant analogs, cetylpyridinium chloride (CPC) and dodecylpyridinium chloride (DDPC). Furthermore, these results illustrate that the presence of a surfactant or micelle is not a requirement for selective quenching. The selective quencher PC is applicable to situations where a surfactant is not desirable or soluble.     

Alternative Syntheses of L-(-)-Oleandrose from L-Rhamnose1 Preparation of Glycals

L-Rhamnal (2) is prepared from L-rhamnose (3) by use of an improved generalized Fischer-Zach reaction. L-Rhamnal (2) is then converted to L-(-)-oleandrose (1) by stannylene mediated selective methylation and effective hydration. Benzyl α-L-oleandrose (12) is prepared by selective methylation and deoxygenation of L-rhamnose (3).     

Anion exchange separation of chromium and molybdenum from iron,vanadium, uranium and other elements in malonic acid solution

Summary Anion-exchange behaviour of chromium (III) and molybdenum (VI) was studied in malonate media. They form anionic complexes with malonic acid at pH 5.6. Various eluants, such as mineral acids and their salts were tested and a selectivity scale evolved. Cr and Mo were separated from Tl(I), alkali and alkaline earth elements by selective sorption and from Co(II), Ni(II), Mn(II), Zn(II) and Cd(II) by selective washing with water. They were separated from many other elements by selective elution. The sequential separation of Fe(III) V(IV), Cr(III), Mo(VI) and U(VI) was significant.     

Colorimetric probes based on anthraimidazolediones for selective sensing of fluoride and cyanide ion via intramolecular charge transfer

Probes based on anthra[1,2-d]imidazole-6,11-dione were designed and synthesized for selective ion sensing. Each probe acted as strong colorimetric sensors for fluoride and cyanide ions and exhibited intramolecular charge transfer (ICT) band, which showed significant red-shifts after addition of either the F(-) or CN(-) ion. One of the probes (2) showed selective colorimetric sensing for both cyanide and fluoride ions. In organic medium, 2 showed selective color change with fluoride and cyanide, whereas in aqueous organic medium it showed a ratiometric response selectively for cyanide ion.     

Wavelength-orthogonal photolysis of neurotransmitters in vitro

Irradiation of a mixture of 4-methoxyphenacyl-caged (S)-glutamate and 4,5-dimethoxy-2-nitrobenzyl-caged γ-amino butyric acid (GABA) on neurons, at ~260 nm, evokes selective photorelease of (S)-glutamate (Glu) whereas photolysis at 405 nm causes selective photorelease of GABA.     

Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization

A simple and effective method for surface molecularly imprinted composite membranes （MICMs） for artemisinin （Ars） based on regenerated cellulose membranes was first prepared through surface- initiated atom transfer radical polymerization （ATRP）, and the as-prepared MICMs were then evaluated as adsorbents for selective recognition and separation of Ars molecules. Batch rebinding studies were conducted to determine the specific adsorption equilibrium, kinetics and selective permeation performance. The adsorption capacity of MICMs toward Ars by the Langmuir isotherm model was 2.008 mgg-1, which was nearly 5.0 times higher than non-molecularly imprinted composite membranes （NICMs）. The kinetic property of MICMs was well-fitted by the pseudo-second-order rate equation. The selective permeation experiments were successfully investigated to prove the excellent selective permeation performance for Ars than the competitive analog （artemether）.     

Porous cobalt(II)-imidazolate supramolecular isomeric frameworks with selective gas sorption property

Two porous supramolecular isomeric frameworks show unique sorption properties, one with temperature dependent stepwise and hysteretic selective sorption of CO(2) while the other one shows gas uptake capacity for CO(2), N(2), H(2) and CH(4) at low temperature and selective sorption of CO(2) over N(2) around room temperature.     

High-performance selective excitation pulses for solid- and liquid-state NMR spectroscopy.

