Biomimetic and microbial reduction of nitric oxide

The biomimetic reduction of nitric oxide (NO) to nitrous oxide (N₂O) by dithiothreitol in the presence of cyanocobalamin and cobaltcentered porphyrins has been investigated. Reactions were monitored directly using Fourier Transform Infrared (FTIR) Spectroscopy vapor-phase spectra. Reaction rates were twofold faster for the corrin than for the cobalt-centered porphyrins. The stoichiometry showed the loss of two molecules of NO per molecule of N₂O produced. We have also demonstrated that the facultative anaerobe and chemoautotroph,Thiobacillus denitrificans, can be cultured anoxically in batch reactors using NO as a terminal electron acceptor with reduction to elemental nitrogen (N₂). We have proposed that the concentrated stream of NO_x, as obtained from certain regenerable processes for the gas desulfurization and NO_x removal, could be converted to N₂ for disposal by contact with a culture ofT. denitrificans. Four heterotrophic bacteria have also been identified that may be grown in batch cultures with succinate, yeast extract, or heat and alkali pretreated sewage sludge as carbon and energy sources and NO as a terminal electron acceptor. These areParacoccus dentrificans, Pseudomonas denitrificans, Alcaligens denitrificans, andThiophaera pantotropha.     

Reduction of nitric oxide to elemental nitrogen byThiobacillus Denitrificans

A need exists for new technology for the disposal of concentrated NO_x streams obtained from certain regenerable, dry scrubbing processes, such as the NOXSO process, and the removal and disposal of NO_x from more dilute gas streams produced by nitric acid plants. It has been demonstrated that the facultative anaerobe and autotroph, Thiobacillus denitrificans, may be cultured anaerobically in batch reactors using NO (g) as a terminal electron acceptor. Thiosulfate served as an energy source, CO₂ (g) as a carbon source, and ammonium ion as a source of reduced nitrogen. The growth of T.denitrificans was indicated by depletion of thiosulfate and ammonium ion and the accumulation of biomass. The feed gas consisted of 5000 ppmv NO, 5%, CO₂, and balance nitrogen. The NO concentration in the outlet gas was typically 200 ppmv.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO₂二元氧化物表面NO的NH₃催化还原反应的机理。研究了CrO-CeO₂二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程, 在SCR反应过程中分别切断NH₃和NO的气流, 并采集了所生成的原位漫反射红外光谱图, 通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从E-R机理。     

Nitrite formation in aerated aqueous azide solutions: A radiation chemical study

Gamma radiolysis of oxygenated 1–10 mM azide solutions was carried out at various pH values. In oxygenated 10 mM azide solutions, H₂O₂ and NO ₂ ⁻ were observed as radiolytic products while NH3 was not. The concentration of H₂O₂ reached its maximum level at a dose of 1 kGy, whereas NO ₂ ⁻ yield increased non-linearly beyond 2 kGy in this system. Both in aerated and oxygenated systems, G(NO ₂ ⁻ ) and G(H₂O₂) were found to vary with N ₃ ⁻ concentration. The yield of NO ₂ ⁻ was found to be dependent on both dose rate and pH. On pulse radiolysis, NO ₂ ⁻ was found as a radiolytic product in aerated 1 mM azide solution at pH 6.8. In this system the intermediate generated exhibits absorbance around 250 nm. The overall results obtained during the present study reveal that in presence of both reducing radical (mainly e _aq ⁻ ) and oxygen, N ₃ ⁻ produced an intermediate possibly NH₂O ₂ ^• radical, which is the prime source for NO ₂ ⁻ generation.     

