Mechanochemical and solution synthesis, X-ray structure and IR and 31P solid state NMR spectroscopic studies of copper(I) thiocyanate adducts with bulky monodentate tertiary phosphine ligands

A number of adducts of copper(I) thiocyanate with bulky tertiary phosphine ligands, and some nitrogen-base solvates, were synthesized and structurally and spectroscopically characterised. CuSCN:PCy3 (1:2), as crystallized from pyridine, is shown by a single crystal X-ray study to be a one-dimensional polymer ...(Cy3P)2CuSCN(Cy3P)2CuSCN... (1) with the four-coordinate copper atoms linked end-on by S-SCN-N bridging thiocyanate groups. A second form (2), obtained from acetonitrile, was also identified and shown by IR and 31P CPMAS NMR spectroscopy to be mononuclear, with the magnitude of the dν(Cu) parameter measured from the 31P CPMAS and the ν(CN) value from the IR clearly establishing this compound as three-coordinate [(Cy3P)2CuNCS]. Two further CuSCN/PCy3 compounds CuSCN:PCy3 (1:1) (3), and CuSCN:PCy3:py (1:1:1) (4) were also characterized spectroscopically, with the dν(Cu) parameters indicating three- and four-coordinate copper sites, respectively. Attempts to obtain a 1:2 adduct with tri-t-butylphosphine have yielded, from pyridine, the 1:1 adduct as a dimer [(Bu(t)3P)((SCN)(NCS))Cu(PBu(t)3)] (5), while similar attempts with tri-o-tolylphosphine (from acetonitrile and pyridine (= L)) resulted in solvated 1:1:1 CuSCN:P(o-tol)3:L forms as dimeric [{(o-tol)3P}LCu((SCN)(NCS))CuL{P(o-tol)3}] (6 and 8). The solvent-free 1:1 CuSCN:P(o-tol)3 adduct (7), obtained by desolvation of 6, was characterized spectroscopically and dν(Cu) measurements from the 31P CPMAS NMR data are consistent with the decrease in coordination number of the copper atom from four (for 6) (P,N(MeCN)Cu,S,N) to three (for 7) (PCuS,N) upon loss of the acetonitrile of solvation. These results are compared with those previously reported for mononuclear and binuclear PPh3 adducts which demonstrate a clear tendency for the copper centre to remain four-coordinate. The IR spectroscopic measurements on these compounds show that bands in the far-IR spectra provide a much more definitive criterion for distinguishing between bridging and terminal bonding than does an often-used empirical rule based on ν(CN) in the mid-IR, which leads to the wrong conclusion in some cases.     

UV-visible,IR, and 13C NMR studies on CT complexes between some thiohydantoins and molecular diiodine

The reaction of some 5,5-dimethyl-2-thiohydantoin derivatives (X = O, S; R, R′ = H, Me) with molecular diiodine has been studied in CH₂Cl₂ solution by different spectroscopic techniques. The formation constants (K) of the 1 : 1 molecular adducts and their thermodynamic parameters have been measured by UV-visible spectroscopy. The results allow us to point out the different donor properties of C(2) = S thioketonic sulfur between the two series of compounds (X = O, S) and the influence of N(1) and N(3) methylation on the K's. From the analysis of the ν(NH) frequencies, it has been possible to show hydrogen bond interactions between the NH's and the S-bonded iodine; this seems to be an important factor in determining the K values.     

Quantum-chemical calculations of NMR chemical shifts of organic molecules: I. Phosphines,phosphine oxides,and phosphine sulfides

The accuracy in the calculation of ³¹P NMR chemical shifts in the series of the simplest phosphines, phosphine oxides, and phosphine sulfides was estimated in terms of the Hartree-Fock self-consistent final perturbation theory and density functional theory with different basis sets. The best agreement between the calculated and experimental data was achieved at the DFT/B3LYP/IGLO-III level of theory.     

