Application of matrix solid-phase dispersion to the determination of a new generation of fungicides in fruits and vegetables

A method based on matrix solid-phase dispersion (MSPD) and gas chromatography to determine eight fungicides in fruits and vegetables is described. Fungicide residues were identified and quantified using nitrogen-phosphorus detection and electron-capture detection connected in parallel and confirmed by mass spectrometric detection. The method required 0.5 g of sample, C18 bonded silica as dispersant sorbent, silica as clean-up sorbent and ethyl acetate as eluting solvent. Recoveries from spiked orange, apple, tomato, artichoke, carrot and courgette samples ranged from 62 to 102% and relative standard deviations were less than 15% in the concentration range 0.05-10 mg kg(-1). Detection and quantitation limits ranged 3-30 microg kg(-1) and 10-100 microg kg(-1), respectively, with linear calibration curves up to 10 mg kg(-1). The analytical characteristics of MSPD compared very favourably with the results of a classical multiresidue method, which uses ethyl acetate and anhydrous sodium sulphate for the extraction.     

Determination of peanut allergens in cereal-chocolate-based snacks: metal-tag inductively coupled plasma mass spectrometry immunoassay versus liquid chromatography/electrospray ionization tandem mass spectrometry

A comparison of two methods for the identification and determination of peanut allergens based on europium (Eu)-tagged inductively coupled plasma mass spectrometry (ICP-MS) immunoassay and on liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) with a triple quadrupole mass analyzer was carried out on a complex food matrix like a chocolate rice crispy-based snack. The LC/MS/MS method was based on the determination of four different peptide biomarkers selective for the Ara h2 and Ara h3/4 peanut proteins. The performance of this method was compared with that of a non-competitive sandwich enzyme-linked immunosorbent assay (ELISA) method with ICP-MS detection of the metal used to tag the antibody for the quantitative peanut protein analysis in food. The limit of detection (LOD) and quantitation of the ICP-MS immunoassay were 2.2 and 5 microg peanuts g(-1) matrix, respectively, the recovery ranged from 86 +/- 18% to 110 +/- 4% and linearity was proved in the 5-50 microg g(-1) range. The LC/MS/MS method allowed us to obtain LODs of 1 and 5 microg protein g(-1) matrix for Ara h3/4 and Ara h2, respectively, thus obtaining significantly higher values with respect to the ELISA ICP-MS method, taking into account the different expression for concentrations. Linearity was established in the 10-200 microg g(-1) range of peanut proteins in the food matrix investigated and good precision (RSD <10%) was demonstrated. Both the two approaches, used for screening or confirmative purposes, showed the power of mass spectrometry when used as a very selective detector in difficult matrices even if some limitations still exist, i.e. matrix suppression in the LC/ESI-MS/MS procedure and the change of the Ag/Ab binding with matrix in the ICP-MS method.     

Development and validation of column high-performance liquid chromatographic and ultraviolet spectrophotometric methods for citalopram in tablets

Column high-performance liquid chromatographic (LC) and UV spectrophotometric methods for the quantitative determination of citalopram, a potent and selective serotonin reuptake inhibitor, in tablets were developed. The parameters linearity, precision, accuracy, specificity, robustness, limit of detection, and limit of quantitation were studied according to International Conference on Harmonization guidelines. Chromatography was carried out by the reversed-phase technique on an ACE C18 column with a mobile phase composed of 0.30% triethylamine solution-acetonitrile (55 + 45, v/v) adjusted to pH 6.6 with 10% ortho-phosphoric acid at a flow rate of 1.0 mL/min and 25 degrees C. The UV spectrophotometric method was performed at 239 nm. The linearity of the LC method was in the range of 10.00-70.00 microg/mL, and 2.50-17.50 microg/mL for the UV spectrophotometric method. The interday and intraday assay precision was < 1.5% (relative standard deviation) for the LC and UV spectrophotometric methods. The recoveries were in the range 100.70-101.35% for the LC method and 98.48-98.65% for the UV spectrophotometric method. Statistical analysis by Student's t-test showed no significant difference between the results obtained by the 2 methods. The proposed methods are highly sensitive, precise, and accurate and can be used for the reliable quantitation of citalopram in tablets.     

Identification of allantoin, uric acid, and indoxyl sulfate as biochemical indicators of filth in food packaging by LC.

