Electron excitation coefficients of neutral and ionic levels of krypton in Townsend discharges

In this paper, we present experimental results for excitation coefficients of krypton atoms to several Kr and Kr⁺ excited levels for E/N (electric field to gas particle number density ratio usually in units of Townsend, 1 Td = 10^− 21 V m²) values from 7 × 10^− 20 V m² to above 1 × 10^− 17 V m². The data have been obtained in two different parallel plate self-sustained Townsend discharge drift tubes. The spatial distribution of the emission intensities were recorded and then normalized to give excitation coefficients at the anode, by using the electron flux at this point. The values of these coefficients are placed on an absolute scale by using a standard tungsten ribbon lamp calibrated against a primary blackbody radiation standard. The ionization rates at different E/N are obtained from the spatial emission profiles.The data for atomic krypton levels 2p₂, 2p₃, 2p₅, 2p₆, 2p₇, 2p₈, 3p₅ and 3p₆ (in Paschen notation) were converted to excitation coefficients by using quenching coefficients from the literature. The emission coefficients of eight 4s²4p⁴ (³P)5p levels of Kr⁺ have also been measured for E/N values from about 1 × 10^− 18 V m² up to nearly 8 × 10^− 18 V m².     

Diffusion of ferrocene methanol in super-cooled aqueous solutions using cylindrical microelectrodes

The diffusion of ferrocene methanol in super-cooled aqueous solutions containing sucrose has been studied, using disk and cylindrical microelectrodes, over a wide viscosity range. The solution viscosity and the reduced temperature T/T_g (T_g being the glass transition temperature) were varied by changing the sucrose concentration and the temperature of the system. The voltammetric limiting current obtained with a disk microelectrode and the i(t) response on a cylindrical microelectrode after a potential step were used to determine diffusion coefficients from 7 × 10⁻⁶ cm² s⁻¹ down to 2 × 10⁻¹¹ cm² s⁻¹. The electrochemical procedure described in this work allows a simple and accurate measurement of the dynamics of electroactive solutes in glass-forming liquids.     

Kinetics of the diazotization and azo coupling reactions of procaine in the micellar media

The kinetics of the diazotization reaction of procaine in the presence of anionic micelles of sodium dodecyl sulfate (SDS) and cationic micelles of cetyltrimethyl ammonium bromide (CTAB), dodecyltrimethyl ammonium bromide (DDTAB) and tetradecyltrimethyl ammonium bromide (TDTAB) were carried out spectrophotometrically at λ_max = 289 nm. The values of the pseudo first order rate constant were found to be linearly dependent upon the [NaNO₂] in the concentration range of 1.0 × 10⁻³ mol dm⁻³ to 12.0 × 10⁻³ mol dm⁻³ in the presence of 2.0 × 10⁻² mol dm⁻³ acetic acid. The concentration of procaine was kept constant at 6.50 × 10⁻⁵ mol dm⁻³. The addition of the cationic surfactants increased the reaction rate and gave plateau like curve. The addition of SDS micelles to the reactants initially increased the rate of reaction and gave maximum like curve. The maximum value of the rate constant was found to be 9.44 × 10⁻³ s⁻¹ at 2.00 × 10⁻³ mol dm⁻³ SDS concentration. The azo coupling of diazonium ion with β-naphthol (at λ_max = 488) nm was found to linearly dependent upon [ProcN₂⁺] in the presence of both the cationic micelles (CTAB, DDTAB and TDTAB) and anionic micelles (SDS). Both the cationic and anionic micelles inhibited the rate of reactions. The kinetic results in the presence of micelles are explained using the Berezin pseudophase model. This model was also used to determine the kinetic parameters e.g. k_m, K_s from the observed results of the variation of rate constant at different [surfactants].     

Simultaneous determination of acetaminophen,dopamine and ascorbic acid using a PbS nanoparticles Schiff base-modified carbon paste electrode

A highly sensitive method was investigated for the simultaneous determination of acetaminophen (AC), dopamine (DA), and ascorbic acid (AA) using a PbS nanoparticles Schiff base-modified carbon paste electrode (PSNSB/CPE). Differential pulse voltammetry peak currents of AC, DA and AA increased linearly with their concentrations within the ranges of 3.30 × 10⁻⁸–1.58 × 10⁻⁴ M, 5.0 × 10⁻⁸–1.2 × 10⁻⁴ M and 2.50 × 10⁻⁶–1.05 × 10⁻³ M, respectively, and the detection limits for AC, DA and AA were 5.36 × 10⁻⁹, 2.45 × 10⁻⁹ and 1.86 × 10⁻⁸ M, respectively. The peak potentials recorded in a phosphate buffer solution (PBS) of pH 4.6 were 0.672, 0.390, and 0.168 V (vs Ag/AgCl) for AC, DA and AA, respectively. The modified electrode was used for the determination of AC, DA, and AA simultaneously in real and synthetic samples.     

