Bi-ionic membrane potential across a liquid anion-exchange membrane containing triphenyltin chloride

Potentiometric selectivities of a liquid anion-exchange membrane containing triphenyltin chloride (TPTCl) to several inorganic anions were evaluated via measurements of the membrane potential of a bi-ionic system, also called bi-ionic membrane potential. Addition of TPTCl to the liquid anion-exchange membrane, based on the quaternary ammonium salt, gave rise to a quite different selectivity pattern from the so-called Hofmeister anion series observed for the liquid anion-exchange membrane. An additivity rule of the bi-ionic membrane potential was observed to hold for the liquid anion-exchange membrane containing TPTCl. Thus, the following multiple chain rule was derived for selectivity coefficients; k_1,n^pot = k_1,2^pot · k_2,3^pot … k_i,(i+1)^pot … k_n−1,n^pot where k_i,i+1^pot is the selectivity coefficient of the membrane for the (i + 1)th ion over the ith ion.     

Influence of the nature of liquid anion exchanger on the selectivity of anion selective electrodes

Selectivity coefficients of ion-selective electrodes on the basis of liquid anion exchangers, a quaternary phosphonium salt, and 20 higher quaternary ammonium and other nitrogen-containing salts differing in the length of hydrocarbon radicals, the nature of the quaternary nitrogen atom, and the presence of polar groups near to the exchange center with respect to 17 mineral, organic, and metal complex anions are presented. The effect of the nature of the anion-exchanger on the anion selectivity is discussed.     

Study of time changes of anion exchanger electrode characteristics

The elution of the anion exchanger from the membranes of ion-selective electrodes and its influence on the electrode characteristics are studied. The decrease of the exchanger concentration in the PVC membrane depends on the exchanger lipophilicity and the concentration of the counter ion in the external solution. On this basis it is possible to estimate the electrode life time and limit of detection.Dedicated to Professor W. Simon on the occasion of his 60th birthday     

Cyclic voltammetry of biopolymer heparin at PVC plasticized liquid membrane

Cyclic voltammetry is used to study the charge transfer reaction of the biopolymer heparin at the PVC plasticized 1,6-dichlorohexane membrane–solution interface. Several unique feature of the reaction are demonstrated including the apparent diffusion control and the specific interaction of heparin with the cation of the membrane phase, which probably acts as the heparin carrier (ionophore). Voltammetric behaviour corresponds to the interfacial transfer of a mixture of polyanions with a relatively high content of polyanions carrying a low charge. Amperometry appears to be a suitable method for the quantification of heparin in various preparations with the sensitivity of ca. 1 U mL⁻¹ (S/N=3).     

Lead-sensitive membrane electrode based on chelating ion exchanger

A new selective membrane electrode for the measurement of lead activities is proposed. The preparation of active components of the membrane is described. The ready made electrode insert was used in which the PVC membrane was replaced by the prepared membrane. Experimental results document the emf response of profile, the selectivity, the detection limit and the effect of the sample media. The prepared electrode was applied for the measurement of the lead concentration in water samples. Activated alumina micro-column was used for the pre-concentration of lead in the analyzed water samples. The obtained results were compared with those determined by atomic absorption spectrometry.     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate. Received: 9 March 1998 / Revised: 21 April 1998 / Accepted: 25 April 1998     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate.     

Urea sensors based on PVC membrane pH electrode

Several procedures of urease immobilization on the surface of the polymeric membrane pH electrode with tri-n-dodecylamine as a neutral carrier were compared. The best results were obtained for the urea sensor with covalently bound urease. The sensor characteristics including the effect of buffer, pH and concentration and the effect of stirring rate are presented. These effects are in good agreement with theoretical expectations.     

