Fluoride Anion Complexation by a Triptycene‐Based Distiborane: Taking Advantage of a Weak but Observable C−H⋅⋅⋅F Interaction

Fluoride anion complexation impacts a number of areas ranging from sensing to nucleophilic fluorination chemistry. Described here is a new bidentate Lewis acid consisting of two stiborane units connected by a 1,8‐triptycenediyl backbone. This neutral derivative captures fluoride with an unprecedented affinity for a neutral, water‐compatible Lewis acid. Structural, spectroscopic and computational studies demonstrate that fluoride anion binding is assisted by the formation of a C−H⋅⋅⋅F hydrogen bond which involves a methine group of the 1,8‐triptycenediyl backbone.     

Squeezing Fluoride out of Water with a Neutral Bidentate Antimony(V) Lewis Acid

Because of hydration, fluoride ions in water typically elude complexation by neutral Lewis acids. Here, we show how this limitation can be overcome with a bidentate Lewis acid containing two antimony(V) centers. This derivative ( 2 ) is obtained by the simple reaction of 4,5‐bis(diphenylstibino)‐9,9‐dimethylxanthene ( 1 ) with two equivalents of 3,4,5,6‐tetrachlorobenzoquinone (o‐chloranil). It features two square‐pyramidal stiborane units oriented in a face‐to‐face fashion. Titration experiments show that this new bidentate Lewis acid binds fluoride in aqueous solutions containing 95 % water with a binding constant (K) of 700±30 M ^?1. The structure of the fluoride adduct confirms fluoride anion chelation between the two antimony centers.     

Fluoride anion binding by cyclic boronic esters: influence of backbone chelate on receptor integrity

A systematic investigation of fluoride anion binding properties as a function of chelate backbone has been carried out for ferrocene functionalised boronic esters of the types FcB(OR)2 and fc[B(OR)2]2 [Fc = ferrocenyl = (eta5-C5H5)Fe(eta5-C5H4); fc = ferrocendiyl = Fe(eta5-C5H4)2]. Cyclic boronic esters containing a saturated five- or six-membered chelate ring are readily synthesized from ferrocene, and selectively bind fluoride via Lewis acid/base chemistry in chloroform solution. The resulting complexes are characterized by relatively weak fluoride binding (e.g.K = 35.8 +/- 9.8 M(-1) for FcBO2C2H2Ph2-S,S), and by cathodic shifts in the ferrocene oxidation potential that form the basis for electrochemical or colorimetric fluoride detection. The fluoride selectivity of these systems is attributed to relatively weak Lewis acidity, resulting in weak F- binding, and essentially no binding of potentially competitive anions. By contrast, more elaborate Lewis acid frameworks based on calix[4]arene (calixH4), such as (FcB)2calix or fcB2calix, do not survive intact exposure to standard fluoride sources (e.g. [nBu4N]F.xH2O solutions in chloroform or acetonitrile). Instead B-O bond cleavage occurs yielding the parent calixarene; the differences between alkoxo- and aryloxo-functionalised derivatives can be rationalised, at least in part, by consideration of the differences in electron donating capabilities of RO- (R = alkyl, aryl).     

Electrophilic bis-fluorophosphonium dications: Lewis acid catalysts from diphosphines

Stepwise oxidation of 1,8-bis(diphenylphosphino)naphthalene and a series of (oligo)methylene-linked diphosphines with XeF₂ followed by fluoride abstraction yields a family of compounds featuring phosphine, phosphonium and phosphorane moieties in close proximity. The bisphosphonium ions [(C₁₀H₆)(Ph₂PF)₂]²⁺ (5) and [CH₂(Ph₂PF)₂]²⁺ (9a) exhibit remarkable Lewis acidity arising from the proximity of the phosphonium centers. The effectiveness of bisphosphonium dications (5, 9a–e) is examined in a series of Lewis acid catalysed transformations.     

