紫外光固化聚多氟烷氧丙基甲基硅氧烷的研究

本文报道几种紫外光敏有机硅单体:(γ-甲基丙烯酰氧)丙基甲基二甲氧基硅烷,1,3,5,7-四(γ-甲基丙烯酰氧丙基)四甲基环四硅氧烷和1,3-双(甲基丙烯酰氧甲基)-1,1,3,3-四甲基二硅氧烷的合成,以及它们与αH,αH,ωH-全氟烷氧丙基甲基环四硅氧烷的开环共聚反应,制备了一系列新型光敏聚多氟烷氧丙基甲基硅氧烷.并初步研究了在紫外光辐照下,这类光敏聚多氟烷氧丙基甲基硅氧烷的化学结构对固化速度的影响.     

硼酸亲和杂化毛细管整体柱选择性富集蒲公英中的活性物质

以四乙氧基硅烷,N-氨乙基-3-氨丙基三乙氧基硅烷,3-甲基丙烯酰氧丙基三甲氧基硅烷作为前驱,4-乙烯基苯硼酸为单体,在毛细管中原位制备硼酸亲和杂化整体柱,该柱可在中性条件下选择性的富集顺式二羟基生物分子,实现了对蒲公英中活性成分咖啡酸及绿原酸的选择性富集。     

功能性硅烷在纳米氧化硅表面的自组装

在分散体系中,两种功能性硅烷,甲基丙烯酰氧丙基三甲基硅烷(MPTES)和氨丙基三甲基硅烷(APTES)在纳米氧化硅表面形成自组装单分子层,用XPS 和FTIR对所得自组装单分子层进行了表征.元素分析结果表明,所得功能性纳米氧化硅中的功能基含量分别为1.03 mmol/g甲基丙烯酰氧基/丙烯酰氧丙基纳米氧化硅(MPSN)和3.34 mmol/g氨基/氨丙基纳米氧化硅(APSN).LSS 分析结果表明,未修饰纳米氧化硅、 MPSN和APSN在甲苯分散体系中的平均流体力学直径大约分别为240、 45和560 nm.     

细乳液聚合制备载有CdTe的交联聚苯乙烯荧光微球

利用改进的正相细乳液聚合法, 对疏水的CdTe纳米晶进行包覆, 得到了纳米级的交联聚苯乙烯荧光微球. 研究发现, 较高的引发剂浓度和较高的交联度有利于抑制相分离的发生和荧光的保持. 进而将3-甲基丙烯酰氧基丙基三甲氧基硅烷作为共聚单体, 得到了表面硅羟基功能化的聚苯乙烯荧光微球, 改善了微球在水相中的分散性, 并将此类荧光功能微球成功用于细胞成像.     

纳米SiO_2表面基团在MMA原位本体聚合中的阻缓聚作用

分别以3-(甲基丙烯酰氧)丙基三甲氧基硅烷(MPS)和辛基三甲氧基硅烷(OTMS)为活性和惰性硅烷的代表,对SiO2进行不同锚固密度的表面修饰,并以改性SiO2的甲基丙烯酸甲酯(MMA)单体分散液为原料,通过原位本体聚合制得一系列SiO2含量不同的高分散性SiO2/PMMA复合材料.考察SiO2表面基团活性程度和SiO2含量对聚合反应动力学、基体聚合物分子量以及复合材料硬度的影响,探究修饰状态不同SiO2在本体自由基聚合中的作用机制.发现SiO2表面硅羟基及其锚固MPS的活性双键会对聚合反应起阻缓聚作用,进而会显著降低基体聚合物的分子量及复合材料的硬度.而惰性硅烷OTMS对SiO2表面的锚固则会消耗SiO2表面硅羟基、并屏蔽其影响,因而随着OTMS锚固密度的提高,基体分子量和复合材料硬度均会随之提高,特别是当表面修饰达到饱和状态时,SiO2的阻缓聚作用已可忽略.     

