Concise synthesis of quinazoline alkaloids, luotonins A and B, and rutaecarpine

The total synthesis of luotonin A was achieved in excellent yield by using a Pd-assisted biaryl coupling reaction of N-(bromoquinolinyl)methylquinazolinone with Cy₃P and KOAc. The successive treatment of luotonin A with NBS and aq. AgNO₃ gave luotonin B in good yield. Although the Pd-assisted coupling reaction of N-(2-bromoindolyl)ethylquinazolinone with Cy₃P and KOAc yielded rutaecarpine in poor yield, N-acetate under the same reaction conditions yielded the desired rutaecarpine directly in excellent yield.     

The first total synthesis of calabricoside A

Quercetin 3-O-[α-l-rhamnopyranosyl-(1→2)-α-l-arabinopyranoside]-7-O-β-d-glucopyranoside (calabricoside A), a new flavonol triglycoside isolated from the aerial parts of Putoria calabrica showing strong radical scavenging activity, was synthesized through a combination of phase-transfer-catalyzed C-3 glycosylation and AgOTf promoted homogeneous C-7 glycosylation in CH₂Cl₂.     

A new study on solid-state cyanine dye-sensitized solar cells

A new cyanine dye, 7-{1-[2-(4-morpholine-1,8-naphthalimide)ethyl]-1H-1,2,3-triazol-4-}-2-[3-(5-carboxyl-1,3-dihydro-3,3-dimethyl-1-butyl-indolin-2-methylene)-propenyl]-1,1-dimethyl-3-buty-1H-benzo[e]indolium iodide (BIDC), has been synthesized and identified with regard to its structure and photoelectrochemical properties used as a sensitizer on dye-sensitized solar cells. A novel solid-state electrolyte with polyaniline-loaded carbon black (PACB)-1-methyl-3-propylimidazolium iodide (MPII) composite was investigated on these dye-sensitized solar cells (DSCs). The short-circuit photocurrent density (J _sc), open-circuit photovoltage (V _oc) and fill factor (ff) under 200 W/m² white light from a xenon lamp are 0.44 mA/cm², 550 mV and 0.58, respectively, yielding an overall conversion efficiency (η) of 0.7%. The most merit of the solid-sate electrolyte was free of volatile and flammable fluid components and easy of encapsulation for DSCs.     

Vibrational and theoretical studies on CF3SNH2: A compound containing an SNH2 group

The structure and conformational behaviour of CF₃SNH₂ have been studied by ab initio calculations (HF/3-21G* (with additional d-functions on nitrogen, α_d: 0.8) and HF/6-31G**) and vibrational spectroscopy. Both theoretical methods predict a trans form (CS bond in trans position with respect to the N lone pair, C_s symmetry) to be more stable than the corresponding cis conformer by 1.5 and 0.7 kcal/mol, respectively. The calculated barriers to inversion are 2.7 (HF/3-21G*) and 1.6 kcal/mol (HF/6-31G**). A depolarized band observed in the Raman spectra of the liquid is in accordance with the existence of a plane of symmetry in the molecule. A normal coordinate analysis was performed for the A′ modes of vibration.     

A series of open-framework tin(II) phosphates: A[Sn4(PO4)3] (A=Na,K, NH4)

A new series of isostructural open-framework tin(II) phosphates with general formula A[Sn₄(PO₄)₃], where A=Na, K, NH₄, has been synthesized by hydrothermal methods. The crystal structures of NaSn₄(PO₄)₃ (I) and KSn₄(PO₄)₃ (II) have been solved by single crystal X-ray diffraction methods. Both phases crystallize in the trigonal space group R3c (#161) with Z=6 and cell parameters a=9.5508(13) Å, c=24.083(3) Å for I, and a=9.7124(11) Å, c=24.363(3) Å for II. The structure consists of a negatively charged [Sn₄(PO₄)₃]⁻ framework with channels running parallel to the a- and b-axes where the charge compensating A⁺ cations are located. An interesting feature is that half of the channels are empty due to the specific geometry of the SnO₃ units—the lone electron pair of the tin atoms “protrudes” in these channels thus preventing the insertion of A⁺. The new phases have also been characterized by infrared and thermogravimetric analyses.     