Ambient-temperature metal-to-ligand charge-transfer phosphorescence facilitated by triarylboron: Bnpa and its metal complexes

A Cu(I) complex, 1, and a Pt(II) complex, 2a, of a triarylboron ligand, Bnpa, with bright ambient-temperature phosphorescence have been obtained. The phosphorescence of these complexes is highly sensitive toward molecular oxygen and has a distinct response to fluoride ions. For 1, the fluoride ion causes phosphorescent quenching and Bnpa dissociation, and for 2a, it switches phosphorescent color from yellow to green. The Cu(I) complex has an exceptionally high emission quantum yield (0.88) in the solid state.     

Multidentate Lewis acids: synthesis,structure and mode of action of a redox-based fluoride ion sensor

The mode of action of the bidentate bis(boronate) Lewis acid 2 as a fluoride ion sensor is shown to involve selective anion binding together with an electrochemical response.     

Exploiting the Strong Hydrogen Bond Donor Properties of a Borinic Acid Functionality for Fluoride Anion Recognition

Borinic acids have typically not been considered as hydrogen bond donor groups in molecular recognition. Described herein is a bifunctional borane/borinic acid derivative ( 2 ) in which the two functionalities are connected by a 1,8‐biphenylenediyl backbone. Anion binding studies reveal that 2 readily binds a fluoride anion by formation of a unique B?F???H?O?B hydrogen bond. This hydrogen bond is characterized by a short H‐F distance of 1.79(3) Å and a large coupling constant (¹J_HF) of 57.2 Hz. The magnitude of this interaction, which has also been investigated computationally, augments the fluoride anion binding properties of 2 , thus making it compatible with aqueous environments.     

Fluoride ion chelation by a bidentate phosphonium/borane Lewis acid

The phosphonium borane [1-Mes2B-2-MePh2P-(C6H4)]+ ([2]+) has been synthesized as an iodide salt by alkylation of 1-Mes2B-2-Ph2P-(C6H4) with MeI. This novel cationic borane complexes fluoride to afford the corresponding zwitterionic fluoroborate complex 1-FMes2B-2-MePh2P-(C6H4) (2-F) with a binding constant in MeOH exceeding that of 1-Mes2B-4-MePh2P-(C6H4) ([1]+) by at least 4 orders of magnitude. Structural and computational results indicate that the high fluorophilicity of [2]+ arises from both Coulombic and cooperative effects which lead to formation of a B-F-->P interaction with a F-->P distance of 2.666(2) A. These results, which are supported by NBO and AIM analyses, show that the latent phosphorus-centered Lewis acidity of the phosphonium moiety in [2]+ can be exploited to enhance fluoride binding via chelation.     

1,8-Naphthalimides in phosphorescent organic LEDs: the interplay between dopant,exciplex, and host emission

