Equilibrium and Redox Kinetics of Copper(II)-Thiourea Complexes

Stopped-flow spectrophotometric measurements identify and determine equilibrium data for thiourea (tu) complexes of copper(II) formed in aqueous solution. In excess Cu(II), the complex ion [Cu(tu)](2+) has a stability constant beta(1) = 2.3 +/- 0.1 M(-)(1) and molar absorptivity at 340 nm of epsilon(1) = (4.0 +/- 0.2) x 10(3) M(-)(1) cm(-)(1) at 25.0 degrees C, 2.48 mM HClO(4), and &mgr; = 464 mM (NaClO(4)). The fast reduction of Cu(II) by excess tu obeys the rate law -d[Cu(II)]/dt = k'[Cu(II)](2)[tu](7) with a value for the ninth-order rate constant k' = (1.60 +/- 0.18) x 10(14) M(-)(8) s(-)(1), which derives from a rate-determining step involving the bimolecular decomposition of two complexed Cu(II) species. Copper(II) catalyzes the reduction of hexachloroiridate(IV) by tu according to the rate law -d[IrCl(6)(2)(-)]/dt = (k(2,unc)[tu](2) + k(1,cat) [tu](5)[Cu(II)])[IrCl(6)(2)(-)]. Least-squares analysis yields values of k(2,unc) and k(1,cat) equaling 385 +/- 4 M(-)(2) s(-)(1) and (3.7 +/- 0.1) x 10(13) M(-)(6) s(-)(1), respectively, at &mgr; = 115 mM (NaClO(4)). The corresponding mechanism has a rate-determining step that involves the oxidation of [Cu(II)(tu)(5)](2+) by [IrCl(6)](2)(-) rather than the bimolecular reaction of two cupric-tu complexes.     

Flash photolytic generation of ortho-quinone methide in aqueous solution and study of its chemistry in that medium

Flash photolysis of o-hydroxybenzyl alcohol, o-hydroxybenzyl p-cyanophenyl ether, and (o-hydroxybenzyl)trimethylammonium iodide in aqueous perchloric acid and sodium hydroxide solutions, and in acetic acid and biphosphate ion buffers, produced o-quinone methide as a short-lived transient species that underwent hydration back to benzyl alcohol in hydrogen-ion catalyzed (k(H+) = 8.4 x 10(5) M(-1) s(-1)) and hydroxide-ion catalyzed (k(HO)- = 3.0 x 10(4) M(-1) s(-1)) reactions as well as an uncatalyzed (k(UC) = 2.6 x 10(2) s(-1)) process. The hydrogen-ion catalyzed reaction gave the solvent isotope effect k(H+)/k(D)+ = 0.42, whose inverse nature indicates that this process occurs by rapid and reversible equilibrium protonation of the carbonyl oxygen atom of the quinone methide, followed by rate-determining capture of the carbocation so produced by water. The magnitude of the rate constant of the uncatalyzed reaction, on the other hand, indicates that this process occurs by simple nucleophilic addition of water to the methylene group of the quinone methide. Decay of the quinone methide is also accelerated by acetic acid buffers through both acid- and base-catalyzed pathways, and quantitative analysis of the reaction products formed in these solutions shows that this acceleration is caused by nucleophilic reactions of acetate ion rather than by acetate ion assisted hydration. Bromide and thiocyanate ions also accelerate decay of the quinone methide through both hydrogen-ion catalyzed and uncatalyzed pathways, and the inverse nature of solvent isotope effects on the hydrogen-ion catalyzed reactions shows that these reactions also occur by rapid equilibrium protonation of the quinone methide carbonyl oxygen followed by rate-determining nucleophilic capture of the ensuing carbocation. Assignment of an encounter-controlled value to the rate constant for the rate-determining step of the thiocyanate reaction leads to pK(a) = -1.7 for the acidity constant of the carbonyl-protonated quinone methide.     