Effect of strontium substitution on the activity of La2?xSrxNiO4 (x = 0.0–1.2) in NO decomposition

The aim of this work is to study the effect of Sr substitution on the redox properties and catalytic activity of La_2−x Sr _x NiO₄ (x = 0.0–1.2) for NO decomposition. Results suggest that the x = 0.6 sample shows the highest activity. The characterization (TPD, TPR, etc.) of samples indicates that the x = 0.6 sample possesses suitable abilities in both oxidation and reduction, which facilitates the proceeding of oxygen desorption and NO adsorption. At temperature below 700°C, the oxygen desorption is difficult, and is the rate-determining step of NO decomposition. With the increase of reaction temperature (T > 700°C), the oxygen desorption is favorable and, the active adsorption of NO on the active site (NO + V _o + Ni²⁺ → NO⁻-Ni³⁺) turns out to be the rate-determining step. The existence of oxygen vacancy is the prerequisite condition for NO decomposition, but its quantity does not relate much to the activity. Supported by the National Hi-Tech Research and Development Program of China (863 Program)(Grant No. 2004CB 719502) and the National Natural Science Foundation of China (Grant No. 20177022)     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Electrochemical reduction of NO on La2-x Sr x NiO4 based electrodes

The series La_2 − x Sr _x NiO₄ (x = 0.0, 0.05, 0.15, 0.25, 0.35, and 1.0) was tested for functionality as electrode materials for direct electrochemical reduction of NO. The materials were tested using cyclic voltammetry in 1% NO and 10% O₂ in Ar on a cone-shaped electrode. The best materials for the electrochemical reduction of NO are La₂NiO₄ and LaSrNiO₄, which have current densities for NO reduction 1.82 and 7.09 times higher, respectively, than for O₂ at 400 °C. Increasing the temperature decreased the ability to reduce NO before O₂ while the activity increased. The adsorbed species during direct decomposition was attempted, clarified using X-ray absorption near-edge structure experiments and thermogravimetry, but no conclusive results were obtained.     

Catalytically Promoted NOx Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.     

Combined Effects of Pulsed Discharge Removal of NO,SO2, and NH3 from Flue Gas

Experiments have been performed using pulsed high-voltage discharges with the aim of removing NO and SO ₂ from flue gas obtained from a methane burner. It is found that the NO conversion is strongly increased by the addition of SO ₂ or NH ₃ . When both gases are added simultaneously the increase almost disappears. The synergetic effect can be maintained, as is shown, when NH ₃ is introduced much later than SO ₂ . The SO ₂ removal is already 70% upon stoichiometric addition of NH ₃ , but the electric discharge improves this to >95% and reduces the NH ₃ leak to a few ppm. This increase is probably related to aerosol production by the pulsed discharge which enhances the ammonium salt production. A so-called history effect is observed, i.e., the removal of NO and SO ₂ depends on the time that is taken to reach the required energization. It appears that the discharge has to create favorable conditions for the cleaning process. Using the synergetic and history effects the best cleaning result, at initial concentrations of 300 ppm, is 80% NO removal and 95% SO ₂ removal with 3 ppm NH ₃ leak. In this case the energy cost is 13 eV/NO (or a yield of 90 g NO and 200 g SO ₂ per kWh). Possibilities for further improvement are indicated.     

Immobilized cells in microbial nitrate reduction

The microorganismPseudomonas denitrificans was immobilized in alginate. These immobilized cells were capable of reducing 0.8 mg NO ₃ ^- /min/g wet weight of cells.     

The NiFe2O4 - MgFe2O4 series as electrode materials for electrochemical reduction of NO x

Solid solutions of spinel-type oxides with the composition (x = 0.0, 0.3, 0.5, 0.6, 1.0) were prepared with the glycine-nitrate combustion synthesis (x = 0.0, 0.3, 0.5, 0.6) and the citric-acid combustion synthesis (x = 1.0). The oxides were used as electrode materials in a pseudo-three-electrode setup in the temperature range of 400–600 °C. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the electrochemical behavior in 1% NO and 10% O₂. Measurements show that NiFe₂O₄ has relatively high cathodic activity in both NO and O₂, whereas MgFe₂O₄ shows much higher activity in NO compared to O₂. MgFe₂O₄ was also measured with cyclic voltammetry in 1% NO₂ and different gas mixtures of NO and O₂ at 300 and 400 °C. Results show that the cathodic activities (−0.6 V) are relatively high with current ratios, , ranging from 10.1–167.7 and with a maximum at 400 °C. Dilatometry measurements were performed on the materials in air up to 1,000 °C, and they showed that the Curie temperature could be detected for all samples. Four-point DC resistivity measurements at elevated temperatures show that Ni_0.4Mg_0.6Fe₂O₄ has the highest conductivity, whereas Ni_0.7Mg_0.3Fe₂O₄ and NiFe₂O₄ have the highest conductivity at lower temperatures.     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO2二元氧化物表面NO的NH3催化还原反应的机理。研究了CrOx-CeO2二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程,在SCR反应过程中分别切断NH3和NO的气流,并采集了所生成的原位漫反射红外光谱图,通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从ER机理。     

