Planning lot sizes and capacity requirements in a single stage production system

The problem addressed in this paper is the determination of lot sizes for multiple products to be produced on a single production facility with limited capacity. Demand is assumed to be deterministic and time-varying and must be met without backordering. The objective is to minimize the sum of setup and inventory holding costs. A heuristic solution procedure of the period-by-period type is presented. Moreover, the interaction between lot sizing and smoothing of capacity requirements is investigated in a case study.     

On the equivalence of strong formulations for capacitated multi-level lot sizing problems with setup times

Several mixed integer programming formulations have been proposed for modeling capacitated multi-level lot sizing problems with setup times. These formulations include the so-called facility location formulation, the shortest route formulation, and the inventory and lot sizing formulation with (?, S) inequalities. In this paper, we demonstrate the equivalence of these formulations when the integrality requirement is relaxed for any subset of binary setup decision variables. This equivalence has significant implications for decomposition-based methods since same optimal solution values are obtained no matter which formulation is used. In particular, we discuss the relax-and-fix method, a decomposition-based heuristic used for the efficient solution of hard lot sizing problems. Computational tests allow us to compare the effectiveness of different formulations using benchmark problems. The choice of formulation directly affects the required computational effort, and our results therefore provide guidelines on choosing an effective formulation during the development of heuristic-based solution procedures.     

Constrained Lot-Sizes under Conditions of Inventory Growth

When average aggregate inventory levels are constrained to equal a constant level over time, optimal lot sizes can be identified which strike a balance between holding costs and set-up costs among items which form the aggregate. However, when it is desirable to change aggregate inventory levels over time, assumptions implicit in the traditional formulation are violated. The procedure proposed generates lot sizes which are consistent not only with the current average aggregate inventory level but also with its projected growth over the planning horizon. Comparison is made to lot sizes generated by the misapplication of traditional lot sizing methods to the inventory growth situation.     

回收率依赖回收产品质量的再制造EOQ模型

研究回收率依赖回收产品质量情况下制造/再制造混合系统的EOQ模型.该模型假设顾客的需求可通过新产品的制造和回收产品的再制造两种方式满足,且这两种产品无质量差异;需求率是确定的、连续的;总成本包括制造和再制造的固定启动成本,可销售产品和回收品的库存成本,以及缺货成本.当假设缺货成本无限大时给出不允许缺货情况下的模型.给出算例验证模型的有效性.     

Integer linear programming formulation of the material requirements planning problem

Lot sizing procedures for discrete and dynamic demand form a distinct class of inventory control problems, usually referred to asmaterial requirements planning. A general integer programming formulation is presented, covering an extensive range of problems: single-item, multi-item, and multi-level optimization; conditions on lot sizes and time phasing; conditions on storage and production capacities; and changes in production and storage costs per unit. The formulation serves as a uniform framework for presenting a problem and a starting point for developing and evaluating heuristic and tailor-made optimum-seeking techniques.     

Profit maximization in an inventory system with time-varying demand,partial backordering and discrete inventory cycle

In this paper, an inventory problem where the inventory cycle must be an integer multiple of a known basic period is considered. Furthermore, the demand rate in each basic period is a power time-dependent function. Shortages are allowed but, taking necessities or interests of the customers into account, only a fixed proportion of the demand during the stock-out period is satisfied with the arrival of the next replenishment. The costs related to the management of the inventory system are the ordering cost, the purchasing cost, the holding cost, the backordering cost and the lost sale cost. The problem is to determine the best inventory policy that maximizes the profit per unit time, which is the difference between the income obtained from the sales of the product and the sum of the previous costs. The modeling of the inventory problem leads to an integer nonlinear mathematical programming problem. To solve this problem, a new and efficient algorithm to calculate the optimal inventory cycle and the economic order quantity is proposed. Numerical examples are presented to illustrate how the algorithm works to determine the best inventory policies. A sensitivity analysis of the optimal policy with respect to some parameters of the inventory system is developed. Finally, conclusions and suggestions for future research lines are given.

     

Economic lot sizes and vehicle scheduling

In this paper a relationship between the vehicle scheduling problem and the dynamic lot size problem is considered. For the latter problem we assume that order quantities for different products can be determined separately. Demand is known over our n-period production planning horizon. For a certain product our task is to decide for each period if it should be produced or not. If it is produced, what is its economic lot size? Our aim here is to minimize the combined set-up and inventory holding costs. The optimal solution of this problem is given by the well-known Wagner-Whitin dynamic lot size algorithm. Also many heuristics for solving this problem have been presented. In this article we point out the analogy of the dynamic lot size problem to a certain vehicle scheduling problem. For solving vehicle scheduling problems the heuristic algorithm developed by Clark and Wright in very often used. Applying this algorithm to the equivalent vehicle scheduling problem we obtain by analogy a simple heuristic algorithm for the dynamic lot size problem. Numerical results indicate that computation time is reduced by about 50% compared to the Wagner-Whitin algorithm. The average cost appears to be approximately 0.8% higher than optimum.     

