含全氟烃基的联苯酯类液晶的合成及其介晶性

全氟烃或半氟烃链无手性液晶化合物可能呈现铁电液晶性, 具有较大的学术及应用价值而受到研究人员的重视. 合成了全氟己基苯甲酸联苯酯类液晶化合物: ROC₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (3a～3e), C₃H₇C₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (6a)及其烃衍生物. 用差示扫描量热法(DSC)和偏光显微镜(POM)对其介晶性研究发现: 烃衍生物呈有序度较低的向列相, 熔点较高, 清亮点较低, 液晶相较窄. 全氟烃基取代的化合物出现多个有序度较高的近晶相, 熔点较低, 清亮点高, 介晶相温度范围宽.     

Melting of saturated fatty acid zinc soaps

The melting of alkyl chains in the saturated fatty acid zinc soaps of different chain lengths, Zn(C(n)H(2n+1)COO)(2); n = 11, 13, 15, and 17, have been investigated by powder X-ray diffraction, differential scanning calorimetry, and vibrational spectroscopy. These compounds have a layer structure with the alkyl chains arranged as tilted bilayers and with all methylene chains adopting a planar, all-trans conformation at room temperature. The saturated fatty acid zinc soaps exhibit a single reversible melting transition with the associated enthalpy change varying linearly with alkyl chain length, but surprisingly, the melting temperature remaining constant. Melting is associated with changes in the conformation of the alkyl chains and in the nature of coordination of the fatty acid to zinc. By monitoring features in the infrared spectra that are characteristic of the global conformation of the alkyl chains, a quantitative relation between conformational disorder and melting is established. It is found that, irrespective of the alkyl chain length, melting occurs when 30% of the chains in the soap are disordered. These results highlight the universal nature of the melting of saturated fatty acid zinc soaps and provide a simple explanation for the observed phenomena.     

带有端烷烃链的超支化聚酯的受限结晶及动态黏弹行为

以三羟甲基丙烷(TMP)为核,二羟甲基丙酸(DMPA)为支化单体,通过熔融缩聚法合成了第3代端羟基脂肪族超支化聚酯,并用十八酸对其进行端基改性,采用广角X射线衍射(WAXD)、示差扫描量热分析(DSC)及红外光谱(FTIR)研究了不同端基改性程度的超支化聚酯的结晶熔融行为及端烷烃链的构象和堆积结构随温度的变化,采用旋转流变仪研究了端烷烃链对脂肪族超支化聚酯熔体动态黏弹行为的影响.结果表明,这类改性超支化聚酯的结晶归因于长链端烷烃的有序排列,改性程度越高,衍射峰强度越大.受限结晶的端烷烃链在升温后并不能完全转变为无序的结构状态,改性超支化聚酯在"熔点"以上仍有部分有序结构存在.超支化聚酯的线性黏弹区随着端基改性程度的增大而逐渐变短,超支化聚酯的弹性逐渐增大,剪切变稀越明显.动态流变测试中所出现的现象与改性超支化聚酯中端烷烃链的受限密切相关.     

Designer ionic liquid crystals based on congruently shaped guanidinium sulfonates

Ionic liquid crystals are mesogenic compounds that consist of cations and anions, usually rod-like cations and spherical anions. Herein we report a new method for the synthesis of ionic liquid crystals by using cations and anions of the same molecular shape with oppositely charged head groups. Thus, 4-alkoxyphenylpentamethylguanidinium 4-alkoxyphenylsulfonate ion pairs have been synthesised. 4-Alkoxyphenylpentamethylguanidinium iodides were also prepared to determine the influence of congruently shaped anions, in comparison with their spherical counterparts, on mesophase behaviour, which was investigated by differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). All the liquid crystalline salts exhibit smectic A mesophases with strongly interdigitated bilayer structures. The guanidinium sulfonate ion pairs show mesomorphic properties from shorter alkyl chain lengths (≥C(9)) and lower melting points (≈10 K), whereas the corresponding guanidinium iodides are liquid crystalline for longer alkyl chain lengths (≥C(14)). For chains with ≥C(18), however, the mesophase range decreases for the sulfonate ion pairs, but not for the iodide salts.     

