Trace element composition of atmospheric aerosols in Ankara,Turkey, determined by instrumental neutron activation analysis

Twenty six trace elements were determined by INAA in the aerosol samples collected at two stations in Ankara, Turkey. Industrially derived elements, Se, As, Sb, Zn and Au did not show seasonal dependence and they were not substantially enriched. Elements originating from coal combustion are highly enriched and have higher concentrations in the winter. Correlation factors indicate that motor vehicles, coal and oil combustion are the main sources of aerosols over the city.     

Trace element exposure in man by instrumental neutron activation analysis of hair

A nondestructive instrumental neutron activation technique was used to analyze human hair samples collected from people living in metropolitan and rural areas in Korea. Samples were also collected from factory workers and cancer patients. Hair from metropolitan area residents contain higher concentrations of Ca, Mg, Zn, Cu, Na, Br, Mn, I and S than rural area residents. Concentrations of I and S from cancer patients, Mg, Zn, Al, Na, Mn and As from glassware workers were relatively higher. The results show that the trace element concentrations of the hair are possibly related to the trace element concentrations in the body.     

Trace element analyses of spectroscopically pure silicon dioxide by instrumental neutron activation analysis

Spectroscopically pure, 99.999% silicon dioxide (SiO₂) from five different companies was analysed for trace element impurities by instrumental neutron activation analysis using semiconductor detectors and gamma-ray spectrometry. If large amounts of these purified SiO₂ samples are added to, geological samples with low trace element contents e.g., mineral separates such as quartz, feldspar and olivine, the trace element contents of the SiO₂ are a significant contaminant.     

Determination of trace element levels in polyethylene by instrumental neutron activation analysis

Elements Al, As, Au, Br, Cl, Co, Cr, Cu, Fe, Hg, K, La, Mn, Mo, Na, Sb, Sc, Sm, V, and Zn were determined by INAA in several brands and batches of high pressure polyethylene (PE) Bralen (Slovnaft Bratislava, Czechoslovakia). A large scatter of trace element contents was found in both granules and foils, indicating an inhomogeneous distribution for the majority of the above mentioned elements present as impurities in PE. Larger amounts of the elements Al, Mn, and Sb were found in foils than in granules. Blank values resulting from using of PE Bralen as a canning material for INAA were compared to trace element concentration in human hair samples, too.     

Trace element concentrations in human bone using instrumental neutron activation analysis

Instrumental neutron activation analysis has been applied to analyze 23 bone samples obtained from Libyan patient aged (3–80) years for the study of the concentration levels of trace elements Ba, Br, Ca, Fe, Sr and Zn and their concentration pattems regarding to the age and sex of the patients.     

Trace element concentration in human gallstones using instrumental neutron activation analysis

The concentrations of trace elements in two types of gallstones in 24 female patients in Tripoli aged 24–60 years have been determined using instrumental neutron activation analysis. These elements are Co, Fe, Mn, Se and Zn. The results are expressed in ppm and are in agreement with reported values. The data suggested that the concentrations of trace elements increase with age.Presented at the MTAA-8 Conference, September 16–20, 1991, Vienna, Austria.     

Trace element determination in aerosols from the Antarctic Peninsula by neutron activation analysis

The knowledge of the composition of atmospheric aerosols in remote areas, like the Antarctic Peninsula is of great importance for the study of long-range transport of atmospheric contaminants and also from the climatological point of view. Instrumental neutron activation analysis was applied in the present work to determine the elements Al, V, Mn, Na, Cl, Ca, Au, Br, Sb, Sc, Fe, Zn, K, Th and La in aerosol samples collected in the Brazilian Antarctic Station Comandante Ferraz (62° S, 58° W) located on King George Island in the Antarctic Peninsula. The sources of the aerosols were investigated by means of Enrichment Factors and Principal Factor Analysis. Both methods yielded similar results. Sea and soil were identified as the major sources of aerosols, in the samples collected at the Brazilian Station.     

Air pollution monitoring of an urban dust in Daejeon city,Korea by using instrumental neutron activation analysis

For air pollution monitoring, about 1300 airborne particulate matter samples were collected by using a low volume air sampler and a polycarbonate filter at two sampling sites in an urban region, Daejeon, the middle of Korea from 2003 to 2006. Mass concentrations of the black carbon were measured using a smoke stain reflectometer. The concentrations of 24 elements in the collected samples were analyzed by using instrumental neutron activation analysis, and its temporal trends and enrichment factors were investigated under different environmental conditions. Analytical control was carried out by using certified reference materials.     

Trace element determination in suspended matter and in sedimetns-by instrumental neutron activation analysis

By means of instrumental neutron activation, more than 20 trace elements are determined in suspended matter in Rhine water, Main water and Rhine sediments. Monoelement and multielement standards are used for calibration. Sample collection, separation of suspended matter by filtration or centrifugating and sample preparation are described. The results obtained by filtration and by centrifuging are compared. Interferences in evaluation of the γ-spectra and their influence on the results are discussed. Systematic errors are detected by participation in ring analysis.     