Four different 1,8-naphthalimide derivatives were examined in phosphorescent organic light emitting diodes (OLEDs), i.e., 1,8-naphthalimide, N-phenyl-1,8-naphthalimide, N-2,6-dibromophenyl-1,8-naphthalimide (niBr), and bis-N,N-1,8-naphthalimide. Photoluminescence from all four naphthalimides have violet-blue fluorescence and phosphorescent bands between 550 and 650 nm (visible at 77 K). While all four compounds gave good glassy films when doped with a phosphorescent dopant, only the niBr films remained glassy for extended periods. OLED studies focused on niBr, with two different architectures. One OLED structure (type 1) had the niBr layer as a doped luminescent layer and an undoped niBr layer to act as a hole-blocking layer. The alternate structure (type 2) utilizes a doped CBP layer as the luminescent layer and the niBr layer is used as a hole-blocking layer only (CBP = 4,4'-N,N'-dicarbazolylbiphenyl). Type 1 and 2 OLEDs were prepared with green, yellow, and red emissive phosphorescent dopants (Irppy, btIr, and btpIr, respectively). The dopants were organometallic Ir complexes, previously shown to give highly efficient OLEDs. Of the three dopants, the btpIr-based OLEDs showed the best device performance in both structures (peak efficiencies for type 2: 3.2% and 2.3 lum/W at 6.3 V; type 1: 1.7% and 1.3 lm/W at 6.1 V). The green and yellow dopants gave very similar performance in both type 1 and 2 devices (peak efficiencies are 0.2-0.3%), which were significantly poorer than the btpIr-based OLEDs. The emission spectrum of the btIr- and btpIr-based devices (type 1 and 2) are the same as the solution photoluminescence spectrum of the dopant alone, while the Irppy device gives a broad red emission line (lambda(max) = 640 nm). The red Irppy.niBr emission line is assigned to an Irppy.niBr exciplex. The type 2 Irppy-based device gave a voltage-dependent spectrum, with the red emission observed at low bias (4-8 V), switching over to strong green emission as the bias was raised. All other devices showed bias-independent spectra. Estimates of HOMO, LUMO, and excited-state energies (dopant, niBr, and exciplex) were used to explain the observed spectral properties of these devices. btpIr-based devices emit efficiently from isolated dopant states (external efficiencies = 3.2 %, 2.3 lum/W). Irppy-based devices emit only from exciplex states, with low efficiency (external efficiency = 0.3%). btIr.niBr films have very similar energies for the dopant, exciplex, and niBr triplet states, such that relaxation can go through any of these states, leading to low device efficiency (external efficiency = 0.4%). High device efficiency is achieved only when dopant emission is the dominant pathway for relaxation, since exciplex and niBr triplet states give either weak or no electroluminescence.     

A highly Lewis acidic triarylborane bearing peripheral o-carborane cages

A triarylborane (2) bearing three o-carborane cages at peripheral positions on the aryl groups was prepared and its crystal structure was determined from X-ray diffraction study. Treatment of 2 with KF in the presence of 18-crown-6 led to the potassium salt, [2F](-). A UV-vis titration experiment carried out in THF/H(2)O (9/1 v/v) showed that 2 binds fluoride ions with a binding constant (K) of 4.8 × 10(4) M(-1), which is an order-of-magnitude greater than K for the mono-carborane substituted triarylborane. The enhanced fluoride ion affinity of 2 indicates an apparent additive effect of multiple carborane substitutions on the Lewis acidity enhancement of the triarylborane. The highly Lewis acidic nature of 2 was further utilized in evaluating the fluoride ion affinity of tris(pentafluorophenyl)borane (B(C(6)F(5))(3)). A fluoride exchange reaction between [2F](-) and B(C(6)F(5))(3) resulted in 15 times higher fluorophilicity for B(C(6)F(5))(3) than for 2. The lower Lewis acidity of 2 compared with B(C(6)F(5))(3) was confirmed from its greater cathodic reduction potential.     

Hybrid Lewis acid/hydrogen-bond donor receptor for fluoride

[reaction: see text] To verify if hydrogen-bond donor groups can assist fluoride binding at the boron center of triaryl boranes, o-(dimesitylboryl)trifluoroacetanilide has been synthesized. Reaction of this new borane with [n-Bu(4)N][F] in acetone affords the corresponding fluoroborate complex whose stability constant exceeds that of [Mes(3)BF](-) by at least 2 orders of magnitude. Presumably, the higher fluoride affinity of o-(dimesitylboryl)trifluoroacetanilide results from the cooperativity of the Lewis acidic boron center and the hydrogen-bond donor trifluoroacetamide group.     

Detection of adsorption of Ru(II) and Os(II) polypyridyl complexes on gold and silver nanoparticles by single-photon counting emission measurements

