Casimir force pressure on the insulating layer in metal-insulator-semiconductor structures

The Casimir force pressure on the insulating layer in metal-insulator-semiconductor structures with parameters close to those used in the production of semiconductor devices has been calculated. It has been shown that the Casimir force pressure increases tenfold and reaches several tens of pascals as the insulator thickness decreases from 80 to 40 nm. The metal layer thickness and the presence of the surface layer with a high charge carrier concentration in the semiconductor have a slight effect on calculated values of the Casimir pressure.     

Experimental investigation of the Casimir force beyond the proximity-force approximation

The analysis of all Casimir force experiments using a sphere-plate geometry requires the use of the proximity-force approximation (PFA) to relate the Casimir force between a sphere and a flat plate to the Casimir energy between two parallel plates. Because it has been difficult to assess the PFA's range of applicability theoretically, we have conducted an experimental search for corrections to the PFA by measuring the Casimir force and force gradient between a gold-coated plate and five gold-coated spheres with different radii using a microelectromechanical torsion oscillator. For separations z<300 nm, we find that the magnitude of the fractional deviation from the PFA in the force gradient measurement is, at the 95% confidence level, less than 0.4z/R, where R is the radius of the sphere.     

Experiment and theory in the Casimir effect

Casimir effect is the attractive force which acts between two plane parallel, closely spaced, uncharged, metallic plates in vacuum. This phenomenon was predicted theoretically in 1948 and reliably investigated experimentally only in recent years. In fact, the Casimir force is similar to the familiar van der Waals force in the case of relatively large separations when the relativistic effects come into play. We review the most important experiments on measuring the Casimir force by means of torsion pendulum, atomic force microscope and micromechanical torsional oscillator. Special attention is paid to the puzzle of the thermal Casimir force, i.e. to the apparent violation of the third law of thermodynamics when the Lifshitz theory of dispersion forces is applied to real metals. Thereafter we discuss the role of the Casimir force in nanosystems including the stiction phenomenon, actuators, and interaction of hydrogen atoms with carbon nanotubes. The applications of the Casimir effect for constraining predictions of extra-dimensional unification schemes and other physics beyond the standard model are also considered.     

Casimir Effect at Finite Temperature in the Presence of One Fractal Extra Compactified Dimension

We discuss the Casimir effect for massless scalar fields subject to the Dirichlet boundary conditions on the parallel plates at finite temperature in the presence of one fractal extra compactified dimension. We obtain the Casimir energy density with the help of the regularization of multiple zeta function with one arbitrary exponent and further the renormalized Casimir energy density involving the thermal corrections. It is found that when the temperature is sufficiently high, the sign of the Casimir energy remains negative no matter how great the scale dimension δ is within its allowed region. We derive and calculate the Casimir force between the parallel plates affected by the fractal additional compactified dimension and surrounding temperature. The stronger thermal influence leads the force to be stronger. The nature of the Casimir force keeps attractive.     

Effect of the electric current on the Casimir force between graphene sheets

The dependence of the thermal component of the Casimir force and Casimir friction between graphene sheets on the drift velocity of charge carriers in one of the sheets has been analyzed. It has been shown that the drift motion results in the measurable change in the thermal Casimir force owing to the Doppler effect. The thermal Casimir force, as well as Casimir friction, increases strongly in the case of resonant photon tunneling, when the energy of an emitted photon coincides with the excitation energy of an electron-hole pair. In the case of resonant photon tunneling, the dominant contribution to the Casimir friction even at temperatures above room temperature comes from quantum friction caused by quantum fluctuations. Quantum friction can be detected in an experiment on the friction drag between graphene sheets in a high electric field.     

The Casimir Effect for Parallel Plates in the Spacetime with a Fractal Extra Compactified Dimension

The Casimir effect for massless scalar fields satisfying Dirichlet boundary conditions on the parallel plates in the presence of one fractal extra compactified dimension is analyzed. We obtain the Casimir energy density by means of the regularization of multiple zeta function with one arbitrary exponent. We find a limit on the scale dimension like $\delta>\frac{1}{2}$ to keep the negative sign of the renormalized Casimir energy which is the difference between the regularized energy for two parallel plates and the one with no plates. We derive and calculate the Casimir force relating to the influence from the fractal additional compactified dimension between the parallel plates. The larger scale dimension leads to the greater revision on the original Casimir force. The two kinds of curves of Casimir force in the case of integer-numbered extra compactified dimension or fractal one are not superposition, which means that the Casimir force show whether the dimensionality of additional compactified space is integer or fraction.     

