Thermal behavior of the mixed composition xSb2O3–(1 − x)Bi2O3–6(NH4)2HPO4

The study of the system xSb₂O₃–(1 ? x)Bi₂O₃–6(NH₄)₂HPO₄ has been carried out to identify the phases and simulate the mechanisms of their formation, using the technique of thermal analysis in association with X-ray diffractometry. The main stages observed during thermal treatment of the samples include: (1) elimination of water and ammonia leading to the formation of (NH₄)₅P₃O₁₀; (2) reaction of the latter with M ₂ ^III O₃ and the formation of acidic polyphosphates M ₂ ^III H₂P₃O₁₀; (3) their dehydration with the formation of the polyphosphates M^III(PO₃)₃. Then Sb(PO₃)₃ decomposes giving SbPO₄ and P₂O₅. In the presence of excessive P₂O₅, two moles of Bi(PO₃)₃ condensate into oxophosphates Bi₂P₄O₁₃ and BiP₅O₁₄. The data of thermal analysis match with the composition of intermediate and final products. The hygroscopicity of the samples diminishes with growing bismuth content.     

Ag2CO3/Bi2O2CO3光催化剂的p-n异质结构筑及活性研究

采用先后沉淀法制备了Ag₂CO₃/Bi₂O₂CO₃(BOC)复合光催化剂. 扫描电子显微镜和透射电子显微镜表征结果表明, 尺寸为8.0~18.5 nm的Ag₂CO₃颗粒均匀分散于BOC纳米片表面. 两种半导体之间所形成的良好p-n异质界面效应拓宽了BOC的光吸收范围, 并有效促进了光生电子-空穴对的分离. Ag₂CO₃/BOC复合光催化剂的催化活性明显提高, 其中Ag₂CO₃含量(质量分数)为0.62%时活性最佳, 降解罗丹明B的速率常数为纯BOC的2.8倍. 结合催化过程中的活性物种研究和两种半导体的相对能带位置, 提出了p-n异质界面空间电荷层的形成以及载流子分离和迁移机制.     

The (100) orientation evolution and temperature-dependent electrical properties of Bi(Zn1/2Ti1/2)O3–PbTiO3 ferroelectric films

The 0.2Bi(Zn_1/2Ti_1/2)O₃–0.8PbTiO₃ (0.2BZT–0.8PT) ferroelectric thin film was successfully fabricated on Pt(111)/Ti/SiO₂/Si substrates by a sol–gel method. The result indicates that the film exhibits the (100) preferred orientation and has a relatively dense and uniform microstructure with a thickness of ~230 nm. The formation mechanism of the oriented films was ascribed to the growth of the (100) oriented PbO layer at ~450 °C during a layer-by-layer crystallization process. Temperature-dependent electrical properties of the 0.2BZT–0.8PT films were investigated, showing that the film has a potential for high temperature applications.     

K3[Fe3.26V0.74(OH)O(PO4)4(H2O)2]·2H2O: a synthetic leucophosphite

A new iron(III)/vanadium(III) phosphate, K₃[Fe_3.26V_0.74(OH)O(PO₄)₄(H₂O)₂]·2H₂O (1), has been obtained by hydrothermal synthesis and characterized by single crystal X-ray diffraction, Scanning electron microscopy–energy dispersive X-ray spectroscopy, Inductively coupled plasma atomic emission spectroscopy (ICP), thermogravimetric analysis, and FTIR spectroscopy. Single crystal X-ray diffraction reveals a 3D open framework (monoclinic, space group P2₁/n, a?=?9.6391(7)?Å, b?=?9.8063(7)?Å, c?=?9.7268(7)?Å, β?=?100.71(1)°, and V?=?903.38(11)?ų). This structure presents Fe^III and V^III in a 4.4?:?1?M ratio with the metal ions in two different crystallographic sites. Both metallic centers have distorted octahedral environments, linked by PO₄ tetrahedra, forming channels along the a-axis. The asymmetric unit of K₃[Fe_3.26V_0.74(OH)O(PO₄)₄(H₂O)₂]·2H₂O presents a {M₄(OH)O(PO₄)₄(H₂O)₂}^3? anionic entity, charge balanced by three K⁺, which are located within the channels. It is also possible to distinguish M₄O₂ units whose M^III polyhedra are linked by vertex and edges.     