烷基链长及肽链电荷分布对脂肽双亲分子自组装及水凝胶化的影响

为阐明脂肽分子烷基链长及肽链电荷分布对其自组装及水凝胶化的影响, 设计合成了C_nV₃K₂ (n=12, 14, 16) 和C_mKV₃K (m=14, 16)两个系列的脂肽分子. 原子力显微镜(AFM)和透射电镜(TEM)结果表明, 两个系列的脂肽分子都可以自组装成一维纳米带结构. 圆二色(CD)光谱结果表明, C_nV₃K₂系列自组装体的二级结构为β折叠; C_mKV₃K系列自组装体中包括α螺旋和β折叠两种二级结构, 其中C14KV3K的α螺旋结构较多, C16KV3K的β折叠结构占优. 烷基链疏水作用的增强会抑制β折叠结构侧向堆积, 使纳米带随烷基链的变长而变窄; 电荷分布于肽链部分的两端有利于纳米带结构的侧向生长. 流变性测试结果表明, 在浓度10 mmol·L^-1、pH 8.4下, 脂肽分子可以形成自支撑水凝胶, 相比烷基链长度, 肽链部分的电荷分布对水凝胶性能影响更大.     

1-烷基-3-甲基咪唑溴化盐离子液体的晶体结构及性能

以不同链长溴代烷烃和N-甲基咪唑反应得到1-烷基-3-甲基咪唑溴化盐,用元素分析和核磁共振对化合物进行了表征.室温下用溶剂蒸发法得到了单晶,并用X射线单晶衍射法测定了晶体结构,该晶体属于三斜晶系,空间群为P-1.化合物采用双分子层结构,水分子参与结构的形成,整个化合物由交叉的线性烷基链、咪唑头基、溴离子和水分子组成,溴离子和水分子之间较强的氢键作用在(010)方向上形成了一个无限的O-H···Br氢键链.用偏光显微镜、差示扫描量热(DSC)技术研究了其液晶行为,证明其一水合物为近晶相热致液晶.液晶区域的温度范围较宽说明水分子起到稳定作用.     

Limited Fraction of Crystallized Side Chains in Bottlebrush Poly(n-alkyl methacrylate)s

Crystallinity of bottlebrush polymers due to side chain crystallization has been considered to be related to the length of the side chains only under the assumption of complete participation of crystallization by all side chains.Recent experimental results revealed that in poly(n-alkyl methacrylate)s a fraction of side chains could not crystallize due to constraints imposed by the trapped main chain entanglements and required expansion of main chain-main chain distance.This result renders the or...     

ORDERED STRUCTURAL EVOLUTION AND RELAXATION BEHAVIORS OF A SERIES MICROPHASE SEPARATED “HAIRY-ROD” POLYIMIDES WITH MULTIPLE ALKYL SIDE CHAINS

A series of “hairy-rod” polyimides, BBPA(n), with multiple alkyl side chains was prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-biphenyldiamine substituted in the 2,2′-positions with benzoate, which was substituted in the 3,4,5-positions with ether side chains of varying lengths. The number of the methylene units, n, in these alkyl side chains were in even numbers ranging from 8 to 18. Combining techniques of one-dimensional (1D) and 2D wide angle x-ray diffraction, 1D small angle X-ray scattering, differential scanning calorimetry experiments, it was found that this series of “hairy-rod” polyimides possess a micro-phase separation between the backbones and side chains. This led to the formation of ordered structures in two different length scales, of which both are hexagonal packing: one is attributed to the alkyl side chains on the sub-nanometer scale, and another is for the whole polymer chains on the nanometer scale. The development of the hexagonal structure on the sub-nanometer scale was critically dependent upon the lengths of the alkylside chains. Three relaxation processes were captured by dynamic mechanical analysis, i.e., segmental motion of the backbones, α the melting of the side chain crystals, β1, which exits only for the materials with longer side chains(n=18,16); and the subglass relaxation of side chains, β2- The peak relaxation temperature of the α process decreased with increasing the length of side chains, while the one of the β2 process increased. The activation energy of the α relaxation was relatively independent on the length of side chain, whereas, β2 process showed the increasing of activation energy with increasing the length of side chains.     