General base and general acid catalyzed intramolecular aminolysis of esters. Cyclization of esters of 2-aminomethylbenzoic acid to phthalimidine

Plots of log k(0) vs pH for the cyclization of trifluoroethyl and phenyl 2-aminomethylbenzoate to phthalimidine at 30 degrees C in H(2)O are linear with slopes of 1.0 at pH >3. The values of the second-order rate constants k(OH) for apparent OH(-) catalysis in the cyclization reactions are 1.7 x 10(5) and 5.7 x 10(7) M(-)(1) s(-)(1), respectively. These rate constants are 10(5)- and 10(7)-fold greater than for alkaline hydrolysis of trifluoroethyl and phenyl benzoate. The k(OH) for cyclization of the methyl ester is 7.2 x 10(3) M(-)(1) s(-)(1). Bimolecular general base catalysis occurs in the intramolecular nucleophilic reactions of the neutral species. The value of the Bronsted coefficient beta for the trifluoroethyl ester is 0.7. The rate-limiting step in the general base catalyzed reaction involves proton transfer in concert with leaving group departure. The mechanism involving rate-determining proton transfer exemplified by the methyl ester in this series (beta = 1.0) can then be considered a limiting case of the concerted mechanism. General acid catalysis of the neutral species reaction or a kinetic equivalent also occurs when the leaving group is good (pK(a) 相似文献   

Kinetics of manganese(III) acetate in acetic acid: generation of Mn(III) with Co(III), Ce(IV), and dibromide radicals; reactions of Mn(III) with Mn(II), Co(II), hydrogen bromide,and alkali bromides

The reaction of cobalt(III) acetate with excess manganese(II) acetate in acetic acid occurs in two stages, since the two forms Co(IIIc) and Co(IIIs) are not rapidly equilibrated and thus react independently. The rate constants at 24.5 degrees C are kc = 37.1 +/- 0.6 L mol-1 s-1 and ks = 6.8 +/- 0.2 L mol-1 s-1 at 24.5 degrees C in glacial acetic acid. The Mn(III) produced forms a dinuclear complex with the excess of Mn(II). This was studied independently and is characterized by the rate constant (3.43 +/- 0.01) x 10(2) L mol-1 s-1 at 24.5 degrees C. A similar interaction between Mn(III) and Co(II) is substantially slower, with k = (3.73 +/- 0.05) x 10(-1) L mol-1 s-1 at 24.5 degrees C. Mn(II) is also oxidized by Ce(IV), according to the rate law -d[Ce(IV)]/dt = k[Mn(II)]2[Ce(IV)], where k = (6.0 +/- 0.2) x 10(4) L2 mol-2 s-1. The reaction between Mn(II) and HBr2., believed to be involved in the mechanism by which Mn(III) oxidizes HBr, was studied by laser photolysis; the rate constant is (1.48 +/- 0.04) x 10(8) L mol-1 s-1 at approximately 23 degrees C in HOAc. Oxidation of Co(II) by HBr2. has the rate constant (3.0 +/- 0.1) x 10(7) L mol-1 s-1. The oxidation of HBr by Mn(III) is second order with respect to [HBr]; k = (4.10 +/- 0.08) x 10(5) L2 mol-2 s-1 at 4.5 degrees C in 10% aqueous HOAc. Similar reactions with alkali metal bromides were studied; their rate constants are 17-23 times smaller. This noncomplementary reaction is believed to follow that rate law so that HBr2. and not Br. (higher in Gibbs energy by 0.3 V) can serve as the intermediate. The analysis of the reaction steps then requires that the oxidation of HBr2. to Br2 by Mn(III) be diffusion controlled, which is consistent with the driving force and seemingly minor reorganization.     

Thermodynamics and kinetics of the nickel(II)-salicylhydroxamic acid system. Phenol rotation induced by metal ion binding

The kinetics and the equilibria of Ni(II) binding to p-hydroxybenzohydroxamic acid (PHBHA) and salicylhydroxamic acid (SHA) have been investigated in an aqueous solution at 25 degrees C and I=0.2 M by the stopped-flow method. Two reaction paths involving metal binding to the neutral acid and to its anion have been observed. Concerning PHBHA, the rate constants of the forward and reverse steps are k1=(1.9+/-0.1)x10(3) M-1 s-1 and k-1=(1.1+/-0.1)x10(2) s-1 for the step involving the undissociated PHBHA and k2=(3.2+/-0.2)x10(4) M-1 s-1 and k-2=1.2+/-0.2 s-1 for the step involving the anion. Concerning SHA, the analogous rate constants are k1=(2.6+/-0.1)x10(3) M-1 s-1, k-1=(1.3+/-0.1)x10(3) s-1, k2=(5.4+/-0.2)x10(3) M-1 s-1, and k-2=6.3+/-0.5 s-1. These values indicate that metal binding to the anions of the two acids concurs with the Eigen-Wilkins mechanism and that the phenol oxygen is not involved in the chelation. Moreover, a slow effect was observed in the SHA-Ni(II) system, which has been put down to rotation of the benzene ring around the C-C bond. Quantum mechanical calculations at the B3LYP/lanL2DZ level reveal that the phenol group in the most stable form of the Ni(II) chelate is in trans position relative to the carbonyl oxygen, contrary to the free SHA structure, where the phenol and carbonyl oxygen atoms both have cis configuration. These results bear out the idea that the complex formation is coupled with phenol rotation around the C-C bond.     

