Interfacially synthesized thin film composite RO membranes for seawater desalination

A composite RO membrane with high salt rejection and high flux for the desalination of seawater was prepared by treating a porous polysulfone (PS) support sequentially with a di-amine and then with a polyfunctional acid chloride, thereby forming a thin film of polyamide (PA) on the PS support. In order to establish conditions for the development of suitable thin film composite (TFC) membranes on a coating machine, various parametric studies were carried out which included varying the concentration of reactants, reaction time, curing temperature and curing time for thin film formation by the interfacial polymerization technique. By suitable combination of these factors,a desired thin film of polyamide with improved performance for seawater desalination could be obtained. Moreover, the product water fluxes were considerably enhanced by post-treatment of the TFC membrane. Continuous sheets of TFCs were developed on the mechanical coating unit and tested for RO performance in a plate-and-frame configuration with synthetic seawater. The performance of these composite membranes was also determined for the separation of organics and compared with cellulose acetate (CA) membranes.     

反渗透过程中双壁碳纳米管通水阻盐性能的分子动力学模拟

采用分子动力学模拟方法, 探究了非常规双壁碳纳米管(DWCNT)在反渗透过程中, 不同内外管间距对管道内水分子与盐离子运动行为的影响. 本文采用0.5 mol·L^-1氯化钠水溶液模拟海水, 内管始终采用CNT(8,8)型, 并对盐水层施加恒力模拟反渗透压. 重点考察盐离子数量分布与通水情况, 计算水分子平均力势, 并分析水分子氢键寿命与偶极矩分布. 结果表明, 管间距不仅影响上述各项性质, 还会改变盐离子与水分子在碳管中的渗透特性. 模拟结果显示, 小尺寸DWCNT可以有效实现盐水分离但水通量较小, 大尺寸DWCNT的水容量较大但阻盐效率不高, 而中尺寸DWCNT (即: 管间距为0.815 nm)则具有最佳的通水阻盐性能. 本文试图从分子层面揭示了DWCNT通水阻盐机理, 并为人们设计新型海水淡化渗透膜提供理论指导.     

Water desalination across functionalized silicon carbide nanosheet membranes: insights from molecular simulations

Desalination of seawater can be an effective way to access drinking water. In this study, the performance of functionalized silicon carbide nanosheet (SiCNS) membranes for water desalination was investigated using molecular dynamics (MD) simulations. For this purpose, four types of membranes with various functionalized pores were considered to investigate their capabilities in water desalination. The chemical functions of fluorine (–F) (system S1), hydrogen (–H) (systems S2 and S3), and hydrogen (–H) and hydroxyl (–OH) (system S4) were bonded to the pore edge of the SiCNS membranes. Also, the effect of the number of pores in the membrane on the water permeability was studied between systems S2 and S3. The SiCNS membrane was placed at the center of the simulation box and the external pressure was applied to the system in the range of 10–100 MPa. The water permeability, salt rejection, potential of mean force of ions, water density, water density map, and radial distribution function (RDF) of water molecules were calculated in this work. The results demonstrated that the water permeability increases by adding hydrophilic chemical functions such as –F and –OH on the pore edge.

     

PEG-coated reverse osmosis membranes: Desalination properties and fouling resistance

