Changing catalytic activity during colloidal platinum nanocatalysis due to shape changes: electron-transfer reaction

The shape distribution of the catalytic nanoparticles and the activation energy of the electron-transfer reaction between hexacyanoferrate (III) and thiosulfate ions were determined at different times during the course of the reaction. The activation energy is found to increase during the reaction when dominantly tetrahedral nanoparticles are used, decreases slightly when dominantly cubic nanoparticles are used, and remains almost unchanged when spherical nanoparticles are used. Corresponding changes in the shape of the tetrahedral and cubic, but not spherical, shape is observed. This is consistent with the changes in the activation energy that are observed. The shape distribution and activation energy of dominantly spherical nanoparticles is found to remain stable during the course of the reaction.     

Effect of catalysis on the stability of metallic nanoparticles: Suzuki reaction catalyzed by PVP-palladium nanoparticles

The small size of nanoparticles makes them attractive in catalysis due to their large surface-to-volume ratio. However, being small raises questions about their stability in the harsh chemical environment in which these nanoparticles find themselves during their catalytic function. In the present work, we studied the Suzuki reaction between phenylboronic acid and iodobenzene catalyzed by PVP-Pd nanoparticles to investigate the effect of catalysis, recycling, and the different individual chemicals on the stability and catalytic activity of the nanoparticles during this harsh reaction. The stability of the nanoparticles to the different perturbations is assessed using TEM, and the changes in the catalytic activity are assessed using HPLC analysis of the product yield. It was found that the process of refluxing the nanoparticles for 12 h during the Suzuki catalytic reaction increases the average size and the width of the distribution of the nanoparticles. This was attributed to Ostwald ripening in which the small nanoparticles dissolve to form larger nanoparticles. The kinetics of the change in the nanoparticle size during the 12 h period show that the nanoparticles increase in size during the beginning of the reaction and level off toward the end of the first cycle. When the nanoparticles are recycled for the second cycle, the average size decreases. This could be due to the larger nanoparticles aggregating and precipitating out of solution. This process could also explain the observed loss of the catalytic efficiency of the nanoparticles during the second cycle. It is also found that the addition of biphenyl to the reaction mixture results in it poisoning the active sites and giving rise to a low product yield. The addition of excess PVP stabilizer to the reaction mixture seems to lead to the stability of the nanoparticle surface and size, perhaps due to the inhibition of the Ostwald ripening process. This also decreases the catalytic efficiency of the nanoparticles due to capping of the nanoparticle surface. The addition of phenylboronic acid is found to lead to the stability of the size distribution as it binds to the particle surface through the O(-) of the OH group and acts as a stabilizer. Iodobenzene is found to have no effect and thus probably does not bind strongly to the surface during the catalytic process. These two results might have an implication on the catalytic mechanism of this reaction.     

Catalysis with transition metal nanoparticles in colloidal solution: nanoparticle shape dependence and stability

While the nanocatalysis field has undergone an explosive growth during the past decade, there have been very few studies in the area of shape-dependent catalysis and the effect of the catalytic process on the shape and size of transition metal nanoparticles as well as their recycling potential. Metal nanoparticles of different shapes have different crystallographic facets and have different fraction of surface atoms on their corners and edges, which makes it interesting to study the effect of metal nanoparticle shape on the catalytic activity of various organic and inorganic reactions. Transition metal nanoparticles are attractive to use as catalysts due to their high surface-to-volume ratio compared to bulk catalytic materials, but their surface atoms could be so active that changes in the size and shape of the nanoparticles could occur during the course of their catalytic function, which could also affect their recycling potential. In this Feature Article, we review our work on the effect of the shape of the colloidal nanocatalyst on the catalytic activity as well as the effect of the catalytic process on the shape and size of the colloidal transition metal nanocatalysts and their recycling potential. These studies provide important clues on the mechanism of the reactions we studied and also can be very useful in the process of designing better catalysts in the future.     