Kinetic and thermodynamic aspects of the chain-breaking antioxidant activity of ascorbic acid derivatives in non-aqueous media

Ascorbic acid (vit. C) is a cofactor whose reactivity toward peroxyl and other radical species has a key-role in its biological function. At physiological pH it is dissociated to the corresponding anion. Derivatives of ascorbic acid, like ascorbyl palmitate, are widely employed in food or in cosmetics and pharmaceuticals. While the aqueous chemistry of ascorbate has long been investigated, in non-aqueous media it is largely unexplored. In this work oxygen-uptake kinetics, EPR and computational methods were combined to study the reaction of peroxyl radicals with two lipid-soluble derivatives: ascorbyl palmitate and 5,6-isopropylidene-l-ascorbic acid in non-aqueous solvents. In acetonitrile at 303 K the undissociated AscH(2) form of the two derivatives trapped peroxyl radicals with k(inh) of (8.4 ± 1.0) × 10(4) M(-1) s(-1), with stoichiometric factor of ca. 1 and isotope effect k(H)/k(D) = 3.0 ± 0.6, while in the presence of bases the anionic AscH(-) form had k(inh) of (5.0 ± 3.3) × 10(7) M(-1) s(-1). Reactivity was also enhanced in the presence of acetic acid and the mechanism is discussed. The difference in reactivity between the AscH(2)/AscH(-) forms was paralleled by a difference in O-H bond dissociation enthalpy, which was determined by EPR equilibrations as 81.0 ± 0.4 and 72.2 ± 0.4 kcal mol(-1) respectively for AscH(2) and AscH(-) in tert-butanol at 298 K. Gas-phase calculations for the neutral/anionic forms were in good agreement yielding 80.1/69.0 kcal mol(-1) using B3LYP/6-31+g(d,p) and 79.0/67.8 kcal mol(-1) at CBS-QB3 level. EPR spectra of ascorbyl palmitate in tBuOH consisted of a doublet with HSC = 0.45 G centred at g = 2.0050 for the neutral radical AscH˙ and a doublet of triplets with HSCs of 1.85 G, 0.18 G and 0.16 G centred at g = 2.0054 for Asc˙(-) radical anion.     

Kinetic isotope effect and extended pH-dependent studies of the oxidation of hydroxylamine by hexachloroiridate(IV): ET and PCET

The oxidation of hydroxylamine by [IrCl6]2- has been studied spectrophotometrically in deoxygenated aqueous solutions in the range of pH 4-9 at 25 degrees C. The reaction is catalyzed by Cu2+, Fe2+, and impurities of aquochloroiridium complexes. Oxalate is a very effective inhibitor of catalysis by copper and iron ions. With excess hydroxylamine, the reaction follows pseudo-first-order kinetics, and the stoichiometric ratio (DeltanIr(IV)/Deltanhydroxylamine) is 1.05 at pH 5.9. Over the pH range 4.2-8.8, the empirical rate law is -d[IrCl(6)2-]/dt=k[IrCl6(2-)][NH2OH]tot, with k=k1Ka1/([H+]+Ka1)+k'Ka1/([H+]([H+]+Ka1)), where Ka1 is the dissociation constant of NH3OH+. Least-squares fitting yields k1=(17.05+/-0.47) M-1 s(-1) and k'=(2.59+/-0.09)x10(-6) s(-1) at ionic strength of 0.1 M (adjusted by NaClO4) and 25 degrees C. The kinetic isotope effects (KIE) (kH/kD) for k1 and k' are 4.4 and 9.8, correspondingly. A mechanism is inferred in which k1 corresponds to concerted proton-coupled electron transfer (PCET) and k' corresponds to electron transfer from NH2O-. In this mechanism, the large KIE for k' is due almost entirely to the equilibrium isotope effect for the pKa of NH2OH.     

