3,6-双(1氢-1,2,3,4-四唑-5-氨基)-1,2,4,5-四嗪的合成与表征

研究了低感度高氮化合物3,6-双(1氢-1,2,3,4-四唑-5-氨基)-1,2,4,5-四嗪的合成,其结构经元素分析,IR,^1H NMR和^13C NMR表征。     

Synthesis, characterization and quantum chemistry study of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine

3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)- 1,2,4,5-tetrazine (BTATz) was synthesized by the condensation of triaminoguanidinium nitrate with 2,4-pentanedione, followed by oxidation and substitution reaction. The product was characterized by elemental analysis, IR, NMR spectrometry and DSC analysis. Instead of nitrogen dioxide/N-methylpyrrolidone, acetic acid/sodium nitrite was used as the oxidizer during the oxidation. Thus, the cost was reduced and the process was simplified. The theoretical properties of BTATz were estimated by a B3LYP method based on a 6-31G(d,p) basis set, and the stable geometric configuration and bond order were obtained. The vibrational frequencies, IR spectrum and thermodynamic properties under different temperatures were obtained from vibrational analysis and the relationship between temperature and thermodynamics properties was deduced. Pyrolysis mechanism of BTATz was discussedand the transition state and activation energy of ring opening reaction of the tetrazole were deduced. __________ Translated from Chinese Journal of Organic Chemistry, 2008, 28(3) (in Chinese)     

3,6-双(1H-1,2,3,4-四唑-5-氨基)-1,2,4,5-四嗪的合成、表征及量子化学研究

以三氨基胍硝酸盐、戊二酮为起始原料, 经缩合、氧化、取代等反应合成了3,6-双(1H-1,2,3,4-四唑-5-氨基)-1,2,4,5-四嗪(BTATz), 并通过元素分析、红外、核磁、差示扫描量热法(DSC)等分析手段对其进行了表征. 采用亚硝酸钠/乙酸代替了二氧化氮/N-甲基吡咯烷酮, 改进了氧化步骤, 降低了成本, 简化了合成工艺. 用B3LYP方法, 在6-31G(d,p)基组水平上对其性能进行了计算, 得到了其稳定的几何构型和键级; 在振动分析的基础上求得体系的振动频率、IR谱及不同温度下的热力学性质, 并得到了温度对热力学性能影响的关系式; 探讨了其热解机理, 推断出四唑环开环时的过渡态和活化能.     

Synthesis and Thermodynamic Properties of M2L[M=Li,Na; L=3,6-Bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine]

Two novel energetic alkalic metal salts of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine (BTATz), Li₂(BTATz)·6H₂O(compound 1) and Na₂(BTATz)·2H₂O(compound 2), have been synthesized by the reaction of BTATz with lithium hydroxide or sodium hydroxide in dimethylsulfoxide(DMSO) solution, respectively, and their structures were characterized by means of elemental analysis and Fourier transform infrared spectrometry(FTIR). Moreover, the single-crystal structure of compound 1 was determined by single crystal X-ray diffraction. It crystallizes in the monoclinic space group P1/c. Furthermore, their thermal decomposition behaviors were investigated by means of differential scanning calorimetry(DSC) and thermogravimetry-differential thermal gravimetry(TG-DTG). The results show that the exothermic decomposition peak temperatures for compounds 1 and 2 were 642.65 and 644.46 K, respectively, and the kinetic equations of the main exothermic decomposition were also derived from non-isothermal method. Additionally, the thermal safety of the two compounds was evaluated by calculating self-accelerating decomposition temperature(T_SADT) and critical temperature of thermal explosion(T_b). The results(the T_SADT and T_b values are 605.43 and 635.69 K for compound 1; 607.38 and 638.96 K for compound 2) reveal that the two compounds exhibit better thermal safety than BTATz.     