Photo-induced degradation of some flavins in aqueous solution

The blue-light induced photo-degradation of FMN, FAD, riboflavin, lumiflavin, and lumichrome in aqueous solution at pH 8 is studied by measurement of absorption coefficient spectral changes due to continuous excitation at 428 nm. The quantum yields of photo-degradation determined are ϕ_D(riboflavin, pH 8) ≈ 7.8 × 10⁻³, ϕ_D(FMN, pH 5.6) ≈ 7.3 × 10⁻³, ϕ_D(FMN, pH 8) ≈ 4.6 × 10⁻³, ϕ_D(FAD, pH 8) ≈ 3.7 × 10⁻⁴, ϕ_D(lumichrome, pH 8) ≈ 1.8 × 10⁻⁴, and ϕ_D(lumiflavin, pH 8) ⩽ 1.1 × 10⁻⁵. In a mass-spectroscopic analysis, the photo-products of FMN dissolved in water (solution pH is 5.6) were identified to be lumichrome and the lumiflavin derivatives dihydroxymethyllumiflavin, formyllumiflavin, and lumiflavin-hydroxy-acetaldehyde. An absorption and emission spectroscopic characterisation of the primary photoproducts of FMN at pH 8 is carried out.     

Determination of resveratrol in red wine by solid phase extraction-flow injection chemiluminescence method

A sensitive flow injection chemiluminescence method has been developed for the detection of resveratrol in red wine based on the fact that resveratrol can greatly enhance chemiluminescence reaction between KMnO_4 and HCHO in sulfuric acid medium. Analytes were pre-concentrated on solid sorbents (C_(18) solid-phase extraction cartridges).Under the optimum conditions,the proposed method allows the measurement of resveratrol over the range of 1.32×10~(-8) to 1.32×10~(-5) mol/L with a detection limit of 3.30×10~(-9) mol/L,and the relative standard deviation for 1.32×10~(-5) mol/L resveratrol (n=11) is 3.8%.This method has been successfully applied for the determination of the resveratrol in red wine.Furthermore,the possible reaction mechanism was also discussed.     

A self-assembled monolayer based electrochemical immunosensor for detection of leukemia K562A cells

A novel strategy to quantify the cell number of leukemia K562A cells using electrochemical immunosensor was developed by effective surface immunoreaction between P-glycoprotein (P-gp) on cell membrane and P-gp mouse monoclonal antibody bound on an epoxysilane monolayer modified glassy carbon electrode. The surface morphologies of the epoxysilane monolayer and the bound antibodies were studied with atomic force microscopy. The binding of target K562A cells onto the immobilized antibodies increased the electron-transfer impedance of electrochemical probe, which depended linearly on the cell concentration in the range of 5.0 × 10⁴–1.0 × 10⁷ cells mL⁻¹. The detection limit of the immunosensor was 7.1 × 10³ cells mL⁻¹. The proposed strategy showed acceptable reproducibility with an RSD of 3.4% for the linear slope and good precision with the RSD of 3.7% and 3.0% examined at the cell concentrations of 2.0 × 10⁶ and 1.0 × 10⁷ cells mL⁻¹.     

Enhanced mass transfer during solid–liquid extraction of gamma-irradiated red beetroot

The exposure to gamma-irradiation pretreatment increases cell wall permeabilization, resulting in loss of turgor pressure, which led to the increase of extractability of betanin from red beetroot. The degree of extraction of betanin was investigated using gamma irradiation as a pretreatment prior to the solid–liquid extraction process and compared with control beetroot samples. The beetroot subjected to different doses of gamma irradiation (2.5, 5.0, 7.5, 10.0 kGy) and control was dipped in an acetic acid medium (1% v/v) to extract the betanin. The diffusion coefficients for betanin as well as ionic component were estimated considering Fickian diffusion. The results indicated an increase in the diffusion coefficient of betanin (0.302×10⁻⁹–0.463×10⁻⁹ m²/s) and ionic component (0.248×10⁻⁹–0.453×10⁻⁹ m²/s) as the dose rate increased (from 2.5 to 10.0 kGy). The degradation constant was found to increase (0.050–0.079 min⁻¹) with an increase gamma-irradiation doses (2.5–10.0 kGy), indicating lower stability of the betanin as compared to control sample at 65 °C.     

