The transport of Cu(II) through a sulfonated styrene/divinylbenzene copolymer membrane

The transport of copper (II) ions through sulfonated styrene/divinylbenzene copolymer ion permeable membranes under Donnan dialysis conditions has been investigated. The flux increases strongly with the copper (II) ion concentration and temperature. The other cation transported through the membrane and its concentration can also have some influence but it is relatively small.     

Synthesis and dyeing properties of new disazo disperse dyes for polyester and nylon fabrics

Diazotized aryl amines were coupled with two stenhouse salt namely, N-(5-phenylamino-penta-4-ol-2,4-diene-1-ylidene)anilines hydrochloride [S₁ (RH) or S₂ (ROH)] to furnish two series of disazo disperse dyes (S₁D_1–10 and S₂D_1–10). The structure of all the dyes was established by estimating number of azo groups, elemental analysis and spectral studies (IR, ¹H-NMR, UV/Visible). The structure–property relationship was discussed by using electronic absorption spectra of the dyes. These dyes were applied to polyester and nylon fabrics as disperse dyes by using temperature exhaust dyeing method. The relevant dyeing characteristics, such as dyeability on fabrics, wash-fastness and light-fastness were evaluated. Fabrics dyed with these dyes furnished generally deep and bright intense hues ranging from light yellow to orange to reddish brown. The color fastness of the dyed fabric was assessed by determining wash-fastness and light-fastness properties.     

Intrinsic styrene/maleic anhydride copolymer foam; a new green foaming technology

DSM has developed a new foaming technology based on carbon dioxide released via a controlled chemical reaction through catalyzed decarboxylation of SMA, a copolymer of Styrene (S) and maleic anhydride (MA). This carbon dioxide is thus used as an environmentally friendly blowing agent to generate intrinsically foamed SMA-based materials. The modulus of the foam exceeds by far (factor of 2–3) the modulus of common thermoplastic foams based on e.g. PS. The tensile strength is also higher (10%). This opens up many opportunities for SMA foams in structural applications. One example is roofliners. SMA has also been successfully applied as a chemical blowing agent (e.g. in combination with ABS) for the production of a high-density foam on an injection moulding machine or an extruder. In this paper the chemical background, processing, properties and some applications of intrinsically foamed SMA will be discussed.     

Viscoelasticity of a butadiene–styrene block copolymer

A commercial elastomeric block copolymer of butadiene (B) with styrene (A) is studied. A single chain of the material has the formula A-B-A. Differential thermal analysis studies show the presence of two transitions. The lower transformation temperature corresponds to the T_g of the butadiene chain segments, and the upper transformation temperature corresponds to the T_g of the styrene chain segments. The upper transition of the material is also studied by following the variation of the torsional modulus with temperature. This transition is found to be quite unusual. Our experiments show that the upper transformation of unstressed block copolymer samples is broad. The transition sharpens for samples which, prior to the modulus–temperature experiments, are stress-relaxed at high elongations. These observations (and those of the literature) suggest that the styrene and butadiene chain segments in the block copolymer aggregate in the solid state and give rise to two distinct transition phenomena. Our studies of the upper transformation suggest that stretching of the bulk material enhances the aggregation of the styrene chain segments. Pure polystyrene (A) blocks of the material are recovered by selective cleavage and fractionation experiments. The T_g of the pure polystyrene blocks is found to be similar to the value of the upper transition temperature of the copolymer. The ABA blocks copolymer is found also to undergo a stress-softening phenomenon analogous to that of reinforced rubber.     

