Laser-induced breakdown detection combined with asymmetrical flow field-flow fractionation: application to iron oxi/hydroxide colloid characterization

The combination of asymmetrical flow field-flow fractionation (AsFlFFF) with the laser-induced breakdown detection (LIBD) is presented as a powerful tool for the determination of colloid size distribution at trace particle concentrations. Detection limits (D1) of 1, 4, and 20 microg/L have been determined for a mixture of polystyrene reference particles with 20, 50, and 100 nm in size, respectively. This corresponds to injected masses of 1, 4, and 20 pg, which is lower than found in a previous study with the symmetrical FlFFF (SyFlFFF). The improvement is mainly due to the lower colloid background discharged from the AsFlFFF channel. The combined method of AsFlFFF-LIBD is then applied to the analysis of iron oxi/hydroxide colloids being considered as potential carriers for the radionuclide migration from a nuclear waste repository. Our LIBD arrangement is less sensitive for iron colloid detection as compared to reference polystyrene particles which results in a detection limit of approximately 240 microg/L FeOOH for the AsFlFFF-LIBD analysis. This is superior to the detection via UV-Vis absorbance and comparable to ICP-MS detection. Size information (mean size 11-18 nm) for different iron oxi/hydroxide colloids supplied by the present method is comparable to that obtained by sequential ultrafiltration and dynamic light scattering. A combined on-line ICP-MS detection is used to gain insight into the colloid-borne main and trace elements.     

Size dispersion and colloid mediated radionuclide transport in a synthetic porous media

Size dispersion effects during the migration of natural submicron bentonite colloids (<200 nm) through a ceramic column are observed for the first time by laser-induced breakdown detection (LIBD) at ppm (parts per million) mass concentration. Larger size fractions ( approximately 200 nm) arrive prior to smaller size fractions (<100 nm) at the column outlet in agreement with model predictions and earlier findings with carboxylated polystyrene spheres. By addition of trace amounts of americium(III) and plutonium(IV), colloid mediated transport of these radionuclides is studied. The peak arrival times of Pu-244 and Am-241, as measured by ICP-MS, match the bentonite colloid breakthrough and occur significantly prior to the conservative tracer (HTO) indicating the colloid-borne migration of tri- and tetravalent radionuclides.     

XAFS and LIBD investigation of the formation and structure of colloidal Pu(IV) hydrolysis products

Pu(IV) oxyhydroxide colloid growth is investigated with XAFS and LIBD. From combined results a model of colloid formation is proposed, which leads to a face-centered cubic Pu sublattice having cation defects, as observed with EXAFS, and a linear dependency of log [Pu(IV)] on -log [H+] with slope -2, in accord with LIBD. The solubility for Pu(IV) measured with LIBD is close to the lower limit of the solubility curve from previously reported data.     

Characterization of heavy-metal-containing seepage water colloids by flow FFF, ultrafiltration, ELISA and AAS

Heavy-metal-containing humic colloids from seepage water samples of three different municipal waste disposal plants were characterized in terms of molecular weight, hydrodynamic radius and heavy metal content. The size distribution of the colloids was determined with ultrafiltration (UF) and flow field-flow fractionation (flow FFF). The humic colloids in the seepage water samples were characterized using an off-line coupling of flow FFF with an enzyme-linked immunosorbent assay (ELISA) for humic substances. The heavy metals in the different size fractions obtained by UF and flow FFF were determined using atomic absorption spectroscopy (AAS). The colloid size distributions obtained with UF showed a maximum of the distribution in the range 1–10 nm. Seepage water samples with high colloid concentrations had a second maximum in the range 0.1–1 m. The determination of colloid size with flow FFF gave different colloid size distributions for the three waste disposal seepage waters, whereas water from the oldest disposal plant showed the smallest colloid size with a maximum at 0.9 nm and water from the most recent plant showed the largest colloid size with a maximum at 1.3 nm. The determination of particle classes with regard to the chemical composition using a scanning electron microscope with energy dispersive X-ray fluorescence detector (SEM/EDX) showed that the particles can be divided into five classes: silicates, insoluble salts, iron(hydr)oxides, carbonates and organic colloids (humic colloids). Flow FFF/ELISA off-line coupling showed that the most frequently occurring colloids of the seepage waters were humic colloids and investigation of the UF-size-fractions with AAS showed that up to 77% of the total mass of a heavy metal element can be bound to particles, especially to humic colloids. Additionally, the distributions of the heavy metals Fe, Cu and Zn were investigated with flow FFF/AAS off-line coupling. These results also showed that a substantial amount of these heavy metals (up to 46%) was bound to humic colloids.     