This study focuses on the use of surface-coated reverse osmosis (RO) membranes to reduce membrane fouling in produced water purification. A series of crosslinked PEG-based hydrogels were synthesized using poly(ethylene glycol) diacrylate as the crosslinker and poly(ethylene glycol) acrylate, 2-hydroxyethyl acrylate, or acrylic acid as comonomers. The hydrogels were highly water permeable, with water permeabilities ranging from 10.0 to 17.8 (L μm)/(m² h bar). The hydrogels were applied to a commercial RO membrane (AG brackish water RO membrane from GE Water and Process Technologies). The water flux of coated membranes and a series-resistance model were used to estimate coating thickness; the coatings were approximately 2 μm thick. NaCl rejection for both uncoated and coated membranes was 99.0% or greater, and coating the membranes appeared to increase salt rejection, in contrast to predictions from the series-resistance model. Zeta potential measurements showed a small reduction in the negative charge of coated membranes relative to uncoated RO membranes. Model oil/water emulsions were used to probe membrane fouling. Emulsions were prepared with either a cationic or an anionic surfactant. Surfactant charge played a significant role in membrane fouling even in the absence of oil. A cationic surfactant, dodecyltrimethyl ammonium bromide (DTAB), caused a strong decline in water flux while an anionic surfactant, sodium dodecyl sulfate (SDS), resulted in little or no flux decline. In the presence of DTAB, the AG RO membrane water flux immediately dropped to 30% of its initial value, but in the presence of SDS, its water flux gradually decreased to 74% of its initial value after 24 h. DTAB-fouled membranes had lower salt rejection than membranes not exposed to DTAB. In contrast, SDS-fouled membranes had higher salt rejection than membranes not exposed to SDS, with rejection values increasing, in some cases, from 99.0 to 99.8% or higher. In both surfactant tests, coated membranes exhibited less flux decline than uncoated AG RO membranes. Additionally, coated membranes experienced little fouling in the presence of an oil/water emulsion prepared from DTAB and n-decane. For example, after 24 h the water flux of the AG RO membrane fell to 26% of its initial value, while the water flux of a PEGDA-coated AG RO membrane was 73% of its initial value.     

Fluorine-functionalized nanoporous graphene as an effective membrane for water desalination

Most water in the world is as saline water in seas and oceans. Desalination technology is a promising method to solve the global water crisis. Recently, many attentions have been paid to the graphene-based membranes in water desalination due to their low production cost and high efficiency. In this paper, molecular dynamics simulations are employed to investigate the effect of functionalized graphene nanosheet (GNS) membranes on the performance of salt separation from seawater in terms of water permeability and salt rejection. For this purpose, the hydrogenated (–H) and fluorinated (–F) pores were created on the GNS membrane. Then, the functionalized graphene membrane was placed in the middle of the simulation box in an aqueous ionic solution containing Na⁺ and Cl^? ions. The applied pressure (in the range of 10–100 MPa) was used as the driving force for transport of water molecules across the reverse osmosis (RO) graphene-based membrane in order to obtain the water permeability and salt rejection. Also, radial distribution functions (RDFs) of ion–water and water–water as well as the water density map around the membrane were obtained. The results indicated that the hydrophilic chemical functions such as fluorine (–F) can improve the water permeability at low pressures.

     

Influence of Substitutional Defects in ZIF-8 Membranes on Reverse Osmosis Desalination: A Molecular Dynamics Study

In this study, molecular dynamics simulation is used to investigate the effects of water-based substitutional defects in zeolitic imidazolate frameworks (ZIF)-8 membranes on their reverse osmosis (RO) desalination performance. ZIF-8 unit cells containing up to three defect sites are used to construct the membranes. These substitutional defects can either be Zn defects or linker defects. The RO desalination performance of the membranes is assessed in terms of the water flux and ion rejection rate. The effects of defects on the interactions between the ZIF-8 membranes and NaCl are investigated and explained with respect to the radial distribution function (RDF) and ion density distribution. The results show that ion adsorption on the membranes occurs at either the nitrogen atoms or the defect sites. Complete NaCl rejection can be achieved by introducing defects to change the size of the pores. It has also been discovered that the presence of linker defects increases membrane hydrophilicity. Overall, molecular dynamics simulations have been used in this study to show that water-based substitutional defects in a ZIF-8 structure reduce the water flux and influence its hydrophilicity and ion adsorption performance, which is useful in predicting the type and number of defect sites per unit cell required for RO applications. Of the seven ZIF-8 structures tested, pristine ZIF-8 exhibits the best RO desalination performance.     