Miniemulsion polymerization of styrene with a block copolymer surfactant

A series of miniemulsion systems based on styrene/azobisisobutyronitrile in the presence of poly(methyl methacrylate‐b‐2‐(dimethylamino)ethyl methacrylate) as a surfactant and hexadecane (HD) as a cosurfactant were developed. For comparison, a series of pseudoconventional emulsions also were carried out with the same procedure used for the aforementioned series but without the cosurfactant (HD). Both the droplet size and shelf life were also measured. Experimental results indicate that it is possible to slow the effect of Ostwald ripening and thereby produce a stable miniemulsion with the block copolymer as the surfactant and HD as the cosurfactant. In addition, the extent to which varying the surfactant concentration and copolymer composition could affect both the polymer particle size during the polymerization and the polymerization rate was examined. Variation in the polymer particle sizes during polymerization indicates that droplet and aqueous (micellar or both homogeneous) nucleation occurs in the miniemulsion polymerization. With the same concentration of the surfactant used in the miniemulsion polymerization, the polymerization rates of systems with M₁₂B₃₆ are faster than those of systems with M₁₂B₁₂. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1818–1827, 2000     

Silicone nanomicelle dyeing method on polyester fibre: Comparative evaluation of chemical properties,fastness properties,and DFT

Disperse Red 177(9a), Disperse Red 343(9b), Disperse Blue 165(9c), Disperse Blue 165.1(9d), Disperse Blue 366(9e), and Disperse Blue 148(9f) were examined in the solvent. During silicon nanomicelle dyeing, we employed 9(a–f) azo disperse dyes on polyester. On polyester fabric, dye 9(a–f) offers equal washing, light, and rubbing fastness in both the conventional and silicone nanomicelle techniques. The dye can now be transported directly into the fibre core without the use of auxiliary dyes owing to the reduction in the particle size of azo dyes, which is made possible by nanoemulsions superior dispersion. The levelling property of the dispersed dye is enhanced by the dyeing process. When both techniques are applied, the lightfastness properties of all dyes are improved. It provides a very good to outstanding protection factor for textile materials. These 9(a–f) azo disperse dyes have moderate to outstanding photostability, net electrophilicity index, and lightfastness.     

Copolymerization of ethylene and styrene to a nearly-alternating crystalline copolymer

An almost alternating stereoregular copolymer can be obtained by copolymerizing ethylene and styrene with the catalyst ethylenebis(1-indenyl)zirconium dichloride activated by methylaluminoxane at −25°C. The regular microstructure pointed out by the NMR spectrum allows the copolymer to crystallize as shown by calorimetric and X-ray diffraction measurements.     

Biobased vinyl levulinate as styrene replacement for unsaturated polyester resins

Vinyl levulinate (VL) is used as a biobased reactive diluent in styrene (St)‐free unsaturated polyester resins (UPR). The reactivity ratios for the radical copolymerization of VL with diethyl fumarate (DEF) are determined by the Jaacks method (r_VL = 0.01 and r_DEF = 0.81 at 60 °C in DMSO‐d₆). The properties of UPRs having a stoichiometric ratio between unsaturated groups from the UPR and either St or VL are compared. Defect‐free, slightly yellow, transparent, and rigid thermosets are obtained after a mild curing cycle. Due to unfavorable reactivity ratios about 5.5 wt % of unpolymerized VL remains inside the network and acts as plasticizer. Consequently, compared with St‐based ones, VL‐based UPRs exhibit lower α relaxation (T_α = 180 and 100 °C, respectively), lower elastic moduli at the rubbery plateau (G′ = 10⁸ and 10⁷ Pa) and lower mechanical properties as measured by three points bending tests. Strain at break (ε_f = 1.8 ± 0.2%) and Charpy impact strength (～2.7 ± 0.3 kJ m^?2) are comparable independently of the RD chemical nature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3356–3364     

Cylindrical inclusions in a copolymer membrane

The membrane-mediated interaction between two parallel, cylindrical inclusions is investigated by using the self-consistent field theory (SCFT). The rodlike inclusions are located within the interior of the bilayer and are enveloped by two monolayers. They may exhibit one of the two basic types of behaviors involving pinching two monolayers together and swelling them outward. For different parameters, we calculate the density profile of the deformation membrane, the associated interaction free energy, as well as the conformational entropy of polymer chains. The similarity of the two types of interaction potentials is the qualitative characteristics. An energy barrier separates an attractive from a repulsive region; the repulsive region is preceded by a weak attraction at a large distance. The difference between them, which is due to the different contact environments around the rods, lies in the appearance of a small barrier at a short distance in the pinching structure. Particular emphasis is put on the closely energetic and entropic analyses of the interaction potential. We show that the chemical potential energy has provided a qualitative trend and roughly dominated the basic shape of the interaction potential; the amphiphile entropy in the swelling structure and the solvent entropy in the pinching structure, combined with the corresponding chemical potential energy, are responsible for the repulsive barrier at an intermediate distance and for the weak attraction at a large distance, respectively. The influence of inclusion hydrophobicity on the interaction potential is taken into account. In particular, the pinching and swelling structures can appear and can transform into each other in a system at intermediate hydrophobicity.     