聚甲基丙烯酸丁酯/(SiO2-TiO2)杂化材料的研究

以γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂，用溶胶一凝胶法制备了聚甲基丙烯酸丁酯／(SiO2-TiO2)杂化材料，进行了结构表征和性能研究。经电镜观察，杂化体系固化膜两相间结合紧密，无机相是一种粒径介于10～20nm之间的球形颗粒。实验结果表明：杂化体系固化膜均匀性好和热氧化稳定性得到很大提高。由于无机相与有机相通过共价键相连，聚甲基丙烯酸丁酯／(SiO2-TiO2)杂化材料在无机物含量较高时，仍能保持良好的柔韧性。     

一种新型亲水性有机-无机渗透蒸发分离膜——聚丙烯酰胺复合膜的制备

将纳米二氧化硅微孔膜用γ-(甲基丙烯酰氧基)丙基三甲氧基硅烷处理,再通过自由基聚合接枝丙烯酰胺单体制备出一种新型的亲水性有机-无机复合膜.用TGA测定了单体在二氧化硅粉末上的接枝率;用SEM和AFM观察了接枝反应前后膜表面形态的变化;系统研究了接枝单体浓度对膜的渗透蒸发分离性能的影响.结果表明,这种膜用于醇水和丙烯酸水溶液的分离有很好的选择性和渗透性;在丙烯酰胺质量分数为3%的溶液中接枝的膜有较好的分离性;溶液浓度和操作温度对膜渗透性的影响非常特殊.     

PMMA纳米球的制备及其银膜包覆技术

采用无皂乳液聚合法制备了单分散、直径为170 nm左右的聚甲基丙烯酸甲酯(PMMA)纳米球, 然后利用3-甲基丙烯酰氧基丙基三甲氧基硅烷(MATS)和3-巯丙基三甲氧基硅烷(MPTMS)对PMMA纳米球进行表面改性, 在其表面包覆一层均匀的巯基, 通过巯基与银离子之间的相互作用, 使银在PMMA纳米球表面成核长大, 从而合成PMMA/Ag纳米球壳粒子. 通过扫描电子显微镜、投射电子显微镜和紫外-可见吸收光谱测试技术对产物性能进行了表征, 研究结果表明, 制备的PMMA/Ag纳米球壳粒子的分散性好、包覆均匀.     

Janus纳米材料的制备及结构调控

用3-(甲基丙烯酰氧)丙基三甲氧基硅烷(MPS)、 氨丙基三乙氧硅烷(APTES)和正硅酸乙酯(TEOS)溶胀聚苯乙烯中空微球的壳层, 在壳层表面通过溶胶-凝胶过程, 使亲油和亲水基团通过自组装作用分别朝向聚苯乙烯基体和水相, 形成Janus结构. 用良溶剂N,N-二甲基甲酰胺(DMF)溶解除去聚苯乙烯, 得到二氧化硅基复合Janus纳米材料. 改变反应体系pH值和单体用量等可以调控Janus纳米材料微结构, 得到Janus中空球和纳米片.     

苯乙烯在烷基功能化硅单晶表面的原位活性自由基聚合反应

介绍了一种在单晶硅表面制备聚苯乙烯刷子的新方法, 此方法分3步进行: (ⅰ) 将3-甲基丙烯酰氧基丙基三甲氧基硅烷接枝到单晶硅表面, (ⅱ) 以偶氮二异丁腈(AIBN)为催化剂, 将2,2,6,6-四甲基哌啶-N-氧基-1-羟基(HTEMPO·)引入3-甲基丙烯酰氧基丙基三甲氧基硅烷的末端, (ⅲ) 在HTEMPO·存在下, 苯乙烯进行活性自由基聚合反应. 可控活性自由基聚合反应可以精确控制分子量及其分布. 光电子能谱(XPS)的测试结果表明, 带有引发剂的烷氧基链已接枝到单晶硅表面. XPS和橢偏仪的测试结果表明, 聚苯乙烯以化学键的方式被锚接到了单晶硅上. 接枝聚合物层的厚度可由反应时间来精确控制. 用此方法可以在基体表面合成无规共聚物或嵌段共聚物.     