MIP models for production lot sizing problems with distribution costs and cargo arrangement

This study presents mixed integer programming (MIP) models for production lot sizing problems with distribution costs using unit load devices such as pallets and containers. Problems that integrate production lot sizing decisions and loading of the products in vehicles (bins) are also modelled, in which constraints such as weight limits, volume restrictions or the value of the cargo loaded in the bins are considered. In general, these problems involve a trade-off between production, inventory and distribution costs. Lot sizing decisions should take into account production capacity and product demand constraints. Distribution decisions are related to the loading and transport of products in unit load devices. The MIP models are solved by the branch-and-cut method of an optimization package and the results show that these approaches have the potential to address different practical situations.     

Dynamic economic lot size model with perishable inventory and capacity constraints

In this study, we consider a dynamic economic lot sizing problem for a single perishable item under production capacities. We aim to identify the production, inventory and backlogging decisions over the planning horizon, where (i) the parameters of the problem are deterministic but changing over time, and (ii) producer has a constant production capacity that limits the production amount at each period and is allowed to backorder the unmet demand later on. All cost functions are assumed to be concave. A similar problem without production capacities was studied in the literature and a polynomial time algorithm was suggested (Hsu, 2003 [1]). We assume age-dependent holding cost functions and the deterioration rates, which are more realistic for perishable items. Backordering cost functions are period-pair dependent. We prove the NP-hardness of the problem even with zero inventory holding and backlogging costs under our assumptions. We show the structural properties of the optimal solution and suggest a heuristic that finds a good production and distribution plan when the production periods are given. We discuss the performance of the heuristic. We also give a Dynamic Programing-based heuristic for the solution of the overall problem.     

A linear programming embedded genetic algorithm for an integrated cell formation and lot sizing considering product quality

Production lot sizing models are often used to decide the best lot size to minimize operation cost, inventory cost, and setup cost. Cellular manufacturing analyses mainly address how machines should be grouped and parts be produced. In this paper, a mathematical programming model is developed following an integrated approach for cell configuration and lot sizing in a dynamic manufacturing environment. The model development also considers the impact of lot sizes on product quality. Solution of the mathematical model is to minimize both production and quality related costs. The proposed model, with nonlinear terms and integer variables, cannot be solved for real size problems efficiently due to its NP-complexity. To solve the model for practical purposes, a linear programming embedded genetic algorithm was developed. The algorithm searches over the integer variables and for each integer solution visited the corresponding values of the continuous variables are determined by solving a linear programming subproblem using the simplex algorithm. Numerical examples showed that the proposed method is efficient and effective in searching for near optimal solutions.     

A Lagrangian relaxation approach to multi-period inventory/distribution planning

We consider a multi-period inventory/distribution planning problem (MPIDP) in a one-warehouse multiretailer distribution system where a fleet of heterogeneous vehicles delivers products from a warehouse to several retailers. The objective of the MPIDP is to minimise transportation costs for product delivery and inventory holding costs at retailers over the planning horizon. In this research, the problem is formulated as a mixed integer linear programme and solved by a Lagrangian relaxation approach. A subgradient optimisation method is employed to obtain lower bounds. We develop a Lagrangian heuristic algorithm to find a good feasible solution of the MPIDP. Computational experiments on randomly generated test problems showed that the suggested algorithm gave relatively good solutions in a reasonable amount of computation time.     

Dynamic lot-sizing with price changes and price-dependent holding costs

This paper proposes a new formulation of the dynamic lot-sizing problem with price changes which considers the unit inventory holding costs in a period as a function of the procurement decisions made in previous periods. In Section 1, the problem is defined and some of its fundamental properties are identified. A dynamic programming approach is developed to solve it when solutions are restricted to sequential extreme flows, and results from location theory are used to derive an O(T²) algorithm which provides a provably optimal solution of an integer linear programming formulation of the general problem. In Section 2, a heuristic is developed for the case where the inventory carrying rates and the order costs are constant, and where the item price can change once during the planning horizon. Permanent price increases, permanent price decreases and temporary price reductions are considered. In Section 3, extensive testing of the various optimal and heuristic algorithms is reported. Our results show that, in this context, the two following intuitive actions usually lead to near optimal solutions: accumulate stock at the lower price just prior to price increase and cut short on orders when a price decrease is imminent.     

Joint rolling-horizon scheduling of materials processing and lot-sizing with sequence-dependent setups

A lot sizing and scheduling problem from a foundry is considered in which key materials are produced and then transformed into many products on a single machine. A mixed integer programming (MIP) model is developed, taking into account sequence-dependent setup costs and times, and then adapted for rolling horizon use. A relax-and-fix (RF) solution heuristic is proposed and computationally tested against a high-performance MIP solver. Three variants of local search are also developed to improve the RF method and tested. Finally the solutions are compared with those currently practiced at the foundry.     

