An active phase transformation on surface of Ni-Au/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst during partial oxidation of methane to synthesis gas

It was studied the influence of gold addition on physico-chemical properties and catalytic activity of bimetallic Ni-Au/Al₂O₃ catalyst in partial oxidation of methane (POM). The reduction behavior in hydrogen, XRD crystal structure, XPS spectra and POM catalytic activity were investigated. The reduction of Ni-Au catalyst is a prerequisite condition to catalyze POM reaction. The formation of Ni-Au alloy during high temperature reduction in hydrogen and also in the conditions of POM reaction was experimentally proved. The addition of gold to Ni/Al₂O₃ system improves catalyst stability and activity in POM reaction.     

The influence of addition of silver and copper on the reducibility of CrAl<Subscript>3</Subscript>O<Subscript>6</Subscript> system

The influence of addition of silver and copper on the reduction behavior of binary oxide CrAl₃O₆ was investigated. The formation of copper chromite CuCr₂O₄ and silver chromate Ag₂CrO₄ during calcinations process was observed. The intermediate phase CrO was detected when copper and silver-copper systems were reduced at temperatures above 500°C. This intermediate is formed from Cr₂O₃, which is yielded by the initial reduction of Cr₂O₄²⁻ species.     

The effect of spinel type support FeAlO<Subscript>3</Subscript>, ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>, CrAl<Subscript>3</Subscript>O<Subscript>6</Subscript> on physicochemical properties of Cu,Ag, Au,Ru supported catalysts for methanol synthesis

The comparative study of the role of binary oxide support on catalyst physico-chemical properties and performance in methanol synthesis were undertaken and the spinel like type structures (ZnAl₂O₄, FeAlO₃, CrAl₃O₆) were prepared and used as the supports for 5% metal (Cu, Ag, Au, Ru) dispersed catalysts. The monometallic 5% Cu/support and bimetallic 1% Au (or 1% Ru)-5% Cu/support (Al₂O₃, ZnAl₂O₄, FeAlO₃, CrAl₃O₆) catalysts were investigated by BET, XRD and TPR methods. Activity tests in methanol synthesis of CO and CO₂ mixture hydrogenation were carried out. The order of Cu/support catalysts activity in methanol synthesis: CrAl₃O{ia6} > FeAlO₃ > ZnAl₂O₄ is conditioned by their reducibility in hydrogen at low temperature. Gold appeared more efficient than ruthenium in promotion of Cu/support catalysts. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 2, pp. 242–248. The article is published in the original.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

The use of thermal analysis in the study of Ca<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript> formation by the polymeric precursor method

Single-phase Ca₃Al₂O₆ was prepared via polymeric precursor method. The influence of the reactants nature in the Ca₃Al₂O₆ synthesis was investigated. For this purpose, citric acid and soluble salts of calcium (nitrate, chloride, carbonate) and aluminium (nitrate, chloride, acetate) were used as starting materials, in the presence and, respectively, in the absence of ethylene glycol. Ca₃Al₂O₆ resulted as single-phase after annealing at 1050 °C for 1 h only starting from calcium nitrate or carbonate and aluminium nitrate or acetate as salts precursor for Ca²⁺ and Al³⁺ cations. The formation of Ca₃Al₂O₆ is not conditioned by the ethylene glycol presence in these mixtures. Using calcium and aluminium chlorides, the phases present at 1050 °C are Ca₁₂Al₁₄O₃₃ and unreacted CaO.     

