Heterodinuclear Mg(II)M(II) (M=Cr,Mn, Fe,Co, Ni,Cu and Zn) Complexes for the Ring Opening Copolymerization of Carbon Dioxide/Epoxide and Anhydride/Epoxide

The catalysed ring opening copolymerizations (ROCOP) of carbon dioxide/epoxide or anhydride/epoxide are controlled polymerizations that access useful polycarbonates and polyesters. Here, a systematic investigation of a series of heterodinuclear Mg(II)M(II) complexes reveals which metal combinations are most effective. The complexes combine different first row transition metals (M(II)) from Cr(II) to Zn(II), with Mg(II); all complexes are coordinated by the same macrocyclic ancillary ligand and by two acetate co-ligands. The complex syntheses and characterization data, as well as the polymerization data, for both carbon dioxide/cyclohexene oxide (CHO) and endo-norbornene anhydride (NA)/cyclohexene oxide, are reported. The fastest catalyst for both polymerizations is Mg(II)Co(II) which shows propagation rate constants (k_p) of 34.7 mM⁻¹ s⁻¹ (CO₂) and 75.3 mM⁻¹ s⁻¹ (NA) (100 °C). The Mg(II)Fe(II) catalyst also shows excellent performances with equivalent rates for CO₂/CHO ROCOP (k_p=34.7 mM⁻¹ s⁻¹) and may be preferable in terms of metallic abundance, low cost and low toxicity. Polymerization kinetics analyses reveal that the two lead catalysts show overall second order rate laws, with zeroth order dependencies in CO₂ or anhydride concentrations and first order dependencies in both catalyst and epoxide concentrations. Compared to the homodinuclear Mg(II)Mg(II) complex, nearly all the transition metal heterodinuclear complexes show synergic rate enhancements whilst maintaining high selectivity and polymerization control. These findings are relevant to the future design and optimization of copolymerization catalysts and should stimulate broader investigations of synergic heterodinuclear main group/transition metal catalysts.     

Synthesis and spectral studies of pyranone derivative and its Cu(II), Co(II), Ni(II) and Zn(II) complexes

Under the thermolysis condition, 5-phenyl-2,3-dihydro-2,3-furandione (IV) in inert aprotic solvents as p-xylene at 130–140°C yields 3-benzoyl-4-hydroxy-6-phenyl-2H-pyran-2-one (VI) via phenyl ketene (V). The compound (VI) was converted into the corresponding 3-benzoyl-4-hydroxy-6-phenylpyridin-2(1H)-one (VII), and 3-benzoyl-2-oxo-6-phenyl-2H-pyran-4-yl acetate (VIII), by its reactions with ammonium hydroxyde, and acetic anhydride, respectively. On the other hand, a series of new various metal complexes (IX-XIa, XIb) of VI was synthesized. The results suggest that the compound VI as bidentate ligand indicate a binuclear structure for the Cu(II) complex with square-planar geometry. The Ni(II) and Zn(II) complexes are of tetrahedral and the Co(II) complex is also octahedral geometry with water molecules at the axial positions. The structures of compounds and complexes were characterized on the basis of elemental analysis, Mass, IR, ¹H, and ¹³C NMR spectra. The text was submitted by the authors in English.     

Structure of poly(maleic anhydride)

The bulk polymerization of maleic anhydride initiated with acylperoxides, di-tert-butyl peroxide, AIBN, or pyridine proceeds with evolution of CO₂. The amount of CO₂ generated depends on the nature and the concentration of the initiator. With peroxide initiators, less than 5% of the polymerized maleic anhydride is decarboxylated. ¹H-NMR spectra, obtained on the benzoyl peroxide-initiated polymer and its methyl ester, are consistent with the unrearranged poly(maleic anhydride) structure and rule out the polycyclopentanone structure proposed by Braun and co-workers. Base-initiated polymaleic anhydride is substantially decarboxylated, and the resulting polymer has anhydride and carboxyl groups. Elemental analyses and ¹H-NMR spectra obtained on the pyridine-initiated polymer and its methyl ester refute both the cis-poly(vinylene ketoanhydride) structure suggested by Schopov and the polycylopentanone structure proposed by Braun and co-workers.     