Effect of TiO2 and SrO additions on some physical properties of 33Na2O–xSrO–xTiO2–(50 − 2x)B2O3–17P2O5 glasses

By means of the conventional quenching route, the glass series 33Na₂O–xSrO–xTiO₂–(50 ? 2x)B₂O₃–17P₂O₅ (x = 0–12.5 mol%) were prepared. The amorphous state of samples was verified by X-ray diffraction (XRD). Density, molar volume, micro-hardness, glass transition temperature (T _g), and crystallization temperature (T _c) parameters are determined for each glass. The results show that they depend strongly on the chemical compositions. The structure approach of the glasses is determined by Infrared spectroscopy (IR). This investigation highlights that the glassy-matrix contains various phosphate and borate structural units. The crystallization of the high-TiO₂ glasses by heat-treatments favors the formation of titanate phosphate Na₄TiO(PO₄)₂ or Sr_0.5Ti₂(PO₄)₃ along with Sr₃(PO₄)₂ inside the glass-matrix.     

Synthesis of an aluminum nitride–yttria (AlN–Y2O3) composite from nano-sized porous AlN and YCl3

In order to enhance the thermal conductivity of aluminum nitride (AlN) with sintering additives including yttria (Y₂O₃), it is necessary to form yttrium aluminate garnet (YAG) and secondary phases both within and around the boundaries of AIN drains. Nano-sized porous AlN particles were produced to form YAG and secondary phases within AlN grains, after which a AlN–Y₂O₃ nano–nano composite was formed from AlN and amorphous Y₂O₃. Porous AlN powders were first successfully synthesized by the chemical vapor synthesis (CVS) method. Highly crystalline and nano-sized porous AlN powders were synthesized at 1,200 °C. Brunauer–Emmett–Teller (BET) analysis showed that these powders had very large surface areas, suggesting that the particles approached nano-scale sizes with very small pores. To form composites of Y₂O₃ and AlN, we prepared a yttrium source solution that infiltrated the nano-sized pores of the AlN particles. Such an infiltration of AlN with amorphous Y₂O₃ was expected to effectively reduce the residual oxygen content by facilitating the formation of YAG and secondary phases during the sintering process. We characterized the composite powders of AlN–Y₂O₃ and the sintered bodies using BET, XRD, SEM, TEM, and thermal conductivity analyses.

     

Oxygen isotope exchange and electrical conductivity of CaZr1–x Sc x O3–x/2

Journal of Solid State Electrochemistry - The effect of scandium content in CaZr1–x Sc x O3–x/2 on electrical conductivity and oxygen exchange kinetics was investigated. The electrical...     

Synthesis, physical–chemical, and catalytic properties of mixed compositions Ag/H3PMo12O40/SiO2

Deposited catalysts composition H₃PMo₁₂O₄₀/SiO₂ and Ag/H₃PMo₁₂O₄₀/SiO₂ have been synthesized on the basis of fumed silica, including milling technique. Physical–chemical characteristics of prepared catalysts have been studied by means of XRD, DTA-TG, FTIR, UV–Vis spectroscopy, and adsorption of nitrogen. Catalysts possess meso- or meso-macroporous structure and contain deposited Keggin heteropolycompounds. Deposition of heteropolycompounds on support with high specific surface area results in increase of selectivity to epoxide in epoxidation reactions. The use of milling during catalyst synthesis leads to further growth of selectivity of epoxides formation.     

Capacitance–voltage property of composite microsphere monolayer with polymer/Fe2O3/ polymer structure

Inorganic nanoparticles Fe₂O₃ 3–5 nm in diameter were assembled on the surface of polymer microspheres and then encapsulated in the polymer to form a trilayer composite structure. The capacitance–voltage (C–V) curve of the composite microsphere monolayer shows the presence of a plateau. The electron transportation process in the special structure was investigated combining with the energy band model. The results show that Fe₂O₃ layer acts as a charge trap between polymer layers which are regarded as potential barriers.     

Hydrothermal synthesis and structure characterization of a new organic–inorganic composite (4,4′-H2bipy)2(4,4′-hbipy)2(ZnW12O40)·6H2O

A new organic–inorganic composite (4,4′-H₂bipy)₂(4,4′-Hbipy)₂(ZnW₁₂O₄₀)·6H₂O has been prepared by hydrothermal reaction and characterized by elemental analysis, IR and UV spectra, thermal analysis and single-crystal X-ray structural analysis. It belongs to the monoclinic system, space group P2₁/c, with a?=?18.637(4), b?=?14.003(3), c?=?26.470(5)?Å, β?=?104.78(3)°, V?=?6680(2)?ų, Z?=?4. Structural analysis indicates that the title complex consists of a Keggin anion [ZnW₁₂O₄₀]^6?, 4,4′-bipyridine and water of crystallization, constructing a supramolecular system through hydrogen bonding interactions. Thermal analysis shows that the heteropolyanion [ZnW₁₂O₄₀]^6? starts to decompose at 587.0°C.     

Conductivity of Al2(WO4)3–WO3 and Al2(WO4)3–Al2O3 Composites

Russian Journal of Electrochemistry - Composites of (1 – x)Al2(WO4)3–xWO3 and (1 – x)Al2(WO4)3–xAl2O3 are synthesized and their conductivity is studied as dependent on the...     