Structure and surface properties of ZrO<Subscript>2</Subscript>, CeO<Subscript>2</Subscript>, and Zr<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> prepared by a microemulsion method according to X-ray diffraction,TPR, and EPR data

It was established by X-ray diffraction, TPR, and EPR that microemulsion (m.e.) synthesis yields the binary oxides ZrO₂(m.e.) and CeO₂(m.e.) and the mixed oxide Zr_0.5Ce_0.5O₂(m.e.) in the form of a tetragonal, cubic, and pseudocubic phase, respectively, having crystallite sizes of 5–6 nm. The bond energy of surface oxygen in the (m.e.) samples is lower than in their analogues prepared by pyrolysis. Hydrogen oxidation on the oxides under study occurs at higher temperatures than CO oxidation. ZrO₂(m.e.) and CeO₂(m.e.) are active in O₂⁻ formation during NO + O₂ adsorption, while CeO₂ is active during CO + O₂ adsorption, too. However, its amount here is one-half to one-third its amount in the pyrolysis-prepared samples, signifying a reduced number of active sites, which are Zr⁴⁺ and Ce⁴⁺ coordinatively unsaturated cations and Me⁴⁺-O²⁻ pairs. O₂⁻ radical anions are stabilized in the coordination sphere of Zr⁴⁺ coordinatively unsaturated cations via ionic bonding, and in the sphere of Ce⁴⁺ cations, via covalent bonding. Ionic bonds are stronger than ionic-covalent bonds and do not depend on the ZrO₂ phase composition. Zr_0.5Ce_0.5O₂ is inactive in these reactions because of the strong interaction of Zr and Ce cations. It is suggested that Ce^{(4 + β)+} coordinatively unsaturated cations exist on its surface, and their acid strength is lower than that of Zr⁴⁺ and Ce⁴⁺ cations in ZrO₂ and CeO₂, according to the order ZrO₂ > CeO₂ ≥ Zr_0.5Ce_0.5O₂. Neither TPR nor adsorption of probe molecules revealed Zr cations on the surface of the mixed oxide.     

ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> binary oxides as promising supports for palladium catalysts of hydrodechlorination

Deposited palladium catalysts of the hydrodechlorination of 1,3,5-trichlorobenzene were studied. Pure zirconium and aluminum oxides and ZrO₂-Al₂O₃ mixtures with 1, 5, and 10 mol % Al₂O₃ prepared by coprecipitation were used as supports. Palladium was deposited by the precipitation of its hydroxide on supports. Catalysts on binary supports (ZrO₂ + 1% Al₂O₃ and ZrO₂ + 5% Al₂O₃) exhibited higher activity and stability in hydrodechlorination compared with catalysts on pure supports. The suggestion was made that the high activity and stability of these systems in hydrodechlorination was related to the formation of binary oxide in the interaction of ZrO₂ with palladium oxide at the stage of annealing of the catalyst precursor. Binary oxide, which was a center of the activation of the C-Cl bond, was simultaneously a source of active hydrogen. The presence of various palladium states in catalysts was substantiated by the temperature programmed reduction method.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

Interactions in the Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript>-Ti<Subscript>2</Subscript>O<Subscript>3</Subscript> System

Interactions in the Al₂TiO₅-Ti₂O₃ system were studied and the regions of existence of Al_2?2xTi _2x ³⁺ Ti⁴⁺O₅ solid solutions with a pseudobrookite structure were determined.     

Structure and real composition of undoped and Cr- and Ni-doped Sr<Subscript>0.61</Subscript>Ba<Subscript>0.39</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> single crystals

Strontium barium niobate crystals with congruent melting composition Sr_0.61Ba_0.39Nb₂O₆ (SBN-61), both nominally pure and doped with Cr³⁺ и Ni³⁺ ions, have been investigated by neutron diffraction. Different strontium and barium contents as well as their different distribution over the Sr1, of Sr2 and Ba2 crystallographic sites of SBN-61 structure, caused by introduction of dopants, have been revealed. Coordination polyhedra of cations have been established based on the analysis of cation–anion internuclear distances together with the calculation of bond-valence sums for cations, which are equal to their formal charge. It was found that the Nb1 and Nb2 atoms are located in distorted octahedra with quadfurcated (the Nb1O₆ polyhedron) or bifurcated (the Nb2O₆ polyhedron) vertices, and the Sr1 atoms are located in a cuboctahedron with bifurcated vertices in the base plane. Different polyhedra have been revealed for the Sr2 and Ba2 atoms: Sr2 atoms are coordinated by 15 oxygen atoms to form a highly distorted five-capped pentagonal prism, whereas Ba2 atoms are located in a highly distorted three-capped trigonal prism with a coordination number 9. Comparison of interatomic and internuclear distances, determined by X-ray and neutron diffraction analyses, respectively, allowed to reveal a highly pronounced shift of electron density in Nb1 and Sr2 polyhedra, responsible for the covalent bond and properties of crystals. Location of Cr³⁺ и Ni³⁺ dopant ions in the SBN-61 structure as well as their formal charges has been discussed.     

