The role of exciton hopping and direct energy transfer in the efficient quenching of conjugated polyelectrolytes

The dynamics of fluorescence quenching of a conjugated polyelectrolyte by a cyanine dye are investigated by femtosecond fluorescence up-conversion and polarization resolved transient absorption. The data are analyzed with a model based on the random walk of the exciton within the polymer chain and a long-range direct energy transfer between polymer and dye. We find that rapid intrachain energy migration toward complex sites with the dye leads to the highly efficient energy transfer, whereas the contribution from direct, long-range energy transfer is negligible. We determine the actual density of complexes with the dye along the polymer chain. A clear deviation from calculations based on a constant complex association constant is found and explained by a reduced effective polymer concentration due to aggregation. Altogether, the quenching efficiency is found to be limited by (i) the energetic disorder within the polymer chain and (ii) the formation of loose polymer aggregates.     

Hole-induced quenching of triplet and singlet excitons in conjugated polymers

Quantitative information on the mechanisms and rates of hole (radical cation)-induced quenching of triplet and singlet excitons in the conjugated polymer poly[2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene] has been acquired by a new technique, fluorescence-voltage time-resolved single molecule spectroscopy (FV-TR-SMS). FV-TR-SMS measures the fluorescence intensity of a single conjugated polymer molecule that is embedded in a capacitor-like device while simultaneously modulating the bias on the device and the irradiation intensity. The results demonstrate that triplet excitons are efficiently quenched by holes in conjugated polymers for hole densities >10(16) charges/cm(3), while singlet excitons are quenched with a much lower efficiency. Detailed kinetic analysis shows that the greater efficiency for quenching of triplets by holes (compared to that for singlets) is due to a >10(6) times longer exciton lifetime for triplets. In fact, the results suggest that while singlet quenching is less efficient due to a much shorter singlet lifetime, the rate constant for the quenching of singlets by holes actually exceeds that for triplets by several orders of magnitude.     

Redistribution of emitting state population in conjugated polymers probed by single-molecule fluorescence polarization spectroscopy

Fluctuations in the fluorescence polarization degree and direction are reported for the first time for single conjugated polymer molecules embedded in a polystyrene matrix at room temperature. The polymer molecule, a polythiophene derivative, clearly emits as a multi-chromophore ensemble showing that the energy does not funnel to any specific low-energy trap. The fluorescence instead originates from thermally populated exciton states with different relative orientations of the transition dipole moments. The fluctuations in the fluorescence polarization are explained in terms of changes in the relative contributions of the different exciton states to the signal due to conformational fluctuations of the molecule or selective exciton quenching by triplet states.     

Conjugation enhancement of intramolecular exciton migration in poly(p-phenylene ethynylene)s

Efficient energy migration in conjugated polymers is critical to their performance in photovoltaic, display, and sensor devices. The ability to precisely control the polymer conformation is a key issue for the experimental investigations and deeper understanding of the nature of this process. We make use of specially designed iptycene-containing poly(p-phenylene ethynylene)s that display chain-extended conformations when dissolved in nematic liquid crystalline solvents. In these solutions, the polymers show a substantial enhancement in the intrachain exciton migration rate, which is attributed to their increased conjugation length and better alignment. The organizational enhancement of the energy transfer efficiency, as determined by site-selective emission from lower energy traps at the polymer termini, is accompanied by a significant increase of the fluorescence quantum yield. The liquid crystalline phase is a necessary requirement for these phenomena to occur, and when the temperature was increased above the nematic-isotropic transition, we observed a dramatic reduction of the energy transfer efficiency and fluorescence quantum yield. The ability to improve the exciton migration efficiency through precise control of the polymer structure with liquid crystalline solutions demonstrates the importance of a polymer's conformation for energy transfer, and provides a way to improve the energy transporting performance of conjugated polymers.     

Efficient light harvesting in dye-endcapped conjugated polymers probed by single molecule spectroscopy

The development of sophisticated microscopic models of energy transfer in linear multichromophoric systems such as conjugated polymers is rarely matched by suitable experimental studies on the microscopic level. To assess the roles of structural, temporal, and energetic disorder in energy transfer, single molecule spectroscopic investigations of the elementary processes leading to energetic relaxation in conjugated polymers are desirable. We present a detailed study of energy transfer processes occurring in dye-endcapped conjugated polymer molecules on the single molecule level. These processes are mostly masked in ensemble investigations. Highly efficient intramolecular energy transfer along a single polyindenofluorene chain to a perylene endcap occurs in many instances and is resolved in real time. We further consider the spectral emission characteristics of the single molecule, the polarization anisotropy which reveals the chain conformation, the fluorescence intermittency, and the temperature dependence and conclude that the efficiency of energy transfer in the ensemble is controlled by the statistics of the individual molecules. The weak thermal activation of energy transfer indicates the involvement of vibrational modes in interchromophoric coupling. Whereas backbone-endcap coupling is strong, the rate-limiting step for intramolecular energy transfer is the migration along the backbone. The results are particularly relevant to understanding undesired exciton trapping on fluorenone defects in polyfluorenes.     