Synthesis and Thermal Properties of Three Energetic Ion Salts of 3,6-Bis[(1H-1,2,3,4-tetrazol-5-yl)-amino]-1,2,4,5-tetrazine

Three energetic ion salts of 3,6-bis[(1H-1,2,3,4-tetrazol-5-yl)-amino]-1,2,4,5-tetrazine(BTATz), namely, methylamine salt(compound 1), ethylenediamine salt(compound 2), and diethylamine salt(compound 3), were synthesized and characterized by elemental analysis, Fourier transform infrared spectrometry, NMR spectroscopy, and ^13C NMR spectroscopy. The crystal structure of compound 1 was determined by single-crystal X-ray crystallography, and structural analysis revealed that it belonged to the monoclinic system with P21/c space group. In addition, the thermal behavior of the three compounds was studied by differential scanning calorimetry and thermogravimetry techniques. The thermal decomposition peak temperatures of the compounds were 574.89, 545.60, and 606.72 K, indicating that the three ion salts exhibited good thermal stability. Tlie kinetic mechanism equations of the main decomposition process and the entropy of activation(△S^≠), enthalpy of activation(△H^≠), and Gibbs free energy of activation(△G^≠) of the three compounds were also obtained. Moreover, the thermal safety of the compounds was evaluated by the values of the self^accelerated decomposition temperature(Tsadt)5 thermal ignition temperature(TTIT), and critical temperature of thermal explosion(7b). The results showed that all the compounds demonstrated good thermal safety, and the thermal safety of compound 3 was better than that of the others.     

Dissolution Properties of 2-(Dinitromethylene)-5-methyl-1,3-diazacyclopentane in Dimethyl Sulfoxide and N-Methyl Pyrrolidone

The molar enthalpies of dissolution for 2-(dinitromethylene)-5-methyl-1,3-diazacyclopentane(DNMDZ) in dimethyl sulfoxide(DMSO) and N-methyl pyrrolidone(NMP) were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure. Empirical formulae for the calculation of the molar enthalpies of dissolution(Δ_dissH) were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP. The relationships between the rate constant(k) and the molality(b) and between the reaction order(n) and the molality(b) were determined. The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16(1-α)^1.01 for the dissolution of DNMDZ in DMSO, and dα/dt=10^-2.02(1-α)^0.85 for the dissolution of DNMDZ in NMP, respectively.     

Energetic calcium(II) complexes of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)1,2,4,5-tetrazine: synthesis,crystal structure,and thermal properties

We synthesized two calcium salts of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine (BTATz): [Ca₂(BTATz)₂(H₂O)₈·6H₂O] (1) and Ca(BTATz)(phen)(H₂O)₅·4H₂O (2). Complexes 1 and 2 were characterized by elemental analysis, Fourier transform infrared spectrometry, and single-crystal X-ray diffraction. Structural analysis revealed that Ca(II) was present in different coordination structures in the two complexes. Complex 1 exhibited a symmetric octahedral coordination that included three nitrogens and five water molecules. Complex 2 formed an asymmetric seven-coordinate structure with calcium connected to nitrogen in BTATz and to oxygens. The thermal behaviors of 1 and 2 were characterized via differential scanning calorimetry and thermogravimetry–differential thermal gravimetry. The peak thermal decomposition temperatures of 1 and 2 was 557.39 and 573.86 K, respectively. The kinetic equations of the main exothermic decomposition reaction were also derived. Moreover, the thermal safety of the complexes was evaluated by calculating some important thermodynamic parameters, such as self-accelerated decomposition temperature, thermal ignition temperature, and critical temperature of thermal explosion. Results indicated that both complexes exhibit good potential as a propellant component.     

Oxidations of 3,6-diamino-1,2,4,5-tetrazine and 3,6-bis(s,s-dimethylsulfilimino)-1,2,4,5-tetrazine

Oxidation of 3,6-diamino-1,2,4,5-tetrazine ( 1 ) with most peracids gave 3,6-diamino-1,2,4,5-tetrazine 1,4-dioxide ( 3 ) as the major product; however, treatment of 1 with peroxytrifluoroacetic acid (PTFA) gave 3,6-diamino-1,2,4,5-tetrazine 1-oxide ( 4 ) as the major product along with a small amount of 3-amino-6-nitro-1,2,4,5-tetrazine 2,4-dioxide ( 5 ). Oxidation of 3,6-bis(S,S-dimethylsulfilimino)-1,2,4,5-tetrazine ( 6 ) with 3-chloroperoxybenzoic acid (MCPBA) gave 3-S,S-(dimethylsulfilimino)-6-nitroso-1,2,4,5-tetrazine ( 7 ), which was oxidized further with dimethyldioxirane to 3-(S,S-dimethylsulfoximino)-6-nitro-1,2,4,5-tetrazine ( 8 ). All attempts to obtain 3,6-dinitro-1,2,4,5-tetrazine ( 2 ) by further oxidation of 7 or 8 failed.     