磷化氢与直链烯烃反应的原位^31PNMR研究

本文应用加压原位核磁共振技术,在反应温度50-70℃、反应压力1.0～2.0MPa,氘代苯为溶剂、偶氮二异丁腈为引发剂的条件下,考察了磷化氢与直链烯烃1,4-戊二烯,1,7-辛二烯及1-十八烯的反应.实验结果表明,磷化氢与1,4-戊二烯可以生成6员膦杂环己烷,与1,7-辛二烯不易生成9员膦杂环壬烷,与1-十八烯主要生成伯膦产物.原位^31PNMR谱的研究也表明,磷化氢与直链烯烃反应为串行机理.     

The synthesis of some bidentate ligands containing both phosphine and nitrile groups

Both (C₆H₅)₂P(CH₂)₃CN and (C₆H₅)₂P(CH₂)₄CN have been obtained from the reaction of Br(CH₂)_nCN (n = 3, 4) with (C₆H₅)₂POCH₃ followed by reduction with (C₆H₅)₂SiH₂. These phosphine-nitrile ligands form L₂PdCl₂ complexes which are shown by IR measurements to have trans geometries with the phosphine portions of the ligands coordinated. Reactions of o-BrC₆H₄CN with CH₃(CH₂)₃Li followed by R₂PCl (R = C₆H₅ or (CH₃)₂N) have been used to provide good yields of the corresponding R₂P-o-C₆H₄CN products.     

Temperature-dependent interconversion of phosphoramidite-Cu complexes detected by combined diffusion studies, 31P NMR, and low-temperature NMR spectroscopy

For copper-catalyzed enantioselective conjugate additions, knowledge about the precatalytic and catalytic complexes has not yet been sufficiently developed to understand the strong influence of different temperatures on these famous reactions. Therefore, NMR experiments with four Cu(I) salts and two phosphoramidite ligands have been performed to elucidate the temperature dependence and the low-temperature structures of these copper complexes. The existence of the precatalytic binuclear complex with a mixed trigonal/tetrahedral coordination on copper is for the first time proven with direct NMR spectroscopic methods. Below 200 K, intermolecular interactions between free ligands and [Cu2X2L3] complexes induce binuclear [Cu2X2L4] complexes similar to the crystal structures. By combining diffusion experiments and (31)P integrals at different temperatures, it is for the first time possible to follow the formation of stoichiometrically different complexes, even under experimental conditions in which the (31)P signals of the complexes are spectroscopically not resolved due to exchange processes. This allows a first correlation between the complex species observed and the synthetic conditions reported. Furthermore, different preferences to build homo- or heterochiral complexes are detected for binaphthol and biphenol phosphoramidite complexes.     

Furfuryl-containing tertiary phosphine oxides and polymers based on some of them

The syntheses of dimethyl(furfuryloxymethyl)phosphine oxide (DPO), methylbis(furfuryloxymethyl)phosphine oxide (MPO), tris(furfuryloxymethyl)phosphine oxide (TPO), dimethyl(tetrahydrofurfuryloxymethyl)phosphine oxide (DTPO), methyl-bis(tetrahydrofurfuryloxymethyl)phosphine oxide (MTPO) and tris(tetrahydrofurfuryloxymethyl)phosphine oxide (TTPO) from dimethyl(chloromethyl)phosphine oxide, methyl-bis(chloromethyl)phosphine oxide, tris(chloromethyl)phosphine oxide and the furfuryl and tetrahydrofurfuryl sodium alkoxides via the Williamson reaction are reported. Phosphorus-containing furan polymers with reduced flammability are prepared by polymerizing MPO and TPO using p-toluenesulphonic acid as catalyst. The oxygen indexes of these polymers, as determined by ASTM D-2863, are 35.1 and 33.1% O₂, respectively; for the phosphorus-free polymer from difurfurylidene acetone, it is 23.0% O₂. It is shown that DPO can be used as an efficient fire-retardant for reducing the flammability of a polymer from difurfurylidenacetone.     