Aliphatic polyimides from phenylene bis(succinic anhydride) and bis(glutaric anhydride)

Meta and para derivatives of phenylene bis(succinic anhydride) and bis(glutaric anhydride) were obtained from 1,3- and 1,4-bis(β-cyano-β-carbethoxyvinyl)benzene with potassium cyanide or Meldrum acid followed by hydrolysis with concentrated hydrochloric acid and dehydration with acetic anhydride. Aliphatic polyimides were prepared from these anhydrides with six aromatic diamines through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimides was examined by thermogravimetric analysis.     

Synthesis and properties of poly(ether imide)s based on the bis(ether anhydride)s from hydroquinone and its derivatives

Four bis(ether anhydride)s, 4,4′‐(1,4‐phenylenedioxy)diphthalic anhydride (IV), 4,4′‐(2,5‐tolylenedioxy)‐diphthalic anhydride (Me‐IV), 4,4′‐(2‐chloro‐1,4‐phenylenedioxy)diphthalic anhydride (Cl‐IV), and 4,4′‐(2,5‐biphenylenedioxy)diphthalic anhydride (Ph‐IV), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 4‐nitrophthalonitrile with the potassium phenoxides of hydroquinone and various substituted hydroquinones such as methylhydroquinone, chlorohydroquinone, and phenylhydroquinone in N,N‐dimethylformamide, followed by alkaline hydrolysis and dehydration. Four series of poly(ether imide)s were prepared from bis(ether anhydride)s with various aromatic diamines by a classical two‐step procedure. The inherent viscosities of the intermediate poly(amic acid)s were in the range of 0.40–2.63 dL/g. Except for those derived from p‐phenylenediamine and benzidine, almost all the poly(amic acid)s could be solution‐cast and thermally converted into transparent, flexible, and tough polyimide films. Introduction of the chloro or phenyl substituent leads to a decreased crystallinity and an increased solubility of the polymers. The glass transition temperatures (T_g) of these polyimides were recorded in the range of 204–263°C. In general, the methyl‐ and chloro‐substituted polyimides exhibited relatively higher T_gs, whereas the phenyl‐substituted ones exhibited slightly lower T_gs compared to the corresponding nonsubstituted ones. Thermogravimetric analysis (TG) showed that 10% weight loss temperatures of all the polymers were above 500°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 665–675, 1999     

Novel trinuclear palladium(0) complexes; tris(tribenzylideneacetylacetone) tripalladium(solvent) complexes and their reactions

In an extension of our studies on palladium(0)dibenzylideneacetone complexes, novel trinuclear palladium complexes with three molecules of tribenzylideneacetylacetone have been obtained and identified by elemental and spectroscopic analyses (IR, UV and NMR).Ligand exchange reactions, oxidative addition reactions and complex formation reaction with maleic anhydride, dimethyl acetylenedicarboxylate and para-quinones were investigated. These were found to be similar to those of palladium (0)dibenzylideneacetone complexes.     

Curing reaction of unsaturated (epoxy) polyesters based on different aliphatic glycols