The present study describes a new application of ruthenium(II) tris(bipyridine) (Ru(bpy)3(2+)) and osmium(II) tris(bipyridine) (Os(bpy)3(2+)) as phosphorescent labels for the quantification of surface binding of molecules to gold and silver nanoparticles. The fraction of Ru(bpy)3(2+) and Os(bpy)3(2+) that is in solution can be distinguished from the surface-bound fraction by the relative lifetimes and integrated emission yields as determined by time-correlated single-photon counting (TCSPC) spectroscopy. Complementary steady-state measurements were carried out to confirm surface attachment of the phosphorescent label molecules. Although the emission of solutions of Ru(bpy)3(2+) and Os(bpy)3(2+) is quenched proportional to the concentration of 10 nm Au or 20 nm Ag nanoparticles, the quenching is static and not diffusional quenching observed in Stern-Volmer plots. The results demonstrate that time-resolved spectroscopy provides a rapid method for the measurement of surface binding of labeled molecules on metallic nanoparticles. While steady-state measurements require the preparation of a series of samples with varying quencher concentrations and a reference, the method described herein requires a single sample plus reference. The mechanism for phosphorescence quenching on Au and Ag nanoparticles is discussed in terms of energy and electron transfer theories.     

Fluoride ion complexation by a B(2)/Hg heteronuclear tridentate Lewis acid

The reaction of [Li(THF)(4)][1,8-mu-(Mes(2)B)C(10)H(6)] with HgCl(2) affords [1,1'-(Hg)-[8-(Mes(2)B)C(10)H(6)](2)] () or [1-(ClHg)-8-(Mes(2)B)C(10)H(6)] (), depending on the stoichiometry of the reagents. These two new compounds have been characterized by (1)H, (13)C, (11)B and (199)Hg NMR, elemental analysis and X-ray crystallography. The cyclic voltammogram of in THF shows two distinct waves observed at E(1/2) -2.31 V and -2.61 V, corresponding to the sequential reductions of the two boron centers. Fluoride titration experiments monitored by electrochemistry suggest that binds tightly to one fluoride anion and more loosely to a second one. Theses conclusions have been confirmed by a UV-vis titration experiment which indicates that the first fluoride binding constant (K(1)) is greater than 10(8) M(-1) while the second (K(2)) equals 5.2 (+/- 0.4) x 10(3) M(-1). The fluoride binding properties of have been compared to those of [1-(Me(2)B)-8-(Mes(2)B)C(10)H(6)] () and [1-((2,6-Me(2)-4-Me(2)NC(6)H(2))Hg)-8-(Mes(2)B)C(10)H(6)] (). Both experimental and computational results indicate that its affinity for fluoride anions is comparable to that of but significantly lower than that of the diborane . In particular, the fluoride binding constants of , and in chloroform are respectively equal to 5.0 (+/- 0.2) x 10(5) M(-1), 1.0 (+/- 0.2) x 10(3) M(-1) and 1.7 (+/- 0.1) x 10(3) M(-1). Determination of the crystal structures of the fluoride adducts [S(NMe(2))(3)][-mu(2)-F] and [S(NMe(2))(3)][-mu(2)-F] along with computational results indicate that the higher fluoride binding constant of arises from a strong chelate effect involving two fluorophilic boron centers.     

Synthesis and properties of a cationic bidentate Lewis acid

As part of our efforts to increase the fluoride affinity of bidentate Lewis acids, we have set out to determine if the F(-) anion chelation occurring in such systems can be complemented by favorable Coulombic attractions. To explore this idea, the neutral B/Hg bidentate Lewis acid 1-{Mes(2)B}-8-{(2,6-Me(2)-4-Me(2)NC(6)H(2))Hg}C(10)H(6) (3) and its cationic analogue [1-{Mes(2)B}-8-{(2,6-Me2-4-Me(3)NC(6)H(2))Hg}C(10)H(6)]+ ([4]+) have been synthesized and studied. Compound 3 as well as the triflate salt of [4]+ react with [S(NMe(2))3][Me(3)SiF(2)] to afford the corresponding fluoride complexes [3-micro(2)-F]- and [4-micro(2)-F]. Spectroscopic and structural studies confirm that the F- anion bridges the two Lewis acidic centers in both [3-micro(2)-F]- and [4-micro(2)-F]. UV-vis titration experiments carried out in tetrahydrofuran/water (9/1, v/v) mixtures indicate that the fluoride binding constants of 3 and [4]+ are clearly differentiated and are equal to 1.3 (+/-0.1) x 10(2) M(-1) and 6.2 (+/-0.2) x 10(4) M(-1), respectively. The enhanced fluoride binding constant of [4]+, when compared to 3, confirms that the chelate effect occurring in these types of fluoride receptors can be combined with favorable Coulombic attractions to strengthen the host-guest interaction. Cation [4]+ remains highly selective for F- over other environmentally abundant anions including Cl-, Br-, NO(3)(-), H(2)PO(4)(-), and HSO(4)(-) and shows only a weak response to OAc(-). Finally, the addition of an aqueous solution of Al3+ to a solution containing [4-micro(2)-F] leads to complete regeneration of [4]+, showing that F(-) binding is reversible.     