Sterically Congested Phosphite Ligands: Synthesis,crystallographic characterization,and observation of unprecedented eight-Bond 31P,31P coupling in the 31P-NMR spectra

The synthesis and characterization of 2-{1-{3,5-bis(1,1-dimethylethyl)-2-{[2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo[d,f][1,3,2]dioxaphosphepin-6-yl]oxy}phenyl}ethyl}-4,6-bis(1,1-dimethylethyl)phenyl diphenyl phosphite ( 6 ) is described. In the ³¹P-NMR spectrum (¹H-decoupled) of 6 , an unprecedented eight-bond P,P coupling of J = 72.8 Hz is observed. In the X-ray crystal structure of 6 , an intramolecular P–P distance of 3.67 Å is found, which is within the sum of the van-der-Waals radii of the P-atoms. The observed intramolecular P–P distance suggests that a through-space coupling mechanism is operative. The solid-state conformation of 6 is compared to the conformation obtained by semi-empirical MO geometry optimizations (PM3 method). The calculated geometry suggests that the solid-state structure is near a true energy minimum, but that crystal-packing forces decrease the intramolecular P–P distance in the solid state. In the absence of crystal-packing forces, however, the collisional and vibrational energy available in solution may lead to the population of states with a shortened intramolecular P–P distance in 6 . The proximity of the P-atoms in 6 is due to restricted conformational freedom resulting from steric congestion within the molecule. The free energy of activation (ΔG* = 10.2 and 10.8 kcal/mol for unequal populations of exchanging conformers) for ring inversion of the dibenzo[d,f][1,3,2]dioxaphosphepin ring in 6 is determined by variable-temperature ³¹P-NMR spectroscopy. Semi-empirical MO calculation on model compounds suggest that the structure of the transition state for ring inversion has the two aryl rings and O-atoms in a common plane, with the P-atom lying above this plane.     

Preparation of hexacoordinated tris(bidentate) phosphorus compounds with 1,3,2-dioxaphosphorinane rings. NMR and X-ray crystallographic studies of their conformation

A series of new unstable tris(bidentate) hexacoordinated phosphorus compounds 1 with 1,3,2-dioxaphosphorinane rings was prepared and studied by NMR and X-ray crystallography. The X-ray crystal structures showed that the 1,3,2-dioxaphosphorinane ring adopts different conformations depending on the number and size of substituents at the carbon atom C14. Substituents are deployed around the phosphorus atom in a slightly deformed octahedral structure. Deviations in bond lengths around the phosphorus atom depend on the character of the bonds and the distribution of the negative charge. (1)H and (13)C NMR measurements showed that in solution the flexibility of 1,3,2-dioxaphosphorinane ring depends on the size of substituents at the carbon C14.     

Silver(I) diethylphosphite — Bonding mode and phosphine co-ordination compounds — a31P NMR study

Summary Silver(I) complexes with the P/O ambidentate phosphito- and phosphinito-ligands are shown to adopt P-bonded structures in solution by means of³¹P n.m.r. spectroscopy.¹J(Ag, P) of AgP(O)(OEt)₂ represents the largest one bond silverphosphorus coupling constant reported so far. AgP(O)(OEt)₂ forms co-ordination complexes of the stoichiometry [Ag{P(O)(OEt)₂}(PBu ₃ ⁿ )_n], n=1, 2 or 3 which were characterized by³¹P n.m.r. spectroscopy.The nomenclature accords with that used in the review of Roundhillet al. ⁽¹⁾.     