Selective determination of uric acid with DNA doped polymers modified carbon fiber microelectrode

New biocomposite materials, based on the incorporation of DNA doped p-aminobenzensulfonic acid, was fabricated by electrochemical method. A carbon fiber microelectrode modified by this thin film was fabricated for selective determination of uric acid (UA) in the presence of a larger amount of ascorbic acid (AA). It was found that the voltammetric oxidation peak separation between UA and AA is about 260 mV at the modified electrode. A linear response of the peak current versus the concentration was found in the range of 8 × 10⁻⁷–6 × 10⁻⁴ M with correlation coefficient of 0.9991 and the detection limit was 5 × 10⁻⁷ M (s/n = 3) at the 5 × 10⁻⁴ M AA. The presence of high concentration AA did not interference the determination. The electropolymerized film was characterized by SEM techniques. The modified electrode shows good sensitivity, selectivity and stability.     

Synthesis,characterizations of silica-coated gold nanorods and its applications in electroanalysis of hemoglobin

Gold nanorods (GNRs) were synthesized by a seed–mediated growth approach followed by TEOS polymerization leading to the formation of silica layer surrounding the gold nanorod core. TEM images showed that the silica-coated gold nanorods (GNRs@SiO₂) were dispersed with an average aspect ratio of 3.1 for the GNRs cores and a uniform thickness of the silica shell. The core/shell nanocomposites were further used as efficient supports for the immobilization of hemoglobin (Hb) to fabricate a novel biosensor. The immobilized Hb showed an enhanced electron transfer for its heme Fe(III) to Fe(II) redox couple. This biosensor showed an excellent bioelectrocatalytic activity towards H₂O₂ with a linear range from 8.0 × 10⁻⁷ to 6.1 × 10⁻⁵ M, and the detection limit was 6.0 × 10⁻⁸ M at 3σ. The apparent Michaelis–Menten constant of the immobilized hemoglobin was calculated to be 0.13 mM.     

The determination of cysteine at Bi-powder carbon paste electrodes by cathodic stripping voltammetry

The determination of cysteine by means of square wave cathodic stripping voltammetry (SWCSV) is reported here for the first time at Bi-modified carbon paste electrodes (CPEs). The modified electrodes are 17% w/w metallic Bi powder mixed with CP (Bi-CPEs) and the technique is based on the enhancement of Bi surface oxidation in the presence of cysteine at a carefully chosen accumulation potential and the subsequent reduction-stripping of the product (proposed to be bismuth(III) cysteinate) by potential scanning to more negative values. The wide concentration range of 1 × 10⁻⁶–5 × 10⁻⁵ M for cysteine can be assessed by SWCSV using Bi-CPEs and, by appropriate choice of accumulation times, two linear response concentration regimes could be identified: 1 × 10⁻⁶–1 × 10⁻⁵ M (accumulation for 600 s) and 1 × 10⁻⁵–5 × 10⁻⁵ M (accumulation for 100 s), with estimated detection limits of 3 × 10⁻⁷ and 2 × 10⁻⁶ M, respectively.     

Thermodynamic and isotherm studies of the biosorption of Cu(II), Pb(II), and Zn(II) by leaves of saltbush (Atriplex canescens)

The Freundlich and Langmuir isotherms were used to describe the biosorption of Cu(II), Pb(II), and Zn(II) onto the saltbush leaves biomass at 297 K and pH 5.0. The correlation coefficients (R²) obtained from the Freundlich model were 0.9798, 0.9575, and 0.9963 for Cu, Pb, and Zn, respectively, while for the Langmuir model the R² values for the same metals were 0.0001, 0.1380, and 0.0088, respectively. This suggests that saltbush leaves biomass sorbed the three metals following the Freundlich model (R² > 0.9575). The K_F values obtained from the Freundlich model (175.5 · 10⁻², 10.5 · 10⁻², and 6.32 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively), suggest that the metal binding affinity was in the order Pb > Zn > Cu. The experimental values of the maximal adsorption capacities of saltbush leaves biomass were 0.13 · 10⁻², 0.05 · 10⁻², and 0.107 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively. The negative ΔG^∘ values for Pb and the positive values for Cu and Zn indicate that the Pb biosorption by saltbush biomass was a spontaneous process.     