Reactivity of the organometallic fac-[(CO)3ReI(H2O)3]+ aquaion. Kinetic and thermodynamic properties of H2O substitution

The water exchange process on [(CO)(3)Re(H(2)O)(3)](+) (1) was kinetically investigated by (17)O NMR. The acidity dependence of the observed rate constant k(obs) was analyzed with a two pathways model in which k(ex) (k(ex)(298) = (6.3 +/- 0.1) x 10(-3) s(-1)) and k(OH) (k(OH)(298)= 27 +/- 1 s(-1)) denote the water exchange rate constants on 1 and on the monohydroxo species [(CO)(3)Re(I)(H(2)O)(2)(OH)], respectively. The kinetic contribution of the basic form was proved to be significant only at [H(+)] < 3 x 10(-3) M. Above this limiting [H(+)] concentration, kinetic investigations can be unambiguously conducted on the triaqua cation (1). The variable temperature study has led to the determination of the activation parameters Delta H(++)(ex) = 90 +/- 3 kJ mol(-1), Delta S(++)(ex) = +14 +/- 10 J K(-1) mol(-1), the latter being indicative of a dissociative activation mode for the water exchange process. To support this assumption, water substitution reaction on 1 has been followed by (17)O/(1)H/(13)C/(19)F NMR with ligands of various nucleophilicities (TFA, Br(-), CH(3)CN, Hbipy(+), Hphen(+), DMS, TU). With unidentate ligands, except Br(-), the mono-, bi-, and tricomplexes were formed by water substitution. With bidentate ligands, bipy and phen, the chelate complexes [(CO)(3)Re(H(2)O)(bipy)]CF(3)SO(3) (2) and [(CO)(3)Re(H(2)O)(phen)](NO(3))(0.5)(CF(3)SO(3))(0.5).H(2)O (3) were isolated and X-ray characterized. For each ligand, the calculated interchange rate constants k'(i) (2.9 x 10(-3) (TFA) < k'(I) < 41.5 x 10(-3) (TU) s(-1)) were found in the same order as the water exchange rate constant k(ex), the S-donor ligands being slightly more reactive. This result is indicative of I(d) mechanism for water exchange and complex formation, since larger variations of k'(i) are expected for an associatively activated mechanism.     

Solvolysis of 1,1-dimethyl-4-alkenyl chlorides: evidence for pi-participation

Tertiary 1,1-dimethyl-4-alkenyl chloride (1) solvolyzes with significantly reduced secondary beta-deuterium kinetic isotope effect (substrate with two trideuteromethyl groups) and has a lower entropy and enthalpy of activation than the referent saturated analogue 4 (k(H)/k(D) = 1.30 +/- 0.03 vs k(H)/k(D) = 1.79 +/- 0.01; Delta Delta H(++) = -9 kJ mol(-1), Delta Delta S(++) = -36 J mol(-1) K(-1), in 80% v/v aqueous ethanol), indicating participation of the double bond in the rate-determining step. Transition structure 1-TS computed at the MP2(fc)/6-31G(d) level of theory revealed that the reaction proceeds through a late transition state with considerably pronounced double bond participation and a substantially cleaved C-Cl bond. The doubly unsaturated compound 3 (1,1-dimethyl-4,8-alkadienyl chloride) solvolyzes with further reduction of the isotope effect, and a drastically lower entropy of activation (k(H)/k(D) = 1.14 +/- 0.01; DeltaS(++) = -152 +/- 12 J mol(-1) K(-1), in 80% v/v aqueous ethanol), suggesting that the solvolysis of 3 proceeds by way of extended pi-participation, i.e., the assistance of both double bonds in the rate-determining step.     

Flow-injection spectrophotometric determination of ascorbic acid in pharmaceutical products with the Prussian Blue reaction

A lot of modern analytical strategies for exploiting chemistries have been developed by using flow-injection analysis. However, even after 20 years of flow-injection evolution, there still are new quantitative procedures being established using old qualitative assays. The formation of Prussian Blue is a classical test to detect Fe(2+) using hexacyanoferrate(III) as a precipitating reagent. This reaction was evaluated for spectrophotometric determination of ascorbic acid employing Fe(3+) and hexacyanoferrate(III) as chromogenic reagents. An excess of the complexing anion avoids the formation of precipitate and forms a deep blue solution when Fe(3+) is reduced to Fe(2+) by ascorbic acid. The maximum absorbance of the colored complex occurs at 700 nm and the molar absorptivity is 3.0 x 10(4) 1 mol(-1) cm(-1). Under flow-injection conditions the Prussian Blue reaction was employed with an intermittent flow of an oxalate alkaline solution for removing the colored product adsorbed on tube and flow-cell walls. Reference solutions containing 5.0 x 10(-6)-1.0 x 10(-4) M of ascorbic acid were employed to obtain the analytical curve (r = 0.9999). For all solutions the relative standard deviation was lower than 1.0% (n=10). Results obtained for ascorbic acid determination in pharmaceutical products (Cewin, Redoxon and Cebion) are in good agreement with those obtained by using a flow-injection procedure involving the reaction between triiodide and ascorbic acid. The sampling frequency is 140 h(-1) and only 430 microl of reagents is consumed in each determination.     