The finite multiple lot sizing problem with interrupted geometric yield and holding costs

We consider the multiple lot sizing problem in production systems with random process yield losses governed by the interrupted geometric (IG) distribution. Our model differs from those of previous researchers which focused on the IG yield in that we consider a finite number of setups and inventory holding costs. This model particularly arises in systems with large demand sizes. The resulting dynamic programming model contains a stage variable (remaining time till due) and a state variable (remaining demand to be filled) and therefore gives considerable difficulty in the derivation of the optimal policy structure and in numerical computation to solve real application problems. We shall investigate the properties of the optimal lot sizes. In particular, we shall show that the optimal lot size is bounded. Furthermore, a dynamic upper bound on the optimal lot size is derived. An O(nD) algorithm for solving the proposed model is provided, where n and D are the two-state variables. Numerical results show that the optimal lot size, as a function of the demand, is not necessarily monotone.     

Multi-item two-echelon spare parts inventory control problem with batch ordering in the central warehouse under compound Poisson demand

We consider a multi-item two-echelon spare part inventory system in which the central warehouse operates under an (nQ,?R) policy and the local warehouses implement order-up-to S policy, each facing a compound Poisson demand. The objective is to find the policy parameters minimizing expected system-wide inventory holding and fixed ordering costs subject to an aggregate mean response time constraint at each warehouse. In this paper, we propose four alternative approximations for the steady state performance of the system; and extend a heuristic and a lower bound proposed under Poisson demand assumption to the compound Poisson setting. In a computational study, we show that the performances of the approximations, the heuristic, and the lower bound are quite satisfactory; and the relative cost saving of setting an aggregate service level rather than individually for each part is quite high.     

A Lagrangean heuristic algorithm for disassembly scheduling with capacity constraints

This paper considers the problem of determining the disassembly schedule (quantity and timing) of products in order to satisfy the demand of their parts or components over a finite planning horizon. The objective is to minimize the sum of set-up, disassembly operation, and inventory holding costs. As an extension of the uncapacitated versions of the problem, we consider the resource capacity restrictions over the planning horizon. An integer program is suggested to describe the problem mathematically, and to solve the problem, a heuristic is developed using a Lagrangean relaxation technique together with a method to find a good feasible solution while considering the trade-offs among different costs. The effectiveness of the algorithm is tested on a number of randomly generated problems and the test results show that the heuristic suggested in this paper can give near optimal solutions within a short amount of computation time.     

The Trended Inventory Lot Sizing Problem with Shortages Under a New Replenishment Policy

In the past few years, considerable attention has been given to the inventory lot sizing problem with trended demand over a fixed horizon. The traditional replenishment policy is to avoid shortages in the last cycle. Each of the remaining cycles starts with a replenishment and inventory is held for a certain period which is followed by a period of shortages. A new replenishment policy is to start each cycle with shortages and after a period of shortages a replenishment should be made. In this paper, we show that this new type of replenishment policy is superior to the traditional one. We further propose four heuristic procedures that follow the new replenishment policy. These are the constant demand approximation method, the equal cycle length heuristic, the extended Silver approach, and the extended least cost solution procedure. We also examine the cost and computation time performances of these heuristic procedures through an empirical study. The number of test problems solved to optimality, average and maximum cost deviation from optimum were used as measures of cost performance. The results of the 10 000 test problems reveal that the extended least cost approach is most cost effective.     

Capacitated Lot Sizing for Injection Moulding: A Case Study

This paper considers the medium-term production smoothing problem for the injection moulding department of a Belgian firm. The problem is formulated as a series of one machine capacitated dynamic lot sizing problems, which are then solved by heuristic procedures. Computational results for real-life data are presented. It follows that the capacitated lot sizing approach succeeds in smoothing production such that subcontracting, which was often necessary with the E.O.Q. approach used by the firm, could be avoided in the future. Moreover, total set-up and inventory costs are reduced by about 20%.     

Modelling and computing (Rn, Sn) policies for inventory systems with non-stationary stochastic demand

This paper addresses the single-item, non-stationary stochastic demand inventory control problem under the non-stationary (R, S) policy. In non-stationary (R, S) policies two sets of control parameters—the review intervals, which are not necessarily equal, and the order-up-to-levels for replenishment periods—are fixed at the beginning of the planning horizon to minimize the expected total cost. It is assumed that the total cost is comprised of fixed ordering costs and proportional direct item, inventory holding and shortage costs. With the common assumption that the actual demand per period is a normally distributed random variable about some forecast value, a certainty equivalent mixed integer linear programming model is developed for computing policy parameters. The model is obtained by means of a piecewise linear approximation to the non-linear terms in the cost function. Numerical examples are provided.