A new synthesis of platinum—carbon bonds

Syntheses of cis-[PtCl(CH₂COCH₃)(PEt₃)₂], cis-[PtCl(CH₂NO₂) (PEt₃)₂], and trans-[Pt(CCPh)₂ (PEt₃)₂] are described. The procedure involves reaction of cis-[PtCl₂(PEt₃)₂] with Ag₂O and acidic CH bonds to precipitate AgC1 and generate a PtC bond. The method may represent a new general route to platinum—carbon bonds.     

A novel heterobidentate chiral phosphine and its coordination chemistry in transition metal clusters

The optically active ligand R,R-PHAZAN (1,3-bis[(1R)-1-Phenylethyl]-2-(2-thienyl)-1,3,2-diazaphospholane) has been prepared and the products resulting from the reactions with Rh₆(CO)₁₅NCMe, H₃RhOs₃(CO)₁₂, and H₄Ru₄(CO)₁₂ have been investigated by X-ray crystallography and a variety of multinuclear NMR methods. X-ray studies show that PHAZAN can behave as a bidentate ligand in Rh₆(CO)₁₄(μ₂,κ²-R,R-PHAZAN) (with coordination through P and S) or a monodentate ligand (through P coordination) in H₄Ru₄(CO)₁₁(κ¹-R,R-PHAZAN) and NMR studies show that these structures are retained in solution. In Rh₆(CO)₁₄(μ₂,κ²-R,R-PHAZAN), edge-bridging coordination of PHAZAN results in the formation of an additional two novel chiral centres and these are observed in solution. Reaction of PHAZAN with H₃RhOs₃(CO)₁₂ results in cleavage of the thienyl group and formation of the phosphido cluster, H₂RhOs₃(CO)₁₁(μ₂-PNN), (PNN = 1,3-bis-(1-phenylethyl)-[1,3,2]diazaphospholidine-2-yl). A variety of NMR measurements show that the hydride site-occupancies in the solid state are retained in solution and there is evidence for interaction of an ortho-phenyl hydrogen and a hydride through “dihydrogen” bonding.     

Stereoselective ring-opening reactions with AcBr and AcCl. A new method for preparation of some haloconduritols

The actions of AcX (X=Br, Cl) on 7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetates and a transoid-epoxide prepared from the acetonide of cyclohexa-3,5-diene-cis-1,2-diol were studied. H₂SO₄-catalyzed cleavage of exo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcCl gave (1α,2α,3α,6β)-6-chloro-4-cyclohexene-1,2,3-triol triacetate, from which the corresponding chloroconduritol was obtained by trans-esterification (MeOH/HCl). A similar reaction of the exo-diacetate with AcBr in the presence of H₂SO₄ resulted in bromine addition. The formation of bromine from the reaction of AcBr and H₂SO₄ was observed by independent experiments. H₂SO₄-catalyzed reaction of endo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcX (X=Br, Cl) gave (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates. The reaction of the transoid-epoxide with AcX (X=Br, Cl) with no catalyst gave also (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates.     

A new one-pot synthesis of Gb3 and isoGb3 trisaccharide analogues

Gb₃ and isoGb₃ are both biologically important oligosaccharides. A new efficient synthesis of Gb₃ and isoGb₃ trisaccharide analogues has been achieved by one-pot sequential glycosylation strategy starting from simple monosaccharide building blocks promoted by N-(phenylthio)-?-caprolactam at room temperature.     

Concise formal synthesis of (+)-pyripyropene A

A concise enantioselective synthesis of A/B bicyclic segment of naturally occurring α-pyrone meroterpenoid pyripyropene A is achieved in 9 steps (LLS) and 7.5% yield starting from R-(?)-carvone. The significant points of the synthesis include: (1) an intramolecular 1, 3-dipolar cycloaddition reaction to construct the A ring and assemble C4 quaternary carbon stereocenter as well; (2) reductive cleavage of the oxazole motif utilized Raney Ni/B(OCH₃)₃.     

A type 2 Ferrier rearrangement-based synthesis of d-myo-inositol 1,4,5-trisphosphate

The synthesis of d-myo-inositol 1,4,5-trisphosphate (InsP₃) from methyl α-d-glucopyranose, via a type 2 Ferrier rearrangement is reported. A key intermediate in this synthesis possesses orthogonal protecting groups at the 1-, 4- and 5-position, making it a versatile starting point for the synthesis of unnatural InsP₃ derivatives. Biological evaluation of the synthetic InsP₃ demonstrates that this compound evokes selective Ca²⁺ release via activation of InsP₃ receptors.     