Thermolysis of polymeric [Ru(CO)4]infinity to metallic ruthenium: molecular shape of the precursor affects the nanoparticle shape

Pyrolysis of the organometallic polymer [Ru(CO) 4] infinity affords metallic ruthenium nanofibers. The molecular structure, especially the presence of metal-metal bonds, appears to direct the aggregation of the metal atom chains upon loss of the carbonyl ligands.     

FTIR study of the mode of binding of the reactants on the Pd nanoparticle surface during the catalysis of the Suzuki reaction

In the Suzuki reaction between phenylboronic acid and iodobenzene catalyzed by palladium nanoparticles, our previous studies suggested that the phenylboronic acid adsorbs on the nanoparticle surface and then interacts with the iodobenzene that is present in solution. In the present study, FTIR is used to examine the change in the vibrational frequencies of phenylboronic acid in films with and without the addition of palladium nanoparticles. The large change in the B-O stretching frequency of phenylboronic acid from 1348 to 1376 cm(-1) in the presence of sodium acetate and palladium nanoparticles strongly suggests that the mode of binding of phenylboronic acid to the Pd nanoparticle surface involves a B-O-Pd type of bonding. Shifts in the B-C stretching mode and the out-of-plane phenyl C-C ring deformation bands associated with phenylboronic acid provide additional confirmations of the binding process. It is also shown that the phenylboronic acid needs to be in the deprotonated form in the presence of sodium acetate (phenylboronate anion) to bind to the palladium nanoparticle surface. No changes in the characteristic bands of iodobenzene were observed in films made in the presence of the palladium nanoparticles. The FTIR studies provide proof of the mode of binding that occurs in the nanoparticle surface for the first time and also confirms the mechanism of the Suzuki reaction that we proposed previously.     

Effect of microwave irradiation on the reactivity of chloroarenes in Suzuki—Miyaura reaction

Simple catalytic systems for the Suzuki—Miyaura reaction of aryl chlorides under microwave conditions were tested. Microwave irradiation facilitated the reaction course. The catalyst, base, and solvent effect were studied and two reaction systems offered reasonable to high yields within a short time.     

Suzuki芳基偶联反应研究进展

综述了Suzuki芳基偶联反应在机理、底物、催化剂、碱及反应条件等方面的研究进展。     

Electronic nature of N-heterocyclic carbene ligands: effect on the Suzuki reaction

Suzuki reactions of aryl chlorides and arylboronic acids with a range of electronically different N-heterocyclic carbene ligands derived from N,N-diadamantylbenzimidazolium salts are reported. Results indicate that an electron-rich NHC ligand enhances the rate of oxidative addition. However, reductive elimination is unchanged by the electronic nature of the supporting ligand and is primarily affected by the steric environment.     

Effect of reaction media on the growth and photoluminescence of colloidal CdSe nanocrystals

Using cadium oxide (CdO) as the Cd precursor and tri-n-octylphosphine selenide (TOPSe) as the Se source, TOP-capped and TOP/tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals were synthesized without the use of an acid. The synthetic approach involved the addition of a TOPSe/TOP solution into a CdO/TOP solution with or without TOPO at one temperature and subsequent growth at a lower temperature. The temporal evolution of the optical properties, namely, absorption and luminescence, of the growing nanocrystals was monitored in detail. A comprehensive examination on the control of the photoluminescence (PL) properties was performed by systematically varying the TOP/TOPO weight ratio of the reaction media. Surprisingly, a rational choice of 100% TOP or 80% TOP was found to produce "quality" nanocrystals when monitored under the present experimental conditions and growth-time scale. The term "quality" is mainly based on the sharp features and rich substructure exhibited in the absorption spectra of the growing nanocrystals, as well as the sharp features in the emission spectra with narrow full width at half-maximum (fwhm). There are two distinguishable stages of growth: an early stage (<5 min) and a later stage. TOP plays a major role in the control of a slow growth rate in the early stage, while TOPO controls slow growth in the later stage. The optical sensitivity of the growing nanocrystals when dispersed in nonpolar or polar solvents was studied, including two size-dependent parameters, namely, the solvent sensitivity (PL intensity) and nonresonant Stokes shift (NRSS). The insights gained from the present study enable a synthetic approach in which high-quality CdSe nanocrystals are achieved with high synthetic reproducibility.     