Conformational properties of the bisphenol-A polycarbonate using the RMMC method

The conformational properties of the bisphenol-A polycarbonate (PC) were studied using the rotational-isomeric-state metropolis Monte Carlo (RMMC) simulations adopting a polymer consistent forcefield (pcff). The conformations of a single PC chain were generated at theta condition in a wide range of molar mass. When the maximum bond number for non-bonded interactions is set to 5, the conformation corresponds to the unperturbed state. The probability that the dihedral bond pairs of diphenyl propane (DPP) groups exist at two minima of energy where the bond angles are (50.5, 50.5) and (−49.5, 129.5) is 3.4×10⁻⁴ at 300 K. The probability of the trans–trans form of diphenyl carbonate (DPC) groups is 6.3×10⁻⁴ at 300 K, and is reduced to 2.1×10⁻⁴ as temperature increases to 600 K. The limiting unperturbed dimension in terms of mean-square end-to-end distance over molar mass (〈r²〉/M) is 1.01 Å² mol/g. From intrinsic viscosity calculated with the radius of gyration (S), it was found that the gyration or the conformation of the PC chain at 300 K is closer to that of dilute solutions in chloroform at 293 K or in p-dioxane at 303 K than in tetrahydrofuran (THF) solution at 297 K. In future studies, the conformation obtained from the RMMC method here will be used as an initial structure to perform the molecular dynamics simulation in order to investigate interfacial properties of the PC bulk.     

Radiation-induced degradation of aqueous 2,3-dihydroxynaphthalene

The degradation of aqueous 2,3-dihydroxynaphthaline (2,3-DHN) under the influence of γ-ray was investigated under various experimental conditions. Using 2.5×10⁻⁵ mol L⁻¹ 2,3-DHN in aerated media (pH=6–6.8) an initial degradation yield, G_i-(2,3-DHN)=0.32 was obtained, whereas in solutions saturated with N₂O the yield come to G_i-(2,3-DHN)=0.50.In airfree media the substrate decomposition was negligible. Possible reaction mechanisms are presented.Further, the rate constant, k(OH+2,3-DHN)=2.14×10¹⁰ L mol⁻¹ s⁻¹ was determined by competition reactions with PNDA.     

Simultaneous determination of ascorbic acid,epinephrine, and uric acid by differential pulse voltammetry using poly(p-xylenolsulfonephthalein) modified glassy carbon electrode

A novel poly(p-xylenolsulfonephthalein) modified glassy carbon electrode was prepared for the simultaneous determination of ascorbic acid (AA), epinephrine (EP) and uric acid (UA). Cyclic voltammetric, chronoamperometric, and differential pulse voltammetric methods were used to investigate the modified electrode for the electrocatalytic oxidation of EP, AA, and UA in aqueous solutions. The separation of the oxidation peak potentials for AA–EP and EP–UA was about 200 and 130 mV, respectively. The calibration curves obtained for AA, EP, and UA were in the ranges of 10–1343, 2–390, and 0.1–560 μmol L⁻¹, respectively. The detection limits (S/N = 3) were 4, 0.1, and 0.08 μmol L⁻¹ for AA, EP and UA, respectively. The diffusion coefficient and the catalytic rate constant for the oxidation of EP at the modified electrode were calculated as 1.40(±0.10) × 10⁻⁴ cm² s⁻¹ and 1.06 × 10³ mol⁻¹ L s⁻¹, respectively. The present method was applied to the determination of EP in pharmaceutical and urine samples, AA in commercially available vitamin C tablet, and EP plus UA in urine samples.     

Microstructural modifications in swift ion irradiated PET

Polyethylene terephthalte (PET) was irradiated with carbon (70 MeV) and copper (120 MeV) ions to analyze the induced modifications with respect to optical, structural and thermal properties. In the present investigation, the fluence for carbon irradiation was varied from 1×10¹¹ to 1×10¹⁴ ions cm⁻², while that for copper beam was kept in the range of 1×10¹¹ to 1×10¹³ ions cm⁻². UV–vis, FTIR, XRD and DSC techniques were utilized to study the induced changes. The analysis of UV–vis absorption studies reveals that there is decrease of optical energy gap up to 10% on carbon ion irradiation (at 1×10¹⁴ ions cm⁻²), whereas the copper beam (at 1×10¹³ ions cm⁻²) leads to a decrease of 49%. FTIR analysis indicated the formation of alkyne end groups along with the overall degradation of polymer with copper ion irradiation. X-ray diffraction analysis revealed that the semi-crystalline PET losses its crystallinity on swift ion irradiation. It was found that the carbon beam (1×10¹⁴ ions cm⁻²) decreased the crystallite size by 16% whereas this decrease is of 12% in case of the copper ion irradiated PET at 1×10¹³ ions cm⁻². The loss in crystallinity on irradiation has been supported by DSC thermograms.     