Study of size-fractionated coal-combustion aerosols using instrumental neutron activation analysis

The chemical composition of aerosols emitted during coal combustion was studied as a function of particle size down to 0.01 m. The aerosol collections were carried out in a 81 MW capacity boiler that burned Venezuelan coal in a circulating fluidized bed combustion chamber. The samples were analyzed with upstream of the electrostatic precipitator using a Berner low-pressure impactor, which was quipped with a cyclone pre-cutter to avoid overloading of the first impaction stages. The samples were analyzed by INAA for up to about 40 elements. The elemental concentrations in the particulate matter for each impaction stage were plotted as a function of stage number (particle size). For the elements Na, Al, K, Ca, Sc, Ti, V, Ga, La and Sm, the concentration variation was limited to a factor of 2 to 4, and the concentrations of these elements were lower for the initial and final impactor stages than for the intermediate particle sizes. The variations were also limited to a factor of 2–4 for Mn, Fe, As, Sb and Th, butall these elements showed increasing concentrations with decreasing particle size. Still other elements, such as Ni, Cr, Co, Za, W, Mo and the halogens, were highly enriched (up to 20–100 fold) in the fine particles when compared with the coarse particles.     

Trace elements in Turkish tobacco determined by instrumental neutron activation analysis

The concentration of 20 trace elements in nine different brands of Turkish cigarette tobacco and in a brand of pipe tobacco and in tobacco ash has been determined by instrumental neutron activation analysis. The percent transference of elements into smoke has been estimated from the amounts remaining in the ash.     

Trace element contents in atmospheric suspended particles: inferences from instrumental neutron activation analysis

 This study focuses on the determination of trace element concentrations in total suspended particles by instrumental neutron activation analysis (INAA) in two different areas in Northeastern Spain (a rural area influenced by the emissions of a large coal-fired power station, and the urban and industrial areas of Castellón). Total suspended particles were sampled by means of standard MCV high- and medium-volume captors, using cellulose membrane filters of 0.8 and 0.45 μm pore size. Preliminary research was performed on the homogeneous distribution of elements in the sample filters and on the study of blank filters for the calculations of the background average element contents. The results obtained allowed to distinguish different major anthropogenic sources of trace elements in the atmosphere at the sampling sites: a) Zr, Hf, Sc, U and Th are related to atmospheric pollution derived from the ceramic industry of the Castellón area; b) As, Cr, Cs, Rb, Sb, Se, Zn are related to traffic and other industrial emission in the Castellón area, and As, Cr, Sb and Zn to power generation emissions in the rural area. Received: 26 April 1996 / Revised: 29 July 1996 / Accepted: 2 August 1996     

Trace element analysis of some shaving powders commonly marketed in Nigeria using instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) technique has been employed viak ₀ approximation method to determine elemental composition of five shaving powders commonly marketed in Nigeria. Fe displayed the highest concentrations in the range 1000–2000 g·g^–1. Na and Zn concentrations were established in the range 200–400 g·g^–1. Heavy elements like Ga, La, Cr, Co, Ag, Ce and Nd concentrations were noted in the lower range of 1–10 g·g^–1 Br, As, Sb, Sm, Eu, W, Cs, Tb, Yb, Hf, Ta, Th and U concentrations were established in even lower traces in the <1 g·g^–1 range. Results obtained for a certified reference material, CANMET BL-1 and CERT (in house) Kaolin standard compared favourably with the literature values thus establishing the results presented for the shaving powders.     

Single-crystal trace element analysis in rock-forming minerals by instrumental neutron activation analysis

We have developed an INAA techniques for analyzing single crystals extracted from rocks. Trace element contents have been measured in a large variety of mineral species, as well as isotopic ratios of some REE in minerals related to natural fission reactions. The sensitivity of INAA allows to avoid the main shortcomings of usual mineral geochemistry: (1) only very short quantities of minerals are needed (down to a few g), so that even very sparse minerals could be analyzed, (2) purity of minerals is carefully checked, and (3) the heterogeneity of a population may be studied. The method is especially useful when applied to minerals acting as tracers for some element families, e.g. REE in Ca-bearing minerals (fluorite, apatite, titanite, gamet) and Zr-bearing minerals, or chalcophile elements (Co, Ni, As, Sb, Mo, Ag, Au and Se) in sulfides. We present an application of the method to the Oklo U deposit in Gabon showing that features outlined above are of special interest for the study of hydrothermal processes.     