Theoretical study on the reaction mechanism of (CH<Subscript>3</Subscript>)<Subscript>3</Subscript>CO<Superscript>.</Superscript> radical with NO

The reaction mechanism of (CH₃)₃CO^. radical with NO is theoretically investigated at the B3LYP/6-31G* level. The results show that the reaction is multi-channel in the single state and triplet state. The potential energy surfaces of reaction paths in the single state are lower than that in the triple state. The balance reaction: (CH₃)₃CONO⇔(CH₃)₃CO^.+NO, whose potential energy surface is the lowest in all the reaction paths, makes the probability of measuring (CH₃)₃CO^. radical increase. So NO may be considered as a stabilizing reagent for the (CH₃)₃CO^. radical.     

Electrochemical reduction of NO and O2 on La2−x Sr x CuO4-based electrodes

A series of La_2 − x Sr _x CuO₄ (x = 0.0, 0.05, 0.15, 0.25 and 0.35) compounds was investigated for the use of direct electrochemical reduction of NO in an all-solid-state electrochemical cell. The materials were investigated using cyclic voltammetry in 1% NO in Ar and 10% O₂ in Ar. The most selective electrode material was La₂CuO₄, which had an activity of NO reduction that was 6.8 times higher than that of O₂ at 400 °C. With increasing temperature, activity increased while selectivity decreased. Additionally, conductivity measurements were carried out, and the materials show metallic conductivity behavior which follows an adiabatic small polaron hopping mechanism.     

FTIR-ATR <Emphasis Type="Italic">in situ</Emphasis> observation on the efflorescence and deliquescence processes of Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> aerosols

The efflorescence and deliquescence processes of Mg(NO₃)₂ aerosol particles deposited on ZnSe substrate have been investigated through in situ Fourier transform infrared-attenuated total reflection (FTIR-ATR) technique at the molecular level. At relative humidity (RH) of ∼3%, Mg(NO₃)₂ particles existed as amorphous states. The amorphous Mg(NO₃)₂ particles were transformed into crystalline Mg(NO₃)₂ · nH₂O (n ≤ 5) with slight increasing of RH. Thermodynamically stable Mg(NO₃)₂·6H₂O crystals were gradually formed on the particle surface and started to be dissolved at the saturation point (∼53% RH). At the same time, a continuous phase transition from Mg(NO₃)₂ · nH₂O (n≤5) to Mg(NO₃)₂·6H₂O occurred on the particle surface. This led the solid particles to completely deliquesce at 76% RH, which was much higher than the saturation point of 53% RH. In the efflorescence process, Mg(NO₃)₂ droplets entered into the supersaturated region due to the gradual evaporation of water. Finally, amorphous particles were formed when RH decreased below 5%. In the FTIR-ATR spectra of the supersaturated Mg(NO₃)₂ droplets, the absorbance of the symmetric stretching vibration of NO ₃ ⁻ (v ₁- NO ₃ ⁻ ) clearly became stronger. It resulted from the continuous formation of solvent share ion pairs (SIPs), and even the contact ion pairs (CIPs) between Mg²⁺ and NO ₃ ⁻ . Supported by the Trans-Century Program Foundation for the Talents by the Ministry of Education of China, the National Natural Science Foundation of China (Grant Nos. 20073004, 20473012, and 20673010), the 111 Project (B07012), and the State Key Laboratory of Physical Chemistry for Solid Surface of Xiamen University     

Oxidation and Reduction Processes During NO x Removal with Corona-Induced Nonthermal Plasma