Kinetics and mechanism of methane, methanol, and dimethyl ether C-H activation with electrophilic platinum complexes

The relative rates of C-H activation of methane, methanol, and dimethyl ether by [(N-N)PtMe(TFE-d(3))](+) ((N-N) = ArN=C(Me)-C(Me)=NAr; Ar = 3,5-di-tert-butylphenyl, TFE-d(3) = CF(3)CD(2)OD) (2(TFE)) were determined. Methane activation kinetics were conducted by reacting 2(TFE)-(13)C with 300-1000 psi of methane in single-crystal sapphire NMR tubes; clean second-order behavior was obtained (k = 1.6 +/- 0.4 x 10(-3) M(-1) s(-1) at 330 K; k = 2.7 +/- 0.2 x 10(-4) M(-1) s(-1) at 313 K). Addition of methanol to solutions of 2(TFE) rapidly establishes equilibrium between methanol (2(MeOD)) and trifluoroethanol (2(TFE)) adducts, with methanol binding preferentially (K(eq) = 0.0042 +/- 0.0006). C-H activation gives [(N-N)Pt(CH(2)OD)(MeOD)](+) (4), which is unstable and reacts with [(RO)B(C(6)F(5))(3)](-) to generate a pentafluorophenyl platinum complex. Analysis of kinetics data for reaction of 2 with methanol yields k = 2.0 +/- 0.2 x 10(-3) M(-1) s(-1) at 330 K, with a small kinetic isotope effect (k(H)/k(D) = 1.4 +/- 0.1). Reaction of dimethyl ether with 2(TFE) proceeds similarly (K(eq) = 0.023 +/- 0.002, 313 K; k = 5.5 +/- 0.5 x 10(-4) M(-1) s(-1), k(H)/k(D) = 1.5 +/- 0.1); the product obtained is a novel bis(alkylidene)-bridged platinum dimer, [(diimine)Pt(mu-CH(2))(mu-(CH(OCH(3)))Pt(diimine)](2+) (5). Displacement of TFE by a C-H bond appears to be the rate-determining step for all three substrates; comparison of the second-order rate constants (k((methane))/k((methanol)) = 1/1.3, 330 K; k((methane))/k((dimethy)(l e)(ther)) = 1/2.0, 313 K) shows that this step is relatively unselective for the C-H bonds of methane, methanol, or dimethyl ether. This low selectivity agrees with previous estimates for oxidations with aqueous tetrachloroplatinate(II)/hexachloroplatinate(IV), suggesting a similar rate-determining step for those reactions.     

NMR studies of phenylbenzohydroxamic acid and kinetics of complex formation with nickel(II)

The behavior of N-phenylbenzohydroxamic acid (PBHA) in organic solvents has been investigated by (1)H and (13)C NMR spectroscopy. Measurements in acetone at different temperatures and concentrations enable one to individualized two signals, in a 20/80 area ratio, which were ascribed to partition of PBHA between two isomers, HZ (cis) and HE (trans). The dependence of the low-intensity peak on concentration and temperature strongly suggests dimer formation. Since only the HZ form can give dimers, it may be concluded that in acetone PBHA is present mainly in the HE form. (13)C NMR measurements in methanol yielded a 50/50 [HZ]/[HE] ratio. The equilibria and kinetics of complex formation in aqueous solutions between Ni(II) and PBHA were investigated by spectrophotometric and stopped-flow techniques at 25 degrees C and 0.2 M ionic strength. Two reaction paths, involving the binding of Ni(2+) to the neutral PBHA and to its anion, were observed. The rate constants of the forward and reverse steps are k(1) = (7.1 +/- 0.3) x 10(2) M(-)(1) s(-)(1) and k(-1) = (4.9 +/- 0.6) s(-)(1) for the step involving the undissociated PBHA and k(2) = (5.5 +/- 0.7) x 10(4) M(-)(1) s(-)(1) and k(-2) = (1.2 +/- 0.1) s(-)(1) for the step involving the anion. The k(2) value indicates that the PBHA anion reacts with Ni(2+) according to Eigen's mechanism and that in water the cis form prevails. The k(1) value is lower by a factor of 13 compared to the value estimated on the basis of Eigen's mechanism, suggesting that at least 90% of the neutral ligand is present in a nonreactive conformation.     

