Bis-β-sulfanylethylester and cyclic disulfide-S-oxides as precursors of bifunctionalized anionic derivatives with two oxidized sulfurs

The cyclic disulfide and the bis-β-sulfanyl ethyl ester derived from dithiol, N,N′-1,2-phenylenebis(3-methyl-3-sulfanylbutanamide) were used as precursors to prepare upon oxidation the cyclic disulfide-S-oxides and the thioether sulfur oxidized species including thioether/sulfoxide, bis-sulfoxide, sulfoxide/sulfone, and bis-sulfone. Ring cleavage with KOH/EtOH of the cyclic disulfide-S-monooxide followed by reaction of the opened intermediate with ethyl acrylate afforded the sulfinate/β-sulfanyl ethyl ester derivative. Selective oxidation with 1 and 2 equiv of (3S)-3-tert-butyl-3-methyl-2-(phenylsulfonyl)oxaziridine or with 3 equiv of DMD led to the isolation of a series of compounds containing a sulfonate and a β-sulfanyl, a β-sulfinyl, and a β-sulfonyl ethyl ester. Retro-Michaël reaction applied to the β-sulfonyl/β-sulfinyl and bis-β-sulfonyl derivatives enabled to produce compounds containing a sulfinate and a β-sulfinyl or a β-sulfonyl ethyl ester as well as the bis-sulfinate dianion. DMD oxidation of the latter afforded the bis-sulfonate dianion. All these anionic species were characterized by ¹H NMR, mass spectrometry, HRMS or elemental analysis. Sulfenates in such pseudopeptidic structures could not be isolated from the ring cleavage of the cyclic disulfide-S-dioxide or from a retro-Michaël reaction applied to the β-sulfinyl ethyl ester. A cyclization reaction leading to an isothiazolidin-3-one is likely to occur as observed from the ring cleavage of the cyclic disulfide-S-dioxide. Finally, Ni(II) and Co(III) have been inserted into the disulfinate dianion leading to the corresponding diamidato/disulfinato complexes S-bonded to Ni(II) or Co(III) centers.     

Synthesis and odor of optically active trans-2,2,6-trimethylcyclohexyl methyl ketones and their related compounds

The synthesis characterized by cationic olefin cyclizations accomplished using ketone enol esters and odor of novel (1R,6S)- and (1S,6R)-2,2,6-trimethylcyclohexyl methyl ketones (5) are described. The stereoselective syntheses of (E)-(1R,6S)- and (E)-(1S,6R)-1-(2,2,6-trimethylcyclohexyl)-2-buten-1-one (6) and (1R,6S)-ethyl 2,2,6-trimethylcyclohexylcarboxylate (7), useful raw materials for flavor and fragrance, starting from the (1R,6S)- and (1S,6R)-5 are also described.     

Synthesis of a novel 14-membered highly constrained cyclic peptidic scaffold

The synthesis and NMR analysis of a novel highly constrained scaffold is described. The 14-membered macrocyclic ring structure was inspired by many medicinally relevant natural products that also contain the bi-aryl ether moiety. The synthesis required only commercially available starting materials and involved a base mediated S_NAr cyclization. A conformational search was performed, which indicated a strong preference for a single conformation, which was consistent with observed ROE signals by NMR.     

Synthesis of reversible cyclic peptides

A novel approach for the synthesis of cyclic peptides that can exist in either linear or cyclized conformations is described. Synthesis of the peptides was achieved via a modified solid phase methodology. The reversible linear/cyclized (i.e., open/closed) states are controlled via the reduction/oxidation of a disulfide bond incorporated into the backbone of the peptide chain.     

Synthesis of Some Novel Class of Bis(isoxazoline) and Bis(aziridine) Derivatives

Synthesis of some new bis(isoxazoline) derivatives has been described from terepthaldehyde derived bis(nitrones) using microwave irradiation via 1,3‐dipolar cycloaddition reaction. Bis(isoxazoline) derivatives in turn successfully converted into new bis(aziridine) derivatives via Baldwin rearrangement. Simple reaction methodology, non involvement of catalysts, and good to excellent yields are the important features noticed in this synthesis.     

3-Halomethylated cyclic nitronates: synthesis and nucleophilic substitution

A method for the introduction of a halogen atom into the methyl group attached to the C-3 atom of five- and six-membered cyclic nitronates (isoxazoline N-oxides and oxazine N-oxides, respectively) has been studied. The process involves silylation of starting 3-methyl-substituted cyclic nitronates followed by halogenation of the resulting N-(silyloxy)enamines. While five- and six-membered cyclic enamines behave similarly toward elemental bromine and iodine, their reactions with NBS give different products, that were rationalized by stereoelectronic effects. The obtained halogenated nitronates were coupled with various nucleophiles affording new nitronates functionalized at the C-3 position.     

Sulfonium ylides derived from 2-hydroxy-benzoquinones: crystal and molecular structure and their one-step conversion into Mannich bases by amine N-oxides

Reaction of 2-hydroxy-para-benzoquinones with DMSO/Ac₂O produced dimethylsulfonium ylides, of which crystal structures as well as solid and liquid state NMR spectra were recorded. The ylides react with tertiary methylamine N-oxides in a one-pot, multi-step process to 3-methylamino-substituted benzoquinones. The mechanism starts with a deoxygenative deprotonation of the amine N-oxides, followed by a formal electrophilic displacement of DMSO by the resulting carbonium-iminium ion.     

