Infrared spectra of B(OMe)3, ClB(OMe)2 and Cl2BOMe species,isolated CH stretching frequencies and bond strengths

Infrared spectra in the gas phase are reported over the range 3100-500 cm⁻¹ for species of B(OMe)₃, ClB(OMe)₂ and Cl₂BOMe, with CH₃, CD₃ and CHD₂ substitution. A detailed analysis of νCH and νCD data in all three species of Cl₂BOMe yields strong evidence for the presence of three kinds of CH bond, two of them weak and one of them strong. The methyl group is then twisted, probably through 10–20°, out of the eclipsed or staggered conformation. The CHD₂ spectra of the di and trimethoxy compounds are less susceptible to analysis, but suggest also the presence of two weak and strong bonds, the former increasing in weakness as the number of methoxy groups increases. This is as expected from the increased competition likely between the lone pair electrons for the empty boron orbital. The spectra of the CD₃ species permit a clear assignment of νBO, δ_sCH₃, δ_sCD₃ and δ_asCD₃ modes. In Cl(COCH₃)₂, ν_sBO lies at 1278 cm⁻¹.     

Polymer imprinting with iron-oxo-hydroxo clusters: [Fe6O2(OH)2(O2CC(Cl)=CH2)12(H2O)2], [Fe6O2(OH)2(O2C-Ph-(CH)=CH2)12(H2O)2] and [{Fe(O2CC(Cl)=CH2)(OMe)2}10

We report the syntheses of imprinted polymers using iron-oxo-hydroxo clusters as templates. Three new iron clusters, [Fe(6)O(2)(OH)(2)(O(2)CC(Cl)=CH(2))(12)(H(2)O)(2)] (1), [{Fe(O(2)CC(Cl)=CH(2))(OMe)(2)}(10)] (2) and [Fe(6)O(2)(OH)(2)(O(2)C-Ph-(CH)=CH(2))(12)(H(2)O)(2)] (3) have been prepared from commercially-available carboxylic acids. Cluster-imprinted-polymers (CIPs) of 1, 2 and 3 were prepared with ethylene glycol dimethacrylate monomer, and of 1 with methyl methacrylate monomer. The imprinted sites within the CIPs were examined using EXAFS and diffuse reflectance UV/vis spectroscopy, demonstrating that the clusters 1, 2 and 3 were incorporated intact within the polymers. Extraction of the clusters from the CIPs imprinted with 1 and 3 gave new polymers that showed evidence of an imprinting effect.     

Luminescent phosphine gold(I) thiolates: correlation between crystal structure and photoluminescent properties in [R3PAu{SC(OMe)=NC6H4NO2-4}] (R = Et, Cy, Ph) and [(Ph2P-R-PPh2){AuSC(OMe)=NC6H4NO2-4}2] (R = CH2, (CH2)2, (CH2)3, (CH2)4, Fc)

X-ray crystallography shows the gold atoms in [R3PAu{SC(OMe)=NC6H4NO2-4}] (R = Et, Cy, Ph; 1-3, respectively) and [(Ph2P-R-PPh2){AuSC(OMe)=NC6H4NO2-4}(2)] (R = CH2, (CH2)2, (CH2)3, (CH2)4, Fc; 4-8, respectively) are linearly coordinated by phosphorus and thiolate-sulfur; weak intramolecular Au...O interactions are featured in all structures. The smaller ethyl substituents in 1 allow for supramolecular association via Au...S and Au...Au interactions that are not found in 2 and 3, which contain larger phosphorus-bound Cy and Ph groups, respectively. Intramolecular Au...Au interactions are found in the dppm, dppe, dppp, and Fc structures but not in the dppp analogue, for which an anti conformation was found. The structures have been correlated with the results from photophysical study conducted in the solid state. Thus, photoexcitation of 1-7 with lambda > 350 in the solid state and in solution produces green and blue luminescence, respectively. The spectra in each medium are remarkably similar to each other, and so the emission energy and excitation maxima observed for 1-7 appear to be independent of the nature of the ancillary phosphines, as well as the presence or absence of Au...Au interactions, either intermolecularly or intramolecularly.     

Electronic structures and properties of the rhenium alkoxo derivatives Re2O3(OMe)6, Re4O6(OMe)12, and ReMoO2(OMe)7

The geometrical structures, charge distributions, dipole moments, frequencies of normal vibrations, NMR spectra, and total energies of the chemical bonds for the rhenium alkoxo derivatives Re₂O₃(OMe)₆, Re₄O₆(OMe)₁₂, and ReMoO₂(OMe)₇ were calculated by the DFT-B3LYP and Hartree-Fock ab initio methods based on the effective core potential theory (LANL2DZ approximation) and the semiempirical PM3(tm) method. Two optimized structures of Re₂O₃(OMe)₆ with close energies were found to substantially differ in geometry, ¹H, ¹³C, and 1¹⁷O NMR spectra, and dipole moment. Various characteristics of the electronic structures and the trans-effect of the ligands in the compounds under consideration were discussed.     