具有不同柱状结构的苯并菲盘状液晶化合物的合成及自组装

合成了3种含有不同长度烷基链的苯并菲盘状液晶化合物; 通过1H NMR 和 MALDI-TOF MS对其结构进行了表征; 利用差示扫描量热法(DSC)、热台偏光显微镜(POM)和小角X射线散射实验(SAXS)对3种液晶化合物的自组装行为进行了研究. 结果表明, 烷基链的长度对苯并菲盘状液晶化合物自组装结构的影响显著. 柔性链为辛基的苯并菲盘状液晶化合物自组装成六方柱状液晶相; 柔性链为十二烷基的化合物自组装成倾斜柱状液晶相; 而柔性链为十六烷基的化合物则未形成液晶相.     

Odd-even oscillations in first hyperpolarizability of dipolar chromophores: role of conformations of spacers

Quantum chemical calculations on the linear and nonlinear electric polarizabilities of dipolar molecules separated by the alkyl spacers have been performed on O(2)N-Ph-N=N-Ph-(CH(2))(n)-Ph-N=N-Ph-NO(2), n = 1-12. These molecules exhibit a very strong odd-even behavior in the first hyperpolarizabilities (beta), with large (small) beta for n = odd (n = even). Such odd-even oscillations have been reported experimentally on similar systems, but the origin of such phenomena remains unclear. We propose it to be due to the role of the conformational orientation of the intervening alkyl spacers that leads to eclipsed orientation (parallel) of the dipoles for n = odd chains while staggered orientation (antiparallel) for n = even chains. The energy difference between the two extreme angular forms is approximately 6-8 kcal/mol, clearly more than the thermal fluctuations at room temperature. These conformational orientations will be preserved, leading to different packing arrangements at the macroscopic scale. We believe that it is this interaction at the molecular scale that controls such a macromolecular property.     

Nonintegral and integral folding crystal growth in low-molecular mass poly(ethylene oxide) fractions. I. Isothermal lamellar thickening and thinning

The overall crystallization and crystal melting of one low-molecular mass poly(ethylene oxide) (PEO) fraction (MW 3000) have been investigated by differential scanning calorimetry (DSC) and in situ small-angle x-ray scattering (SAXS). The salient new results indicate that initial transient crystals with nonintegral folding (NIF) chain lengths form over a wide range of crystallization temperatures. This NIF structure subsequently transforms into crystal forms with integral folding (IF). The PEO IF crystals consist of the extended chain (n = 0) crystal and the once-folded chain (n = 1) crystal, while the NIF has an intermediate fold length. The NIF → IF transformation occurs either by lamellar thickening or thinning. The NIF crystal is less stable than the IF(n = 1) crystal, but its growth is more rapid. Crystallization of the PEO (MW 3000) fraction is thus recognized as a compromise between the direction of the thermodynamic driving force and the kinetic pathway. Some potential consequences of these observations are also addressed.     

N-烷基化聚对苯二甲酰对苯二胺梳状高分子中烷基侧链对刚性主链堆积行为的影响

基于聚对苯二甲酰对苯二胺(PPTA), 采用N-烷基化方法制备了系列PPTACns(烷基侧链碳原子数n=8, 10, 12, 14, 16, 18)刚性主链梳状高分子, 利用DSC, XRD和FTIR等方法研究了其主链堆积行为、 分子链构象及热性能等与烷基侧链长度及结晶特性之间的关系. XRD和DSC结果表明, 当烷基侧链碳原子数达到14时, 烷基侧链发生结晶. XRD结果显示, PPTACns具有层状结构, 烷基侧链长度对主链层间距影响显著. FTIR研究发现, 烷基侧链的聚集状态对PPTACns分子链的构象产生较大影响, 伴随着烷基侧链结晶的熔融, PPTACns的分子链构象发生显著改变. 烷基侧链处于熔融状态的PPTACns的ν_C=O和γ_C-H谱带峰位与烷基侧链不结晶的PPTACn接近.     