Synthesis and antibacterial activity of azodispersed dyes incorporating a phthalazinedione moiety for dyeing polyester fabrics

Abstract  

3-(1,4-Dioxo-3,4,4a,5,10,10a-hexahydro-1H-5,10-benzenobenzo[g]phthalazin-2-yl)-3-oxopropionitrile and 3-(1,4-dioxo-3,4,4a,5,10,10a-hexahydro-1H-5,10-benzenobenzo[g]phthalazin-2-yl)-3-oxo-2-(5-oxo-3-phenylthiazolidin-2-ylidene)propionitrile were coupled with various diazotized aryl amines in pyridine to give the corresponding aryl hydrazonopropionitriles. Some of the dyes produced were applied to polyester as disperse dyes, and their antibacterial, color, and fastness properties were evaluated.     

Synthesis of a novel centipede-like copolymer of styrene and methyl methacrylate

A well-defined,A2B-type,centipede-like copolymer of styrene and methyl methacrylate(PS-PS-PMMA) was synthesized by the combination of living anionic polymerization and atom transfer radical polym-erization(ATRP) . The synthetic approach involves the coupling reaction of polystyrene(PS) backbone bearing 1,1-diphenylethene(DPE) pendant groups,produced by ATRP and Wittig reaction,with living polystyryllithium(PSLi) ,and subsequent polymerization of the resulting 1,1-diphenylmethyl anions with methy methacrylate. The centipede-like copolymer was characterized by 1H NMR,IR,SEC,SLS,and DSC measurements.     

Development of new dyeing photoinitiators based on benzylideneimidazopyridine dyes

Several dyes containing benzylideneimidazopyridine moiety (BIPDs) were synthesized and evaluated as photoinitiators for free‐radical polymerization induced with the visible emission of an argon‐ion laser. One method of dye structure change was applied in our study. The modification was based on the character of the substituent introduced into both the imidazopyridine skeleton and phenyl ring. Several different groups were tested including heavy atoms (? CI, ? Br) as well as electron‐accepting (? NO₂), and electron‐donating groups [? N(CH₃)₂, ? OCH₃]. Analysis of the dye properties demonstrated that there is a significant heavy atom effect on the photoinitiation ability of the novel dyes in both cases, for example, when a heavy atom is introduced into the phenyl ring as well as into the imidazopyridine part of the molecule. The introduction of an electron‐acceptor or electron‐donor group into the phenyl part of the dye caused a dramatic decrease in its photosensitivity. The type of applied counterion had no effect on the overall sensitivity of a dye. BIPDs are not particularly good photoinitiators. Further modification of the dye structure involved the elimination of the motion of a C?C bond by the coplanarization of the styrylium residue with other parts of the dye. This approach decreased the degree of branching of the dye, which stabilized the molecule in its excited state. The formed dye, quinoline[2,3‐b]‐2,3‐dihydro‐1H‐imidazo[1,2‐a]pyridinium bromide (QDIPB), exhibited dramatically enhanced sensitivity. QDIPB possessed broad structured spectra with a long‐wavelength part shifted to the blue as compared to other BIPD dyes. The change of the absorption spectra and its high photoinitiation ability makes QDIPB a good candidate for the photoinitiating system applied in dental restorative materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3048–3055, 2003     

Synthesis of some 4-arylazo-3-hydroxythiophene disperse dyes for dyeing polyester fabrics