A polymeric sodium complex of 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine

The ligand 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine forms a 1:1 complex with Na[BPh4], which has been structurally characterised as a one-dimensional polymeric system with an unusual coordination geometry about the sodium.     

Theoretical Study on the Azido-cyclization of 3,6-Di(azido)-1,2,4,5-tetrazine

The reactions of azido‐cyclization in 3,6‐di(azido)‐1,2,4,5‐tetrazine were studied by B3LYP hybrid density functional method. The geometries of the reactants, transition states and products were optimized, and the conformation of the initial reactant was determined by IR spectra. In addition, the nucleus‐independent chemical shift (NICS) indices were used to discuss the aromaticity of the products. Moreover, solvent effects were investigated. Results show that the polar solvent DMSO can hardly influence the activation barriers of all the reaction paths; however, it can stabilize the products. Since the activation barriers of azido‐rotation are far less than that of the rate‐determining step (the cyclization of second azido), the products are most probably the mixtures of two isomers (DAT2c and DAT2c').     

Structure and properties of Dinuclear [RuII([n]aneS4)] complexes of 3,6-Bis(2-pyridyl)-1,2,4,5-tetrazine

The synthesis of dinuclear [Ru(II)([n]aneS(4))] (where n = 12, 14) complexes of the bridging ligand 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine are reported. The X-ray structures of both of the new complexes are compared to a newly obtained structure for a dinuclear [Ru(II)([9]aneS(3))]-based analogue, whose synthesis has previously been reported. A comparison of the electrochemistry of the three complexes reveals that the first oxidation of the [Ru(II)([n]aneS(4))]-based systems is a ligand-based couple, indicating that the formation of the radical anion form of the bridging ligand is stabilized by metal center coordination. Spectroelectrochemistry studies on the mixed-valence form of the new complexes suggest that they are Robin and Day Class II systems. The electrochemical and electronic properties of these complexes is rationalized by a consideration of the pi-bonding properties of thiacrown ligands.     

Synthesis and inverse electron demand Diels-Alder reactions of 3,6-bis(3,4-dimethoxybenzoyl)-1,2,4,5-tetrazine

The synthesis of 3,6-bis(3,4-dimethoxybenzoyl)-1,2,4,5-tetrazine (2) and the scope of its reactivity in inverse electron demand Diels-Alder reactions are disclosed representing the first systematic study of the [4 + 2] cycloaddition reactions of 3,6-diacyl-1,2,4,5-tetrazines.     

Crystal and electronic structure of heteromolecular complexes of 3,6-bis(3,5-dymethylpyrazole-1-yl)-1,2,4,5-tetrazine with azoles

X-ray crystallography is used to investigate heteromolecular crystals of 3,6-bis(3,5-dimethylpyrazole-1-yl)-1,2,4,5-tetrazine with NH-donating azole derivatives. The effect is studied of the structure of azole on molecular packing in the crystal and the characteristics of covalent bonds in the molecule of 3,6-disubstituted tetrazine. The distribution of electron density critical points inside crystal cells is analyzed to identify and quantitatively describe the intermolecular interactions underlying the formation of lateral and stacking motifs.     

Behavior of 3,6-Bis(vinylsulfonyl)-1,2,4,5-tetrafluorobenzene in Homolytic Addition of Dialkyl Phosphites

Reaction of 3,6-bis(vinylsulfonyl)-1,2,4,5-tetrafluorobenzene with dialkyl phosphites at thermal initiation (70°C) gives rise to 3,6-bis(dialkoxyphosphonoethylsulfonyl)-1,2,4,5-tetrafluorobenzenes in up to 45% yield. The formation of diethoxyphosphonyl radicals in the course of the reaction was observed with the use of ESR method applying spin trapping by 2-methyl-2-nitrosopropane. The use as initiator of the azo-bis-isobutyronitrile increased the yield of diadducts to 60%.