New superhindered polydentate polyphosphine ligands P(CH2CH2P(t)Bu2)3, PhP(CH2CH2P(t)Bu2)2, P(CH2CH2CH2P(t)Bu2)3, and their ruthenium(II) chloride complexes

The synthesis and characterization of the extremely hindered phosphine ligands, P(CH(2)CH(2)P(t)Bu(2))(3) (P(2)P(3)(tBu), 1), PhP(CH(2)CH(2)P(t)Bu(2))(2) (PhP(2)P(2)(tBu), 2), and P(CH(2)CH(2)CH(2)P(t)Bu(2))(3) (P(3)P(3)(tBu), 3) are reported, along with the synthesis and characterization of ruthenium chloro complexes RuCl(2)(P(2)P(3)(tBu)) (4), RuCl(2)(PhP(2)P(2)(tBu)) (5), and RuCl(2)(P(3)P(3)(tBu)) (6). The bulky P(2)P(3)(tBu) (1) and P(3)P(3)(tBu) (3) ligands are the most sterically encumbered PP(3)-type ligands so far synthesized, and in all cases, only three phosphorus donors are able to bind to the metal center. Complexes RuCl(2)(PhP(2)P(2)(tBu)) (5) and RuCl(2)(P(3)P(3)(tBu)) (6) were characterized by crystallography. Low temperature solution and solid state (31)P{(1)H} NMR were used to demonstrate that the structure of RuCl(2)(P(2)P(3)(tBu)) (4) is probably analogous to that of RuCl(2)(PhP(2)P(2)(tBu)) (5) which had been structurally characterized.     

Thermal decomposition of di-t-butyl peroxide in the presence of (CH3)2CCH2: Reactions of CH3, (CH3)2ĊCH2CH3, and (CH3)2ĊCH2C(CH3)2CH2CH3 radicals

A study of the reaction initiated by the thermal decomposition of di-t-butyl peroxide (DTBP) in the presence of (CH₃)₂C?CH₂ (B) at 391–444 K has yielded kinetic data on a number of reactions involving CH₃ (M·), (CH₃)₂CCH₂CH₃ (MB·) and (CH₃)₂?CH₂C(CH₃)₂CH₂CH₃ (MBB·) radicals. The cross-combination ratio for M· and MB· radicals, rate constants for the addition to B of M· and MB· radicals relative to those for their recombination reactions, and rate constants for the decomposition of DTBP, have been determined. The values are, respectively, where θ = RT ln 10 and the units are dm^3/2 mol^?1/2 s^?1/2 for k₂/k and k₉/k, s^?1 for k₀, and kJ mol^?1 for E. Various disproportionation-combination ratios involving M·, MB·, and MBB· radicals have been evaluated. The values obtained are: Δ₁(M·, MB·) = 0.79 ± 0.35, Δ₁(MB·, MB·) = 3.0 ± 1.0, Δ₁(MBB·, MB·) = 0.7 ± 0.4, Δ₁(M·, MBB·) = 4.1 ± 1.0, Δ₁(MB·, MBB·) = 6.2 ± 1.4, and Δ₁(MBB·, MBB·) = 3.9 ± 2.3, where Δ₁ refers to H-abstraction from the CH₃ group adjacent to the center of the second radical, yielding a 1-olefin. © 1994 John Wiley & Sons, Inc.     

Mass spectra of polymeric thioformaldehydes (CH2S)3, (CH2S)4, (CH2S)5 and (CH2S)x

The mass spectral fragmentations of various thioformaldehydes, 1,3,5-trithiacyclohexane, 1,3,5,7-tetrathiacyclooctane, 1,3,5,7,9-pentathiacyclodecane and a polymeric form (CH₂S)_x have been examined. The principal features of the spectra are reported. The fragmentation occurred by fracture of the ring in the cyclic compounds with or without rearrangement.     