A liquid chromatographic (LC) method was developed for the determination of allantoin, uric acid, and indoxyl sulfate in mammalian urine contaminated packaging material including paper bagging, corrugated cardboard, grayboard, and burlap bagging. The procedure involves solvent extraction and isolation of the 3 analytes by reversed-phase LC with ultraviolet detection at 225 nm for allantoin and 286 nm for uric acid and indoxyl sulfate. The composition of authentic mammalian urine such as mouse, rat, cat, dog, and human were also determined with regard to the 3 compounds of interest. A linear concentration range of 0.11-20.4, 0.02-10.0, and 0.04-30.0 microg/mL was obtained for allantoin, uric acid, and indoxyl sulfate, respectively. Limits of detection (LOD) and quantitation (LOQ) were 0.0104 and 0.0345 microg/mL for allantoin; 0.0018 and 0.0060 microg/mL for uric acid; and 0.0049 and 0.0165 microg/mL for indoxyl sulfate, respectively. Interday relative standard deviation values for a mixture of standard allantoin, uric acid, and indoxyl sulfate (n = 5) were 0.97, 0.80, and 0.94%, respectively. Analyte composition for 5 types of authentic mammalian urine varied from 0.19-6.88 mg/mL allantoin; 0.08-0.57 mg/mL uric acid; and 0.03-0.78 mg/mL indoxyl sulfate. Analyte content for 8 samples including 2 samples each for paper, cardboard, grayboard, and burlap bagging each contaminated with mouse or rat urine ranged from 相似文献   

Liquid chromatographic determination of honokiol and magnolol in hou po (Magnolia officinalis) as the raw herb and dried aqueous extract

A validated analytical method is described for the determination of honokiol and magnolol in Hou Po (Magnolia officinalis) as the dried raw herb and the commercially prepared dried aqueous extract. The samples were extracted with methanol by the Soxhlet method, and the extract was analyzed by liquid chromatography with photodiode array (LC/PDA) detection with confirmation of analyte identity by negative-ion electrospray ionization tandem mass spectrometry (ESI-MS/MS). A C18 column was used with a menthanol--0.1% aqueous acetic acid gradient mobile phase. Honokiol and magnolol were quantified at 288 nm. With the MS detector, the honokiol precursor ion at m/z 265 was shown to produce ions at m/z 222 and 224. For magnolol, the precursor ion at m/z 265 produced the ions at m/z 247 and 245. Comparable results were obtained for the LC/PDA and LC/ESI-MS/MS methods of quantitation. Six commercially prepared dried aqueous extracts were analyzed. The levels of honokiol and magnolol found in the raw herb were 17.0 and 21.3 mg/g, respectively. The limits of detection for honokiol and magnolol in the raw herb were 0.45 and 0.58 mg/g, respectively, and in the dried aqueous extract, 0.04 and 0.30 mg/g, respectively.     

Column and thin-layer chromatographic methods for the simultaneous determination of acediasulfone in the presence of cinchocaine, and cefuroxime in the presence of its hydrolytic degradation products

Column liquid chromatography (LC) and thin-layer chromatography (TLC)-densitometry methods are described for simultaneous determination of acediasulfone (Ace) and cinchocaine (Cinco). In the LC method, the separation and quantitation of the 2 drugs was achieved on a Zorbax C8 column (5 microm, 150 x 4.6 mm id) using a mobile phase composed of methanol-phosphate buffer, pH 2.5 (66 + 34, v/v), at a flow rate of 1 mL/min and ultraviolet detection at 300 and 327 nm for Ace and Cinco, respectively. The method showed linearity over concentration ranges of 20-200 and 45-685 microg/mL, respectively. In the TLC-densitometry method, a mobile phase composed of methanol-tetrahydrofuran-acetic acid (45 + 5 + 0.5, v/v/v) was used for the separation of the 2 drugs. The linearity range was 0.5-4 and 2-9 microg/spot, respectively. In addition, stability indicating TLC-densitometry method has been developed for determination of cefuroxime sodium in the presence of 5-70% of its known hydrolytic degradation products. The mobile phase butanol-methanol-tetrahydrofuran-concentrated ammonium hydroxide (50 + 50 + 50' + 5, v/v/v/v) was used. The concentration range was 2-10 microg/spot. The optimized methods proved to be specific and accurate for the analysis of the cited drugs in laboratory-prepared mixtures and dosage forms. The obtained results agreed statistically with those obtained by the reference methods.     