Homogeneous ion-exchange membranes of improved flexibility

Poly(styrenesulfonic acid) ion-exchange membranes having various degrees of porosity and flexibility have been prepared by using aliphatic and aromatic esters of p-styrenesulfonic acid. The membranes formed from the aliphatic ester monomers were found to exhibit an increase in water uptake, permeability, and flexibility with increase in the size of the alcohol group of the ester monomer. With membranes formed from the phenyl and β-naphthyl ester monomers the reverse trend was indicated. The flexibility of the membranes formed from the aromatic ester monomers was much greater than that obtained with the aliphatic esters.     

ATRP法合成聚去氢枞酸丙烯酸乙二醇酯的研究

本研究从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,2-溴-异丁酸乙酯(EBr-iB)为引发剂,CuBr/2,2'-联吡啶(2,2'-bipyridine)为催化体系,在90 oC下,利用原子转移聚合(ATRP)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE).利用FT-IR、1H-NMR和GPC对所制备的单体和聚合物进行了表征,同时考察了单体转化率随聚合反应时间的变化.结果表明,聚合反应动力学曲线呈良好线性关系,表观聚合速率常数kp′为3.6 ×10-7 s-1;所得聚合物的分子量分布很窄.     

Narrow molecular weight distribution poly(styrenesulfonic acid). Part I. Preparation,solution properties,and phase separation

A method is described for the conversion of polystyrene to poly(styrenesulfonic acid) without change in the molecular weight distribution; the reaction is performed at room temperature in 100% H₂SO₄ and uses Ag⁺ catalyst. The resulting polyelectrolyte has solubility and other characteristics significantly different from those of previously investigated poly(vinylsulfonic acid). This permits a study of the influence of the aromatic group on the local and long range interactions in solution. The barium salt of poly(styrenesulfonic acid) is unusual in showing both upper and lower consolute temperatures in solution.     

阻燃聚丙烯酸酯胶的合成

通过溶液聚合法制得了阻燃性丙烯酸酯胶。研究了甲基丙烯酸2,4,6-三溴苯酯及引发剂用量,交联单体及反应温度、反应时间等对剥离强度的影响。研究了多元共聚丙烯酸酯胶的单体组成、合成工艺及其产品性能。结果表明,制得的胶粘剂在室温下剥离强度为19．5N／cm。     

两种双亲性聚合物自组装胶束复合水溶液的乳化性能

以苯乙烯(St)、含香豆素光敏单体(VM)、丙烯酸(AA)为单体,偶氮二异丁腈(AIBN)为引发剂引发自由基共聚,合成了双亲性光敏无规共聚物P(St-co-VM-co-AA)(简称PSVA);又以St及甲基丙烯酸二甲胺乙酯(DMAEMA)为单体,AIBN为引发剂引发自由基共聚,制得二元双亲性无规共聚物P(St-co-D...     

光散射法研究丙烯酸十八酯和苯乙烯微乳液 共聚机理

在十六烷基溴化吡啶/叔丁醇/15%丙烯酸十八酯和苯乙烯/水体系的O/W微乳液中,使用动态光散射法,研究其中两种单体共聚反应的成核机理。结果表明,聚合过程中乳胶粒成核位置主要在增溶胶囊的单体微珠中,乳胶粒主要依靠单体微珠不断提供单体而长大。     

Stimuli-responsive polyelectrolyte polymer brushes prepared via atom-transfer radical polymerization

We present an account of our research into polyelectrolyte polymer brushes that are capable of acting as stimuli-responsive films. We first detail the synthesis of poly(acrylic acid) polymer brushes using ATRP in a "grafting from" strategy. Significantly, we employed a chemical-free deprotection step that should leave the anchoring ester groups intact. We have demonstrated how these polymer assemblies respond to stimuli such as pH and electrolyte concentration. We have used poly(acrylic acid) polymer brushes for the synthesis of metallic nanoparticles and review this work. We have used XPS, ATR-FTIR, and AFM spectroscopy to show the presence of silver and palladium nanoparticles within polymer brushes. Finally, we report the synthesis of AB diblock polyampholyte polymer brushes that represent an extension of polyelectrolyte polymer brushes.     