The impact of upper cut-off voltages on the electrochemical behaviors of composite electrode 0.3Li(2)MnO(3)·0.7LiMn(1/3)Ni(1/3)Co(1/3)O(2)

This work has initiated an investigation on the electrochemical behaviors and the structure changes of the composite electrode 0.3Li(2)MnO(3)·0.7LiMn(1/3)Ni(1/3)Co(1/3)O(2) when charged with different cut-off voltages. It is found that the charge cut-off voltages could not only affect the capacity property and coulombic efficiency, but also alter the electrode kinetics of the composite. As a consequence, the electrochemical activation of the composite electrode is highly dependent on the charge cut-off voltages: when the charge cut-off voltage is higher than 4.5 V, the inert component Li(2)MnO(3) in the composite electrode is completely activated. At the meanwhile, there occurred an irreversible oxygen loss during the initial charge process, which yielded a hollow sphere in the electrode. Regardless of charge voltages, Mn ions in the composite electrode were presented in an oxidation state of +4, while Co(2+) ions were detected at the surface of the electrode when cycled at low voltages. Ni ions in the composite could react with organic or inorganic species and then cover the surface of the cycled electrode.     

(Ag/Al2O3+Cu/Ce(x)/Al2O3)组合催化剂催化乙醇选择性还原NOx及其副产物的消除

制备了Cu/Ce(x)/Al2O3(x为Ce与Al的摩尔比)系列氧化催化剂,并考察了(Ag/Al2O3 Cu/Ce(x)/Al2O3)组合体系催化乙醇还原NOx以及氧化去除反应副产物(CO和未完全燃烧的碳氢化合物)的活性.在200～350℃温度区间,组合催化剂具有与Ag/Al2O3相似的NOx去除效率.随着Ce/Al比增加,氧化催化剂去除CO的活性逐渐提高.Cu/CeO2催化剂具有最好的氧化活性,但其对NOx的去除有较大影响.综合考虑NOx转化率以及CO和HC的去除效果,(Ag/Al2O3 Cu/Ce(0·15)/Al2O3)是最佳的催化剂组合体系.通过对此系列氧化催化剂的BET比表面积、XRD、H2-TPR以及XPS等表征结果的分析,发现Cu和Ce之间的相互作用是催化剂氧化CO能力提高的主要原因.     

Electron transfer kinetics on composite diamond (sp3)–graphite (sp2) electrodes

The concept of non-diamond sp² impurity states as charge transfer mediators on boron-doped diamond (BDD) surface was suggested as an explanation for the electrochemical behavior of synthetic diamond based electrodes. In order to verify this concept, graphite particles (sp²) were deposited on diamond electrodes (sp³) by mechanical abrasion. The behavior of the so prepared diamond–graphite composite electrodes were compared with those of as-grown (BDD_ag) and those after mild anodic polarization (BDD_mild).Outer-sphere electron transfer processes such as ferri/ferrocyanide (Fe(CN)₆III/II) and inner-sphere charge transfer reactions such as 1,4-benzoquinone/hydroquinone (Q/H₂Q) were chosen in order to investigate the electrochemical properties of these composite electrodes. Both redox systems became more reversible as the graphite (sp²) loading increased. A strong analogy existed between as-grown diamond electrodes and diamond–graphite composite electrodes.Finally a model is proposed which describes the BDD electrode surface as a diamond matrix in which non-diamond (sp²) impurity states are dispersed. These non-diamond sp² states on BDD surface acts as charge mediators for both inner-sphere and outer-sphere reactions.     

Intramolecular Rearrangements of >Si(O–C·=O)(CH2–CH3) and >Si(CH2–CH·–CH3)(CH2–CH3) Radicals

Using ESR and IR spectroscopy, the structures of >Si(O–C^·=O)(CH₂–CH₃) (1) and >Si(CH₂–CH^·–CH₃)(CH₂–CH₃) (2) radicals were deciphered. The directions and kinetic parameters of reactions of intramolecular rearrangements in these radicals were determined. The reactions of hydrogen atom abstraction in radical (1) from the CH₂ and CH₃ groups were studied. It was found that the endothermic reaction of hydrogen atom abstraction from the methyl group occurs at a higher rate than the exothermic reaction with the methylene group. The differences are determined by changes in the size of a cyclic transition state. Based on the experimental data, the strengths of separate C–H bonds in surface fragments are compared. The rearrangement >Si(CH₂–CH^·–CH₃)(CH₂–CH₃) >Si(C^·(CH₃)₂)(CH₂–CH₃) was discovered and its mechanism was determined. One of its steps is the skeletal isomerization Si- (2)- _. (1)Si- (1)- _. (2). Experimental data are analyzed using the results of quantum-chemical calculations of model systems.