Transition metal salts of H<Subscript>4</Subscript>PMo<Subscript>11</Subscript>VO<Subscript>40</Subscript> for efficient H<Subscript>2</Subscript>S removal in the liquid redox process

Several transition metal (Cu²⁺, Fe³⁺, Zn²⁺, Mn⁴⁺, and Cr⁶⁺) salts of H₄PMo₁₁VO₄₀ were prepared and their solutions were used initially for H₂S removal in the liquid redox process. H₂S removal tests were performed by dynamic absorption experiments. Among these polyoxometalates, that with the Cu²⁺ cation was found to have pronounced H₂S removal performance with the removal efficiency of up to 98%. The relevant oxidative desulfurization mechanism and the role of Cu²⁺ were studied.     

Structure and some properties of [UO<Subscript>2</Subscript>CrO<Subscript>4</Subscript>{CH<Subscript>3</Subscript>CON(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

A new complex [UO₂CrO₄{CH₃CON(CH₃)₂}₂] (I) was studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are monoclinic: a = 13.8108(11) Å, b = 8.6804(7) Å, c = 13.0989(10) Å, β = 104.777(1)°, V = 1518.4(2) ų, space group P2₁/c, Z = 4, R = 2.39%. The structure of I contains infinite chains of the [UO₂CrO₄{CH₃CON(CH₃)₂}₂] composition running along [001]; the complex belongs to the AT¹¹M¹ ₂ crystal-chemical group (A = UO ₂ ²⁺ , T¹¹ = CrO ₄ ^2? , M¹ = CH₃CON(CH₃)₂) of uranyl complexes. The chains are linked into a three-dimensional framework due to hydrogen bonds between oxygen atoms of chromate ions and hydrogen atoms of methyl groups of the dimethylacetamide.     

Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Radiotracer study of the adsorption of sulfate ions at a Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> powder/electrolyte solution interface

The pH and concentration dependence of the adsorption of sulfate ions on powdered Bi₂O₃ was studied by a radiotracer technique in the presence of a large excess of perchlorate supporting electrolyte. It was found that, similar to other oxides such as Al₂O₃, Cr₂O₃ and Fe₂O₃, the extent of adsorption is determined by the protonation of the Bi₂O₃ surface. The redox transformations of Bi adatom layers are discussed in the light of the results obtained. It is established that for the interpretation of the redox processes occurring at the Bi/electrolyte interface the role of protonation of the oxide formed and the anion adsorption induced by the oxide layer should be taken into consideration. Electronic Publication     

Trimetallic NiMoW/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> hydrotreating catalyst based on H<Subscript>4</Subscript>SiMo<Subscript>3</Subscript>W<Subscript>9</Subscript>O<Subscript>40</Subscript> mixed heteropoly acid

Trimetallic NiMoW/Al₂O₃ catalyst was prepared using mixed H₄SiMo₃W₉O₄₀ heteropoly acid of Keggin structure and nickel citrate. Bimetallic NiMo/Al₂O₃ and NiW/Al₂O₃ catalysts based on H₄SiMo₁₂O₄₀ and H₄SiW₁₂O₄₀, respectively, were synthesized as reference samples. The use of mixed H₄SiMo₃W₉O₄₀ heteropoly acid as an oxide precursor allows the tungsten sulfidation degree and the degree of promotion of active phase particles to be increased. The hydrodesulfurization activity is enhanced as compared to NiW/Al₂O₃ catalyst. The synergistic enhancement of the activity of the NiMo₃W₉/Al₂O₃ catalyst relative to the bimetallic analogs is probably caused by formation of new mixed promoted active sites for direct desulfurization.     