The influence of the structure of succinic or glutaric anhydride modified linear unsaturated (epoxy) polyesters on the course of the cure reaction with styrene initiated by benzoyl peroxide (BPO) or the mixture of benzoyl peroxide/tetrahydrophthalic anhydride (BPO/THPA) or benzoyl peroxide/maleic anhydride, as well as viscoelastic properties and thermal behavior of their styrene copolymers have been studied by DSC, DMA, and TGA analyses. Additionally, mechanical properties: flexural properties using three-point bending test and Brinell’s hardness for studied copolymers were evaluated. It was confirmed that the structure of used polyesters had a considerable influence on the course of the cure reaction with styrene, viscoelastic, thermal, and mechanical properties of prepared styrene copolymers. Generally, one or two asymmetrical peaks for the cure reaction of succinic or glutaric anhydride modified linear unsaturated epoxy polyesters with styrene were observed. They were connected with various cure reaction, e.g., copolymerization of carbon–carbon double bonds of polyester with styrene, thermal curing of epoxy groups, polyaddition reaction of epoxy to anhydride groups in dependence of used curing system. In addition, only one asymmetrical, exothermic peak attributed to the copolymerization process of succinic or glutaric anhydride modified linear unsaturated polyesters with styrene was visible. Moreover, the obtained styrene copolymers based on succinic or glutaric anhydride modified linear unsaturated epoxy polyesters were characterized by higher values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but lower ε − F _max compared to those values observed for styrene copolymers prepared in the presence of succinic or glutaric anhydride modified linear unsaturated polyesters. This supported to the production of stiffer and more thermally stable polymeric structure of copolymers based on unsaturated epoxy polyesters. Moreover, the copolymers prepared in the use of glutaric anhydride modified linear unsaturated (epoxy) polyesters were described by lower values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but higher ε − F _max than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters. The presence of longer aliphatic chain length in polyester’s structure leads to produce more flexible network structure of styrene copolymers based on glutaric anhydride modified linear unsaturated (epoxy) polyesters than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters.     

Stereoselective Formation of Ternary Copper(II) Complexes of (S)-Amino-acid Amides and (R)- or (S)-Histidine and (R)- or (S)-Tyrosine in Aqueous Solution

Formation constants of ternary complexes of Cu^II with (S)-amino-acid amides ((S)-phenylalaninamide, (S)-prolinamide, and (S)-tryptophanamide) and (R)- or (S)-histidine and (R)- or (S)-tyrosine were determined potentiometrically in aqueous solution. Significant stereoselectivity was presented by all three amides towards histidine, the diastereoisomeric complexes with ‘heterochiral’ ligands being more stable than those with ‘homochiral’ ligands (see Table 3). The stereoselectivity observed with (S)-phenylalaninamide and (S)-tryptophanamide may be explained on the basis of hydrophobic stacking interactions between 1H-imidazole and the aromatic side chain, favoured by the terdentate behaviour of histidine (see Fig.2), whereas repulsive effects seem to be prevalent with (S)-prolinamide. Only (S)-prolinamide and (S)-phenylalaninamide show appreciable stereoselectivity with tyrosine, which is bidentate, probably on account of repulsive interactions. The present results on the stability of ternary complexes in solution allow to draw some conclusions on the mechanism of chiral discrimination performed by Cu^II complexes of (S)-amino-acid amides added to the mobile phase in HPLC (reversed phase).     

Synthesis and characterization of cobalt(II) and zinc(II) complexes of poly(3-nitrobenzyli dene-1-naphthylamine-co-succinic anhydride)

The cobalt(II) and zinc(II) complexes of poly(3-nitrobenzylidene-1-naphthylamine-co-succinic anhydride) were synthesized by the reaction of THF solution of the alternating copolymer with aqueous solution of cobalt(II) and zinc(II) acetates. The metal complexes were characterized by elemental analysis, magnetic measurements, IR, UV–Vis. and ¹H NMR spectral studies. The elemental analysis of the metal polymer complexes suggests that the metal to ligand ratio is 1:2. Conductance measurements indicate the non electrolytic nature of both the complexes. Electronic spectrum and magnetic moment studies are taken into account for the geometry of cobalt complex. Thermal analysis data of the two metal–polymer complexes were reported. XRD data revealed the nanocrystalline nature of both the complexes. The SEM studies give the surface morphology of the complexes.     

The thermal decomposition of peroxyacetic nitric anhydride (PAN) and peroxymethacrylic nitric anhydride (MPAN)

The rate coefficients of thermal decomposition of peroxyacetic nitric anhydride (PAN) and peroxymethacrylic nitric anhydride (MPAN) were measured over the temperature range 302–323 K. The resulting Arrhenius expressions were k = 10^17.4±0.4 exp(?28.5 ± 0.5/RT) for PAN, and k = 10^16.2±0.7 exp(?26.8 ± 1.0/RT) for MPAN, where the activation energy is in Kcal/mol. These results are in good agreement with previous studies of PAN and other PAN-type compounds, and imply that energies of RC(O)OO? NO₂ bonds are relatively independent of the nature of R.     