Determination of nitrite with the electrocatalytic property to the oxidation of nitrite on thionine modified aligned carbon nanotubes

A thionine modified aligned carbon nanotubes (ACNTs) electrode was fabricated and was used to electrochemically determine nitrite. The thionine modified ACNTs electrode exhibited enhanced electrocatalytic behavior to the oxidation of nitrite. The electrochemical mechanism of the thionine/ACNTs electrode towards the oxidation of nitrite was discussed. The thionine modified ACNTs electrode exhibited fast response towards nitrite with a detection limit of 1.12 × 10⁻⁶ mol  L⁻¹ and a linear range of 3 × 10⁻⁶ – 5 × 10⁻⁴ mol  L⁻¹. The proposed method was successfully applied in the detection of nitrite in real samples.     

Ab initio calculations and mechanism of two proton migration reactions of ethoxy radical

We present a direct ab initio and density functional theory dynamics study of the thermal rate constants of the two H-migration reactions of C₂H₅O radical. MPW1K/6-31+G(d,p) methods were employed to optimize the geometries of all stationary points and to calculate the minimum energy path (MEP). The energies of all the stationary points were refined at the QCISD(T)/aug-cc-pVTZ level of theory. The thermal gas phase rate constants were evaluated based on the energetics from the QCISD(T)/aug-cc-pVTZ//MPW1K/6-31+G(d,p) level of theory using both microcanonical variational transition state theory (μVT) and canonical variational transition state theory (CVT) with the Eckart tunneling correction in the temperature range of 200–2500 K. The extended Arrhenius expression fitted from the μVT/Eckart rate constants of 1,2 H-shift and 1,3 H-shift reactions of C₂H₅O radical in the temperature range of 200–2500 K are k = 3.90 × 10⁻³¹T^12.4e^{(−2.13 × 103/T)} and k = 2.83 × 10⁻²⁹T^11.9e^{(−2.24 × 103/T)} s⁻¹, respectively. The two isomerization rate constants exhibited positive temperature dependence in the calculated temperature region. The variational effects for the two isomerizations of ethoxy radical are small and the tunneling effects are important in the low temperature range. The titled reactions are minor and not essential compared to the decomposition pathways of ethoxy radical.     

A time-resolved study of the multiphase chemistry of excited carbonyls: Imidazole-2-carboxaldehyde and halides

Imidazole-2-carboxaldehyde (IC) reactivity in the presence of halide anions (Cl^–, Br^–, I^–) has been studied by laser flash photolysis in aqueous solution at room temperature. The absorption spectrum of the triplet state of IC has been measured with a maximum absorption at 330 nm and a weaker absorption band around 650 nm. Iodide anions proved to be efficient quenchers of the triplet state IC, with a rate coefficient k_q of (5.33 ± 0.25) × 10⁹ M⁻¹ s⁻¹. Quenching by bromide and chloride anions was less efficient, with k_q values of (6.27 ± 0.53) × 10⁶ M⁻¹ s⁻¹ and (1.31 ± 0.16) × 10⁵ M⁻¹ s⁻¹, respectively. The halide (X^–) quenches the triplet state; the resulting transient absorption feature matches that of the corresponding radical anion (X₂^–). We suggest that this type of quenching reactions is a driving force of oxidation reactions in the oceanic surface microlayer (SML) and a source of halogen atoms in the atmosphere.     

Strontium(II) selective PVC membrane electrode based acetophenone semicarbazone (ACS) as an ionophore

A new PVC membrane based strontium(II) ion-selective electrode has been constructed using acetophenone semicarbazone as a neutral carrier. The sensor exhibits a Nerstian response for strontium(II) ion over a wide concentration range 1.0 × 10⁻²–1.0 × 10⁻⁷ M with the slope of 29.4 mV/per decade. The limit of detection was 2.7 × 10⁻⁸ M. It was relatively fast response time (<10 s for concentration ⩾1.0 × 10⁻³ and <15 s for concentration of ⩾1.0 × 10⁻⁶ M) and can be used for 8 months without any considerable divergence in potentials. The proposed sensor revealed relatively good selectivity and high sensitivity for strontium(II) over a mono, di, trivalent cation and can be used in a pH range of 2.5–10.5. It was also successfully used as an indicator electrode in potentiometer titration and in the analysis of concentration in various real samples.