Computer-optimized selective pulses are routinely used in solution-state NMR spectroscopy. At the same time, their utility and importance for solid-state applications has yet to be fully realized. We suggest a new computational approach that makes the design of soft selective pulses with desired properties relatively straightforward. By applying this technique to the generic selective excitation problem, we have arrived at a family of high performance selective excitation pulses, dubbed E-Family, that allows more flexibility and better performance than analogous pulses previously reported in the literature. The new pulses have been successfully tested in both solid- and solution-state NMR experiments. A theoretical treatment of the effects of chemical shift anisotropy (CSA) on the selective excitation in magic-angle spinning (MAS) experiments in solids is presented. The set of heuristics that comprise our new strategy were incorporated into a general NMR simulation program SPINEVOLUTION.     

Fabrication of nanoscale metallic spirals using phospholipid microtubule organizational templates

We describe the fabrication of metallic Cu spiral/helical nanostructures prepared via selective electroless metallization of a phospholipid microtubule template. The metallization template is created through selective, sequential adsorption of the oppositely charged polyelectrolytes, sodium poly(styrenesulfonate) (PSS) and poly(ethyleneimine) (PEI), onto nanoscale seams naturally occurring on the microtubule surface. A negatively charged Pd(II) nanoparticle catalyst is bound to the terminal cationic PEI layer of the multilayer film and initiates selective template metallization to form the helical Cu nanostructures. Details of the process are presented, and a mechanism and factors affecting the control of the feature critical dimensions are discussed.     

Evaluation of culture media for selective enrichment and isolation of Salmonella in seafood

Seafood, including fish, shrimp, clam, crab, mussel, oyster, lobster, squid, octopus, and cuttlefish samples, was used to compare the recovery of Salmonella serovars by different selective enrichment and isolation media. The samples were selectively enriched in Rappaport-Vassiliadis (RV) broth and tetrathionate broth (TT), followed by selective isolation on Hektoen enteric (HE) agar, xylose lysine desoxycholate (XLD) agar, bismuth sulfite (BS) agar, and Brilliant Green (BG) agar media. Of 443 seafood samples analyzed, 108 were found to be contaminated with Salmonella. The role of selective enrichment in Salmonella spp. recovery with RV medium was distinctly high (70%) compared to TT broth (30%). The selective enrichment in RV broth followed by selective isolation on XLD, HE, BS, and BG agar recovered Salmonella at levels of 56, 41, 28, and 16%, respectively. Similarly, after enrichment in TT broth, XLD and HE agars recovered 27 and 23% respectively. The recovery of Salmonella with enrichment in TT followed by isolation on BS and BG was abysmally low at 4.6 and 5%, respectively. There was no significant difference (P > 0.05) in the recovery of Salmonella using the combinations of XLD and HE media with selective enrichment in RV broth. However, performance difference (P < 0.05) was observed in the recovery when BS and BG with RV, and XLD, HE, BS, and BG agars with TT broth were used. The present study showed that the combination of RV with XLD was the most efficient media for isolation of Salmonella from seafood when compared to other isolation media combinations.     

Comparative study of adsorbents performance in ethylene/ethane separation

Some potential adsorbents for ethylene/ethane separation are ethylene selective while the others are ethane selective. Among different adsorbents, i.e., zeolites and metal organic frameworks (MOFs), a comparative study is critical to find the more suitable adsorbent for the separation. In this paper, binary ethylene/ethane adsorption performances of zeolites and MOFs, i.e., equilibrium selectivities and adsorption capacities are investigated utilizing ideal adsorbed solution theory (IAST). IAST model is applied at different gas compositions (0.1–0.9 ethylene mole fractions) and pressures up to 100 kPa. The results revealed that the most selective adsorbent toward ethylene is 5A zeolite while MOFs have higher equilibrium adsorption capacities. Among zeolites and MOFs, 5A and Fe₂(dobdc) have the highest selectivity (27.4 and 13.6) and capacity (≈2.8 and 5.8 mmol ethylene/g) at 100 kPa and 298 K for a 50/50 mixture. Among ethane selective adsorbents, Silicalite-1 zeolite and UTSA-33a (MOF) have the highest selectivity and capacity (≈2.9 and ≈1.5 mmol ethane/g) at 100 kPa and 298 K for a 50/50 mixture, respectively. Investigation showed that adsorption capacity of ethylene selective adsorbents is higher than that of ethane selective ones.     