Synthesis and antitumor properties of new platinum(IV) complexes with aminonitroxyl radicals

Acylation of cis,trans,cis-Pt^IV(RNH₂)(NH₃)(OH)₂Cl₂ with acetic anhydride afforded complexes cis,trans,cis-Pt^IV(RNH₂)(NH₃)(OAc)₂Cl₂, where R is 2,2,6,6-tetramethyl-1-oxylpiperidin-4-yl (1b) or 2,2,5,5-tetramethyl-1-oxylpyrrolidin-3-yl (2b). The complexes were characterized by elemental analysis, HPLC, and IR, UV, and ESR spectra. Complex 1b exhibits high antitumor activity comparable with that of Cisplatin against leukemia P388 used as the experimental tumor. Simultaneous administration of low doses of 1b and Cisplatin (1/20 of LD₅₀ each) results in synergism of the antitumor activity and 100% cure of animals. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 60–63, January, 2006.     

Schiff-Basen aus 1,3-Dicarbonylverbindungen und Triaminen und ihre Fe (III)-, Co (III)-, Ni(II)- und Cu(II)-Komplexe

Schiff bases of 1,3-dicarbonyl compounds with triamines and their Fe(III), Co(III), Ni(II) and Cu(II) complexes The preparation of new hexadentate ligands obtained by the reaction of cis, cis-1,3,5-triaminocyclohexane (tach) or 1,1,1-tris (aminomethyl)ethane (tame) with an 2-ethoxymethylidene-1,3-dicarbonyl compound as well as their Fe(III), Co(III), Ni(II) and Cu(II) complexes is reported. Fe(III) and Co(III) yield neutral complexes with an octahedral N₃O₃-coordination sphere, Ni(II) and Cu(II) complexes with a square-planar coordination-sphere. In the later complexes one of the bidentate branches of the ligand is not deprotonated and stays uncoordinated.     

Zirconium(IV) Thorium(IV) and Dioxouranium(VI) Complexes of Salicylidene o-Aminobenzothiol

Salicylidene-o-aminobenzothiol and its 5-chloro and 5-bromo derivatives, dibasic tridentate Schiff bases, dervied from the condensation of o-aminothiol and Salicylaldehyde, 5-chloro salicylaldehyde and 5-bromo salicylaldehyde, were used for coordination with Zr(IV), Th(IV) and UO₂(VI) metal inos. The I:I (metal-ligand) stoichiometry of these complexes is shown by elemental analysis and conductometric titrations. Molecular structure of these complexes are proved by Infra-red spectroscopy and thermogravimetric analysis. Magnetic susceptibility measurements of Zr(IV), Th(IV) and UO₂(VI) complexes show their diamagnetic and octahedral geometry. Results show that all the complexes have solvent molecules in coordination with metal ion.     

Supercritical carbon dioxide assisted synthesis of amphiphilic graft copolymers based on poly(styrene-co-maleic anhydride) with methoxyl poly(ethylene glycol) side chains

Supercritical carbon dioxide（scCO₂） was used as a reaction medium in synthesizing amphiphilic graft copolymers composed of poly（styrene-co-maleic anhydride）（SMA） backbones and methoxyl poly（ethylene glycol）（MPEG） side chains via esterification.The synthesized copolymers were characterized by Fourier transform infrared spectroscopy（FTIR）,gel permeation chromatography（GPC）,¹H-NMR,thermo-gravimetric analysis（TGA） and differential scanning calorimetric analysis（DSC）.The gelation phenomenon was suppressed effectively by tuning reaction conditions.The influences of scCO₂ temperature and pressure on the conversion of anhydride were investigated.It was found that the highest conversion ratio occurred at 80℃under a constant pressure of 14 MPa or 26 MPa.With the increase of scCO₂ pressure,the conversion ratio increased first,and then leveled off.The conversion ratio of anhydride could be controlled by regulating the reaction conditions.It was also revealed that using low molecular weight MPEG brought a high conversion ratio of anhydride.     