An efficient synthesis of chalcones based on the Suzuki reaction

A general method for the synthesis of chalcones based on the Suzuki reaction either between cinnamoyl chlorides and phenylboronic acids or between benzoyl chlorides and phenylvinylboronic acids is described.     

Eumelanin as a support for efficient palladium nanoparticle catalyst for Suzuki coupling reaction of aryl chlorides in water

Eumelanin-supported palladium (Pd) nanoparticle (NP) catalysts was found to exhibit excellent catalytic activities with high turnover number (TON, 2000) and turnover frequency (TOF, 1000 h^?1) for Suzuki cross coupling reaction of aryl chlorides in water. We propose that the amphiphilic property of the eumelanin support helps Pd NPs to catalyse the C–C coupling reaction in water through hydrophobic effect.     

RNA-mediated control of metal nanoparticle shape

RNA sequences previously isolated by in vitro selection were further characterized for their ability to control palladium particle growth. Five pyridyl-modified RNA sequences (Pdases) representing each of the different evolved families were found to form hexagonal plates with a high degree of shape specificity. However, a sixth nonrelated pyridyl-modified RNA sequence was found to form exclusively cubic particles under identical conditions. Replacing pyridyl-modified RNA with native RNA resulted in a complete loss of RNA function. Removing the 3'-fixed sequence region from the Pdase had little effect on particle growth; however, further truncations into the variable region resulted in a significant loss of activity and particle shape control. These Pdases were selected using the organometallic precursor complex tris(dibenzylideneacetone) dipalladium(0) ([Pd2(DBA)3]). Changing the metal center and ligand of the group VIII organometallic precursor complex revealed a strong dependence of particle growth and shape on the DBA ligands. Changing the metal center from Pd to Pt while retaining the DBA ligands gave predominantly hexagonal Pt, but with a decrease in shape control. Taken together, the results of this study suggest that the full-length Pdases contain active sites capable of highly specific molecular recognition of organometallic complexes as particle formation reagents.     

Influence of nanoparticle surface functionalization on the thermal stability of colloidal polystyrene films

The installation of large scale colloidal nanoparticle thin films is of great interest in sensor technology or data storage. Often, such devices are operated at elevated temperatures. In the present study, we investigate the effect of heat treatment on the structure of colloidal thin films of polystyrene (PS) nanoparticles in situ by using the combination of grazing incidence small-angle X-ray scattering (GISAXS) and optical ellipsometry. In addition, the samples are investigated with optical microscopy, atomic force microscopy (AFM), and field emission scanning electron microscopy (FESEM). To install large scale coatings on silicon wafers, spin-coating of colloidal pure PS nanoparticles and carboxylated PS nanoparticles is used. Our results indicate that thermal annealing in the vicinity of the glass transition temperature T(g) of pure PS leads to a rapid loss in the ordering of the nanoparticles in spin-coated films. For carboxylated particles, this loss of order is shifted to a higher temperature, which can be useful for applications at elevated temperatures. Our model assumes a softening of the boundaries between the individual colloidal spheres, leading to strong changes in the nanostructure morphology. While the nanostructure changes drastically, the macroscopic morphology remains unaffected by annealing near T(g).     