Determination of size, concentration and elemental composition of colloids with laser-induced breakdown detection/spectroscopy (LIBD/S)

The application of laser-induced breakdown detection (LIBD) as a new and powerful particle-analyzing technique for the determination of solubility data by monitoring initial colloid generation, when the metal ion concentration just exceeds the solubility at a given pH value, is investigated. Laser-induced breakdown spectroscopy (LIBS) is used for selective analysis of an aqueous suspension of lanthanide oxide particles in the presence of the respective lanthanide aquo ion. The detection limit for aquo ion and oxide particle is determined. On the basis of the different detection limits, the LIBS technique is used to study the formation of hydroxide colloids in aqueous solution by varying the pH value until the solubility limit is exceeded. LIBS enables both qualitative and quantitative monitoring of particle formation without artifacts arising from other contaminants. LIBD and LIBS are described and compared. The advantages and disadvantages of the methods for the determination of solubility data are discussed.     

Gold colloid analysis by inductively coupled plasma-mass spectrometry in a single particle mode

Analysis in a single particle mode of gold colloids in water has been performed by inductively coupled plasma-mass spectrometry (ICP-MS). The signal induced by the flash of ions due to the ionization of a colloid in the plasma torch can be measured for the ions ¹⁹⁷Au⁺ by the mass spectrometer without interferences. The intensity of the MS signal is recorded in time scan. The recorded peak distributions were analysed as a function of the colloid size for five monodisperse colloids (80-250 nm). This study describes the experimental conditions to analyse gold colloids in a single particle mode. The size detection limit is around 25 nm corresponding to 0.15 fg colloids and one particle per ml may be detected during a 1 min time scan within standard procedure.     

The nanoscale description of acid penetration to the gold colloids encapsulated in silica sol–gel matrix

Various sizes of gold nano colloidal particles ranging from 5 nm to 100 nm of size were encapsulated in a silica based sol–gel, and these surfaces were exposed to a pH 1 acid solution. This enabled us to observe the process of solvent intrusion and interaction with gold colloids by the absorption spectrum as a function of time. The rate was analyzed by a single exponential analytical function, and the maximum rate was found for gold colloid of 15 nm size. The least acid interaction and colour change was observed for the size of 60 nm. It was speculated that the surface of these gold colloids were homogeneously covered by the sodium tetra-borate buffer which insulated silica gel layer, thus avoiding direct contact of the acid with the surface of the gold colloid. This study confirmed that the nano scale dopant size affects the rate of solvent penetration into a sol–gel cavity.     

Colloid-polymer mixtures in solution with refractive index matched acrylate colloids

Colloid-polymer (CP) mixtures extend between two limiting cases, the colloid limit with the polymer coil size small compared to the colloid radius Rcol and the protein limit with the colloidal particles much smaller in size than the radius of gyration of the polymer chains Rg. In the present work, model systems are developed for the protein limit. The colloid-solvent pairs are optimized in terms of their isorefractivity in order to facilitate the characterization of large polystyrene chains in suspensions of small colloids. The degree of isorefractivity of colloidal particles was successfully evaluated in terms of a reduced scattering intensity. Two polystyrene samples with radii of gyration of Rg = 96 nm and Rg = 78 nm, respectively, are used. The radii of the colloidal particles are close to Rcol = 12 nm, leading to size ratios of Rg/Rcol = 8 and Rg/Rcol = 6.5. Four colloid solvent systems were found to be suitable for polymer characterization by light scattering, one based on silica particles and three systems with acrylate particles. The present investigation is focused on the three acrylate systems: poly(methyl methacrylate) in ethyl benzoate (ETB) at 7 degrees C, poly(ethyl methacrylate) in toluene at 7 degrees C and poly(ethyl methacrylate) in ETB at 40 degrees C. Characterization of PS chains is for the first time performed in colloid concentrations up to 2.5% by weight. In all cases, the size and shape of the polymer chains remain unchanged. A slight mismatch of the colloid scattering or a limited colloid solubility prevented investigation of PS chains at higher colloid concentration.     

