Fe(II) hydrolysis in aqueous solution: A DFT study

Species arising from Fe(II) hydrolysis in aqueous solution have been investigated using density-functional methods (DFT). The different tautomers and multiplicities of each species have been calculated. The solvation energy has been estimated using the UAHF–PCM method. The hydrolysis free energies have been estimated and compared with the available experimental data. The different hydrolysis species have distinct geometries and electronic structures. The estimated ionization potential of the hydrolyzed species is linearly dependent to the number of hydroxyls present in the complex. The estimated Fe(II)/Fe(III) oxidation potential is in good agreement with previously published results about 0.29 V larger than the experimental value. The results highlight the importance of the chemical speciation in describing electron transfer processes at a molecular level. The PBE/TZVP/UAHF–PCM method has been found to describe correctly the hydrolysis free energies of Fe(II) with an average error about 5 kcal mol⁻¹ from the experimental values.     

Copper(II) ion hydrolysis in aqueous solution

A copper(II) ion-selective-electrode potentiometric method was used to determine the first and second hydrolysis constants of Cu²⁺. Special techniques prevented copper(II) hydroxide precipitation, and copper(II) carbonate and cipper(II) organic complexation during the titration of the experimental solution over the pH range 6.8–8.4. The large change in the total copper concentration during the titration due to adsorption of copper onto the vessel walls was accounted for by measuring the total copper concentration at each pH by atomic absorption spectrophotometry. The two hydrolysis constants were determined at 25°C in 0.7 and 0.05m NaClO₄ media. The measured stability constants are independent of the copper concentration and yield similar zero ionic strength values. Also, the stepwise equilibrium constants decrease as the ligand number increases.     

Kinetics of hydrolysis of xylometazoline (XYL) in aqueous solution

The effect of pH (over the range of 2.10 - 11.90) and temperature (from 353 K to 363 K) on the stability of xylometazoline (XYL) has been studied by high performance liquid chromatography (HPLC). Using the dependence of log k vs pH, the hydrolysis of both the undissociated and dissociated XYL-molcules has been described by micro rate constants k₁ and k₂. Thermodynamic parameters (activation energy, enthalpy and entropy) of the composition reaction were calculated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Kinetics and mechanism of an unique hydrolysis reaction of (hexafluoroacetylacetonato)bis(ethylenediamine)cobalt(III) in aqueous solution

Summary Addition of base to the title complex results in the rapid reversible formation of the hydrolysed species Co(en)₂-(hfac · OH)⁺ in which the coordinated hexafluoroacetylacetonato ligand contains a hydroxyl group on the carbonyl carbon atom. The kinetics of both the forward hydrolysis and reverse acidolysis reactions were followed spectrophotometrically using stopped-flow and T-jump techniques. The corresponding rate constants areca. 3×106 and 1×10⁸ M^–1s^–1, respectively, for various buffer systems at 25 °C and ionic strength 1.0 M. A combination of the kinetic and equilibrium data enables the estimation of the uncatalyzed (spontaneous) forward and reverse reaction components. The results are discussed with reference to similar data reported for the hydrolysis and reverse acidolysis reactions of the uncoordinated acetylacetonato ligand.     

Multinuclear NMR study of lanthanide(III) complexes of 1,2-PDTA in aqueous solution

The complexation of lanthanide(III) cations with 1,2-propanediaminetetraacetate (1,2-PDTA) in aqueous solution has been investigated by ¹⁰Na, ³⁵Cl, ²H and ¹¹O NMR shift measurements. It has been shown that the contact shifts are dominant for ¹⁷O, ¹⁶Cl and ²H (only for the heavier lanthanide series) and the pseudocontact shifts are dominant for ²⁵Na. It is suggested that the 1,2-PDTA ligand is bound pentadentately via the two nitrogens and the three carboxylates for the lighter lanthanide complexes, hexdentately via the two nitrogens and the four carboxylates for the heavier ones. The numbers of the water coordinated were determined. The small amount of chloride anion in inner coordination sphere was observed.     

γ-Induced reduction of Eu(III) in aqueous solution

-radiation of Co⁶⁰ has been applied to reduce Eu(III) to Eu(II) in aqueous solutions of the mixture of rare earths. The kinetics of the process has been investigated as a function of the absorbed radiation dose and organic additive concentration.

---

+3 - Co⁶⁰: Eu(III)Eu(II). .