Energy migration and transfer in poly(phenylacetylene)

Studies have been made of energy migration and transfer in dilute solutions of poly(phenylacetylene). In fluid media, “down-chain” energy migration is very efficient (being limited only by chain length in the system studied); however, in a rigid matrix, the energy migration rate is significantly lower. It is suggested that segmental rotation in a fluid environment brings neighbouring chain units into conformations suitable for resonance energy transfer and also breaks conjugated sequences functioning as exciton “traps”. The broad absorption spectrum (and relatively high extinction coefficients) coupled with the efficient transfer of the energy make these substances very efficient energy transfer additives in polymer systems.     

Photoluminescence Intensity Fluctuations and Electric‐Field‐Induced Photoluminescence Quenching in Individual Nanoclusters of Poly(phenylenevinylene)

Substantial fluctuations of the fluorescence intensity have been detected for single clusters of poly(phenylenevinylene) containing more than 75 polymer chains or 30 000 monomer units. To the best of our knowledge, this is the first time such fluctuations (which resemble the “blinking” effect in single‐molecule fluorescence) have been reported for such a large molecular ensemble containing several macromolecules. Together with the distinct jumps, smooth fluctuations of the fluorescence intensity, with characteristic times from milliseconds to seconds, were observed. This fact distinguishes the fluorescence behaviour of the polymer clusters from that of other multichromophoric systems such as the single chains of conjugated polymers reported in the literature. The consecutive or simultaneous switching of one or several emitting sites from the “on” to “off” state does not explain the character of the fluctuations observed. We suggest that the quenching of the light‐emitting exciton by a long‐lived species, such as, for example, polarons, plays an important role in these unusual fluctuations. Electric field induced fluorescence quenching differs significantly for different clusters. It is proposed that this fluorescence was mainly quenched by polarons injected from the electrodes in the presence of an electric field. The specific behaviour of each cluster is explained by suggesting a different position of the clusters with respect to the electrodes.     

Swelling-controlled polymer phase and fluorescence properties of polyfluorene nanoparticles

Highly fluorescent nanoparticles of the conjugated polymer poly(9,9-dioctylfluorene) (PFO) with distinct phases were prepared, and their photophysical properties were studied by steady state and time-resolved fluorescence spectroscopy. An aqueous suspension of PFO nanoparticles prepared by a reprecipitation method was observed to exhibit spectroscopic characteristics consistent with the glassy phase of the polymer. We demonstrate that controlled addition of organic solvent leads to partial transformation of the disordered polymer chains into the planarized conformation (beta-phase), with the fractions of each component phase dependent on the amount of solvent added. Fluorescence spectroscopy of the PFO nanoparticles containing beta-phase indicates efficient energy transfer from the glassy-phase regions of the nanoparticles to the beta-phase regions. Salient features of the nanoparticles containing beta-phase include narrow, red-shifted fluorescence and increased fluorescence quantum yield as compared to the glassy-phase nanoparticles. Fluorescence lifetime measurements indicate that the increased quantum yield of the beta-phase PFO originates from a decrease in the nonradiative decay rate, with little change in the radiative rate. This decrease is likely due to exciton trapping by the beta-phase, which leads to a reduction in the energy transfer efficiency to quencher species present within the nanoparticle.     

Single molecule studies of calix[4]arene-linked perylene bisimide dimers: relationship between blinking, lifetime and/or spectral fluctuations

We recorded fluorescence time traces, and simultaneously either the fluorescence lifetime or the emission spectra from single perylene bisimide (PBI) dimers embedded in a polystyrene matrix. In these traces three distinct intensity levels can be distinguished, which reflect the photo-induced radicalisation of one of the perylene subunits. Differences in the energy transfer rate between the neutral PBI and the reversibly formed radical anion give rise to variations in the chronological order of the appearance of the intensity levels, which allowed us to categorise the time traces into three distinct groups: Type 1 blinking corresponds to a high energy transfer rate, type 2 blinking to fluctuations between large and small transfer rates (dynamic quenching), and type 3 blinking results from small energy transfer rates together with Coulomb blockade. The information that we obtain from the distributions of the fluorescence lifetimes at the various signal levels allows us to relate these differences to properties of the local polymer environment of the dimers.     

