MXene/枝状Co/聚偏氟乙烯复合光热膜制备及其界面蒸发性能

使用湿法刻蚀方式将Ti₃AlC₂刻蚀剥离成单/少层Ti₃C₂T_x MXene纳米片,采用电化学还原法制备枝状Co,然后以亲水的聚偏氟乙烯(PVDF)膜为基底通过真空抽滤制备Ti₃C₂T_x/枝状Co/PVDF复合光热膜。对复合材料的结构和形貌进行表征,研究了复合光热膜的光吸收性能和界面蒸发性能。结果表明,在模拟1个太阳光照下(光照强度为1 kW·m^-2),Ti₃C₂T_x/枝状Co/PVDF复合光热膜的光吸收率达到95.3%,纯水蒸发速率达到1.78 kg·m^-2·h^-1,界面蒸发效率高达97.5%。此外,还测试了在模拟海水中的界面蒸发性能,蒸发冷凝得到的水达到世界卫生组织(WHO)和美国环境保护署(EPA)饮用水标准,蒸发速率达到1.61 kg·m^-2·h     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

二氧化硅/木质素多孔碳复合材料的制备及作为锂离子电池负极材料的性能

将来源于造纸黑液中的碱木质素(AL)通过水热反应与纳米二氧化硅(SiO_2)复合,制备了二氧化硅/季铵化碱木质素复合物(SiO_2/QAL),再经过碳化和酸洗后得到二氧化硅/木质素多孔碳复合材料(SiO_2/PLC).形貌与结构表征结果表明,SiO_2/PLC的比表面积达到1069 m~2/g,具有平均孔径约20 nm的介孔结构.二氧化硅纳米颗粒均匀分散在三维网络结构的木质素多孔碳内部.电化学性能测试结果表明,SiO_2/PLC作为锂离子电池负极材料具有良好的倍率性能和循环性能,在100 mA/g电流密度下经过100周循环后放电比容量为820 mA·h/g,在5 A/g大电流密度下嵌锂容量达到235 mA·h/g.     

Pt/ZSM-35/MCM-49催化剂上H2选择还原NO

将共结晶分子筛作为催化剂载体应用于富氧条件下的氮氧化物消除反应.在体积分数为0.1%NO,0.5%H2,6.7%O2,He气为平衡气,反应空速8×104h-1条件下对比考察了Pt/ZSM-35/MCM-49,Pt/ZSM-35和Pt/MCM-49催化剂在氢气选择催化还原氮氧化物反应中的活性.结果表明,Pt/ZSM-35/MCM-49催化剂上的活性较其它2个催化剂有一定程度的提高,NO转化率最高达到84%,N2选择性最高达到74%.通过X射线衍射(XRD)、氨气程序升温脱附(NH3-TPD)、氢气程序升温还原(H2-TPR)、CO吸附红外和原位漫反射红外对3种催化剂进行了表征.结果发现,Pt/ZSM-35/MCM-49催化剂活性的提高源于共结晶有利于生成和稳定重要的中间物种——氨物种.     

铁酸锰/腐植酸复合材料制备及其对亚甲基蓝吸附性能

采用化学共沉淀法合成了一种腐植酸(Humic Acid,HA)包覆铁酸锰型磁性复合材料(MnFe₂O₄/HA)。采用扫描电子显微镜(SEM)、粉末X射线衍射(XRD)和傅里叶变换红外光谱(FT-IR)等技术手段对其进行表征和分析表明,合成产物颗粒大小约200 nm,具有典型的尖晶石结构,腐植酸成功包覆在MnFe₂O₄颗粒表面,饱和磁化强度为34.01 A·m²/kg,在外界低磁场作用下30 s内便可从水溶液分离。 MnFe₂O₄/HA对亚甲基蓝的吸附是一个准二级动力学过程,在2 h达到平衡,较好的符合Langmuir吸附模型。 与MnFe₂O₄相比其对亚甲基蓝的吸附能力显著增强,室温下pH=9时最大吸附量可以达到29.94 mg/g。 MnFe₂O₄/HA可以作为一种有效去除水体中亚甲基蓝污染物的吸附材料。     