The chemistry of 2H-3,1-benzoxazine-2,4(1H)-dione (isatoic anhydride). 9. Synthesis of 2-arylquinoline alkaloids

A one-step synthesis of N-methyl-2-aryl-4-quinolone alkaloids is described. These compounds are readily prepared from the reaction of an N-methylisatoic anhydride with the lithium enolate of an acetophenone. By this method, the reaction of N-methylisatoic anhydride ( 5 ) or 5-methoxy-N-methylisatoic anhydride ( 7 ) with acetophenone produces the alkaloids N-methyl-2-phenyl-4-quinolone ( 1 ) and eduline ( 2 ) in 81% and 70% yield, respectively. An analogous reaction of 5 with 3,4-methylenedioxyacetophenone gives graveoline ( 3 ) in 63% yield whereas 7 and α-methoxyacetophenone affords japonine ( 4 ) in 61% yield.     

Spectroscopic studies of the electron donor-acceptor interactions of aromatic hydrocarbons with tetrachlorophthalic anhydride

Electron donor-acceptor (EDA) interactions of tetrachlorophthalic anhydride (TCPA) with benzene,p-xylene, mesitylene, fluorene,t-stilbene and pyrene have been investigated by spectroscopic technique. The spectroscopic and thermodynamic parameters of the complexes formed are reported. The enthalpies of formation range between 0.2 to 5.0 kcal mole⁻¹. Among all the donors studied, pyrene appears to be the strongest electron donor towards tetrachlorophthalic anhydride.     

FORMATION EQUILIBRIA OF COPPER(II) TERNARY COMPLEXES WITH (S)-LEUCINEHYDROXAMIC ACID AND (R)- OR (S)-AMINO ACIDS IN AQUEOUS SOLUTION

Abstract

Solution equilibria of binary copper(II) complexes with (S)-leucinehydroxamic acid and of ternary complexes with (R)- or (S)-amino acids (valine, proline, phenylalanine, tryptophan) were studied by potentiometry and electronic spectrophotometry at T=25°C and I= 0.5moldm^?3 (KCl). The mixed species [CuLA] and [CuLH-^IA]^? (L^?=leucinehydroxamate, A^?= aminoacidate), do not present stereoselectivity, but are strongly stabilized with respect to their parent binary complexes. Possible structures of the ternary complexes are proposed.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

Synthesis of Poly(Adipic Anhydride) by Use of Ketene

Polyadipic anhydrides were prepared (a) from the mixed anhydride of adipic acid and acetic acid, (b) from the mixed anhydride of adipic acid and ketene in tetrahydrofurane solution (0°C), (c) by melt polycondensation of adipic acid with ketene, and (d) from the seven-membered ring adipic anhydride. The polymers were characterized by means of NMR, IR, DSC, and GPC. The polymer with the highest melting temperature was obtained by melt polycondensation of adipic acid with ketene (T _peak 76°C). The heat of fusion was approximately 40 J/g in all four methods. The number-average and weight-average molecular weights of the polyanhydrides were 2000 and 3000, respectively.     

bis(nicotinamide) and bis(N,N-diethyl nicotinamide) p-hydroxybenzoate complexes of Ni(II), Cu(II) AND Zn(II)

The mixed-ligand p-hydroxybenzoate complexes of Ni(II), Cu(II) and Zn(II) with nicotinamide and N,N-diethylnicotinamide were synthesized and characterized by elemental analysis, magnetic susceptibility measurements and mass spectrometry. The thermal behavior of the complexes was studied by simultaneous TG, DTG and DTA methods in static air atmosphere. The infrared spectral characteristics of the complexes are also discussed. The complexes contain two water molecules, two p-hydroxybenzoato (p-hba) and two nicotinamide (na) (or diethylnicotinamide (dena)) ligands per formula unit. In these complexes, all ligands are coordinated to the metal ion as monodendate ligands. In Zn(II)-na and Cu(II)-dena complexes, thep-hydroxybenzoate behaves as bidentate chelating ligand through carboxylic oxygen atoms. The decomposition pathways and the stability of the complexes are interpreted in the terms of the structural data. The final decomposition products were found to be the respective metal oxides. This revised version was published online in July 2006 with corrections to the Cover Date.