Performance of selective and partially selective sensors in the recognition of beverages

A sensor array composed of selective and partially selective electrodes is applied to the recognition of beverages: milk, orange juice, and beer. The role of selective and partially selective sensors in classification results is discussed. For this reason two experiments are realized: distinguishing among various types of foodstuffs and the recognition of their origin (manufacturer). In both cases, the measurements were performed in stationary and flow mode. Classical ion-selective electrodes and miniaturized solid-state electrodes were considered.The best results are obtained when the two types of sensor are incorporated in the array, which leads to the highest correctness of the system response. It is however worth to notice, that in the case of some samples (for example, milk) satisfactory results were obtained when only selective or when only partially selective electrodes were applied.     

咪唑衍生物的一锅法选择性合成

1-(2-氰乙基)咪唑与α,ω-二卤代烃、二溴苄及三溴苄选择性地发生季铵化反应,继而在碱作用下发生Hoffmann型消去反应,简便而高效地制备了3个系列咪唑衍生物:1-(ω-卤烷基)咪唑3a～3e、含中心功能基的双咪唑5a～5b和三咪唑6a～6b,并类似地制得相应的苯并咪唑衍生物7和8.     

3D-pharmacophore models for selective A2A and A2B adenosine receptor antagonists

Three-dimensional pharmacophore models were generated for A2A and A2B adenosine receptors (ARs) based on highly selective A2A and A2B antagonists using the Catalyst program. The best pharmacophore model for selective A2A antagonists (Hypo-A2A) was obtained through a careful validation process. Four features contained in Hypo-A2A (one ring aromatic feature (R), one positively ionizable feature (P), one hydrogen bond acceptor lipid feature (L), and one hydrophobic feature (H)) seem to be essential for antagonists in terms of binding activity and A2A AR selectivity. The best pharmacophore model for selective A2B antagonists (Hypo-A2B) was elaborated by modifying the Catalyst common features (HipHop) hypotheses generated from the selective A2B antagonists training set. Hypo-A2B also consists of four features: one ring aromatic feature (R), one hydrophobic aliphatic feature (Z), and two hydrogen bond acceptor lipid features (L). All features play an important role in A2B AR binding affinity and are essential for A2B selectivity. Both A2A and A2B pharmacophore models have been validated toward a wide set of test molecules containing structurally diverse selective antagonists of all AR subtypes. They are capable of identifying correspondingly high potent antagonists and differentiating antagonists between subtypes. The results of our study will act as a valuable tool for retrieving structurally diverse compounds with desired biological activities and designing novel selective adenosine receptor ligands.     

Selecting selective suppressors of selective uptake

Scavenger receptor BI (SR-BI) is a high-density lipoprotein (HDL) receptor that mediates the selective uptake of HDL cholesteryl ester (CE) and the bidirectional flux of free cholesterol (FC). The identification of selective uptake inhibitors holds promise for mechanistic studies of SR-BI and for discovery of pharmaceuticals useful in therapy of atherosclerosis.     

Synthetic multifunctional pores: deletion and inversion of anion/cation selectivity using pM and pH

We report the characterization of multifunctional rigid-rod beta-barrel ion channels with either internal aspartates or arginine-histidine dyads by planar bilayer conductance experiments. Barrels with internal aspartates form cation selective, large, unstable and ohmic barrel-stave (rather than toroidal) pores; addition of magnesium cations nearly deletes cation selectivity and increases single-channel stability. Barrels with internal arginine-histidine dyads form cation selective (PK/Pc1 = 2.1), small and ohmic ion channels with superb stability (single-channel lifetime > 20 seconds). Addition of "protons" results in inversion of anion/cation selectivity (Pc1-/Pk+ = 3.8); addition of an anionic guest (HPTS) results in the blockage of anion selective but not cation selective channels. These results suggest that specific, internal counterion immobilization, here magnesium (but not sodium or potassium) cations by internal aspartates and inorganic phosphates by internal arginines (but not histidines), provides access to synthetic multifunctional pores with attractive properties.