2,5-双取代烷基苯磺酸钠胶束微结构的1H NMR研究

利用核磁共振化学位移变化, 自旋-自旋弛豫和2D NOESY(two-dimensional nuclear Overhauser enhancement spectroscopy)研究了一系列新合成的双取代烷基苯磺酸盐的胶束化. 结果表明, 邻位取代的是正烷烃链, 间位取代的是支烷烃链. 而且, 邻位取代的烷烃链越长, 参与形成胶束疏水核表面层的亚甲基个数越多. 因此, 每个分子在饱和吸附的油水界面上的面积越大. 间位取代的分支链在胶束疏水核中堆积得没有邻位取代的正烷烃链紧密. 分支链越短, 堆积得越不紧密. 描述了胶束中分子的相对排列.     

Effect of hydrogen-bonded supramolecular assembling on liquid crystal properties of imidazole-containing azomethines and their chelates with copper(II)

A series of imidazole-containing rod-like Schiff's bases and their ionic copper(II) chelates with various lengths of the terminal alkyl chain containing 6, 8, 10, 12, 14 and 16 carbon atoms have been synthesised. The synthesised compounds were characterised by elemental analyses, ¹H NMR, IR and UV–vis and mass spectroscopies. Thermotropic smectic C mesophases in the ligands and smectic A mesophases in the copper(II) complexes were identified using POM, DSC and small-angle XRD scattering methods. X-ray diffraction patterns of the prepared imidazole imines indicate to supramolecular self-assembled structures in the liquid crystal state, which are formed by means of intermolecular hydrogen bonds. It was established that both liquid crystal arrangement and supramolecular assemblies in ligands disappeared near 190°C, mainly regardless of the lengths of the terminal alkyl chains. Contrary, assembling of the copper(II) complexes into supramolecular bilayers occurs near 200°C, which causes their transition to a smectic A mesophase.     

Microstructures of 2,5-dialkyl benzene sulfonate micelles studied using H NMR

Micellization of a series of newly synthesized dialkyl benzene sulfonates was studied using proton chemical shift changes, spin-lattice and spin-spin relaxation NMR spectroscopy, and two-dimensional nuclear Overhauser enhancement spectroscopy (2D NOESY). The o-substituted chains are normal alkyl chains with varying lengths, and the m-substituted ones are branched alkyl chains. The results showed that the longer the o-substituted normal alkyl chain, the more the methylene groups participated in the formation of the rigid surface layers of the hydrophobic micellar cores. Consequently, the larger was the area per molecule adsorbed on the interface between oil and water at saturation. The branched m-substituted alkyl chains of the dialkyl benzene sulfonates were less tightly packed than the o-substituted normal alkyl chains in the hydrophobic micellar cores. The shorter the m-substituted branched alkyl chains, the looser they were packed in the hydrophobic micellar cores. The relative arrangement of the surfactant molecules in the micelles was elucidated.     

Classifying Structural Characteristics to Enhance Computation of Enthalpy of Formation of Halohydrocarbons

Density functional theory (DFT) calculations are made and least squares calibration performed for various halohydrocabons, which were 27 straight‐chain alkyl halides, 20 branch‐chain alkyl halides and 19 aromatic halides, to determine their enthalpies of formation (ΔH_f). The mean absolute error (M. |A.E.|) in ΔH_f across 66 molecular computations was only 7.8 kJ/mol (1.9 kcal/mol). Grouping the molecules by their structural characteristics improved M. |A.E.| of ΔH_f by 0.2–2.2 kJ/mol over that obtained using corresponding modified data for the same 66 unclassified molecules.     