Hydrophobic modification of poly(phthalazinone ether sulfone ketone) hollow fiber membrane for vacuum membrane distillation

New hydrophobic poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber composite membranes coated with silicone rubber and with sol–gel polytrifluoropropylsiloxane were obtained by surface-coated modification method. The effects of coating time, coating temperature and the concentration of silicone rubber solution on the vacuum membrane distillation (VMD) properties of silicone rubber coated membranes were investigated. It was found that high water permeate flux could be gotten in low temperature and low concentration of silicone rubber solution. When the coating temperature is 60 °C, the coating time is 9 h and the concentration of silicone rubber solution is 5 g L⁻¹ the water permeate flux of the silicone rubber coated membrane is 3.5 L m⁻² h⁻¹. The prepolymerization time influence the performance of polytrifluoropropylsiloxane coated membranes, and higher prepolymerization time decrease the water permeate flux of the membrane. The water permeate flux and the salt rejection was 3.7 L m⁻² h⁻¹ and 94.6%, respectively in 30 min prepolymerization period. The VMD performances of two composite membranes during long-term operation were studied, and the results indicated that the VMD performances of two composite membranes are quite stable. The salt rejection of silicone rubber coated membrane decreased from 99 to 95% and the water permeate flux fluctuated between 2.0 and 2.5 L m⁻² h⁻¹. The salt rejection of polytrifluoropropylsiloxane coated membrane decreased from 98 to 94% and the water permeate flux fluctuated in 1 L m⁻² h⁻¹ range.     

Investigating the effect of PEG200 and two-dimensional h-BN on PVDF membrane performance for membrane distillation–crystallization

Although water supplies are prominently dependent on desalination technology, desalination plant facing severe issues of discharged brine concentrate. Membrane distillation crystallization is an emerging synergistic technology that resolves the issue of brine concentrate by recovering clean water and value-added minerals simultaneously. In the present study, properties of polyvinylidene fluoride (PVDF) membrane were modified by incorporation of exfoliated fillers of hexagonal boron nitride and polyethylene glycol. The changes in morphology, surface roughness, hydrophobicity, thermal stability, and chemical composition of the prepared membranes were evaluated by scanning electron microscopy, atomic force microscopy, contact angle, thermogravimetric analysis, Fourier-transform infrared spectroscopy, respectively. Membrane distillation crystallization experiments were conducted to observe the effect of modified membranes on the permeate flux and salts recovery at different feed temperatures. The results showed a significant improvement in the permeate flux with modified membranes compared with pure PVDF membrane. It was found that hexagonal boron nitride/polyethylene glycol200 incorporated PVDF membrane gave the higher permeate flux (3.41 kg/m² h for K₂SO₄ and 2.62 kg/m² h for KNO₃) at a temperature of 80 °C along with higher salts recovery than pure PVDF membranes. A 100 h long run test was conducted on modified membranes, which showed consistency in permeate flux with a marginal increase in conductivity.     

Ion-containing reverse osmosis membranes obtained by radiation grafting method

Cationic membranes obtained by radiation grafting of acqueous acrylic acid onto low density polyethylene films followed by alkaline treatment to confer ionic character in the graft chains, were tested for reverse osmosis desalination of saline water. Selected physical properties of such membranes were investigated. The grafted membranes prossess good mechanical and electrical properties. Water uptake for the alkali-treated membrane was much higher than that of the alkali-untreated one. The effect of operation time, degree of grafting, applied pressure and feed concentration on the water flux and salt rejection for the grafted membranes was investigated. Such cationic membranes showed good durability, thermal and chemical stability, acceptable water flux and salt rejection which may make them acceptable for practical use in reverse osmosis desalination of sea water.     

Performance enhancement of thin‐film composite membranes in water desalination process by wood sawdust

In this study, polysulfone/wood sawdust (PSf/WSD) mixed matrix membrane (MMM) was prepared as a novel substrate layer of thin‐film composite (TFC) membrane in water desalination. The main aim was to evaluate how different amounts of WSD (0‐5 wt%) and PSf concentrations (12‐16 wt%) in the porous substrate affect the properties of the final TFC membranes in the separation of organic and inorganic compounds. Morphological and wettability studies demonstrated that the addition of small amount of WSD (less than or equal to 1 wt%) in the casting solution resulted in more porous but similar hydrophobic substrates, while high loading (greater than or equal to 2 wt%) of WSD not only changed the substrate wettability and morphology but also increased and decreased the swelling and mechanical properties of substrate layer. Therefore, PA layer formed thereon displayed extensively varying film morphology, interfacial properties, and separation performance. Based on approximately stable permeate flux (ASPF) and apparent salt rejection efficiency (ASRE), the best TFC membrane was prepared over the substrate with 12 to 14 wt% of PSf and around 0.5 to 1 wt% of WSD. Although notable improvements in permeate flux were obtained by adding a small amount of sawdust, the results clearly indicate that the salt rejection mechanism of TFC membrane was different from the glycerin rejection mechanism. Furthermore, durability results of TFC membranes showed that in continuous operation for 30 days, TFC‐14/0.5 and TFC‐14/01 have the maximum plateau levels of stable permeate flux and salt rejection among the all TFC membranes.     