Thermal stereomutations and stereochemically elucidated [1,3]-carbon sigmatropic shifts of 1-(E)-propenyl-2-methylcyclobutanes giving 3,4-dimethylcyclohexenes

The thermal stereomutations and [1,3] carbon sigmatropic shifts shown by (+)-(1S,2S)-trans-1-(E)-propenyl-2-methylcyclobutane and by (-)-(1S,2R)-cis-1-(E)-propenyl-2-methylcyclobutane in the gas phase at 275 degrees C leading to 3,4-dimethylcyclohexenes have been followed. The reaction-time-dependent data for concentrations and enantiomeric excess values for substrates and [1,3] shift products have been deconvoluted to afford rate constants for the discrete isomerization processes. Both trans and cis substrates react through four stereochemically distinct [1,3] carbon shift paths. For one enantiomer of the trans reactant the relative rate constants are k(si) = 58%, k(ar) = 5%, k(sr) = 33%, and k(ai) = 4%. For a single enantiomer of the cis reactant, k'(si) = 18%, k'(ar) = 11%, k'(sr) = 51%, and k'(ai) = 20%. A trans starting material reacts through orbital symmetry allowed suprafacial,inversion and antarafacial,retention paths to give trans-3,4-dimethylcyclohexenes 63% of the time. A cis isomer reacts to give the more stable trans-3,4-dimethylcyclohexenes through orbital symmetry-forbidden suprafacial,retention and antarafacial,inversionpaths 71% of the time. The [1,3] carbon sigmatropic shifts are not controlled by orbital symmetry constraints. They seem more plausible rationalized as proceeding through diradical intermediates having some conformational flexibility after formation and before encountering an exit channel. The distribution of stereochemical outcomes may well be conditioned by dynamic effects. The thermal stereomutations of the 1-(E)-propenyl-2-methylcyclobutanes take place primarily through one-center epimerizations. For the trans substrate, the relative importance of the three distinction rate constants are k(2) = 48%, k(1) = 34%, and k(12) = 18%. For the cis isomer, k'(2) = 44%, k'(1) = 32%, and k'(12) = 24%. These patterns are reminiscent of ones determined for stereomutations in 1,2-disubstitued cyclopropanes.     

Multiple isotope effect study of the acid-catalyzed hydrolysis of methyl formate

Multiple isotope effects have been measured for the acid-catalyzed hydrolysis of methyl formate in 0.5 M HCl at 20 degrees C. The isotope effects in the present investigation include the carbonyl carbon (13k = 1.028 +/- 0.001), the carbonyl oxygen (18k = 0.9945 +/- 0.0009), the nucleophile oxygen (18k = 0.995 +/- 0.001), and the formyl hydrogen ((D)k = 0.81 +/- 0.02). Determination of the carbonyl carbon, carbonyl oxygen, and formyl hydrogen isotope effects was performed via isotopic analysis of residual substrate. However, determination of the oxygen nucleophile isotope effect required analysis of the oxygen atoms of the product (formic acid), which exchange with the solvent (water) under acid conditions. This necessitated measurement of the rate of exchange of these oxygen atoms under the conditions for hydrolysis (k(ex) = 0.0723 min(-1)) and correction of the raw isotope ratios measured during the nucleophile-O isotope effect experiment. These results, along with the previously reported isotope effect for the leaving oxygen (18k = 1.0009) and the ratio of the rate of hydrolysis to that of exchange of the carbonyl oxygen with water (k(h)/k(ex) = 11.3), give a detailed picture of the transition-state structure for the reaction.     

Electron transfer. 144. Reductions with germanium(II)