A series of novel 4-arylazo-3-hydroxythiophene disperse dyes was synthesized by heterocyclization of ethyl 2-arylhydrazono-2-phenylthiocarbamoyl acetates with a variety of α-halogenated reagents. The structures of the synthesized dyes were confirmed by UV-Vis, IR, ¹H NMR, and MS spectroscopic techniques and elemental analysis. The dyes were applied to conventional polyester fabric by high temperature exhaust dyeing. These dyes were found to give orange to reddish-violet shades with very good depth, levelness, and brightness on polyester fabric. The dyed fabric showed moderate to good light fastness and very good fastness to washing and perspiration. Also the position of color in CIELAB coordinates (L^*, a^*, b^*, H^*, and C^*) was assessed.     

Synthesis of some 4-arylazo-3-hydroxythiophene disperse dyes for dyeing polyester fabrics

A series of novel 4-arylazo-3-hydroxythiophene disperse dyes was synthesized by heterocyclization of ethyl 2-arylhydrazono-2-phenylthiocarbamoyl acetates with a variety of α-halogenated reagents. The structures of the synthesized dyes were confirmed by UV-Vis, IR, ¹H NMR, and MS spectroscopic techniques and elemental analysis. The dyes were applied to conventional polyester fabric by high temperature exhaust dyeing. These dyes were found to give orange to reddish-violet shades with very good depth, levelness, and brightness on polyester fabric. The dyed fabric showed moderate to good light fastness and very good fastness to washing and perspiration. Also the position of color in CIELAB coordinates (L^*, a^*, b^*, H^*, and C^*) was assessed. Correspondence: Ehab Abdel-Latif, Department of Chemistry, Faculty of Science, Mansoura University, 35516 Mansoura, Egypt     

Surface engineering of styrene/PEGylated‐fluoroalkyl styrene block copolymer thin films

A series of diblock copolymers prepared from styrenic monomers was synthesized using atom transfer radical polymerization. One block was derived from styrene, whereas the second block was prepared from a styrene modified with an amphiphilic PEGylated‐fluoroalkyl side chain. The surface properties of the resulting polymer films were carefully characterized using dynamic contact angle, XPS, and NEXAFS measurements. The polymer morphology was investigated using atomic force microscope and GISAXS studies. The block copolymers possess surfaces dominated by the fluorinated unit in the dry state and a distinct phase separated microstructure in the thin film. The microstructure of these polymers is strongly influenced by the thin film structure in which it is investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 267–284, 2009     

An efficient nanofiltration membrane based on blending of polyethersulfone with modified (styrene/maleic anhydride) copolymer

In this study, styrene–maleic anhydride (SMA) copolymer was modified by ring opening reaction of its anhydride groups with diethanolamine (DEA). The modified SMA copolymer was blended in different concentrations (2.5, 4 and 5.5 %) with Polyethersulfone (PES) to improve the hydrophilicity of PES membranes and the corresponding blend membrane was prepared through phase inversion. The influence of SMA copolymer on morphology, mechanical properties, water flux, rejection and anti-fouling properties of blend membrane were investigated. The modified SMA and their composition were confirmed by FT-IR and ¹HNMR techniques. The asymmetric structure of membrane was revealed by SEM. The water flux and contact angle results show that the hydrophilicity of membrane surface was increased by addition of SMA copolymer. The better anti-fouling properties of the PES/modified SMA blend membranes in comparison with the PES membrane also confirmed that the hydrophilicity of blend membrane enhances.     

Phase separation conditions for solutions of styrene copolymer with elastomer in a mixture of two monomers

This paper is concerned with incompatibility in the system styrene copolymer-elastomer-mixture of two monomers and its dependence on elastomer concentration and on composition of the styrene copolymers. At higher concentrations of SBR and of MMA in MS copolymers, there is less compatibility of MS and SBR polymers in SBR-MS-St + MMA systems. The compatibility of SBR and MS in St + MMA solutions is generally greater than for SBR and SAN in St + AN solutions. The compatibility of SBR-SAN-St + AN systems is less affected by concentrations of SBR and of AN in SAN than the compatibility of SBR-MS-St + MMA systems on the concentrations of SBR and of MMA in MS.