X-Ray and 31P CP MAS NMR studies of bis(dialkoxythiophosphoryl) disulfides

The crystal and molecular structures of the title compounds were determined by X-ray diffraction technique from diffractometer intensity measurements. It has been found that two homologous disulfides, bis(dimethoxythiophosphoryl) disulfide 1 and bis(dineopentoxythiophosphoryl) disulfide 2 , form different molecular and crystal structures with space groups C2/c and P&1macr;, respectively. These results were confirmed by ³¹P CP MAS NMR studies, which showed that under favorable conditions the solid state NMR may lead to determination of the number of crystallographically unique phosphorus atoms. Moreover, the variation of the disulfide S–S bond length versus torsional P–S–S–P angles was observed.     

31P NMR studies demonstrating the assembly of catena-phosphorus frameworks from chlorophosphinochlorophosphonium cations

New examples of chlorophosphinochlorophosphonium (4) and chlorophosphinodichlorophosphonium (5) cations have been prepared and spectroscopically characterized. These bifunctional phosphinophosphonium cations offer a new approach to the development of phosphinophosphonium frameworks using reductive coupling reactions and have been exploited as synthons to assemble larger catena-phosphorus cations. The reactions of 4 and 5 with stibine reducing agents have been studied using (31)P NMR spectroscopy and have been shown to produce a variety of new and known frameworks in a facile manner, depending on the reducing agent selection and the stoichiometry of the reaction. New derivatives of frameworks containing three, four, and five phosphorus atoms have been identified by (31)P NMR spectroscopy. Crystals of the [GaCl(4)](-) salt of the five-membered dication 11((i)Pr) have been isolated from the reaction of [4((i)Pr)][GaCl(4)] with SbBu(3), and the solid state structural features and solution state dynamics are comprehensively described in the context of (31)P{(1)H} NMR spectroscopic observations.     

Observation of (31)P-(31)P Indirect Spin-Spin Coupling in Copper-Bis(phosphine) Complexes by Two-Dimensional Solid-State NMR

The first observations of (31)P-(31)P indirect spin-spin (J) coupling in copper(I) phosphine complexes are reported for solid Cu(PPh(3))(2)X (X = NO(3)(-), BH(4)(-)). Values of (2)J((31)P,(31)P), 157 +/- 5 and 140 +/- 5 Hz for Cu(PPh(3))(2)NO(3) and Cu(PPh(3))(2)BH(4), respectively, have been obtained from two-dimensional (2D) J-resolved (31)P NMR spectra obtained under slow magic-angle spinning (MAS) conditions. In both complexes, the two phosphine ligands are crystallographically equivalent; thus, the two (31)P nuclei have identical isotropic chemical shifts. Under rapid sample spinning conditions, the (31)P MAS NMR spectra exhibit relatively sharp overlapping asymmetric quartets arising from (1)J((63/65)Cu,(31)P) and residual (63/65)Cu-(31)P dipolar interactions. No evidence of (2)J((31)P,(31)P) is apparent from the spectra obtained with rapid MAS; however, under slow MAS conditions there is evidence of homonuclear J-recoupling. Peak broadening due to heteronuclear dipolar interactions precludes measurement of (2)J((31)P,(31)P) from standard 1D (31)P MAS NMR spectra. It is shown that this source of broadening can be effectively eliminated by employing the 2D J-resolved experiment. For the two copper(I) phosphine complexes investigated in this study, the peak widths in the f(1) dimension of the 2D J-resolved (31)P MAS NMR spectra are about three times narrower than those found in the corresponding 1D (31)P MAS NMR spectra.     

Synthesis of aurocyanide and auricyanide complexes of phosphines,phosphine sulfides and phosphine selenides,and their characterization by IR,far-IR,UV solution,and solid-state NMR spectroscopic methods

A series of aurocyanide and auricyanide complexes of phosphines, phosphine sulfides, and phosphine selenides were synthesized. These new complexes have the general formula [L _n Au(CN) _m ], where L could be Cy₃P, (2-CN-Et)₃P, Me₃PS, Et₃PS, Ph₃PS, Me₃PSe, or Ph₃PSe. Auricyanide was reacted with L at 1?:?2 ratio. Products were characterized using elemental analysis, melting point, UV, IR, far-IR solution, and solid-state NMR spectroscopy. Phosphine ligands cause gold(III) reduction to gold(I); less redox tendency was found for phosphine sulfides and phosphine selenides. Tri-coordinate complexes [L₂AuCN] were produced from phosphine ligands with gold-tetracyanide. IR and UV spectroscopic methods were used to identify gold oxidation state in the synthesized complexes.     