Single-laboratory validation of a modified liquid chromatographic method with UV detection for determination of trenbolone residues in bovine liver and muscle

Trenbolone acetate is a synthetic testosterone analog registered for use in a number of countries as a growth-promoting hormone, applied as an implant in the ears of feedlot cattle. The method is intended for the detection and quantitation of trace amounts of alpha- and beta-trenbolone in bovine tissues (muscle, liver) by liquid chromatography (LC) with UV detection and eliminates the use of the structural analog, 19-nortestosterone, as an internal standard. Trenbolone residues are extracted from tissues that have been homogenized in sodium acetate with a 3-phase liquid-liquid extraction by adding a mixture of water-acetonitrile-dichloromethanehexane, with trenbolone residues preferentially partitioned into the middle acetonitrile layer. The extract is passed through solid-phase extraction cartridges (both C18 and silica gel) using, respectively, methanol-water and acetone-toluene as eluents. Reversed-phase high-performance LC separation is performed, an octadecyl-bonded column with methanol-acetonitrile-water used as mobile phase for sample analysis. The limit of detection is 0.2 ng/g in muscle tissue and 0.6 ng/g in liver tissue, with coefficients of variation of 3.5-12.1% for alpha- and beta-trenbolone at concentrations from 0.2 to 4.0 ng/g fortified in muscle and 3.3-26.0% from liver fortified at 0.6-10.0 ng/g. Absolute recoveries of 40-130% were observed, but the use of fortified matrix curves eliminated recovery correction. Critical control points were identified in a pH adjustment step and an evaporation step during method validation, which included ruggedness testing. Analysis of incurred tissues (bovine liver and muscle) stored at -20 degrees C for over 25 weeks did not identify any significant loss of residues.     

Simultaneous determination of 16 sulfonamides in honey by liquid chromatography/tandem mass spectrometry

A method is described for the determination of 16 sulfonamides in honey. Samples are dissolved in phosphoric acid solution (pH2), cleaned up with 2 solid-phase extraction (SPE) cartridges, an aromatic sulfonic cation-exchange cartridge and an Oasis HLB SPE cartridge, and analyzed both qualitatively and quantitatively by liquid chromatography/tandem mass spectrometry (LC/MS/MS) under the selected conditions. Without exception, calibration curves were linear (r = > 0.995), when sulfamethizole was between 1.0 and 25.0 microg/kg; sulfacetamide, sulfapyridine, sulfadiazine, sulfachloropyridazine, sulfamethoxazole, sulfamerazine, sulfisoxazole, sulfamonomethoxine, and sulfadoxine were between 2.0 and 50.0 microg/kg; sulfamethoxypyridazine, sulfadimethoxine, and sulfathiazole were between 4.0 and 100.0 microg/kg; sulfamethazine and sulfameter were between 8.0 and 200.0 microg/kg; and sulfaphenazole was between 12.0 and 300.0 microg/kg. Average recoveries at 4 fortification levels in the range of 1.0-300 microg/kg in honey were 70.9-102.5%, and relative standard deviations were 2.02-11.52%. The limits of quantitation for the 16 sulfonamides were between 1.0 and 12.0 microg/kg, with the LC/MS/MS method.     

Determination of isoflavones in ready-to-feed soy-based infant formula

An alkaline hydrolysis/liquid chromatography (LC) method was developed for determination of isoflavones in ready-to-feed soy-based infant formula. The method consists of a 15 min methanol extraction, 10 min alkaline hydrolysis, HCl neutralization, gravity filtration, aqueous dilution, and 50 min LC analysis with UV detection at 262 and 250 nm to quantify 6 isoflavone analytes: daidzin, glycitin, genistin, daidzein, glycitein, and genistein. The concentration averages for 10 commercial batches (microg aglycone/g formula) were daidzein, 6.12 +/- 1.23; glycitein, 1.19 +/- 0.16; genistein, 12.8 +/- 2.35; and total, 20.1 +/- 3.61. Validation experiments demonstrated extraction completion and analyte stability to alkaline hydrolysis. Spike recoveries ranged from 97.6 to 104.1%, and a series of accuracy assessments showed that isoflavone concentration determined by the method was within 5% of the true value. The relative standard deviation values for repeatability ranged from 0.4 to 2.2% (n = 10), and from 0.3 to 2.7% (n = 4) for intermediate precision. Isoflavone peak purity was verified by comparing sample and standard peak area ratios (262/250 nm). The limits of detection and quantitation (microg/ formula) ranged from 0.02 to 0.05 and 0.08 to 0.18 microg/g, respectively. The difference between our concentrations and those reported by others in 1995-1998 is attributable to the well-established seasonal variation in soybean isoflavone levels. Although the method was applied exclusively to ready-to-feed formula in the present study, it is equally suitable for powder and concentrated liquid infant formulas.     

Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.     

Determination of low-level residual ethylene oxide by using solid-phase microextraction and gas chromatography

Current methods of analysis for ethylene oxide (EO) in medical devices include headspace and simulated-use extractions followed by gas chromatography with either a packed or a capillary column. The quantitation limits are about 0.5-1.0 microg/g for a packed column and about 0.1-0.2 microg/g for a capillary column. The current allowable levels of EO on medical devices sterilized with EO gas as outlined in International Organization for Standardization (ISO) 10993-7 may be significantly reduced from current levels by applying the ISO Draft International Standard 10993-17 method for establishing allowable limits. This may require EO test methods with detection and quantitation limits that are much lower than those of the currently available methods. This paper describes a new method that was developed for the determination of low-level EO by solid-phase microextraction using the direct-immersion method. Factors such as temperature and stirring were found to affect absorption efficiency and absorption time. A low extraction temperature (about 6 degrees C) was found to be more efficient than room-temperature extraction. Stirring was found to reduce absorption time by about 50%. Under these conditions, detection and quantitation limits of 0.002 and 0.009 microg/g, respectively, were obtained by using a capillary column. As a result, this method makes compliance with lower EO limits feasible.     

A simple determination of mizoribine in human plasma by liquid chromatography with UV detection

A simple liquid chromatography (LC) method was developed for determination of the therapeutic level of mizoribine in human plasma. After precipitation of plasma proteins with 6% perchloric acid, mizoribine was determined by LC with spectophotometric detection. The peak height for mizoribine was linearly related to its concentrations, which ranged from 0.09 to 3.13 microg/mL. Therefore, the limit of quantitation was considered to be 0.09 microg/mL. The accuracy was 104.96-107.37%. The intra- and interday relative standard deviation values were in the range of 1.10-3.25%. The detection limit was 0.025 microg/mL, defined as a signal-to-noise ratio of 3. The plasma concentrations of mizoribine were not related to the dosage. Because mizoribine was mainly excreted in the urine, the plasma concentrations of mizoribine might be affected by a change in renal function. Therefore, the mizoribine concentration in blood should be monitored and the dosage adjusted, depending on the condition of renal function. It was suggested that the present method may be applied well in the therapeutic drug monitoring for mizoribine.     

Determination of niacin in infant formula by solid-phase extraction and anion-exchange liquid chromatography.

A peer-verified, solid-phase extraction (SPE)/anion exchange liquid chromatographic method is presented for the determination of niacin in milk-based and soy-based infant formula. Analysis is in 3 steps: test sample digestion, extraction/cleanup, and liquid chromatography (LC). Digestion uses a standard AOAC digestion procedure that involves autoclaving at 121 degrees C for 45 min in (1 + 1) H2SO4 to free endogenous niacin from protein and to convert added niacinamide to niacin. The digest solution is adjusted to pH 6.5 with 7.5M NaOH. Acidification to pH <1.0 with (1 + 1) H2SO4 precipitates the protein. The clarified solution is then filtered, and the filtrate is brought to volume. SPE of niacin is accomplished by passing an aliquot of the digest solution through an aromatic sulfonic acid-SPE (ArSCX-SPE) column. After the column is washed with methanol and water to remove extraneous material, the niacin is eluted with 0.25M sodium acetate/acetic acid buffer at pH 5.6. An anion-exchange polystyrene-divinylbenzene column with 0.1 M sodium acetate/acetic acid buffer at pH 4.0 is used for LC. Niacin is determined by UV detection at 260 nm. A standard curve is prepared by passing known amounts of niacin through the ArSCX-SPE columns used for niacin extraction. The following values for x and relative standard deviation (RSD) were obtained for National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula with a certified value for niacin of 63.3 +/- 7.6 microg/g: Submitting laboratory.-- x = 59.7 +/- 4.0 microg/g; RSD = >6.7%; confidence interval (CI) = +/- 1.4 microg/g; n = 27. Peer laboratory.--x = 56.6 +/- 6.6 microg/g; RSD = >11.7%; CI =+/- 4.1 microg/g; n = 8.     