Optical detection of the Casimir force between macroscopic objects

We report the optical detection of mechanical deformation of a macroscopic object induced by the Casimir force. An adaptive holographic interferometer based on a photorefractive BaTiO3:Co crystal was used to measure periodical nonlinear deformations of a thin pellicle caused by an oscillating Casimir force. A reasonable agreement between the experimental and calculated values of the first and second harmonics of the Casimir force oscillations has been obtained.     

The role of the “Casimir force analogue” at the microscopic processes of crystallization and melting

Melting (crystallization), a phase transition from a crystalline solid to a liquid state, is a common phenomenon in nature. We suggest a new factor, “the Casimir force analogue”, to describe mechanisms of melting and crystallization. The Casimir force analogue is a force occurring between the surfaces of solid and liquid phases of metals caused by different energy density of phonons of these phases. It explains abrupt changes in geometry and thermodynamic parameters at a melting point. “The Casimir force analogue” helps to estimate latent melting heat and to gain an insight into a solid–liquid transition problem.     

On a theory of the Casimir effect

We develop a mathematically precise framework for the Casimir effect. A major role is played by Dietz's idea of identifying the Casimir energy as the regularization-independent Ramanujan sum of an asymptotic series. As an illustration, we treat two cases: parallel plates and the sphere. We finally discuss the open problem of the Casimir force for the cube. We propose an Ansatz for the exterior force and argue why it may provide the exact solution, as well as an explanation of the repulsive sign of the force.     

卡西米尔力

量子电动力学中的卡西米尔力是真空零点能的体现.广义的卡西米尔力则依赖于涨落介质的类型广泛地出现于物理中,包括量子,临界,戈德斯通模,以及非平衡卡西米尔力.长程关联的涨落介质和约束是产生卡西米尔力的两个条件.本文通过回顾卡西米尔物理的发展,讨论了不同类型的卡西米尔力,几种正规化方法,并对卡西米尔物理的进一步发展做了展望.     

Long-range magnetic interaction due to the Casimir effect

The zero-point quantum fluctuations of the electromagnetic field in vacuum are known to give rise to a long-range attractive force between metal plates (Casimir effect). For ferromagnetic layers separated by vacuum, it is shown that the interplay of the Casimir effect and of the magneto-optical Kerr effect gives rise to a long-range magnetic interaction. The Casimir magnetic force is found to decay as D-1 in the limit of short distances, and as D-5 in the limit of long distances. Explicit expressions for realistic systems are given in the large- and small-distance limits. An experimental test of the Casimir magnetic interaction is proposed.     

The Casimir force on a piston in the spacetime with extra compactified dimensions

A Casimir piston for massless scalar fields obeying Dirichlet boundary conditions in high-dimensional spacetimes within the frame of Kaluza–Klein theory is analyzed. We derive and calculate the exact expression for the Casimir force on the piston. We also compute the Casimir force in the limit that one outer plate is moved to the extremely distant place to show that the reduced force is associated with the properties of additional spatial dimensions. The more dimensionality the spacetime has, the stronger the extra-dimension influence is. The Casimir force for the piston in the model including a third plate under the background with extra compactified dimensions always keeps attractive. Further we find that when the limit is taken the Casimir force between one plate and the piston will change to be the same form as the corresponding force for the standard system consisting of two parallel plates in the four-dimensional spacetimes if the ratio of the plate-piston distance and extra dimensions size is large enough.     

The asymptotic behavior of Casimir force in the presence of compactified universal extra dimensions

The Casimir effect for parallel plates in the presence of compactified universal extra dimensions within the frame of Kaluza–Klein theory is analyzed. Having regularized and discussed the expressions of Casimir force in the limit, we show that the nature of Casimir force is repulsive if the distance between the plates is large enough and the higher-dimensional spacetime is, the greater the value of repulsive Casimir force between plates is. The repulsive nature of the force is not consistent with the experimental phenomena.     

Casimir force with the inclusion of a finite thickness of interacting plates

The Casimir force between two thin metal films is calculated with allowance made for a finite thickness of the films and a finite plasma frequency. The conditions are determined under which the Casimir force in the films can be weakened considerably (by at least one order of magnitude) as compared to massive metal plates. A comparison with the available experimental data is performed and the conclusion is drawn that the observed values of the Casimir force for the films can be explained in terms of the existing theory under the assumption that the wavelength of plasma oscillations in real films is larger than 1000 nm.     