Studies of photoinduced electron transfer and energy migration in a conjugated polymer system for fluorescence "turn-on" chemosensor applications

A series of poly[p-(phenyleneethynylene)-alt-(thienyleneethynylene)] (PPETE) polymers with variable percent loadings of the N,N,N'-trimethylethylenediamino group on the polymer backbone were synthesized and fully characterized. Photophysical studies show that changes in the loading of the amino group receptor on the backbone do not affect the polymer electronic structure in either the ground or excited states. The fluorescence quantum yields were found to be directly related to the loading of the amino groups and can be modeled by a Stern-Volmer type relationship. Photophysical studies related the total quenching efficiency to the inherent rate of photoinduced electron transfer (PET), the lifetime of the exciton, the rate of excitation energy migration along the polymer backbone, and the total loading of the receptor on the polymer. The role of the loading dependence on the application of these polymers as fluorescence "turn-on" sensors for toxic metal cations in dilute solution was also studied. Results showed that the fluorescence enhancement upon binding various cations was maintained even when the amino receptor loading along the polymer backbone was reduced.     

Fluorescence Study of Energy Transfer in PMMA Polymers with Pendant Oligo‐Phenylene‐Ethynylenes

A spectroscopic characterization of polymers containing rigid π‐conjugated oligo(phenyleneethynylene) chromophores as well as oligo(phenyleneethynylene) and methyl methacrylate is presented. The polymers exhibit molar masses of up to 15 000 g mol^?1 and a degree of polymerization between 22 and 80. Emission measurements of the monomeric and polymeric species show that radiative as well as nonradiative rates are influenced by the degree of polymerization due to intramolecular interactions of chromophores pendant to the polymer backbone. Time‐resolved emission anisotropy measurements suggest that energy migrates within the polymers. Steady‐state emission anisotropy measurements also point to energy migration. Additionally, two oligo(phenyleneethynylene)s with different sizes of the conjugated system are copolymerized in order to enable energy trapping due to energy transfer. The shortened energy‐donor fluorescence lifetime within the donor–acceptor copolymers suggest energy transfer. Depending on the degree of polymerization, dispersion of the donor fluorescence lifetime is observed.     

Efficient light-harvesting,energy migration,and charge transfer by nanographene-based nonfullerene small-molecule acceptors exhibiting unusually long excited-state lifetime in the film state

Electron-acceptor small-molecules possessing a long exciton lifetime and a narrow energy band gap, opposing the energy gap law, are highly desirable for high-performance organic photovoltaics (OPVs) by realizing their efficient light-harvesting ability (LH), exciton diffusion (ED), and charge transfer (CT). Toward this goal, we designed an acceptor–donor–acceptor (A–D–A) type nonfullerene acceptor (NFA), TACIC, having an electron-donating, self-assembling two-dimensional (2D) nanographene unit, thienoazacoronene, at the center with electron-withdrawing groups at both ends. The TACIC film exhibited a narrow band gap (1.59 eV) with excellent LH. Surprisingly, the TACIC film showed an extremely long exciton lifetime (1.59 ns), suppressing undesirable nonradiative decay by its unique self-assembling behavior. When combined with a conjugated polymer donor, PBDB-T, slow ED and CT were observed (60 ps) with the excitation of TACIC owing to the large TACIC domain sizes. Nevertheless, the unusually high efficiencies of ED and CT (96% in total) were achieved by the long TACIC exciton lifetime. Additionally, unusual energy transfer (EnT) from the excited PBDB-T to TACIC was seen, demonstrating its dual LH role. The OPV device with PBDB-T and TACIC showed a high incident photon-to-current efficiency (IPCE) exceeding 70% at up to 710 nm and a power conversion efficiency of ∼10%. This result will open up avenues for a rational strategy of OPVs where LH, ED, and CT from the acceptor side as well as LH, EnT, ED, and CT from the donor side can be better designed by using 2D nanographene as a promising building block for high-performance A–D–A type NFAs.

A nonfullerene acceptor, TACIC, showed efficient light-harvesting, exciton diffusion, and charge transfer.     