Determination of florfenicol amine in channel catfish muscle by liquid chromatography

A method for quantifying florfenicol amine (FFA) in channel catfish muscle was validated according to U.S. Food and Drug Administration guidelines. FFA is the proposed marker residue for the veterinary antibiotic florfenicol in catfish muscle for regulatory surveillance purposes. The method includes acid hydrolysis followed by sample cleanup with ethyl acetate extraction, basification, solid-phase extraction, and quantitation by liquid chromatography with UV detection. The assay was validated at 5 concentrations in the range of 0.075-35 microg/g muscle. The overall mean recovery of FFA from fish tissues fortified at these concentrations ranged from 85.7 to 92.3%, 4.8-17.2% relative standard deviation (RSD). The assay limit of detection was 0.044 microg/g muscle based on analysis of control muscle. Catfish muscle samples containing incurred florfenicol residues were analyzed in quintuplicate with RSD < 5%. Acid hydrolysis has previously been demonstrated to convert florfenicol and its known metabolites to FFA and to release a significant amount of FFA from nonextractable florfenicol residues in tissues containing incurred residues in other species. By using acid hydrolysis, this method should yield a more accurate estimate of the total florfenicol-related residue level in muscle tissue from florfenicol-treated catfish than could be achieved by solvent extraction alone.     

Development and validation of a liquid chromatography method for quantification of xanthorrhizol in roots of Iostephane heterophylla (Cav.) Benth ex Hemsl

Roots of Iostephane heterophylla (Cav.) Benth ex Hemsl are used mainly in Mexican traditional medicine to heal skin problems. The development of a column high-performance liquid chromatography (LC)-UV detector method for the determination of xanthorrhizol, the major and active component of the roots of I. heterophylla, is described in this paper. The content of this compound was quantitatively determined employing a Symmetry C18 5 microm particle size column with the isocratic mobile phase acetonitrile-water (85 + 15). The flow rate was 1.0 mL/min, and UV detection was at 230 nm. The limits of detection and quantitation were 0.2 and 0.5 microg/mL, respectively. Quantities of xanthorrhizol measured by this method ranged between 1.8 to 10.94 mg/g of root of the plant in 11 different samples of I. heterophylla. Xanthorrhizol was not detected in a sample of I. madrensis, so xanthorrhizol could be used as a marker compound of I. heterophylla. The LC method described here was shown to be reliable, reproducible, and accurate.     

Determination of oxytetracycline in salmon by liquid chromatography with metal-chelate fluorescence detection

A liquid chromatography (LC) method is described for the determination of oxytetracycline (OTC) in farmed Atlantic salmon muscle tissue. The method involves homogenization of salmon tissue, extraction of OTC into Mcllvaine-EDTA buffer, acid precipitation of proteins, cleanup through tandem solid-phase extraction cartridges (Strata-X and aminopropyl), elution with mobile phase containing slightly alkaline buffer and Mg2+, and LC separation with metal-chelate induced fluorescence detection. Salmon tissue was fortified with 0.10, 0.25, 0.50, 0.75, and 1.0 microg/g (ppm) oxytetracycline. Average absolute recoveries were 84, 76, 70, 76, and 85%, respectively, with relative standard deviation (RSD) values all less than 9%. The interassay average recovery was 78%, with a 4.2% RSD. Determination was based on a standard graph using peak areas with standard solutions equivalent to 0.0625, 0.125, 0.25, 0.50, and 1.0 ppm in tissue. A set of 5 matrix controls (unfortified salmon tissue) were also analyzed, in which no OTC was detected. The lowest standard was used as the limit of quantitation.     

Analytical method for the accurate determination of tricothecenes in grains using LC-MS/MS: a comparison between MRM transition and MS3 quantitation

The current food crisis demands unambiguous determination of mycotoxin contamination in staple foods to achieve safer food for consumption. This paper describes the first accurate LC-MS/MS method developed to analyze tricothecenes in grains by applying multiple reaction monitoring (MRM) transition and MS(3) quantitation strategies in tandem. The tricothecenes are nivalenol, deoxynivalenol, deoxynivalenol-3-glucoside, fusarenon X, 3-acetyl-deoxynivalenol, 15-acetyldeoxynivalenol, diacetoxyscirpenol, and HT-2 and T-2 toxins. Acetic acid and ammonium acetate were used to convert the analytes into their respective acetate adducts and ammonium adducts under negative and positive MS polarity conditions, respectively. The mycotoxins were separated by reversed-phase LC in a 13.5-min run, ionized using electrospray ionization, and detected by tandem mass spectrometry. Analyte-specific mass-to-charge (m/z) ratios were used to perform quantitation under MRM transition and MS(3) (linear ion trap) modes. Three experiments were made for each quantitation mode and matrix in batches over 6 days for recovery studies. The matrix effect was investigated at concentration levels of 20, 40, 80, 120, 160, and 200 μg kg(-1) (n = 3) in 5 g corn flour and rice flour. Extraction with acetonitrile provided a good overall recovery range of 90-108% (n = 3) at three levels of spiking concentration of 40, 80, and 120 μg kg(-1). A quantitation limit of 2-6 μg kg(-1) was achieved by applying an MRM transition quantitation strategy. Under MS(3) mode, a quantitation limit of 4-10 μg kg(-1) was achieved. Relative standard deviations of 2-10% and 2-11% were reported for MRM transition and MS(3) quantitation, respectively. The successful utilization of MS(3) enabled accurate analyte fragmentation pattern matching and its quantitation, leading to the development of analytical methods in fields that demand both analyte specificity and fragmentation fingerprint-matching capabilities that are unavailable under MRM transition.     