席夫碱铁-TiO2复合物光催化降解有毒有机污染物

运用化学合成方法制备了双(5-磺酸钠水杨醛)邻苯二胺席夫碱[N,N -Bis-schiff-base-5-sulfonate-salicylalidene- o-phenylenediamine sodium, SSPA]铁(III)配合物(FeSSPA), 采用无机钛盐醇解法制备了席夫碱铁-TiO₂复合物催化剂(FeSSPA-TiO₂). 通过紫外-可见反射光谱(UV-Vis DRS)、透射电镜(TEM)对制备催化剂进行了表征. 利用FeSSPA-TiO₂可见光(λ＞420 nm)激发活化分子氧降解有机染料罗丹明B (Rhodamine B, RhB)、无色小分子2,4-二氯苯酚(2,4-Dichlorophenol, 2,4-DCP)及水杨酸(Salicylic acid, SA), 研究了FeSSPA-TiO₂的光催化性能. 结果表明, FeSSPA-TiO₂光催化剂在pH 6.7, 可见光照射条件下, 80 min RhB褪色率达到100%, 20 h小分子2,4-DCP, SA的降解率分别达到67%, 100%. 在实验条件下, 33 h对RhB矿化率达到70.5%. 通过反应过程中氧化物种的测定, 发现降解过程主要涉及超氧自由基( )的氧化机理.     

可见光/Fenton光催化降解有机染料

采用Fenton试剂(Fe³⁺/H₂O₂)在可见光条件下(λ＞450nm)光催化降解目标染料化合物罗丹明B(RhodamineB,RhB).在pH＜3.0体系中用可见光照射,能使RhB染料在光敏化作用下有效降解,反应160min后矿化率达到71.8%.采用ESR和溴甲酚绿(Bromocresolgreen,BCG)法跟踪测定活性氧化物种,通过对RhB降解过程的紫外-可见光谱、红外光谱分析及总有机碳量(TOC)跟踪测定,结果表明,Fe³⁺/H₂O₂/RhB体系在可见光照射下主要的活性氧化物种为羟基自由基,能有效地降解RhB.     

4-二苯胺基苯甲醇功能化石墨烯的制备、电子传递及光催化性能

在碱性条件下由氧化石墨(GO)还原获得还原石墨烯(RGO). RGO与4-二苯胺基苯甲醇(TPACH₂OH)混合后发生相互作用, 得到功能化石墨烯复合物(TPACH₂OH-RGO). 采用密度泛函理论(DFT)对TPACH₂OH-RGO模拟计算结果表明, TPACH₂OH和RGO之间主要通过氢键作用形成复合物. 利用紫外-可见光谱(UV-vis)、拉曼光谱(Raman)、荧光光谱(Fluorescence)、原子力显微镜(AFM)、透射电子显微镜(TEM)和电化学等方法研究了TPACH₂OH-RGO结构和光电性质, 并研究了以TPACH₂OH-RGO为催化剂在光照射下光催化分解水制氢性能. 实验结果表明: 光照下复合物中激发态TPACH₂OH向RGO转移电子. 在TPACH₂OH和RGO的质量比为4/3, 体系pH＝6条件下, 光照6 h, TPACH₂OH-RGO的产氢总量达到35.0 μmol, 比RGO的产氢总量(20.4 mmol)有明显的提高.     

NF/rGO/Co_3O_4/NiO电极的制备及在超级电容器中的应用

以泡沫镍(NF)为集流体,在优化好的电位、时间和浓度下,将还原氧化石墨烯(rGO)、金属氧化物(Co_3O_4和NiO)直接生长在泡沫镍上,制备了NF/rGO/Co_3O_4和NF/rGO/Co_3O_4/NiO电极.运用三电极体系对电极材料进行了恒流充放电(GCD)和交流阻抗(EIS)等测试.结果表明,复合材料NF/rGO/Co_3O_4/NiO具有较高的比容量(电流密度为2 A/g时,比容量达到1188.6 F/g)和较好的循环稳定性(2000周充放电后,稳定性达到80.5%).该材料还具有较高的倍率性能,当电流密度由2 A/g增至12 A/g时,倍率性能仍能达到75.7%.     

高共轭性的四苯基卟啉-Ru(Ⅱ)联吡啶配合物的合成、光学性质及光动力抗癌活性

利用β位吡嗪环共轭连接的卟啉-菲咯啉配体L制备了两亲性的卟啉基-钌配合物PorRu和PorZn-Ru,对其进行了核磁及质谱的表征、线性与非线性光谱分析及光动力抗癌活性研究。实验结果显示所得的2个钌配合物具有高的¹O₂量子产率(0.93、0.82)和较高的双光子吸收截面(619、621 GM),鼻咽癌HK-1细胞株的摄取量可达每10⁶个细胞约22 nmol。体外光动力抗癌活性测试显示在2 J·cm^-2的光学剂量及4μmol·L^-1的给药浓度下,抑制效率分别达到(87.44±2.21)%、(45.03±2.85)%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.