The Microstructure of Cobalt Silica Gel Catalyst in the Presence of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Additive

The physico-chemical characteristics and microstructure of cobalt silica gel catalysts with an Al₂O₃ additive (up to 10%) for the synthesis of hydrocarbons by the Fischer–Tropsch method are studied using a set of methods including X-ray diffraction, BET, IR spectroscopy, and temperature-programmed reduction of H₂, as well as scanning and transmission electron microscopy. Phases with a spinel structure, Со₃О₄, CoAl₂O₄, and solid solutions on their basis are identified in the samples. The addition of Al₂O₃ changes the degree of heterogeneity and the orientation of the cobalt crystallites in the oxide and reduced forms of the catalysts. Addition of 1% Al₂O₃ stabilizes Со₃О₄ in the spinel form with a structure close to the normal one and promotes the formation of cobalt with a unimodal distribution of particles with an average size of 8 nm. The catalyst is characterized by maximum activity and selectivity with respect to C⁵⁺ carbons.     

Laser assisted selective chemical metalization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> films

Thick aluminum oxide films are prepared on Al plates by anodizing. On the ceramic surface thus obtained a very thin Ag film is deposited via vacuum thermal evaporation. The Ag/Al₂O₃/Al samples prepared are irradiated by Nd:YAG laser through a suitable metal mask in order to remove the top metal film in the exposed areas. Thus, a negative silver image of the copied mask is obtained. Further, the samples are processed in Ni electroless chemical bath activated by the rest of silver. All processing steps are studied by scanning electron microscopy (SEM). EDS X-ray mapping is applied to study the final distribution of Al and Ni in the processed areas. In addition, the DC conductivity of the fabricated Ni wires obtained is measured. The proposed new method for selective chemical deposition of electroconductive Ni onto laser microstructured Ag/Al₂O₃/Al samples is simple, versatile and not restricted to the metal/ceramic system studied as well as to the electroless deposited metal.     

Synthesis and X-ray diffraction study of the LaMg<Superscript>I</Superscript>Mg(CrO<Subscript>3</Subscript>)<Subscript>2</Subscript> (M<Superscript>I</Superscript> = Li,Na, K) compounds

Ternary chromites of the composition LaM^IMg(CrO₃)₂ (M^I = Li, Na, K) were synthesized for the first time by ceramic technology from stoichiometric amounts of high purity grade La₂O₃; pure for analysis grade Li₂CO₃, Na₂CO₃, K₂CO₃, and MgCO₃; and chemically pure grade Cr₂O₃. Using X-ray diffractometry, it has been established that compounds are crystallized in cubic and tetragonal crystal systems, and parameters of their crystal lattices have been determined.     

Novel bimetallic Cr<Subscript>3</Subscript>Yb<Subscript>3</Subscript> mixed salt containing a 3<Emphasis Type="Italic">d</Emphasis>-4<Emphasis Type="Italic">f</Emphasis> heterometallic Cr<Subscript>2</Subscript>Yb<Subscript>3</Subscript> cluster

A novel bimetallic Cr₃Yb₃ coordination compound containing a 3d-4f heterometallic Cr₂Yb₃ cationic cluster has been synthesized and structurally characterized. The crystal structure was determined by X-ray analysis. Results denote that the complex consists of an original [Cr ₂ ^III Yb ₃ ^III ]³⁺ moiety with a trigonal-bipyramidal topology of the [Cr₂Yb₃(μ-OOCCH₃)₆(μ-OH)₆(H₂O)₆]³⁺ core, an isolated [Cr^III(CN)₆]^3? anion, and four molecular neutral 4,4′-bipyridene (Bipy) ligands, namely, [Cr₂Yb₃(μ-OOCCH₃)₆(μ-OH)₆(H₂O)₆][Cr(CN)₆] · 4Bipy · 13H₂O.