     

Density functional theory study of uranium(VI) aquo chloro complexes in aqueous solution

Mixed uranyl aquo chloro complexes of the type [UO2(H2O)xCly]2-y (y = 1, 2, 3, 4; x + y = 4, 5) have been optimized at the BLYP, BP86, and B3LYP levels of density functional theory in vacuo and in a polarizable continuum modeling bulk water (PCM) and have been studied at the BLYP level with Car-Parrinello molecular dynamics (MD) simulations in the gas phase and in explicit aqueous solution. Free binding energies were evaluated from static PCM data and from pointwise thermodynamic integration involving constrained MD simulations in water. The computations reveal significant solvent effects on geometric and energetic parameters. Based on the comparison of PCM-optimized or MD-averaged uranyl-ligand bond distances with EXAFS-derived values, the transition between five- and four-coordination about uranyl is indicated to occur at a Cl content of y = 2 or 3.     

Mono-complex formation kinetics of 2-acetylcyclohexanonatochromium(III) in aqueous solution

The kinetics and mechanism of the reaction of complexation of chromium(III) with 2-acetyl-cyclohexanone has been investigated spectrophotometrically in aqueous solution at 50°C and ionic strength 0.5 mol dm^?3 NaClO₄. The equilibrium constants of the complex have been determined. The mechanism proposed to account for the kinetic data involves a double reversible pathway where both Cr³⁺ and Cr(OH)²⁺ react with the enol tautomer of the ligand with rate constants of 9.6 × 10^?3 dm³ mol^?1 s^?1, and 3.69 × 10^?2 dm³ mol^?1 s^?1, respectively. Some discussions are made on the basis of Eigen-Wilkins theory considering the effect of solvent exchange on the complex formation.     

Spectroscopic properties of neodymium(III)-containing polyoxometalates in aqueous solution

The spectroscopic properties of the neodymium(III)-containing polyoxometalates (POMs) [Nd(PW(11)O(39))(2)](11-), [Nd(PMo(2)W(9)O(39))(2)](11-), [Nd(PMo(4)W(7)O(39))(2)](11-), [Nd(PMo(6)W(5)O(39))(2)](11-), [Nd(SiMo(2)W(9)O(39))(2)](13-), [Nd(P(2)W(17)O(61))(2)](17-), [NdW(10)O(36)](9-), [NdP(5)W(30)O(110)](12-) and [NdAs(4)W(40)O(140)](25-) are described. Absorption spectra of aqueous solutions of the complexes have been recorded and the transition intensities are parameterised in terms of the Judd-Ofelt intensity parameters Omega(lambda) (lambda=2, 4, 6). Marked differences were found between the luminescence lifetimes of the complexes of the type Nd(POM) and those of the type Nd(POM)(2), due to a better shielding of the neodymium(III) ions from the bulk water molecules in the latter type of complexes.     

Revised ionic radii of lanthanoid(III) ions in aqueous solution

A new set of ionic radii in aqueous solution has been derived for lanthanoid(III) cations starting from a very accurate experimental determination of the ion-water distances obtained from extended X-ray absorption fine structure (EXAFS) data. At variance with previous results, a very regular trend has been obtained, as expected for this series of elements. A general procedure to compute ionic radii in solution by combining the EXAFS technique and molecular dynamics (MD) structural data has been developed. This method can be applied to other ions allowing one to determine ionic radii in solution with an accuracy comparable to that of the Shannon crystal ionic radii.     

Equilibria in the system of aquachlorohydroxogold(III) complexes in aqueous solution

AuCl₄⁻ + jOH⁻ + kH₂O = AuCl_{4 − j − k} OH _j (H₂O) _k ^{k − 1} + (j + k)Cl⁻ equilibria at 20°C were studied spectrophotometrically, and the constants β _jk in acid aqueous solutions were determined for I = 2.0 mol/L (HClO₄).     

Iron dissolution in aqueous AOT solution

The effects of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) on the electrochemical behavior of iron were studied by potentiodynamic and potentiostatic techniques and open-circuit potential measurements. Experiments were made in both neutral and alkaline AOT solutions (pH 7 and pH 12). It was found that AOT-assisted dissolution is initiated on a passivated iron surface and that the oxidation current leads to the formation of a gel-like film on the electrode surface. This dissolution process was investigated as a function of pH, potential, and electrode rotation rate and the corrosion products were characterized by polarizing microscopy, SEM/EDX, and IR spectroscopy. The gel-like material is a mixed NaAOT-Fe(AOT)3 lamellar mesophase and a structure for this mesophase is proposed.     

Theoretical study on the alkaline hydrolysis of methyl thioacetate in aqueous solution

A base-catalyzed hydrolysis reaction of thiolester has been studied in both gas and solution phases using two ab initio quantum mechanics calculations such as Gaussian09 and CPMD. The free-energy surface along the reaction path is also constructed using a configuration sampling technique, namely, the metadynamics method. While there are two different reaction paths obtained for the potential profile of the base-catalyzed hydrolysis reaction for thiolester in the gas phase, a triple-well reaction path is computed for the reaction in the solution phase by two quantum mechanics calculations. Unlike the S(N)2 mechanism (a concerted mechanism) found for the gas-phase reaction, a nucleophilic attack from the hydroxide ion on the carbonyl carbon to yield a tetrahedral intermediate (a stepwise mechanism) is observed for the solution-phase reaction. Moreover, the energy profiles computed by these two theoretical calculations are found to be very comparable with those determined experimentally.     