Solutions 0.2-0.4 M in Ge(II) and 6 M in HCl, generated by reaction of Ge(IV) with H3PO2, are stable for more than 3 weeks and can be diluted 200-fold with dilute HCl to give GeCl3- preparations to be used in redox studies. Kinetic profiles for the reduction of Fe(III) by Ge(II), as catalyzed by Cu(II), implicate the odd-electron intermediate, Ge(III), which is formed from Cu(II) and Ge(II) (k = 30 M-1 s-1 in 0.5 M HCl at 24 degrees C) and which is consumed by reaction with Fe(III) (k = 6 x 10(2) M-1 s-1). A slower direct reaction between Ge(II) and Fe(III) (k = 0.66 M-1 s-1) can be detected in 1.0 M HCl. The reaction of Ge(II) with I3- in 0.01-0.50 M iodide is zero order in oxidant and appears to proceed via a rate-determining heterolysis of a Ge(II)-OH2 species (k = 0.045 s-1) which is subject to H(+)-catalysis. Reductions of IrCl6(2-) and PtCl6(2-) by Ge(II) are strongly Cl(-)-catalyzed. The Ir(IV) reaction proceeds through a pair of 1e- changes, of which the initial conversion to Ge(III) is rate-determining, whereas the Pt(IV) oxidant probably utilizes (at least in part) an inner-sphere PtIV-Cl-GeII bridge in which chlorine is transferred (as Cl+) from oxidant to reductant. The 2e- reagent, Ge(II), like its 5s2 counterpart, In(I), can partake in 1e- transactions, but requires more severe constraints: the coreagent must be more powerfully oxidizing and the reaction medium more halide-rich.     

Kinetics and Mechanism of the Formation and Acid Dissociation of Cobalt(II), Nickel(II), and Copper(II) Complexes with the Highly Enolized beta-Diketone 3-(N-Acetylamido)pentane-2,4-dione (=Hamac) in Aqueous Solution

The beta-diketone Hamac = 3-(N-acetylamido)pentane-2,4-dione was characterized by potentiometric, spectrophotometric, and kinetic methods. In water, Hamac is very soluble (2.45 M) and strongly enolized, with [enol]/[ketone] = 2.4 +/- 0.1. The pK(a) of Hamac is 7.01 +/- 0.07, and the rate constants for enolization, k(e), and ketonization, k(k), at 298 K are 0.0172 +/- 0.0004 s(-1) and 0.0074 +/- 0.0015 s(-1), respectively. An X-ray structure analysis of the copper(II) complex Cu(amac)(2).toluene (=C(21)H(28)CuN(2)O(6); monoclinic, C2/c; a = 20.434(6), b = 11.674(4), c = 19.278(6) ?; beta = 100.75(1) degrees; Z = 8; R(w) = 0.0596) was carried out. The bidentate anions amac(-) coordinate the copper via the two diketo oxygen atoms to form a slightly distorted planar CuO(4) coordination core. Rapid-scan stopped-flow spectrophotometry was used to study the kinetics of the reaction of divalent metal ions M(2+) (M = Ni,Co,Cu) with Hamac in buffered aqueous solution at variable pH and I = 0.5 M (NaClO(4)) under pseudo-first-order conditions ([M(2+)](0) > [Hamac](0)) to form the mono complex M(amac)(+). For all three metals the reaction is biphasic. The absorbance/time data can be fitted to the sum of two exponentials, which leads to first-order rate constants k(f) (fast initial step) and k(s) (slower second step). The temperature dependence of k(f) and k(s) was measured. It follows from the kinetic data that (i) the keto tautomer of Hamac, HK, does not react with the metal ions M(2+), (ii) the rate constant k(f) increases linearly with [M(2+)](0) according to k(f) = k(0) + k(2)[M(2+)](0), and (iii) the rate constant k(s) does not depend on [M(2+)](0) and describes the enolization of the unreactive keto tautomer HK. The pH dependence of the second-order rate constant k(2) reveals that both the enol tautomer of Hamac, HE, and the enolate, E(-), react with M(2+) in a second-order reaction to form the species M(amac)(+). At 298 K rate constants k(HE) are 18 +/- 6 (Ni), 180 +/- 350 (Co), and (9 +/- 5) x 10(4) (Cu) M(-1) s(-1) and rate constants k(E) are 924 +/- 6 (Ni), (7.4 +/- 0.6) x 10(4) (Co), and (8.4 +/- 0.2) x 10(8) (Cu) M(-1) s(-1). The acid dissociation of the species M(amac)(+) is triphasic. Very rapid protonation (first step) leads to M(Hamac)(2+), which is followed by dissociation of M(Hamac)(2+) and M(amac)(+), respectively (second step). The liberated enol Hamac ketonizes (third step). The mechanistic implications of the metal dependence of rate constants k(HE), k(E), k(-HE), and k(-E) are discussed.     

Extraction of gallium(III) by 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions

The extraction of gallium(III) with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2- yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions into toluene was studied. It was found that gallium( III) was efficiently extracted from 5–10 M solutions of HCl by the anion-exchange mechanism. The following metal extraction order was determined in the above aqueous phase acidity range: Ga(III) > In(III) > Al(III). The concentration constants and the thermodynamic parameters of the reaction of gallium(III) extraction from 6 M solutions of HCl at 25 °C were calculated.     