Finite-temperature Casimir effect in piston geometry and its classical limit

We consider the Casimir force acting on a d-dimensional rectangular piston due to a massless scalar field with periodic, Dirichlet and Neumann boundary conditions and an electromagnetic field with perfect electric-conductor and perfect magnetic-conductor boundary conditions. The Casimir energy in a rectangular cavity is derived using the cut-off method. It is shown that the divergent part of the Casimir energy does not contribute to the Casimir force acting on the piston, thus renders an unambiguously defined Casimir force acting on the piston. At any temperature, it is found that the Casimir force acting on the piston increases from −∞ to 0 when the separation a between the piston and the opposite wall increases from 0 to ∞. This implies that the Casimir force is always an attractive force pulling the piston towards the closer wall, and the magnitude of the force gets larger as the separation a gets smaller. Explicit exact expressions for the Casimir force for small and large plate separations and for low and high temperatures are computed. The limits of the Casimir force acting on the piston when some pairs of transversal plates are large are also derived. An interesting result regarding the influence of temperature is that in contrast to the conventional result that the leading term of the Casimir force acting on a wall of a rectangular cavity at high temperature is the Stefan–Boltzmann (or black-body radiation) term which is of order T ^d+1, it is found that the contributions of this term from the two regions separating the piston cancel with each other in the case of piston. The high-temperature leading-order term of the Casimir force acting on the piston is of order T, which shows that the Casimir force has a nontrivial classical ℏ→0 limit. Explicit formulas for the classical limit are computed.     

Repulsive and attractive Casimir forces between magnetodielectric slabs

The Casimir force between two parallel magnetodielectric slabs is investigated by means of Casimir–Lifshitz Theory. For two magnetodielectric slabs, one is permittivity-negative, while the other is permeability-negative in the real frequency space. Numerical results show that when the separation between these two slabs is small (or large), the Casimir force is repulsive, while for the intermediate separation, the Casimir force is attractive. As a consequence, there are two equilibria with zero Casimir force, and a repulsive–attractive–repulsive transition takes place with increasing the separation. Therefore, if the separation between two interacting slabs is manipulated in the small (or large) separation region, it is possible to overcome the stiction in micromechanical and nanomechanical systems.     

Modulation of the Casimir force by laser pulses: Influence of oxide films on the silicon surface

The possibility of modulating the Casimir force that acts in an air medium between a gold sphere and a silicon plate irradiated by laser pulses has been studied. It has been demonstrated that the oxide film that is formed on the silicon surface in air hardly affects the possibility of modulating the Casimir force when the distances between interacting bodies are of the order of 100 nm. With an increase in the distance, the modulation depth decreases; however, this region is of less practical interest, because the Casimir forces become too weak.     

Casimir force measurement using dynamic holography

The first holographic measurements are reported of the force between macroscopic objects mediated by zero-point electromagnetic fluctuations (Casimir force). A holographic interferometer is used to measure mirror oscillations with an amplitude of 1 pm. The objects under study are two thin metal films deposited on dielectric substrates. When one film is periodically oscillated, the first and second harmonics of the Casimir force acting on the other are detected. For the first time, an order-of-magnitude estimate is obtained for the Casimir force by using radiation pressure as a natural reference scale. The discrepancy between calculated and measured values of the Casimir force may be attributed to the small thickness and low conductivity of the metal films.     

On the Relation Between Casimir Forces and Bulk Correlations

Within a microscopic approach we show that in the case of an ideal quantum gas enclosed in a slit the Casimir force can be simply expressed in terms of the bulk one-particle density matrix. The corresponding formula, which holds both for bosons and fermions, allows to relate the range of the Casimir force to the bulk correlation length. The low-temperature behavior of the Casimir forces is derived.     

Frequency map analysis of the 3D vibrational dynamics of the LiCN/LiNC molecular system

The Casimir effect is a force arising in the macroscopic world as a result of radiation pressure of vacuum fluctuations. It thus plays a key role in the emerging domain of nano-electro-mechanical systems (NEMS). This role is reviewed in the present paper, with discussions of the influence of the material properties of the mirrors, as well as the geometry dependence of the Casimir effect between corrugated mirrors. In particular, the lateral component of the Casimir force and restoring torque between metal plates with misaligned corrugations are evaluated.