Bifunctional Indenyl‐Derived Receptors for Fluoride Chelation and Detection

Anion receptors based on a [CpFe(indenyl)] scaffold offer the possibility for the incorporation of adjacent Lewis acidic functions onto a six‐membered carbocyclic framework, while at the same time retaining the colorimetric/electrochemical reporter mechanisms available to synthetically simpler ferrocene systems. Thus, [CpFe(indenyl)] systems featuring mutually ortho BMes₂ and PPh₂Me⁺ substituents (with either 4,5 or 5,6 regiochemistry) are accessible which are capable of cooperative fluoride ion fixation. Simultaneous binding at the borane and phosphonium centres can be established by spectroscopic, structural and computational approaches, and is responsible for the favourable thermodynamics associated with F^? uptake. Thus, in contrast to simple BMes₂ systems, the binding of fluoride is found to be more favourable than the uptake of cyanide (which interacts only with the borane Lewis acid). Moreover, in the case of a 4‐(MePh₂P)‐5‐(Mes₂B)‐7‐Me‐indenyl derivative, fluoride chelation is signalled not only by a large cathodic shift in the Fe^II/Fe^III potential (>500 mV in THF), but also by a distinct colour change from green (for the free receptor) to maroon for the adduct.     

A comparative study of surface acidity in the amorphous, high surface area solids, aluminium fluoride, magnesium fluoride and magnesium fluoride containing iron(III) or aluminium(III) fluorides

The behaviour of the sol–gel prepared, amorphous solids, high surface area (HS) aluminium fluoride and magnesium fluoride in promoting room temperature dehydrochlorination of tert-butyl chloride (Bu^tCl), in their catalytic activity for the dismutation of chlorodifluoromethane and in the temperature programmed desorption of ammonia is similar, indicating that, unexpectedly, both solids exhibit significant surface Lewis acidity. Using a similar approach, it has been demonstrated that surface Lewis acidity in HS-MgF₂ is enhanced by the incorporation of amorphous iron(III) fluoride and probably also by amorphous aluminium(III) fluoride. A second, unexpected feature is the substantial retention of anhydrous hydrogen chloride by all the solids, which is observed by the use of chlorine-36 labelling, when they are exposed at room temperature either to Bu^tCl or to HCl directly. The detailed behaviour of H³⁶Cl towards HS-AlF₃ depends on the fluorinating agent, dichlorodifluoromethane or anhydrous hydrogen fluoride, which is used in the second stage of HS-AlF₃ synthesis. This observation and the pattern of the results obtained overall lead to the proposal that strongly adsorbed HCl behaves as an unconventional Lewis base towards these solids.     

Time-resolved fluorescence reveals two binding sites of 1,8-ANS in intact human oxyhemoglobin