高效液相色谱-串联质谱联用测定蜂王浆中的三种硝基咪唑类残留

建立了高效液相色谱-串联质谱联用测定蜂王浆中甲硝唑(MTZ)、二甲硝唑(DMZ)和洛硝哒唑3(RNZ)种硝基咪唑类残 留的方法。使用氢氧化钠溶液溶解样品后,以乙酸乙酯液液萃取提取蜂王浆样品中的硝基咪唑类残留物。该法简便快捷, 适合大批量样品处理。采用氘代二甲硝唑作为内标和利用高选择性反应监测(H-RSM)技术,降低了基质干扰,增加了定量的 准确性。实验结果表明DMZ检测下限可以达到1.0 μg/kg,MTZ和RNZ检测下限可以达到0.5 μg/kg（S/N大于5）;DMZ 定量下限可以达到2.0 μg/kg,MTZ和RNZ定量下限可以达到1.0 μg/kg（S/N大于10）。线性范围为2.0～200 μg/L, 添加回收率为96.6%~110.6%(内标校正),相对标准偏差（RSD）为2.1%~7.4%。     

Analysis of yohimbine alkaloid from Pausinystalia yohimbe by non-aqueous capillary electrophoresis and gas chromatography-mass spectrometry

In the present work, the qualitative and quantitative analysis of Pausinystalia yohimbe-type alkaloids in the barks of Rubiaceae species is presented using different analytical approaches. Extracts of P. yohimbe were first examined by GC-MS and the major alkaloids were identified. The quantitation of yohimbine was then accomplished by non-aqueous CE (NACE) with diode array detection. This approach was selected in order to use a running buffer fully compatible with samples in organic solvent. In particular, a mixture of methanol containing ammonium acetate (20 mM) and glacial acetic acid was used as a BGE. The same analytical sample was subjected to GC-MS and NACE analysis; the different selectivity displayed by these techniques allowed different separation profiles that can be useful in phytochemical characterization of the extracts. The linear calibration ranges were all 10-1000 microg/mL for yohimbine by GC-MS and NACE analysis. The recovery of yohimbine was 91.2-94.0% with RSD 1.4-4.3%. The LOD for yohimbine were 0.6 microg/mL by GC-MS and 1.0 microg/mL by NACE, respectively. The GC-MS and NACE methods were successfully validated and applied to the quantitation of yohimbine.     

Development of HPLC methods for the determination of cyadox and its main metabolites in goat tissues.

Rapid and sensitive high-performance liquid-chromatographic methods were developed for the determination of cyadox, an antimicrobial growth-promoter, and its main metabolites (1,4-bisdesoxycyadox, quinoxaline-2-carboxylic acid) in goat muscle, liver, kidney and fat. Cyadox (CYX) and 1,4-bisdesoxycyadox (BDCYX) in fat were extracted with acetonitrile, and in other tissues with ethyl acetate. Quinoxaline-2-carboxylic acid (QCA) was isolated from tissue hydrolysates by solvent extraction, cleaned up with ion-exchange chromatography, followed by a final liquid-liquid extraction step. UV detections of CYX, BDCYX and QCA were performed at 305, 280 and 320 nm, respectively. The average recoveries of CYX, BDCYX and QCA in spiked tissues at levels of 25, 50, 100 microg/kg were 65 - 92%. The inter-day relative standard deviation for three compounds in different tissues was 5 - 16%. The quantitation limit was 25 microg/kg, and the detection limit was 15 microg/kg for three compounds in various tissues. Incurred goat tissues were analyzed to demonstrate the validity of the described methodologies. The present methods were highly selective and could be used in the metabolism and residue studies of cyadox.