Structural and 31P NMR solution studies on some cyclic triphosphenium ions and their 2‐arsa‐analogues

Several new cyclic triphosphenium ions and their 2‐arsa‐analogues have been identified in solution by ³¹P NMR spectroscopy. The crystal and molecular structures of the cations 1a,b , as their hexachlorostannate (IV) salts have shown that the five membered heterocyclic rings are planar, whereas the cation 9b as its diphosphanedioxide‐bis[pentachlorostannate(IV)] salt is nonplanar, like its saturated phosphorus counterpart. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:501–510, 2001     

Theoretical studies of 31P NMR spectral properties of phosphanes and related compounds in solution

Selected theoretical methods, basis sets and solvation models have been tested in their ability to predict (31)P NMR chemical shifts of large phosphorous-containing molecular systems in solution. The most efficient strategy was found to involve NMR shift calculations at the GIAO-MPW1K/6-311++G(2d,2p)//MPW1K/6-31G(d) level in combination with a dual solvation model including the explicit consideration of single solvent molecules and a continuum (PCM) solvation model. For larger systems it has also been established that reliable (31)P shift predictions require Boltzmann averaging over all accessible conformations in solution.     

P and C NMR investigation of the system tetracarbonyldi-μ-chlorodirhodium(I) — tertiary phosphine

¹³C and ³¹P{¹H} NMR data at low temperature prompted us to characterize cis-[Rh(CO)₂(PR₃)Cl] (3) (3a, PR₃ = PPh₃; 3b, PR₃ = PMe₂Ph), as surprisingly stable products of the reaction between [{Rh(CO)₂(μ-Cl)}₂] (1) and tertiary phosphines in toluene (P : Rh = 1). Every attempt to isolate solid 3a led to the cis- and trans- halide-bridged dimers [{Rh(CO)₂(μ-Cl)}₂] (5a) and 6a which are formed from 3a by slow decarbonylation, a process which is greatly accelerated by the evaporation of the solvent under vacuum.

The analogous reaction of 1 with dimethylphenylphosphine follows a similar pathway; in this case, however, low temperature NMR spectra allowed us to characterize the pentacoordinated dinuclear species [{Rh(CO)₂(μ-Cl)}₂] (2b) as the unstable intermediate of the bridge-splitting process.

The reaction of 3 with a second equivalent of phosphine (P : Rh = 2) leads, at room temperature, to the well known product trans-[Rh(CO)(PR₃)₂Cl] (8) accompanied by evolution of CO; however our data show that when the reaction is performed at 200 K, decarbonylation is prevented and spectroscopic evidence of trigonal bipyramidal pentacoordinate [Rh(CO)₂(PR₃)₂Cl] (7), stable only at low temperature, can be obtained.     

The 1H, 13C and 31P NMR spectra of EZ pairs of some phosphorus substituted alkenes

The olefins Ph₂P(X)CH?CHR [X=lone pair, O, S, Ch₃I; R?Ch₃, ph, P(X)ph₂] have been prepared and their ¹H, ¹³C and ³¹P NMR spectra measured. trans ³J[P(IV)C] (range 18.3–25.7 Hz) is greater than cis ³J[P(IV)C] (range 6.9–11 Hz) but this relationship does not hold for P(III) compounds. In the ³¹P spectra the E isomer absorbs to higher field than the Z isomer for P(III) and P(IV) compounds. The ¹H data are in accord with previous results; average substituent shielding coefficients for ph₂P(X) substituted alkenes are reported.