Preparation of thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules

A new concept for the preparation of thin-film-composite (TFC) reverse osmosis (RO) membrane by interfacial polymerization on porous polysulfone (PS) support using novel additives is reported. Hydrophilic surface modifying macromolecules (LSMM) were synthesized both ex situ by conventional method (cLSMM), and in situ within the organic solvent of the TFC system (iLSMM). The effects of these LSMMs on the fouling of the TFC RO membranes used in the desalination processes were studied. FTIR results indicated that both cLSMM and iLSMM were present in the active layer of the TFC membranes. SEM micrographs depicted that heterogeneity of the surface increases for TFC membranes compared to the control PS membrane, and that higher concentrations of LSMM provided smoother surface. AFM characteristic data presented that the surface roughness of the skin surface increases for TFC membranes compared to the control. The RO performance results showed that the addition of the cLSMM significantly decreased the salt rejection of the membrane and slightly reduced the flux, while in the case of the iLSMM, salt rejection was improved but the flux declined at different rates for different iLSMM concentrations. The membrane prepared by the iLSMM exhibited less flux decay over an extended operational period.     

Experimental study of desalination using direct contact membrane distillation: a new approach to flux enhancement

New membrane distillation configurations and a new membrane module were investigated to improve water desalination. The performances of three hydrophobic microporous membranes were evaluated under vacuum enhanced direct contact membrane distillation (DCMD) with a turbulent flow regime and with a feed water temperature of only 40 °C. The new configurations provide reduced temperature polarization effects due to better mixing and increased mass transport of water due to higher permeability through the membrane and due to a total pressure gradient across the membrane. Comparison with previously reported results in the literature reveals that mass transport of water vapors is substantially improved with the new approach. The performance of the new configuration was investigated with both NaCl and synthetic sea salt feed solutions. Salt rejection was greater than 99.9% in almost all cases. Salt concentrations in the feed stream had only a minor effect on water flux. The economic aspects of the enhanced DCMD process are briefly discussed and comparisons are made with the reverse osmosis (RO) process for desalination.     

Reverse osmosis filtration for space mission wastewater: membrane properties and operating conditions

Reverse osmosis (RO) is a compact process that has potential for the removal of ionic and organic pollutants for recycling space mission wastewater. Seven candidate RO membranes were compared using a batch stirred cell to determine the membrane flux and the solute rejection for synthetic space mission wastewaters. Even though the urea molecule is larger than ions such as Na+, Cl-, and NH4+, the rejection of urea is lower. This indicates that the chemical interaction between solutes and the membrane is more important than the size exclusion effect. Low pressure reverse osmosis (LPRO) membranes appear to be most desirable because of their high permeate flux and rejection. Solute rejection is dependent on the shear rate, indicating the importance of concentration polarization. A simple transport model based on the solution-diffusion model incorporating concentration polarization is used to interpret the experimental results and predict rejection over a range of operating conditions. Grant numbers: NAG 9-1053.     