Simple and complex lattices of N-alkyl fatty acid amides on a highly oriented pyrolytic graphite surface

STM investigations of three N-alkyl fatty acid amide molecules have been carried out to get information of their molecular arrangement on a highly oriented pyrolytic graphite surface. With variable positions of amide along the alkyl chain, complex lattices with different lattice constants were observed. Besides the lattices with a repeat unit matching one or two molecular lengths, a lattice with a repeat unit corresponding to three molecular lengths was found. In addition, the portion of different lattices depends on the length of the shorter alkyl chain. DFT-D calculations point to interactions of antiparallel oriented dipoles due to the amide group, which are distance dependent and thus larger for shorter N-alkyl chains.     

聚紫精-脂肪酸盐表面活性剂复合物的组装合成及相行为研究

通过Menshutkin反应合成聚(对亚二甲苯基-4,4'-联吡啶二溴)(PXV)半刚性链聚紫精,采用等量混合法将聚紫精与系列不同碳链长度的阴离子表面活性剂脂肪酸钠Cn-1COONa(n=10,12,14,16,18)组装制备聚电解质-表面活性剂(PXV-Cn)复合物,运用DSC,TGA,XRD,FTIR等表征手段初步考察复合物的超分子结构及相行为.基于FTIR谱学分析特征、小角与广角变温XRD数据以及DSC热分析焓变的定量计算结果,表明半刚性主链聚紫精和脂肪酸盐极性头基组成的极性层与侧链烷烃非极性层交替排列形成层状超分子结构,其中烷烃链靠近极性端约8个亚甲基处于无定型态,其余碳链则形成结晶相.最短的PXV-C10形成少量规整度较低的三斜晶βT,n≥16以上的长碳链复合物则以六方相αH为主,其它中等长度侧链脂肪酸盐复合物则为多种结晶形式共存.随着碳链长度n的增加,侧链结晶熔点Tm升高,n≥16的长碳链复合物表现出随温度变化的可逆结晶相态变化.且这类聚紫精-表面活性剂复合物表现出高于200℃的热稳定性.     

Synthesis and characterisation of novel isoxazole-based banana liquid crystals from naturally occurring curcumin

Isoxazole-based bent-core liquid crystals (LCs) derived from naturally occurring curcumin were synthesised and their LC properties were investigated by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction techniques. Five compounds, including a branched alkyl chain derivative, were prepared and characterised. These derivatives exhibit enantiotropic mesophases. While lower homologues display wide-temperature-range nematic phase, a longer-chain derivative 3d shows smectic C phase in addition to the nematic phase. The bent angle in these compounds is in between calamitic LCs and banana LCs. Therefore, the molecules escape from polar order packing observed in typical bent-core LCs. Increasing the length of alkyl chain reduces both melting and isotropic temperatures in the series. However, the compound with branched alkyl chains exhibits significant reduction in the nematic-isotropic temperature only. Detailed XRD experiments confirm the presence of the N phase in the lower homologues and SmC phase in a higher homologue.     

Melting behaviors,crystallization kinetics,and spherulitic morphologies of poly(butylene succinate) and its copolyester modified with rosin maleopimaric acid anhydride

This article investigated the melting behaviors, crystallization kinetics, and spherulitic morphologies of poly(butylene succinate) (PBS) and its copolyester (PBSR) modified with rosin maleopimaric acid anhydride, using wide‐angle X‐ray diffraction, differential scanning calorimeter (DSC), and polarized optical microscope. Subsequent DSC scans of isothermally crystallized PBS and PBSR exhibited two melting endotherms, respectively, which was due to the melt‐recrystallization process occurring during the DSC scans. The equilibrium melting point of PBSR (125.9 °C) was lower than that of PBS (139 °C). The commonly used Avrami equation was used to describe the isothermal crystallization kinetics. For nonisothermal crystallization studies, the model combining Avrami equation and Ozawa equation was employed. The result showed a consistent trend in the crystallization process. The crystallization rate was decreased, the perfection of crystals was decreased, the recrystallization was reduced, and the spherulitic morphologies were changed when the huge hydrogenated phenanthrene ring was added into the chain of PBS. The activation energy (ΔE) for the isothermal crystallization process determined by Arrhenius method was 255.9 kJ/mol for PBS and 345.7 kJ/mol for PBSR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 900–913, 2006