A study on the energy transfer and migration in the molecules of polymeric triplet sensitizers: (2) A study on delay fluorescence and polarization spectra

The triplet energy migration of polymers and copolymers of vinyl benzophenone (VBP) and vinyl naphthalene (VN) has been studied by measuring delayed fluorescence and polarization spectra in glassy dilute solution at 77 K. Strong delayed fluorescence of PVN proves the existence of triplet energy migration and T-T annihilation in the polymer chain. Efficient intersystem crossing of “BP” and efficient energy migration and transfer between chromophores along the polymer chain result in the absence of delayed fluorescence for copolymer P (VN-VBP) studied in this work. The order of benzophenone phosphorescence intensity: BP>Co (VBP-St)>PVBP indicates the T-T annihilation decreasing the phosphorescence of PVBP. Fluorescence and phosphorescence polarization data of polymers are smaller than that of their model compounds. It is evident that energy migration exists in the polymer chain.     

Molecular weight dependence of emission intensity and emitting sites distribution within single conjugated polymer molecules

We investigated exciton migration, trapping and emission processes occurring within a single conjugated polymer molecule by means of superresolution fluorescence localization microscopy. This methodology allowed us to locate the spatial distribution of emitting sites within single chains with nanometre precision. The study was done on individual poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) molecules with average molecular weights ranging from 215,000 to 1,440,000 and with narrow weight distributions. We found that the mean emission intensity increases proportionally to the polymer molecular weight. The localization experiments suggest that the emitting sites are distributed nearly uniformly within a single chain and that the sites are on average 10 nm apart, irrespective of the molecular weight of the polymer. Furthermore, spatial contours formed by all the combined emitting sites within one chain show elongated shapes, in agreement with a rod-like structure of MEH-PPV in a collapsed state.     

Structure—Property relationships for exciton transfer in conjugated polymers

The ability of conjugated polymers to function as electronic materials is dependent on the efficient transport of excitons along the polymer chain. Generally, the photophysics of the chromophore monomer dictate the excited state behavior of the corresponding conjugated polymers. Different molecular structures are examined to study the role of excited state lifetimes and molecular conformations on energy transfer. The incorporation of rigid, three‐dimensional scaffolds, such as iptycenes and cyclophanes, can encourage an oblique packing of the chromophore units of a conjugated polymer, thus allowing the formation of electronically‐coupled aggregates that retain high quantum yields of emission. Rigid iptycene scaffolds also act as excellent structural directors that encourage complete solvation of PPEs in a liquid crystal (LC) solvent. LC‐PPE mixtures display both an enhanced conformational alignment of polymer chains and extended effective conjugation lengths relative to isotropic solutions, which leads to enhanced energy transfer. Facile exciton migration in poly(p‐phenylene ethynylene)s (PPEs) allows energy absorbed over large areas to be funneled into traps created by the binding of analytes, resulting in signal amplification in sensory devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Conformational fluctuations and large fluorescence spectral diffusion in conjugated polymer single chains at low temperatures

The fluorescence of single chains of the conductive polymer poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) was studied by means of single-molecule spectroscopy at 15 K. MEH-PPV was deposited onto a surface from a toluene solution and covered with a polymer cap layer of poly(vinyl alcohol) spin-coated from an aqueous solution for protection against air. Because MEH-PPV is insoluble in water, such sample preparation guarantees that MEH-PPV chains do not mix with the cap polymer. We found that this "host matrix free" environment results in substantially stronger fluorescence spectral diffusion than that observed for conjugated polymer single chains embedded into polymer matrices. The average spectral diffusion range was 500 cm(-1), and the maximum registered value reached 1100 cm(-1), which is approximately 6 times larger than the values reported before. We analyzed spectral diffusion by observation of temporal evolution of the fluorescence intensity, the position of the maximum, and the width of fluorescence spectra. We propose that the transition energy shifts are caused by the differences of the London dispersive forces in slightly different polymer chain conformations. Such conformational changes are possible even at low temperatures because the MEH-PPV single chains in our samples have more freedom for fluctuations than in the usual "in host" arrangement.     