A novel trinuclear titanium(IV) complex with a C3 axis along Ti1–Ti2–Ti3 containing 3-[(1H-1,2,4-triazol-1-yl)methyl]-BINOLate ligands: synthesis,structure, and reactivity

A new modified BINOL, (S)-3-[(1H-1,2,4-triazol-1-yl)methyl]-1,1′-binaphthol, was prepared. In the presence of titanium tetraisopropoxide, this ligand showed moderate catalytic properties for the asymmetric addition of diethylzinc to aldehydes. By treating rac-3-[(1H-1,2,4-triazol-1-yl)methyl]-1,1′-binaphthol with excess titanium tetraisopropoxide, a novel trinuclear titanium(IV) complex was obtained. A C₃ axis along Ti1–Ti2–Ti3 is present in the molecule.     

A new ruthenium complex with benz[f]indenyl ligand for living radical polymerization

A new ruthenium complex with benz[f]indenyl ligand, (η⁵-benz[f]indenyl)Ru(PPh₃)₂Cl (4), was synthesized and characterized by X-ray diffraction analysis. Complex 4 was examined in comparison with its indenyl analogue (η⁵-indenyl)Ru(PPh₃)₂Cl (3) in living radical polymerization of styrene (St) and methyl methacrylate (MMA). Linear increase of molecular weights with conversion and low polydispersities (1.09-1.19 for St, 1.11-1.17 for MMA) were obtained with 4.     

A new layered indium selenium oxychloride material: Synthesis,structure, and characterization of InSeO3Cl

A new layered indium selenium oxychloride material, InSeO₃Cl has been synthesized by a standard solid-state reaction using In₂O₃, InCl₃, and SeO₂ as reagents. Single-crystal X-ray diffraction was used to determine the structure of the reported material. InSeO₃Cl crystallizes in the orthorhombic space group Pbca (No. 61), with a = 7.0580(14) Å, b = 7.0390(14) Å, c = 16.206(3) Å, V = 805.1(3) Å³, and Z = 8. InSeO₃Cl has a layered structure consisting of distorted InO₄Cl₂ octahedra and SeO₃ polyhedra. The Se⁴⁺ cations are in asymmetric coordination environment attributed to their stereoactive lone pairs. The lone pairs on the Se⁴⁺ cations approximately point in the [101], [?10-1], [10-1], and [?101] direction. A separation of the halophile and the chalcophile moieties is observed from the reported material. Detailed structural analysis with full characterization including infrared spectroscopy, bond valence calculations, thermogravimetric analysis, elemental analysis, and dipole moment calculations are reported.     

Alternative synthesis of cystothiazole A

Palladium-catalyzed methoxycarbonylation of (−)-(2R,3S)-1-tert-butyldimethylsiloxy-3-methyl-2-methoxypenta-4-yne 9 derived from (2R,3S)-epoxy butanoate 5 gave the acetylenic ester 10, which was treated with MeOH in the presence of Bu₃P to afford selectively (Z)-β-methoxy acrylate congener 11 in 86% yield. Treatment of (Z)-11 with 99.8% enrichment of CDCl₃ followed by consecutive desilylation and oxidation afforded the left-half aldehyde (+)-2. The overall yield (10 steps from 5; 23%) of (+)-2 via the present route was improved in comparison to that (10 steps from 5; 10%) of the previously reported route. By applying the modified Julia's coupling method, selectivity (E/Z=14:1) of the (E)-form (cystothiazole A 1) against the (Z)-form was improved in comparison to the Wittig method (E/Z=4:1 to 6.9:1).     

Glycosides of marine invertebrates. XV. A new triterpene glycoside — Holothurin A1 — From Caribbean holothurians of the family Holothuriidae

A glycoside, holothurin A₁ has been isolated from the polar glyosidic fractions of the holothuriansH. floridana andH. grisea. The complete structure of the glycoside has been established; it is: 3β-[0-(3-0-methyl-β-D-glucopyranosyl)-(1 → 3)-0-β-D-glucopyranosyl-(1 → 4)-0-β-D-quinovopyranosyl-(1 → 2)-(4-sulfato-β-D-xylopyranosyl)oxy]holosta-9(11)-ene-12α,17α,22ξ-triol. Details of the IR and¹H and¹³C NMR spectra of the compounds obtained are given.     