Imido transfer from bis(imido)ruthenium(VI) porphyrins to hydrocarbons: effect of imido substituents, C-H bond dissociation energies, and Ru(VI/V) reduction potentials

[Ru(VI)(TMP)(NSO2R)2] (SO2R = Ms, Ts, Bs, Cs, Ns; R = p-C6H4OMe, p-C6H4Me, C6H5, p-C6H4Cl, p-C6H4NO2, respectively) and [Ru(VI)(Por)(NTs)2] (Por = 2,6-Cl2TPP, F20-TPP) were prepared by the reactions of [Ru(II)(Por)(CO)] with PhI=NSO2R in CH2Cl2. These complexes exhibit reversible Ru(VI/V) couple with E(1/2) = -0.41 to -0.12 V vs Cp2Fe(+/0) and undergo imido transfer reactions with styrenes, norbornene, cis-cyclooctene, indene, ethylbenzenes, cumene, 9,10-dihydroanthracene, xanthene, cyclohexene, toluene, and tetrahydrofuran to afford aziridines or amides in up to 85% yields. The second-order rate constants (k2) of the aziridination/amidation reactions at 298 K were determined to be (2.6 +/- 0.1) x 10(-5) to 14.4 +/- 0.6 dm3 mol(-1) s(-1), which generally increase with increasing Ru(VI/V) reduction potential of the imido complexes and decreasing C-H bond dissociation energy (BDE) of the hydrocarbons. A linear correlation was observed between log k' (k' is the k2 value divided by the number of reactive hydrogens) and BDE and between log k2 and E(1/2)(Ru(VI/V)); the linearity in the former case supports a H-atom abstraction mechanism. The amidation by [Ru(VI)(TMP)(NNs)2] reverses the thermodynamic reactivity order cumene > ethylbenzene/toluene, with k'(tertiary C-H)/k'(secondary C-H) = 0.2 and k'(tertiary C-H)/k'(primary C-H) = 0.8.     

A promising methyl ester of pectic acid polysaccharide in biomedicine and pharmaceutics applications: Oxidation of methyl ester of pectic acid by alkaline hexacyanoferrate(III). A kinetic and mechanistic orientation

The oxidation of methyl ester of pectic acid (pectin) (PEC) by a hexacyanoferrate(III) ion at a constant ionic strength of 0.1 mol dm⁻³ has been investigated spectrophotometrically. The oxidation rates were found to increase with increasing the alkali concentration, indicating that the nature of reaction was base catalyzed. The agreement of [pectin] dependence of the rate constants to the Michaelis-Menten kinetics proves the formation of 1:1 intermediate complex prior to the rate-determining step. The deviation of the pseudo–first-order curves from linearity after 65-70% of reaction completion indicates the interference of some oxidation products during the reaction progression. The oxidation process was proceeding via a free-radical intervention mechanism. The activation parameters have been evaluated, and a suitable reaction mechanism is suggested and discussed.     

Oxidation of chlorine(III) by hypobromous acid: kinetics and mechanism

The kinetics and mechanism of the chlorine(III)-HOBr reaction were studied by the stopped-flow method under acidic conditions, pH 1.0-3.0, in 1.0 M NaClO(4) and at 25.0 degrees C. The overall redox process occurs in two consecutive steps via the formation of the BrClO(2) intermediate. The electron transfer reactions are coupled with bromine hydrolysis, the formation of the tribromide ion, and the protolytic equilibrium of chlorine(III). On the basis of simultaneous evaluation of the kinetic traces, the following rate constants were obtained for the redox steps: HClO(2) + HOBr right harpoon over left harpoon BrClO(2) + H(2)O, k(3) = (3.34 +/- 0.02) x 10(4) M(-1) s(-1), k(-3) = (3.5 +/- 1.3) x 10(3) s(-1); BrClO(2) + ClO(2)(-)<==>2ClO(2) + Br(-), k(4) = (2.9 +/- 1.0) x 10(7) M(-1) s(-1). The second step was practically irreversible under the conditions applied, and the value of k(-4) could not be determined. The equilibrium constant for the formation of BrClO(2), K(3) = 9.5 M(-1), was calculated from the kinetic results, and it was confirmed that this species is a very powerful oxidant. The redox potential was also estimated for the BrClO(2) + e(-) = Br(-) + ClO(2) reaction: epsilon(0) approximately 1.70 V.