Synthesis and Characterization of （CH3CH2CH2CH2NH3）2SnBr6

1 INTRODUCTION Recently, the researches on inorganic-organic hy-brid compounds represent an advanced field in mate-rial science[1]. At the molecular level, the combina-tion of two extremely different components providesan avenue to design new hybrid materials as well asthe ability to modulate properties of one or more ofthe components[2～6]. Some attractive properties, suchas efficient luminescence[2～4], ideal thermal and me-chanical stability, interesting magnetic[5], non-linearoptical[…     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

Reactions of Tungsten Propargyl and Allenyl Complexes with Hydrido Triosmium Cluster: Molecular and Crystal Structure of Cp(CO)2[P(OMe)3]W(μ, η1, η2-CH2CH=CH)OS3(CO)10H and H2(CH2CH = CH)2Os6(CO)20

Reactions of H₂Os₃(CO)₁₀, 3, with the monophosphite-substituted and non-substituted tungsten propargyl and allenyl carbonyl complexes Cp(CO)₂LWCH₂C≡CH (1a, L = CO; 1b, L = P(OMe)₃) and Cp(CO)₂LWCH = C = CH₂ (2a, L = CO; 2b, L = P(OMe)₃) were investigated. In the reaction of 1b with 3, a tetranuclear complex 4b is obtained. The molecules of 4b crystallize as Cp(CO)₂[P(OMe)₃]W(μ, η¹, η²-CH₂CH=CH)(μ-H)Os₃(CO)_l0 in space group PI with a = 9.490 (4), b = 13.072 (7), c = 13.770 (9) Å, α = 91.89 (5), β = 106.71 (5), γ = 104.07(4)°, V = 1577(2) ų, Z = 2. In the reaction of 2a with 3, from the reaction mixture exposed to air followed by workup using silica-gel packed column chromatography, a complex consisting of two triosmium clusters bridged by a hexadiene ligand from the coupling of allenyl ligand was obtained. The molecules of the hexanuclear complex crystallize as [CH₂CH = CH)₂(μH)₂OS₆(CO)₂₀in space group P2₁/c with a = 14.448 (7), b = 13.689 (4), c = 19.224 (4) Å, β = 107.14(3)°, V = 3633 (2) Å Z = 4.     

Self-assembly of the octanuclear cluster [Cu8(OH)10(NH2(CH2)2CH3)12]6+ and the one-dimensional N-propylcarbamate-linked coordination polymer {[Cu(O2CNH(CH2)2CH3)(NH2(CH2)2CH3)3](ClO4)}n

The reaction of Cu(ClO4)2.6-H2O and n-propylamine in methanol gives two high-nuclearity products of well-defined compositions. At amine concentrations greater than seven equivalents compared to copper ion concentration, the system fixes carbon dioxide from air to form the one-dimensional carbamate-bridged coordination polymer, {[Cu(mu2-O,O'-O2CNH(CH2)2CH3)(NH2(CH2)2CH3)3](ClO4)}n ({1-ClO4}n). Lower relative amine concentrations lead to the self-assembly of an octanuclear copper-amine-hydroxide cluster [Cu8(OH)10(NH2(CH2)2CH3)12]6+ (2). Both compounds exhibit unique structures: {1-ClO4}n is the first mu2-O,O'-mono-N-alkylcarbamate-linked coordination polymer and 2 is the largest copper-hydroxide-monodentate amine cluster identified to date. The crystal structures indicate that the size of the n-propyl group is probably crucial for directing the formation of these compounds. Magnetic susceptibility studies indicate very weak antiferromagnetic coupling for 1. The octanuclear cluster 2 displays slightly stronger net antiferromagnetic coupling, despite the presence of a number of Cu-O(H)-Cu angles below the value of about 97 degrees that would normally be expected to yield ferromagnetic coupling.     

Vanadium complexes of the N(CH2CH2S)3(3-) and O(CH2CH2S)2(2-) ligands with coligands relevant to nitrogen fixation processes