Biofouling Potential Reductions Using a Membrane Hybrid System as a Pre-treatment to Seawater Reverse Osmosis

Biofouling on reverse osmosis (RO) membranes is the most serious problem which affects desalination process efficiency and increases operation cost. The biofouling cannot be effectively removed by the conventional pre-treatment traditionally used in desalination plants. Hybrid membrane systems coupling the adsorption and/or coagulation with low-pressure membranes can be a sustainable pre-treatment in reducing membrane fouling and at the same time improving the feed water quality to the seawater reverse osmosis. The addition of powder activated carbon (PAC) of 1.5 g/L into submerged membrane system could help to remove significant amount of both hydrophobic compounds (81.4%) and hydrophilic compounds (73.3%). When this submerged membrane adsorption hybrid system (SMAHS) was combined with FeCl(3) coagulation of 0.5 mg of Fe(3+)/L, dissolved organic carbon removal efficiency was excellent even with lower dose of PAC (0.5 g/L). Detailed microbial studies conducted with the SMAHS and the submerged membrane coagulation-adsorption hybrid system (SMCAHS) showed that these hybrid systems can significantly remove the total bacteria which contain also live cells. As a result, microbial adenosine triphosphate (ATP) as well as total ATP concentrations in treated seawater and foulants was considerably decreased. The bacteria number in feed water prior to RO reduced from 5.10E(+06) cells/mL to 3.10E(+03) cells/mL and 9.30E(+03) cells/mL after SMAHS and SMCAHS were applied as pre-treatment, respectively. These led to a significant reduction of assimilable organic carbon (AOC) by 10.1 μg/L acetate-C when SMCAHS was used as a pre-treatment after 45-h RO operation. In this study, AOC method was modified to measure the growth of bacteria in seawater by using the Pseudomonas P.60 strain.     

Ion transport modelling through nanofiltration membranes

The aim of this work is to study the transport mechanism of ions through nanofiltration membranes. A model based on extended Nernst–Planck and film theory equations is reported. This model can be characterized by three transport parameters: the water permeability L_p, the salt transmittance Φ and the effective salt transfer coefficient K_eff. The knowledge of the feed and permeate concentration and of the permeate volumetric flux enable us to calculate these transport parameters. The model is used to estimate cadmium salts rejection by a NANOMAX 50 membrane. Experimental and calculated results are shown to be in good agreement. The model is then successfully extended to experimental data reported in the literature.     

Electrochemical Determination of Boric Acid Using the Boric Acid–Tiron Complexation System

For monitoring the boron concentration in reverse osmosis (RO) water produced by desalination plants, a voltammetric determination method for the amount of electrochemically inactive boron has been developed by using the complexation with 4,5‐dihydroxybenzene‐1,3‐disulfonic acid (Tiron). Cyclic voltammetric measurements showed the oxidation peak of boric acid–Tiron 1 : 1 complex at 920 mV. This peak was successfully applied to the determination of boron in RO water with the LOD of 0.1 mg B dm^?3 by using differential pulse voltammetry. The redox and acid–dissociation behaviors of Tiron and its boron complex are found to depend on the properties of pH buffer reagent.     

添加共试剂改善聚酰胺复合反渗透膜的性能

将N,N′-二甲基乙酰胺(DMAc)作为共试剂添加在间苯二胺水溶液中参与界面聚合反应, 以改善聚酰胺复合反渗透膜(PA-RO-x, x代表添加DMAc的质量分数)的性能. X射线光电子能谱(XPS)和衰减全反射傅里叶红外光谱(ATR-FTIR)分析表明, 随着DMAc含量的增加, 复合膜结构中交联聚酰胺含量相对于线性羧基部分有所增加; 场发射扫描电子显微镜(FE-SEM)和原子力显微镜(AFM)表征结果显示, 随着DMAc含量的增加, 膜表面的粗糙程度逐渐增大; 静态水接触角测试结果表明, 添加DMAc后, 膜的亲水性增强. 结合上述测试结果发现, 添加DMAc可以有效降低水油两相的不相溶性, 提高水相中间苯二胺向正己烷中扩散的速率, 这有助于加快间苯二胺与均苯三甲酰氯反应; 同时, 聚酰胺结构中交联酰胺含量的增加可以提供更多的氢键位点, 有助于水分子快速渗透通过复合膜而不损失截盐率; 膜表面的粗糙程度变大, 有助于提高水通量. 在2 g/L的氯化钠溶液和1.6 MPa测试压力条件下, PA-RO-5.2(DMAc添加质量分数为5.2%)的渗透通量和截盐率分别为66.1 L/(m²·h)和98.7%, 与未添加DMAc的聚酰胺复合反渗透膜相比, 通量增加115%, 截盐率仅下降0.9%.     