Optoelectronic and charge transport properties at organic-organic semiconductor interfaces: comparison between polyfluorene-based polymer blend and copolymer

We report detailed studies of optoelectronic and charge transport properties at the organic-organic semiconductor interfaces formed between polymer chains (interchain) and within a polymer chain (intrachain). These interfaces are fabricated using poly(9,9-di-n-octylfluorene-alt-N-(4-butylphenyl)diphenylamine) (TFB [f8-tfb]) (electron-donor) and poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT [f8-bt]) (electron-acceptor) conjugated polymers, by blending them together or by covalently attaching them via a main polymer backbone (copolymer). For optoelectronic properties, when a bulky and twisted tfb molecule is incorporated into a rigid F8BT conjugated backbone, it disturbs the conjugation of F8BT polymer, leading to a blue-shift in the lowest absorption transition. However, by acting as an effective electron donor, it assists the formation of an intrachain singlet exciton that has a strong charge-transfer character, leading to a red-shifted and longer-lived emission than that of F8BT. An extremely efficient and fast energy transfer from tfb donor to bt acceptor is observed in the copolymer (<1 ps) compared to transfer from TFB to F8BT in the blend (tens of ps). This efficient energy transfer in the copolymer is found to be associated with its low fluorescence efficiency (40-45% vs 60-65% for blend) because of the migration of radiative singlet excitons to low-energy states such as triplet and exciplex states that are nonemissive or weakly emissive. The presence of molecular-scale tfb-f8-bt interfaces in the copolymer, however, does not hinder an efficient transport of charge carriers at high drive voltages. Instead, it provides a better balance of charge carriers inside the device, which leads to slower decay of the device efficiency and thus more stable light-emitting diodes with increasing voltage than the blend devices. These distinctive optoelectronic and charge transport properties observed at different organic-organic semiconductor interfaces will provide useful input for the design rules of conjugated polymers required for improved molecular electronics.     

Channeling Exciton Migration into Electron Transfer in Formamidinium Lead Bromide Perovskite Nanocrystal/Fullerene Composites

Hydrophobically capped nanocrystals of formamidinium lead bromide (FAPbBr₃) perovskite (PNC) show bright and stable fluorescence in solution and thin‐film states. When compared with isolated PNCs in a solution, close‐packed PNCs in a thin film show extended fluorescence lifetime (ca. 4.2 μs), which is due to hopping or migration of photogenerated excitons among PNCs. Both fluorescence quantum efficiency and lifetime decrease in a PNC thin film doped with fullerene (C₆₀), which is attributed to channeling of exciton migration into electron transfer to C₆₀. On the other hand, quenching of fluorescence intensity of a PNC solution is not accompanied by any change in fluorescence lifetime, indicating static electron transfer to C₆₀ adsorbed onto the hydrophobic surface of individual PNCs. Exciton migration among close‐packed PNCs and electron transfer to C₆₀ places C₆₀‐doped PNC thin films among cost‐effective antenna systems for solar cells.     

Light-emitting conjugated polymers with microporous network architecture: interweaving scaffold promotes electronic conjugation, facilitates exciton migration, and improves luminescence

Herein we report a strategy for the design of highly luminescent conjugated polymers by restricting rotation of the polymer building blocks through a microporous network architecture. We demonstrate this concept using tetraphenylethene (TPE) as a building block to construct a light-emitting conjugated microporous polymer. The interlocked network successfully restricted the rotation of the phenyl units, which are the major cause of fluorescence deactivation in TPE, thus providing intrinsic luminescence activity for the polymers. We show positive "CMP effects" that the network promotes π-conjugation, facilitates exciton migration, and improves luminescence activity. Although the monomer and linear polymer analogue in solvents are nonemissive, the network polymers are highly luminescent in various solvents and the solid state. Because emission losses due to rotation are ubiquitous among small chromophores, this strategy can be generalized for the de novo design of light-emitting materials by integrating the chromophores into an interlocked network architecture.     

Singlet-triplet and triplet-triplet interactions in conjugated polymer single molecules

Single molecule fluorescence correlation spectroscopy has been used to investigate the photodynamics of isolated single multichromophoric polymer chains of the conjugated polymers MEH-PPV and F8BT on the microsecond to millisecond time scale. The experimental results (and associated kinetic modeling) demonstrate that (i) triplet exciton pairs undergo efficient triplet-triplet annihilation on the <30 micros time scale, (ii) triplet-triplet annihilation is the dominant mechanism for triplet decay at incident excitation powers > or =50 W/cm(2), and (iii) singlet excitons are quenched by triplet excitons with an efficiency on the order of (1)/(2). The high efficiency of this latter process ensures that single molecule fluorescence spectroscopy can be effectively used to indirectly monitor triplet exciton population dynamics in conjugated polymers. Finally, correlation spectroscopy of MEH-PPV molecules in a multilayer device environment reveals that triplet excitons are efficiently quenched by hole polarons.