In this paper, the NO-to-NO ₂ conversion in various gaseous mixtures is experimentally investigated. Streamer coronas are produced with a dc-superimposed high-frequency ac power supply (10–60 kHz). According to NO _x removal experiments in N ₂ +NO _x and N ₂ +O ₂ +NO _x gaseous mixtures, it is supposed that the reverse reaction NO ₂ +ONO+O ₂ may not only limit NO ₂ production in N ₂ +NO _x mixtures, but also increase the energy cost for NO removal. Oxygen could significantly suppress reduction reactions and enhance oxidation processes. The reduction reactions, such as N+NON ₂ +O, induce negligible NO removal provided the O ₂ concentration is larger than 3.6%. With adding H ₂ O into the reactor, the produced NO ₂ per unit removed NO can be significantly reduced due to NO ₂ oxidation. NH ₃ injection could also significantly decrease the produced NO ₂ via NH and NH ₂ - related reduction reactions. Almost 100% of NO ₂ can be removed in gaseous mixtures of N ₂ +O ₂ +H ₂ O+NO ₂ with negligible NO production.     

Microbial removal of sulfur dioxide from a gas stream with net oxidation to sulfate

A study has been conducted of the feasibility of utilizing the sulfate reducing bacteriumDesulfovibrio desulfuricans and the chemoautotrophThiobacillus denitrificans as a basis of a microbial process for the removal of sulfur dioxide from a gas with net oxidation to sulfate. In reactors-in-series, SO₂ was reduced to H₂S in the first stage by D.desulfuricans. The H₂S was then stripped with nitrogen and sent to a second stage where it was oxidized to sulfate by T.denitrificans. A sulfur balance demonstrated complete reduction of SO₂ to H₂S in the first stage and complete oxidation of H₂S to sulfate in the second stage.     

Selective catalytic reduction of NO with CO on Pt/W–Ce–Zr catalysts

Various Pt catalysts (Pt/ZrO₂, Pt/CeO₂, Pt/CeZrO, Pt/WO₃/ZrO₂ and Pt/WO₃/CeZrO) were prepared and characterized, and their catalytic reduction reactions of NO by CO, with or without the presence of excess oxygen, were investigated. The results of temperature-programmed experiments showed that CO could be easily oxidized over Pt/CeO₂ and Pt/CeZrO while the introduction of WO₃ into the catalyst (Pt/WO₃/CeZrO) inhibited the reduction of catalyst surface; NO could not dissociate over those catalysts in oxidized state but after CO reduction at a low temperature, NO dissociation took place only over Pt/CeO₂ and Pt/CeZrO catalysts. For NO + CO reaction, those easily reduced catalysts Pt/CeO₂ and Pt/CeZrO exhibited better catalytic performances, and NO could be rapidly converted below 350 °C. For the reaction with the presence of excess O₂, the NO conversions were significantly inhibited, but better NO conversions were obtained over the tungstate-contained catalysts when compared with Pt/CeO₂ and Pt/CeZrO. The higher activities of Pt/W–Ce–Zr catalysts were attributed to their high acidities.     

The synthesis and characterisation of some closed polyhedral metallocarbon clusters

Ligands containing unsaturated C₂ and C₄ units have been reacted with triruthenium dodecacarbonyl to produce new organometallic clusters with simple closo-Ru_xC_y polyhedral frameworks which may be regarded as quasi-carboranes. The thermolysis of [Ru₃(CO)₁₂] with 1,4-diphenybutadiene yields the new clusters [Ru₃(CO)₈(μ₃-CPh(CH)₂CPh)] 2 and [Ru₄(CO)₉(μ₄-CPhCCH₂CH₂Ph)] 3, while treatmentof a solution of [Ru₃(CO)₁₂] and diphenylacetylene with trimethylamine N–oxide (Me₃NO) yields [Ru₂(CO)₆(μ-{C₂Ph₂}₂CO)] 4 as the major product and the new cluster [Ru₄(CO)₁₁(μ₄-C₂Ph₂)₂] 5. The solid-state structures of 2, 3 and 5 have been established by single crystal X-ray diffraction analyses and are shown to possess closo-Ru₃C₄ pentagonal bipyramidal, closo-Ru₄C₂ octahedral and closo-Ru₄C₄ dodecahedral skeletons, respectively. The structure and bonding in all three clusters may be rationalised using the Wade–Mingos polyhedral skeletal electron pair approach.