Octahedral metal carbonyls : XL. A reinvestigation of the kinetics and mechanism of ligand exchange in (2,2,8,8-tetramethyl-3,7-dithianonane)- tetracarbonyltungsten(0)

A reinvestigation of the kinetics and mechanism of ligand-exchange reactions of (2,2,8,8-tetramethyl-3,7-dithianonane)tetracarbonyltungsten(0) ((DTN)W(CO)₄) with alkyl and aryl phosphites (L) to afford trans- and cis-L₂W(CO)₄ products supports a mechanism involving initial ring-opening, and subsequent competition between ring-reclosure and attack at the “ring-opened” five-coordinate, probably fluxional, intermediate, by L. A competing path, involving ring-reclosure in cis-(η¹-DTN)W(CO)₄(L) species with expulsion of L to afford the substrate is also to be inferred from the rate data. For L = P(OCH₂)₃CCH₃, an intermediate of this type, cis-DTN)W(CO)₄(L) was isolated and characterized, and the kinetics of its formation and decomposition were studied. The data provide conclusive evidence for the operation of the ring-opening mechanism in these Systems.     

N-[1-(Benzotriazol-1-yl)alkyl]amides from N-acyl-α-amino acids or N-alkylamides

A variety of N-(1-methoxyalkyl)amides react with benzotriazole in the presence of PPh₃·HBF₄ and organic bases (Hünig's base, DBU or DABCO) or solid-state-supported bases (SiO₂-Pip or IRA-67) in CHCl₃ to give N-[1-(benzotriazol-1-yl)alkyl]amides in good yields. The most convenient and efficient procedure for obtaining N-[1-(benzotriazol-1-yl)alkyl]amides consists, however, of the addition of benzotriazole sodium salt to a solution of crude 1-(N-acylamino)alkyltriphenylphosphonium salt, obtained in situ from N-(1-methoxyalkyl)amides and PPh₃·HBF₄. A combination of these reactions with the recently described electrochemical decarboxylative α-methoxylation of N-acyl-α-amino acids in the presence of SiO₂-Pip enables an effective two-pot transformation of N-acyl-α-amino acids to N-[1-(benzotriazol-1-yl)alkyl]amides.     

A facile synthetic route to 2-trifluoromethyl-substituted polyfunctionalized chromenes and chromones

A method for the preparation of methyl 4-hydroxy-2-(trifluoromethyl)-4H-chromenes-3-carboxylate derivatives 3a–j from readily available trifluoromethylated building block methyl (Z)-2-bromo-4,4,4-trifluoro-2-butenoate 1 was described. Treatment of 3a–j with Sarrett reagent in CH₂Cl₂ generated methyl 4-oxo-2-(trifluoromethyl)-chromene-3-carboxylate derivatives 4a–h with moderate to good yields, which can be converted to 2-trifluoromethyl-substituted multifunctional benzoxepins through cyclopropanation and Lewis acid-catalyzed ring opening.     

A novel copper(II) complex with schiff base derived from o-vanillin and L-methionine: Syntheses and crystal structures

A new Schiff base copper(II) complex, {[CuL(H₂O)₂][CuL(H₂O)]₃ · 4H₂O · C₃H₇NO} _n (H₂L = (Z)-2-(2-hydroxy-3-methoxybenzylideneamino)-4-(methylthio)butanoic acid), was synthesized and characterized by IR, UV, and X-ray diffraction single-crystal analysis. The crystal belongs to the triclinic crystal system, space group with cell parameters a = 5.2027(5) Å, b = 16.6916(16) Å, c = 20.237(2) Å, α = 88.895(10)°, β = 84.127(1)°, γ = 83.577(10)°, V = 1737.2(3) ų, Z = 1, F(000) = 848, S = 1.042, ρ_calcd = 1.561 g cm^?3, μ = 1.411 mm^?1, the final R ₁ = 0.0760 and wR ₂ = 0.2318 for 6030 observed reflections (I > 2σ(I)). The crystal structure of the complex contains two independent units with different coordination environments. In independent unit 1, the Cu(1) is five-coordinated by one nitrogen atom and two oxygen atoms from the Schiff base ligand and two oxygen atoms from two water molecules to form a distorted square pyramid geometry. On the other hand, in independent unit 2, the Cu(2) is five-coordinated and possesses a slightly distorted square-pyramidal coordination geometry, defined by one nitrogen atom, one hydroxyl oxygen atom, two carboxylate oxygen atoms in two different ligands, and one oxygen atom of the water molecule. The complex forms a one-dimensional chain polymer in the xy plane through carboxyl oxygen atoms in the Schiff base ligands.