Hydralazine-selective PVC membrane electrode based on hydralazinium tetraphenylborate

A hydralazine ion-selective PVC membrane electrode based on hydralazinium tetraphenylborate has been prepared with dioctyl phthalate as plasticizer. The electrode showed linear response with a slope factor of 57.5 mV/concentration decade at 20 degrees over the concentration range from 4 x 10(-4) to 10(-1)M hydralazine. The effects, on the electrode performance, of membrane composition, pH of the test solution and the time of soaking were studied. The electrode exhibited good selectivity for hydralazine with respect to a large number of inorganic cations and organic substances of biological importance. The standard-addition method and potentiometric titrations were used to determine hydralazine concentrations in pure solutions and in a pharmaceutical preparation, with satisfactory results.     

Effect of stearate preheating on the thermal stability of plasticized PVC compounds

Effect of preheating of stearates on the processing and post-processing thermal stability of poly(vinyl chloride) compounds, plasticized with di(2-ethylhexyl) phthalate (DEHP) and epoxidized soybean oil (ESO), using several ratios of calcium/zinc stearates and DEHP/ESO is reported. The compounds were prepared as follows: (1) dry-blending the compound components, (2) pelletizing the dry-blend and (3) extruding the pellets to obtain a ribbon geometry. Processing stability was determined by: (a) mechanical characterization and (b) visual color comparison of extruded samples. Post-processing thermal stability was followed by: (a) measurement of HCl release from heated pellets and (b) color changes in heated ribbon samples. From a practical point of view, the preheating has a negligible effect on the initial color of formulations; except for the case of formulations without both ESO and CaSt₂. However, the effect of the preheating on the post-processing thermal stability is strongly determined by the composition formulation.     

Prodigiosin is a chloride carrier that can function as an anion exchanger

The natural product prodigiosin 1, often described as an H+/Cl- symport cotransporter, can transport Cl- across lipid vesicles via an anion exchange (or antiport) mechanism.     

Sulfate-selective PVC membrane electrode based on a strontium Schiff's base complex

A strontium Schiff's base complex (SS) can be used as a suitable ionophore to prepare a sulfate-selective PVC-based membrane electrode. The use of oleic acid (OA) and hexadecyltrimethylammonium bromide (HTAB), as additives, and nitrobenzen (NB), dibutyl phthalate (DBP) and benzyl acetate (BA) as solvent mediators, were investigated. The best performance was observed with a membrane composition PVC: NB: SS: HTAB of 30%: 62%: 5%: 3% ratio. The resulting sensor works well over a wide concentration range (1.0 x 10(-2)-1.0 x 10(-6) M) with a Nernstian slope of -29.2 mV per decade of sulfate activity over a pH range 4.0-7.0. The limit of detection of the electrode is 5 x 10(-7) M. The proposed sensor shows excellent discriminating ability toward SO4(2-) ions with regard to many anions. It has a fast response time of about 15 s. The membrane electrode was used to the determination of zinc in zinc sulfate tablets. The sensor was also used as an indicator electrode in the potentiometric titration of SO4(2-) against barium ion.     

气体扩散电极参数对阴离子交换膜燃料电池性能的影响

优化了碱性阴离子交换膜燃料电池（AAEMFC）使用的气体扩散电极（GDE）,发现催化层中PTFE含量与催化剂担载量对电池性能与其电化学动力学特征影响很大.采用i-V曲线,开路电压,电池内阻与在线的电化学阻抗谱与动力学分析,评估了所制GDE的电化学性能.在所研究的AAEMFC电极催化层中,PTFE的最佳含量是20%,Pt载量对膜电极三相界面、催化层导电性与催化剂利用率的影响极大.当制备的GDE催化层中Pt/C的Pt载量为1.0mg/cm²,PTFE含量为20%时,AAEMFC的峰电流密度在50^oC达到了213mW/cm².兼顾Pt催化剂的利用率与成本,在没有明显影响电池性能的情况下,Pt的担载量可降至0.5mg/cm².     