Vanadium(III) and vanadium(V) complexes derived from the tris(2-thiolatoethyl)amine ligand [(NS3)3-] and the bis(2-thiolatoethyl)ether ligand [(OS2)2-] have been synthesized with the aim of investigating the potential of these vanadium sites to bind dinitrogen and activate its reduction. Evidence is presented for the transient existence of (V(NS3)(N2)V(NS3), and a series of mononuclear complexes containing hydrazine, hydrazide, imide, ammine, organic cyanide, and isocyanide ligands has been prepared and the chemistry of these complexes investigated. [V(NS3)O] (1) reacts with an excess of N2H4 to give, probably via the intermediates (V(NS3)(NNH2) (2a) and (V(NS3)(N2)V(NS3) (3), the V(III) adduct [V(NS3)(N2H4)] (4). If 1 is treated with 0.5 mol of N2H4, 0.5 mol of N2 is evolved and green, insoluble [(V(NS3))n] (5) results. Compound 4 is converted by disproportionation to [V(NS3)(NH3)] (6), but 4 does not act as a catalyst for disproportionation of N2H4 nor does it act as a catalyst for its reduction by Zn/HOC6H3Pri2-2,6. Compound 1 reacts with NR1(2)NR2(2) (R1 = H or SiMe3; R2(2) = Me2, MePh, or HPh) to give the hydrazide complexes [V(NS3)(NNR2(2)] (R2(2) = Me2, 2b; R2(2) = MePh, 2c; R2(2) = HPh, 2d), which are not protonated by anhydrous HBr nor are they reduced by Zn/HOC6H3Pri2-2,6. Compound 2b can also be prepared by reaction of [V(NNMe2)(dipp)3] (dipp = OC6H3Pri2-2,6) with NS3H3. N2H4 is displaced quantitatively from 4 by anions to give the salts [NR3(4)][V(NS3)X] (X = Cl, R3 = Et, 7a; X = Cl, R3 = Ph, 7b; X = Br, R3 = Et, 7c; X = N3, R3 = Bu(n), 7d; X = N3, R3 = Et, 7e; X = CN, R3 = Et, 7f). Compound 6 loses NH3 thermally to give 5, which can also be prepared from [VCl3(THF)3] and NS3H3/LiBun. Displacement of NH3 from 6 by ligands L gives the adducts [V(NS3)(L)] (L = MeCN, nu CN 2264 cm-1, 8a; L = ButNC, nu NC 2173 cm-1, 8b; L = C6H11NC, nu NC 2173 cm-1, 8c). Reaction of 4 with N3SiMe3 gives [V(NS3)(NSiMe3)] (9), which is converted to [V(NS3)(NH)] (10) by hydrolysis and to [V(NS3)(NCPh3)] (11) by reaction with ClCPh3. Compound 10 is converted into 1 by [NMe4]OH and to [V(NS3)NLi(THF)2] (12) by LiNPri in THF. A further range of imido complexes [V(NS3)(NR4)] (R4 = C6H4Y-4 where Y = H (13a), OMe (13b), Me (13c), Cl (13d), Br (13e), NO2 (13f); R4 = C6H4Y-3, where Y = OMe (13g); Cl (13h); R4 = C6H3Y2-3,4, where Y = Me (13i); Cl (13j); R4 = C6H11 (13k)) has been prepared by reaction of 1 with R4NCO. The precursor complex [V(OS2)O(dipp)] (14) [OS2(2-) = O(CH2CH2S)2(2-)] has been prepared from [VO(OPri)3], Hdipp, and OS2H2. It reacts with NH2NMe2 to give [V(OS2)(NNMe2)(dipp)] (15) and with N3SiMe3 to give [V(OS2)(NSiMe3)(dipp)] (16). A second oxide precursor, formulated as [V(OS2)1.5O] (17), has also been obtained, and it reacts with SiMe3NHNMe2 to give [V(OS2)(NNMe2)(OSiMe3)] (18). The X-ray crystal structures of the complexes 2b, 2c, 4, 6, 7a, 8a, 9, 10, 13d, 14, 15, 16, and 18 have been determined, and the 51V NMR and other spectroscopic parameters of the complexes are discussed in terms of electronic effects.     

Bis(pyrazolylethyl)thioether ligation to zinc and cadmium: structural characterization of [S(CH2CH2pzMe2)2]ZnCl2, [S(CH2CH2pzMe2)2]CdI2 and [S(CH2CH2pzMe2)2]Cd(NO3)2

Structural characterization of [S(CH₂CH₂pz^Me₂)₂]ZnCl₂ by X-ray diffraction demonstrates that the potentially tridentate [NNS] donor ligand S(CH₂CH₂pz^Me₂)₂ does not coordinate via sulfur, but only binds through the pyrazolyl groups. Furthermore, the ligand does not chelate, but preferentially bridges two zinc centers, thereby resulting in a polymeric, helical, structure. In contrast to the zinc system, the thioether functionality does bind to cadmium in related derivatives, [S(CH₂CH₂pz^Me₂)₂]CdI₂ and [S(CH₂CH₂pz^Me₂)₂]Cd(NO₃)₂.     

Preparation and reactivity of CpRu(OMe)PCy3 and CpRuHL2 (L = PCyPh2, PCy2H) from [CpRu(OMe)]2 and bulky phosphines

The reaction of [CpRu(OMe)]₂ (1) with PCy₃ yields the 16-electron alkoxo derivative, CpRu(OMe)(PCy₃) (2). 2 reacts with H₂ and HBF₄ to give the known CpRuH₃PCy₃ (3) and [CpRu(C₆H₉PCy₂)]BF₄ (4). The reaction of 1 with one or two equivalents of L yields CpRuHL₂ (L = PCyPh₂ (5), PCy₂H (6)) through a β-elimination process. Upon protonation, 5 and 6 are converted into [CpRuH₂L₂]BF₄ (L = PCyPh₂ (7), PCy₂H (8)).