Trace characterization of high-purity nickel by instrumental and radiochemical neutron activation analysis

Summary The high activity of the radionuclides ⁶⁵Ni (t_1/2=2.52 h) and ⁵⁸Co (t_1/2=70.8 d) imposes severe limitations on the performance of direct instrumental neutron activation analysis of nickel. The extent of the interference of the ⁵⁸Co depends on the ratio of the fluxes of the fast and thermal neutrons. A method of selective removal of cobalt, based on extraction with -nitroso--naphthol has been developed for the purpose of radiochemical NAA. Separation yields have been determined for 36 elements. The detection limits obtainable with both the instrumental and the radiochemical method are <10^–4 g/g for the elements Au, Eu, Ir, La, Sc and Sm, between 10^–4 and 10^–3 g/g for Cr, Cs, Hf, Hg, Lu, Re, Sb, Ta, Th, Tm and Yb, between 10^–3 and 10^–2 g/g for As, Ag, Br, Ce, Ga, Na, Ru, Se, W and Zn, and in the range 0.01–1 g/g for Ba, Cd, Co, Fe, In, K, Mo, Nd, Pd, Rb, Sn, U and Zr.     

Trace element analysis of human blood serum by neutron activation analysis

An attempt was made to see if there is any correlation between the trace element concentrations in the human blood serum and some specific disease. The serum samples of the patients suffering from cancer, Down syndrome, and Banti syndrome were analyzed by the neutron activation method and compared with the trace element concentrations observed among the clinically healthy men. The cancer patients gave below normal concentrations in Rb, Mn, Fe, Co, Cu, Zn, Al and Se. The Down syndrome patients were found to have similar deficiencies in Cr, Mn, Fe, Co, Zn, Cu and Sb.     

Trace element analysis of motor oil by reactor neutron activation analysis

Normal motor oil have been analyzed by RNAA using thermal neutrons and single comparator method. The samples were taken from the oil carter of an engine. The concentration of trace elements have been measured as a function of running kilometers by -ray spectrometry. The trace elements which have been detected are Na, Mg, Al, Cl, V, Mn, Cu, Cr, Fe, Co, Zn, Br, Sb and Cd.     

Determination of elemental levels in radiopharmaceuticals by instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) was applied to thedetermination of the concentration levels of Na, Mg, Al, Cl, K, Sc, Ti, V,Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Zr, Mo, Ag, Cd, Sb, I, Cs,Ba, La, Ce, Nd, Sm, Eu, Tb, Dy, Yb, Lu, Hf, Ta, Hg, Th and U in three radiopharmaceuticals.The irradiation of the samples was carried out in a 0.5 kW Bariloche RA-6Research Nuclear Reactor and the induced gamma-activity was measured by gamma-spectrometry.INAA proves to be an accurate and precise technique to obtain a quick informationon the concentration levels of several minor and trace components in radiopharmaceuticals.The quantification of heavy toxic elements is required for the registrationof radiopharmaceuticals.     

Trace element determination in a mussel reference material using short irradiation instrumental neutron activation analysis

The production of certified reference materials in Brazil, and the consequent availability to national end users, is an important task for the enhancement of Metrology in Chemistry status in the country, as these materials are used for method validation, equipment calibration and for establishing metrological traceability links. In this study, Instrumental Neutron Activation Analysis (INAA) was applied to the determination of bromine, chlorine, magnesium, manganese, potassium and vanadium in a mussel reference material produced at IPEN-CNEN/SP. For the determination of these elements via the comparative INAA method, the respective analytical radionuclides, ⁸⁰Br, ³⁸Cl, ²⁷Mg, ⁵⁶Mn, ⁴²K and ⁵²V, are short lived and then, short irradiations are used. Six subsamples from two bottles of the Perna perna mussel reference material were analyzed. Each subsample was simultaneously irradiated with elemental standards for 10 s at the IEA-R1 research nuclear reactor through a pneumatic transfer system. After suitable decay periods, gamma radioactivity measurements were carried out, using a hyperpure germanium detector. The accuracy of the method was checked by using the NIST SRM 1566b–“Oyster Tissue” certified reference material. The comparison of the results obtained in this study to the robust mean of the interlaboratorial collaborative trial used for the characterization of the mussel reference material was performed via z-score tests. The comparison showed that the short irradiation INAA method is suitable for the characterization of new reference materials.     

Trace element determination in high-purity aluminum clad samples by k 0-based internal monostandard instrumental neutron activation analysis

The k₀-based internal monostandard instrumental neutron activation analysis (IM-INAA) method was applied for quantification of trace impurities in seven high purity aluminum samples used as fuel cladding in a research reactor. Samples along with BCS CRM 182 (Si–Al alloy) were irradiated in high flux reactor neutrons for 10–15 h. In situ detection efficiency, needed in concentration calculation ratio by IM-INAA, was obtained using gamma rays of activation products produced in the samples. Elemental concentration ratios obtained with respect to Fe (used as internal monostandard) were converted to absolute concentrations by determining concentration of Fe by relative method of NAA. Concentrations of ten trace elements (Sc, Cr, Co, Zn, Ga, La, Ce, Sm, W and Hf) including major element Fe were determined in this work. The method used is non-destructive in nature and does not need multielement standards. Results of IM-INAA were compared with those obtained by relative method of INAA and inductively coupled plasma atomic emission spectrometry (ICP-AES). Details of methodologies and results obtained by all methods are discussed and compared in the paper.