Potentiometric titration of anionic polyelectrolytes using a cationic surfactant solution as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric titration method for the direct determination of anionic polyelectrolytes using a plasticized poly(vinyl chloride) membrane electrode is described. A cationic surfactant solution is used as titrant. The method is based on ion association between the anionic polyelectrolyte in the sample and the cationic surfactant in the titrant. The end-point is detected as a sharp potential change due to an increase in the concentration of the free cationic surfactant at the equivalence point. The sharpness of the titration curve at the end-point is compared for several cationic surfactants; a solution of stearyltrimethylammonium ion has been found to be superior. Received: 8 October 1996 / Revised: 17 December 1996 / Accepted: 18 December 1996     

Potentiometric titration of anionic polyelectrolytes using a cationic surfactant solution as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric titration method for the direct determination of anionic polyelectrolytes using a plasticized poly(vinyl chloride) membrane electrode is described. A cationic surfactant solution is used as titrant. The method is based on ion association between the anionic polyelectrolyte in the sample and the cationic surfactant in the titrant. The end-point is detected as a sharp potential change due to an increase in the concentration of the free cationic surfactant at the equivalence point. The sharpness of the titration curve at the end-point is compared for several cationic surfactants; a solution of stearyltrimethylammonium ion has been found to be superior. Received: 8 October 1996 / Revised: 17 December 1996 / Accepted: 18 December 1996     

功能高分子膜离子选择电极研究VI.压片PVC膜氯离子选择电极的暂态极化行为

Both fast triangle-wave potential sweep method and fast square-wave potential sweep method have been applied to study transient behavior of the functional polymer membrane chloride electrode. On the basis of current-time curve and potential-time curve, the electrochem. parameters of the electrode were calculated successfully under various conditions. The characterization of the level of ion transfer has been made by means of electrochem. polarization resistance Rr which is related not only to the membrane composition and its shape (area etc.), but also to concentration of the chloride ions in solution The Rr values calculated from both methods are the same. Cl- in the concentration range of 10-4-10-1 mol/L showed linear relation between i and log c, where c is the concentration The slope is proportional to the membrane area.     

Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector

 A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade^-1 in a concentration range of 1.0×10^-4 to 1.0×10^-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5×10^-5 mol/L. The relative standard deviation for 5 injections of a 2.5×10^-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h^-1. Received: 9 April 1996/Revised: 8 July 1996/Accepted: 14 July 1996     

Effect of 1,2-polybutadienes on properties of plasticized polyvinyl chloride

The effect of 1,2-polybutadienes of various molecular weights and structures on the rheological and physicomechanical properties and on the heat resistance of plasticized polyvinyl chloride was studied. The possibility of using 1,2-polybutadienes as modifying components of polyvinyl chloride compounds, improving their processability and enhancing their heat resistance, was examined.     

Extraction of pertechnetate by triphenyltin chloride and trioctyltin chloride

The extraction of pertechnetate in form of ionogene associates with triphenyltin and trioctyltin cations into chloroform, benzene, toluene and nitrobenzene was studied. As aqucous phases solutions of^99mTcO ₄ ^? in deionized water and in diluted solutions of NaCl, HCl, NaNO₃, HNO₃ NaClO₄, HClO₄ and NaOH were used. Concerning the organic phases, at the use of triphenyltin chloride the extractibility of pertechnetate increases in the sequence: toluene «chloroform, benzene nitrobenzene and approximately in the sequence: NaOH<NaCl, HCl<NaNO₃<H₂O<NaClO₄ concerning aqueous phases. For trioctyltin chloride in chloroform the extractibility of TcO ₄ ^? increases approximately in the sequence of aqueous phases: NaOH<HCl, NaNO₃, NaClO₄, NaCl«H₂O and in nitobenzene in the sequence NaOH<NaClO₄<HCl<NaNO₃, NaCl«H₂O. The extractibility for trioctyltin chloride is in general slightly lower as compared with triphenyltin chloride. The results of the extraction are presented in the form of graphical plots of technetium distribution ratio (D _Te′ logD _Tc) or extraction yield (E _Tc, %) against concentration of the investigated component in aqueous or organic phase. In some of the systems of the systems studied practically quantitative extraction of pertechnetate into organic phase has been achieved.