Fouling of reverse osmosis and nanofiltration membranes by humic acid—Effects of solution composition and hydrodynamic conditions

Fouling of reverse osmosis (RO) and nanofiltration (NF) membranes by humic acid, a recalcitrant natural organic matter (NOM), was systematically investigated. The membrane flux performance depended on both hydrodynamic conditions (flux and cross-flow velocity) and solution composition (humic acid concentration, pH, ionic strength, and calcium concentration), and was largely independent of virgin membrane properties. While increasing humic acid concentration and ionic strength, and lowering cross-flow velocity affected flux performance moderately, severe flux reduction occurred at high initial flux, low pH, and high calcium concentration. At a calcium concentration of 1 mM, all the membranes exhibited an identical stable flux, independent of their respective intrinsic membrane permeabilities. The effect of solution composition was more significant at higher fluxes. Improved salt rejection was observed as a result of humic acid fouling, which was likely due to Donnan exclusion by humic material close to membrane surfaces. Greater rejection improvement was observed for membranes with rougher surfaces.     

Exploring the characteristics,performance, and modification of Matrimid for development of thin‐film composite and thin‐film nanocomposite reverse osmosis membranes

Reverse osmosis (RO) membrane technology is widely employed to address the demands for freshwater. In this study, fabrication and performance evaluation of customized RO membranes comprised of Matrimid and polyacrylonitrile (PAN) is carried out. While exploring adoption of slip coating procedure, the effects of various modification techniques including incorporation of TiO₂ nanoparticles and polyethylene glycol (PEG) into the skin layer as well as cross‐linking were investigated. The individual and combined effects of parameters on membrane morphology, surface characteristics and performance were also examined. Despite the distinctive characteristics of involved materials, delamination‐free composite membranes were successfully formed with an intimate contact at the interface of two layers. The results also indicated that increasing concentration of Matrimid in dope solution led to increase in membrane thickness and consequently decline in water flux. In the best case, membrane prepared using 1 wt.% Matrimid in dope exhibited water flux of 0.98 LMH and NaCl rejection of 95.7%. Also, incorporation of 3 wt.% TiO₂ nanoparticles offered membranes with improved water flux of 1.37 LMH and salt rejection of 95.8%. On the other hand, water flux and salt rejection in membranes containing 5 wt.% PEG were 1.18 LMH and 96.2%, respectively. The co‐presence of both nanoparticles and PEG provided more insights about the contributing factors in tuned membranes. Modification of skin layer by cross‐linking significantly improved salt rejection at the expense of water flux. The results are scientifically interpreted and compared to the values reported in literature.     

Enhanced single strand breaks of supercoiled DNA in a matrix of gold nanotubes under X-ray irradiation

This work shows for the first time the potential of cobalt oxide silica (CoO(x)Si) membranes for desalination of brackish (1 wt.% NaCl), seawater (3.5 wt.% NaCl) and brine (7.5-15 wt.% NaCl) concentrations at feed temperatures between 25 and 75 °C. CoO(x)Si xerogels were synthesised via a sol-gel method including TEOS, cobalt nitrate hydrate and peroxide. Initial hydrothermal exposure (<2 days) of xerogels prepared with various pH (3-6) resulted in densification of the xerogel via condensation reactions within the silica matrix, with the xerogel synthesised at pH 5 the most resistant. Subsequent exposure was not found to significantly alter the pore structure of the xerogels, suggesting they were hydrostable and that the pore sizes remained at molecular sieving dimensions. Membranes were then synthesised using identical sol-gel conditions to the xerogel samples and testing showed that elevated feed temperatures resulted in increased water fluxes, whilst increasing the saline feed concentration resulted in decreased water fluxes. The maximum flux observed was 1.8 kg m(-2) h(-1) at 75 °C for a 1 wt.% NaCl feed concentration. The salt rejection was consistently in excess of 99%, independent of either the testing temperature or salt feed concentration.