Effects of protective colloids on the preparation of poly(l-lactide)/poly(butylene succinate) microcapsules

Poly(l-lactide)/poly(butylene succinate) microcapsules containing an aqueous solution of sodium(+)-tartrate dihydrate were prepared by the interfacial precipitation method through solvent evaporation from (w/o)/w emulsion. The effects of poly(vinyl alcohol) used as a protective colloid in the microencapsulation were investigated regarding thermal properties, particle size distributions, surface morphologies, and release behaviors of the biodegradable microcapsules. It was concluded that encapsulation efficiency, surface morphologies, thermal properties, and releasing speed were closely related to the particle size distributions of microcapsules under different conditions of the protective colloid.     

Monodisperse copper‐ and silver‐nanocolloids suitable for heat‐conductive fluids

Copper colloid was prepared via reductive stabilization. The suspension of the trioctylaluminum‐stabilized copper colloid was peptized using Korantin SH and cashew nut shell liquid (CNSL). Fluids with particle sizes <10 nm were obtained with Korantin and 7–15 nm in the case of CNSL. However, the copper colloid is air sensitive. A very straightforward one‐step method leads to air‐stable silver nanofluids. Thermal decomposition of silver lactate in the presence of Korantin SH and mineral oil as the medium gave a silver nanofluid. Silver particle formation and air stability were monitored using UV–VIS spectroscopy. The presence of monodispersed spherical silver nanoparticles was confirmed. Transmission electron microscopy showed a two‐dimensional assembly of the silver particles with a size distribution of 9.5 ± 0.7 nm. FTIR has revealed information about the interaction between the surfactant and the silver surface. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of spherical submicron-sized magnetite/silica nanocomposite particles

This paper describes a method for fabricating spherical submicron-sized silica particles that contained magnetite nanoparticles (magnetite/silica composite particles). The magnetite nanoparticles with a size of ca. 10 nm were prepared according to the Massart method, and were surface-modified with carboxyethylsilanetriol. The fabrication of magnetite/silica composite particles was performed in water/ethanol solution of tetraethoxyorthosilicate with ammonia catalyst in the presence of the surface-modified magnetite nanoparticles. The magnetite/silica composite particles with a size of ca. 100 nm were successfully prepared at 0.05 M TEOS, 15 M water, and 0.8 M ammonia with injection of the magnetite nanoparticle colloid at 2 min after the initiation of hydrolysis reaction of TEOS. Magnetite concentration in the composite particles could be raised to 17.3 wt.% by adjustment of the injected amount of the magnetite colloid, which brought about the saturation magnetization of 7.5 emu/g for the magnetite/silica composite particles.     

Synthesis and spectroscopic characterization of gold nanoparticles

Photoluminescent nanoparticles of gold with size 3, 4, 6, and 9nm are prepared by borohydride/citrate reduction in presence of polyethylene glycol (PEG)/tannic acid. The prepared nanomaterials are characterized by UV-vis spectroscopy and dynamic light scattering (DLS) technique. Intense photoluminescence (PL) is observed in nanoparticles prepared by fast reduction with borohydride in presence of PEG. A red shift of PL emission from 408 to 456nm is observed for the change of size from 4 to 6nm. Increase in PL intensity is observed for all the nanoparticles on the addition of KCl. Citrate reduced gold colloid which consists of large particles of size approximately 35nm with anisotropic shapes showing two plasmon peaks is also prepared. The anisotropy is confirmed by TEM measurement. SERS activity of this colloid is tested using glutamic acid as an adsorbate probe. Assignment of the observed bands is given.     