Pervaporation and properties of chitosan-poly(acrylic acid) complex membranes

Polyelectrolyte complex membranes between chitosan as a cationic polyelectrolyte and poly(acrylic acid) as an anionic species were prepared by blending two polymer solutions in different ratio. Characterization of chitosan-poly(acrylic acid) complex membrane was investigated by Fourier transform-infrared (FT-IR), wide angle X-ray diffractometer, dielectric analyzer. Their mechanical properties were studied by universal testing machine. The swelling of polyelectrolyte membranes was studied. Thermal properties of polyelectrolyte membranes from chitosan and poly(acrylic acid) by varying blend ratios showed a shift in transition temperatures of polyelectrolyte complexes. Polyelectrolyte complex membranes from chitosan and poly(acrylic acid) had pH sensitive characteristics as determined by FT-IR studies and swelling behaviors. Pervaporation performances were investigated with various organic mixtures; water-ethanol, water-isopropanol, methanol-methyl t-butyl ether mixtures. An increase of poly(acrylic acid) content in the polyelectrolyte complex membranes affected the swelling behavior and pervaporation performance of water-ethanol mixture. Permeation flux decreased and the water concentration in the permeate was close to 100% upon increasing the feed alcohol concentration.     

Kinetics of polyelectrolyte network formation in free-radical copolymerization of acrylic acid and bisacrylamide

Recently, a research/development program has been initiated to investigate the kinetics of synthesis, characterization and applications of polyelectrolyte networks. The research on crosslinking involves both theoretical development and experimentation. Herein, is provided a summary of this work. In the experimental polymerization done to date, acrylic acid (AA)/N.N'-methylenebisacrylamide (BAM) was studied in considerable detail. The polymerization conditions were: temperature, 50°C; initial monomer concentration, 5 wt%, of which 1.0 mol% is BAM; K₂S₂O₈(KPS) as the initiator, 10⁻³ mol/L; pH range, 1 − 13; sodium chloride concentrations up to 3.1 mol/L. Measurements included: monomer conversion, polymer composition, sol/gel fraction, swelling ratio, and the densities of primary cyclization, secondary cyclization and crosslinking. It was found that the effect of polymerization parameters on the resulting polymer network microstructure was dramatic, and in particular, the pH and ionic strength of the reaction medium were important parameters. In the theoretical studies, the Tobita-Hamielec kinetic gelation model was extended to incorporate the concept of ion pair interaction and the divinyl loop formation. The system was treated as a multi-component polymerization of acrylic acid, acrylate ion, acrylate ion pair and bisacrylamide. The model permits one to investigate the development of the crosslinking density distribution among primary polymer chains during the course of polymerization as a function of pH and ionic strength.     

Polyelectrolyte layer-by-layer self-assembly enhanced by electric field and their multilayer membranes for separating isopropanol–water mixtures

An electric field enhanced method is developed for fabricating layer-by-layer (LbL) self-assembly polyelectrolyte multilayer membranes. Three kinds of electric field enhanced polyelectrolyte multilayer membranes (EPEMs), poly(diallyl dimethylammonium chloride)/poly(styrenesulfonate sodium salt) (PDDA/PSS), poly(diallyldimethylammonium chloride)/poly(acrylic acid sodium salt) (PDDA/PAA) and polyethylenimine/poly(acrylic acid sodium salt) (PEI/PAA), were self-assembled on a reverse osmosis membrane (ROM). The pervaporation performances of EPEMs for separating isopropanol–water mixtures (90/10, w/w) are all superior to those of corresponding normal self-assembled polyelectrolytes membranes (PEMs), and the selectivity increases with PDDA/PSS, PDDA/PAA and PEI/PAA in order. For (PEI/PAA)₄PEI EPEM, the separation factor is 1075 and permeation flux is 4.05 kg m⁻² h⁻¹ at 70 °C. This novel method speeds up the LbL process, which makes it promising for the practical application of the LbL multilayer membrane.