Time-resolved fluorescence of 1,8-anilinonaphthalene sulfonate (1,8-ANS) fluorescent probe bound to intact human oxyhemoglobin (HbO2) is investigated. Fluorescence emission spectra of 1,8-ANS in a potassium buffer solution (pH 7.4) of HbO2 undergo a substantial blue shift during first 6 ns after pulsed optical excitation at 337.1 nm. Nonexponential fluorescence kinetics of 1,8-ANS in the HbO2 solution are studied by the decay time distribution and conventional multiexponential analyses for a set of emission wavelength range of lambdaem = 455-600 nm. These fluorescence decays contain components with mean decay times of <0.5 ns, 3.1-5.5 ns, and 12.4-15.1 ns with spectrally-dependent relative contributions. The shortest decay component is assigned to free 1,8-ANS molecules in the bulk buffer environment, whereas the two longer decay components are assigned to two types of binding sites of 1,8-ANS in the HbO2 molecule presumably differing by polarity and accessibility to water molecules. The results represent the first experimental evidence of heterogeneous binding of 1,8-ANS to intact human oxyhemoglobin.     

Structural and electrochemical investigations of the high fluoride affinity of sterically hindered 1,8-bis(boryl)naphthalenes

The reaction of 10-bromo-9-oxa-10-boraanthracene with the tetrakis(tetrahydrofuran)lithium salt of dimesityl-1,8-naphthalenediylborate in diethyl ether affords 1-(dimesitylboryl)-8-(10'-bora-9'-oxaanthryl)naphthalene (2). This diborane reacts with [Me3SiF2][S(NMe2)3)] to afford the anionic complex [2-mu2-F]-, which has been isolated as a [S(NMe2)3]+ salt. The cyclic voltammograms of diborane 2 as well as 1-(dimesitylboryl)-8-(10'-bora-9'-thiaanthryl)naphthalene (1) exhibit two reversible reductions at E(1/2) = -2.200 and -2.566 V (vs FcH/FcH+) for 1 and E(1/2) = -2.248 and -2.620 V (vs FcH/FcH+) for 2 corresponding to the sequential reduction of the two boron centers. These two waves simultaneously disappear upon fluoride addition, thus indicating the formation of fluoride chelate complexes [1-mu2-F]- and [2-mu2-F]-. To identify the origin of the high fluoride affinity displayed by these diboranes, the structures of 2 and [2-mu2-F]- have been studied experimentally and computationally. The crystallographic studies show that the structure of 2 is distorted, thus indicating the presence of important steric repulsions between the neighboring boryl moieties. By contrast, the structure of the anionic complex [2-mu2-F]- is much more sterically relaxed than that of 2, as indicated by a reduction of the B-B distance from 3.279(4) A in 2 to 2.922(7) A in [2-mu2-F]-. The structural results suggest that the high fluoride affinity displayed by 2 results, at least in part, from the relief of steric repulsions induced by fluoride binding. Finally, the nature of the bonding as well as the strength of the interactions involved in the B-F-B bridge of [2-mu2-F]- has been studied using density functional theory calculations and Atoms-In-Molecules analyses. These calculations indicate that the enthalpic gain associated with the formation of two B-F bonds in [2-mu2-F]- only amounts to a fraction of the energy of a terminal B-F bond. These calculations also suggest that the relief of steric repulsions induced by fluoride binding in 2 may contribute to the high fluoride affinity of these types of molecules.     

Quinoxaline-bridged porphyrinoids

Quinoxaline-bridged porphyrinoids (3), the first macrocycles containing dipyrrolylquinoxaline (DPQ, 1) subunits, were synthesized from the condensation of the diformyl-substituted DPQ derivatives (2) and 1,8-diaminoanthracene. The resulting structures were confirmed by X-ray analyses, which showed encapsulation of CHCl(3) molecules within the columnar channels established by the stacked arrangement of the individual macrocycles. The solution phase interactions with fluoride and dihydrogenphosphate anions were studied in the case of the unsubstituted system 3a in CH(2)Cl(2). The binding affinities for these anions, studied at the tetrabutylammonium salts, were found to be enhanced relative to those of the simple, unsubstituted monomeric DPQ "parent" system (1a), presumably as the result of the combined effects of preorganization and cooperative binding permitted by the pyrrole NH donor groups. Positive homotropic allosteric anion binding was observed and is ascribed to the structurally coupled nature of the two binding cavities present in the macrocycles. Support for this latter contention came from energy minimization studies.     

(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.