PICA法制备用于高效液相色谱的锆胶基质柱填料

迄今 ,硅胶基质固定相在 HPLC领域仍占据主导地位 ,但由于它的 p H使用范围窄 ,尤其在碱性条件下基质逐渐溶解 ,其使用受到限制 [1] .为此 ,寻找稳定性能高的新基质成为当前色谱学研究的热点之一 ,二氧化锆因具有良好化学稳定性和机械强度而受到关注 .目前 ,制备微米级、球形和多孔二氧化锆基质柱填料的常用方法有两种 :(1 )油乳化法 (OEM) ;(2 )聚合诱导胶体凝聚法 (PICA) .OEM法操作简单 ,但制备的二氧化锆微球粒径分布宽且孔径较小 .Carr[2 ,3] ,Unger[4 ] ,Rassi[5,6 ]和 Kawahara等[7,8] 在用 OEM法制备二氧化锆微球方面做了…     

The feasibility of inert colloidal processing of silicon nanoparticles

Silicon nanoparticles have important applications, including nonvolatile floating-gate memory devices. To prevent device performance variations, particle size and oxide thicknesses need to be controlled with a high degree of precision. Additionally, producing well-ordered, two-dimensional arrays of nanoparticles may require the exploitation of self-assembly techniques and colloidal forces, which in turn requires that silicon nanoparticles first come into contact with liquids. Until recently, aerosol silicon nanoparticle collection into liquid was assumed to be an inert process. Once formed, the silicon nanoparticle colloid was assumed to be inert. In fact, silicon nanoparticles produced in the aerosol phase by dilute silane pyrolysis and size classified with a differential mobility analyzer undergo a size reduction upon collection in ethylene glycol, water, and ethanol. Unclassified polydisperse silicon aerosol nanoparticles with an average diameter of 11 nm become monodisperse when collected in a colloid and have a final particle diameter of 2-5 nm. Further evidence suggests that silicon nanoparticles collected in ethanol react with the ethanol to produce tetraalkylorthosilicate-like species. Collections of aerosol silicon nanoparticles in degassed water do not show measurable differences between the aerosol and colloidal size distributions. This reduced reactivity to the solvent indicates that the presence of dissolved oxygen in the solvent may be responsible for the reactivity between the silicon nanoparticles and the solvent.     

Determination of particle size distributions with angström resolution

An analytical ultracentrifugation technique for the determination of particle-size distributions is used which applies an ultracentrifuge with a scanning absorption optical system. Radial scans during a sedimentation velocity experiment yield the particle-size distribution. If the particles consist of several defined monodisperse species, we show that for dense inorganic colloids the resolution of the particle-size distribution is in the angström range. This is demonstrated for a Pt colloid (0.4-2 nm) and unstabilized ZnO (4-9 nm) during particle growth. Such highly resolved particle-size distributions show that the analytical ultracentrifuge is an excellent and rapid tool for the study of particle growth mechanisms as no other fractionating analytical technique with almost atomar resolution is known up to now. Some potential applications arising from the applied ultracentrifuge technique are suggested.     

Silver colloid nanoparticles: synthesis, characterization, and their antibacterial activity