Synthesis of chiral binaphthalenes using the asymmetric Suzuki reaction

The synthesis of atropisomeric 1,1′-binaphthalenes can be achieved using an asymmetric Suzuki cross-coupling reaction. The Suzuki reaction leading to such hindered compounds is challenging and competing hydrolytic deboronation frequently dominates unless carefully chosen conditions are employed. The simple, standard mechanism is inadequate when describing the Suzuki coupling of hindered partners. Evidence suggests that the key step leading to asymmetry is transmetallation (delivery of the organometallic by the asymmetric ligand) and the reactions operate under kinetic control. Reductive elimination (itself likely to be triggered by oxidative addition of another molecule of halide) is fast compared with equilibration (epimerisation and/or cis-trans isomerisation).     

Desiccating colloidal sessile drop: dynamics of shape and concentration

Using lubrication theory, drying processes of sessile colloidal droplets on a solid substrate are studied. A simple model is proposed to describe temporal dynamics of both the shape of the drop and the volume fraction of the colloidal particles inside the drop. The concentration dependence of the viscosity is taken into account. It is shown that the final shapes of the drops depend on both the initial volume fraction of the colloidal particles and the capillary number. The results of our simulations are in a reasonable agreement with the published experimental data. Computations for the drops of aqueous solution of human serum albumin are presented.     

Suzuki coupling reaction of 1,6,7,12-tetrabromoperylene bisimide

[STRUCTURE: SEE TEXT] 1,6,7,12-Tetrabromoperylene-3,4,9,10-tetracarboxylic acid bisanhydride and the corresponding tetrabrominated perylene bisimide were first synthesized with high yields. The Suzuki coupling reaction of novel tetrabromoperylene bisimide with phenylbonoric acid was studied. The four bromines in the bay position of the perylene core were substituted successfully to yield 1,6,7,12-teraphenylperylene bisimide. The photochemical properties of the novel perylene bisimides were studied and presented.     

Self-assembly of anisotropic tethered nanoparticle shape amphiphiles

The varied and exotic shapes of new nanoscale organic and inorganic building blocks provide new opportunities to engineer materials possessing specific functionality and physical properties dictated by the unique packings of these particles. We briefly review some of the current strategies for inducing the self-assembly of these building blocks focusing on one strategy in particular—the attachment of tethers to the building blocks at precise locations to create tethered nanoparticle “shape amphiphiles”. We use computer simulation to demonstrate that the resulting anisotropy imparted to nanocrystals or nanocolloids by the tethers can be used to encode simple design rules into the building blocks that ultimately result in a unique self-assembled structure. We present a general classification scheme for tethered nanoparticles wherein the anisotropy of a shape amphiphile is described by a vector comprised of one or more axes each describing a measure of anisotropy.     

Plasmonic heating using an easily recyclable Pd-functionalized Fe3O4/Au core-shell nanoparticle catalyst for the Suzuki and Sonogashira reaction

Palladium functionalized gold nanoparticles were used in the past as a catalyst system in light induced cross-coupling reactions, but with a main limitation of the recuperation. To overcome this problem, a palladium functionalized Fe₃O₄/Au core-shell nanoparticle was successfully synthesized with a peak wavelength of 680 nm from the plasmon resonance of the gold shell. By the presence of the magnetite core, the nanoparticle catalyst can easily be removed using magnetic precipitation. This is accompanied with the advantage of having less valuable gold present in the system. The gold shell makes it possible to induce local heating using plasmon resonance. By this combination, it is possible to recuperate the catalyst system using magnetic precipitation and increase the control and safety of the reaction due to the presence of the light-induced plasmonic heating. It was possible to perform light-induced Suzuki cross-coupling reactions using this catalyst system, but with a dependency of the substrate. It was found that an anionic substrate is repulsed from the negatively charged core-shell nanoparticle. The catalyst was examined on its recuperation abilities and could be reused up to 5 cycles. At the catalytic site a temperature was reached between 40 °C and 45 °C. Despite the promising results of the Suzuki reaction, it was not possible to perform light-induced Sonogashira reactions due to the insufficient heat generation at the catalytic site. Nevertheless, these results are promising in the development of an easily recyclable catalyst together with an alternative heating source, resulting in an increase of control and safety.