Photochemistry of Fe(III) complex with glyoxalic acid in aqueous solution

Nanosecond laser flash photolysis technique was used to study photochemistry of Fe(III) complex with glioxalic acid. The primary photochemical process was found to be inner-sphere electron transfer in the excited complex leading to formation of the long-lived radical complex [Fe^II … ^·OOC-C(O)H]²⁺. A number of important spectral-kinetic parameters of this species were determined and mechanism of photolysis of Fe(III)-glioxalate complex was proposed. 1 The article was translated by the authors.     

The stabilization of managese(III) by azide ions in aqueous solution

The evidences of spontaneous oxidation of Mn(II) by the dissolved oxygen in azide buffer medium, which is dependent on the N (-)(3)HN (3) concentration, suggested a formation of stable Mn(III) complexes due to marked colour changes. Spectrophotometric studies combined with coulometric generation of Mn(III), in presence of large excess of Mn(II), showed a maximum absorbance peak at 432 nm. The molar absorptivity increases with azide concentration (0.44-3.9 mol 1(-1)) from 3100 to 6300 mol(-1) 1 cm(-1), showing a stepwise complex formation. Potential measurements of the Mn(III) Mn(II) system in several azide aqueous buffers solutions: 1.0 x 10(-2) mol 1(-1) HN(3), (0.50-2.0 mol 1(-1)) N(-)(3) and 5.0 x 10(-2) mol 1(-1) Mn(II) and constant ionic strength 2.0 mol 1(-1), kept with sodium perchlorate, leads to the conditional potential, E(0')x, in several azide concentrations at 25.0 +/- 0.1 degrees C. Considering the overall formation constants of Mn(II) N (-)(3), from former studies, and the potential, E(0')s = 1.063 V versus SCE, for Mn(III) Mn(II) system in non-complexing media, it was possible to calculate the Fronaeus function, F(0)(L), and the following overall formation constants: beta(1) = 1.2 x 10(5) M(-1), beta(2) = 6.0 x 10(8) M(-2), beta(3) = (2.4 +/- 0.7) x 10(11) M(-3), beta(4) = (1.5 +/- 0.5) x 10(11) M(-4) and beta(5) = (9.6 +/- 0.8) x 10(11) M(-5) for the Mn(III) N (-)(3) complexes. These data give important support to understand the importance of Mn(II) and Mn(III) synergistic effect on the analytical method of S(IV) determination based on the Co(II) autoxidation.     

Electrochemiluminescence of terbium (III)-two fluoroquinolones-sodium sulfite system in aqueous solution

The electrochemiluminescence (ECL) of Tb3+-enoxacin-Na2SO3 system (ENX system) and Tb3+-ofloxacin-Na2SO3 system (OFLX system) in aqueous solution is reported. ECL is generated by the oxidation of Na2SO3, which is enhanced by Tb3+-fluoroquinolone (FQ) complex. The ECL intensity peak versus potential corresponds to oxidation of Na2SO3, and the ECL emission spectra (the peaks are at 490, 545, 585 and 620 nm) match the characteristic emission spectrum of Tb3+, indicating that the emission is from the excited state of Tb3+. The mechanism of ECL is proposed and the difference of ECL intensity between ENX system and OFLX system is explained. Conditions for ECL emission were optimized. The linear range of ECL intensity versus concentrations of pharmaceuticals is 2.0 x 10(-10) -8.0 x 10(-7)mol l(-1) for ENX and 6.0 x 10(-10) -6.0 x 10(-7)mol l(-1) for OFLX, respectively. A theoretical limit of detection is 5.4 x 10(-11)mol l(-1) for ENX and 1.6 x 10(-10)mol l(-1) for OFLX, respectively. The ECL was satisfactorily applied to the determination of the two FQs in dosage form and urine sample.     

Energy transfer between 1,3-dimethylxanthine and europium(III) in aqueous solution

Luminescence of 1,3-dimethylxanthine in solution is impaired owing to collisional deactivation by solvent molecules and matrix interferences. Energy absorbed by 1,3-dimethylxanthine has been transferred to trivalent europium which emits narrow-band radiation in a region distant from background interferences. The enhanced luminescence of trivalent europium was utilized for the determination of 1,3-dimethylxanthine in buffered aqueous solution. An analytically useful range from 1.1 × 10^?5?5.0 × 10^?4 M and a detection limit of 1.1 × 10^?5 M were obtained. The methodology for the analytical procedure was determined.