A one-step simple synthesis of silver colloid nanoparticles with controllable sizes is presented. In this synthesis, reduction of [Ag(NH(3))(2)](+) complex cation by four saccharides was performed. Four saccharides were used: two monosaccharides (glucose and galactose) and two disaccharides (maltose and lactose). The syntheses performed at various ammonia concentrations (0.005-0.20 mol L(-1)) and pH conditions (11.5-13.0) produced a wide range of particle sizes (25-450 nm) with narrow size distributions, especially at the lowest ammonia concentrations. The average size, size distribution, morphology, and structure of particles were determined by dynamic light scattering (DLS), transmission electron microscopy (TEM), and UV/Visible absorption spectrophotometry. The influence of the saccharide structure (monosacharides versus disaccharides) on the size of silver particles is briefly discussed. The reduction of [Ag(NH(3))(2)](+) by maltose produced silver particles with a narrow size distribution with an average size of 25 nm, which showed high antimicrobial and bactericidal activity against Gram-positive and Gram-negative bacteria, including highly multiresistant strains such as methicillin-resistant Staphylococcus aureus. Antibacterial activity of silver nanoparticles was found to be dependent on the size of silver particles. A very low concentration of silver (as low as 1.69 mug/mL Ag) gave antibacterial performance.     

Thermodynamic properties of nm-sized Pd and Ni particles

With decreasing size the density of electronic states of a metal particle becomes different from that of the bulk. This significantly changes the behaviour of the thermodynamic properties of such a particle. We present specific heat and spin susceptibiblity measurements on a series of chemically synthesized Pd particles with diameters of 2.4–15 nm and magnetic measurements on a Ni colloid with an average diameter of about 2.8 nm. Pronounced size dependence of the electronic magnetic properties was found which is accompanied by only weak size dependence of the electronic specific heat. This result can be understood in terms of a size-dependence of the Stoner enhancement factor, which only enters into the susceptibility and not into the specific heat.     

双亲性无规共聚物P（VM-co-AMPS）的自组装及其性能

以2-丙烯酰胺基-2-甲基丙磺酸（AMPS）和苯乙烯类光敏单体7-（4-乙烯基苄氧基）-4-甲基香豆素（VM）为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P（VM-co-AMPS）。P（VM-co-AMPS）在溶剂水中自组装胶束化,用原子力显微镜（AFM）表征了自组装胶体粒子的形态、粒径及其分布。紫外光照使胶体粒子中香豆素基元发生光二聚反应,用紫外-可见光分光光度计（UV-Vis）跟踪其光二聚交联过程,用光学显微镜考察了胶体粒子的乳化性能。结果表明：胶体粒子具有较好的紫外吸收性能和较好的乳化性能。该胶束制备工艺简单,条件温和,避免了溶剂的使用。     

Synthesis of micrometer-sized silica-stabilized polystyrene latex particles

Micrometer-sized silica-stabilized polystyrene latexes have been readily prepared by alcoholic dispersion polymerization using a 13 or 22 nm commercial alcoholic silica sol as the sole stabilizing agent. These resulting surfactant-free polystyrene particles have relatively narrow particle size distributions and contain surprisingly low levels of silica (相似文献   

Luminescent silole nanoparticles as chemoselective sensors for Cr(VI)

Colloidal suspensions of 3-aminopropylmethyl(tetraphenyl)silole nanoparticles can be used as selective chemosensors for carcinogenic chromium(VI) analyte. Methylhydrosilole is functionalized by hydrosilation of allylamine, and the colloid is prepared by the rapid addition of water to a THF solution of the silole. The method of detection is through electron-transfer quenching of the fluorescence of the silole colloid (lambda(em) = 485 nm at 360 nm excitation) by the analytes, with hundred parts per billion detection limits. Stern-Volmer plots are linear up to 10 ppm in the case of chromium, but exhibit saturation behavior near 5-10 ppm for arsenic. Dynamic light scattering experiments and AFM measurements show the particle sizes to be around 100 nm in diameter and dependent on solvent composition, with a particle size dispersity of +/-25%. The fluorescence lifetimes of the silole in solution and colloid are approximately 31 ps and approximately 4.3 ns, respectively, while the silole has a lifetime of 6 ns in the bulk solid. A minimum volume fraction of 80% water is necessary to precipitate the colloid from THF, and the luminescence continues to rise with higher water fractions. Colloids in a pH 7 phosphate-buffered suspension show both higher sensitivity and greater selectivity (100-fold) for CrO4(2-) detection than for other oxoanion interferents, NO3-, NO2-, SO4(2-), and ClO4-.