Synthesis of cyclic peptides via O-N-acyl migration

We describe here a novel and convenient synthesis of head-to-tail cyclic peptide avoiding racemization. Linear depsipeptides including a serine residue as the key element for ester bond formation and acyl transfer were synthesized on 2-chlorotrityl chloride resin. After cleavage from the resin, intramolecular head-to-tail cyclization was performed in solution by C-terminal activation of urethane protected O-acyl serine residue. After removal of the N^α-serine protecting group, the final step consisted in O-N-acyl migration reaction on the ‘switch’ or ‘click’ element to restore native cyclic peptides.     

Synthesis of N-substituted cyclic triglycines and their response to metal ions

N,N^′,N^″-Trisubstituted-cyclo-triglycines were synthesized. The major conformation of these compounds has C₃ symmetry, and the carbonyl groups and substituents on the nitrogen are inclined in the same direction. Their response to various metal ions was estimated by constructing ion-selective electrodes. Two of them responded selectively to Ca²⁺ over other cations, demonstrating that N,N^′,N^″-trisubstituted-cyclo-triglycines provide a new scaffold to act as host molecules.     

Construction and structural analysis of mono- and heterobimetallic bis(titanate) molecular cages

To explore the utility of bis(dihydroxynaphthalene) ligands for the construction of supramolecular structures, we demonstrated the preparation of cage-shaped complexes by combining these ligands with hexacoordinate titanium(IV). The reaction of biphenylenebis(dihydroxynaphthalene) with TiO(acac)₂ proceeded in the presence of N-methylmorpholine in DMF and an M₂L₃-type cage was obtained by self-organization. As an extension of this work, the preparation of heterobimetallic molecular cages was examined by using combinations of titanium(IV), palladium(II) or platinum(II), and pyridyldihydroxynaphthalenes. Ti(IV)/Pd(II) cages were prepared in one pot by treatment of the pyridyldihydroxynaphthalene ligands with TiO(acac)₂ followed by PdCl₂(MeCN)₂. In the preparation of Ti(IV)/Pt(II) cages, platinum(II)-bridged bis(dihydroxynaphthalene) ligands were isolated in advance from the reaction of pyridyldihydroxynaphthalene ligand precursors with K₂PtCl₄, which were then deprotected and reacted with TiO(acac)₂ in the same conditions as those for biphenylenebis(dihydroxynaphthalene). The precise structures of the Ti(IV)/Pd(II) and Ti(IV)/Pt(II) heterobimetallic cages were fully elucidated by X-ray crystallographic analysis.     

Synthesis of fluorinated cyclic s-trans vinylogous acid and amide ester derivatives

A two-step procedure for the preparation of ethyl 4-amino-2-oxo-6-(trifluoromethyl)cyclohex-3-ene-1-carboxylate (enaminone) and methyl 4-hydroxy-2-oxo-6-(trifluoromethyl)cyclohex-3-ene-1-carboxylate (vinylogous acid) has been accomplished, using reactive Michael acceptors under basic condition. In addition, acyclic trifluoromethylated ester derivatives were isolated as competing by-products. The above compounds represent novel synthetically useful trifluoromethyl building blocks.     

(N-Arylaminomethyl)pyridine-N-oxides: Synthesis and characterization of potential ligand systems and the formation of their N,O-chelate aluminum complexes

Pyridine-N-oxide-2-carbaldehyde (4a) was converted to the corresponding imine (5a) by treatment with 2,6-diisopropylaniline. Subsequent reduction with a sodium borohydride gave the corresponding (N-arylaminomethyl)pyridine-N-oxide derivative (6a). A series of analogous compounds was prepared starting from the respective (aldimino)quinoline-N-oxide (4b) or (ketimino)pyridine-N-oxide (10) systems. Deprotonation of the (aminomethyl)pyridine-N-oxides resulted in a series of unexpected reactions, such as coupling, internal redox reactions or fragmentation. Eventually, the N,O-chelate aluminum complexes (22, 23) derived from the (aminoethyl)pyridine-N-oxide ligand systems could be obtained by treatment of the respective iminopyridine-N-oxides with trimethylaluminum. Many products were characterized by X-ray diffraction.     

Synthesis and reactions of 3-halomethyl-substituted oxazine N-oxides

A series of 3-halomethyl-5,6-dihydro-1,2-oxazine N-oxides (halogen = Cl, Br, I) is prepared from 4-phenyl-3,6,6-trimethyl-5,6-dihydro-4H-oxazine N-oxide by means of a silylation/halogenation sequence. The obtained halogenated N-oxides undergo reactions typical of cyclic six-membered nitronates including 1,3-dipolar cycloaddition, addition of nucleophiles, and substitution of the halogen by C-, S-, and N-nucleophiles.     

Synthesis,characterization and comparative studies of mono- and dimeric copper(II) complexes containing tripodal ligands

Mono and dimeric bromo-bridged copper(II) complexes of the type [CuBr₂(L)] and [Cu₂Br₂(L)₂](ClO₄)₂ containing nitrogen donor tripodal ligands L = 2,6-bis(pyrazol-1-yl)pyridine (bppy) or 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy) have been synthesized. All complexes have been characterized by elemental analysis, IR, ESR and electronic spectra and magnetic susceptibility and cyclic voltammetry measurements.     

Selective synthesis of mono- and distannylpyridines from chloropyridinols via an SRN1 mechanism

A selective two-step synthesis of either mono- or distannylated pyridines from commercially available pyridinols, involving its conversion to the corresponding diethyl pyridyl phosphates (pyDEP) followed by the reaction with Me₃SnNa in liquid ammonia, is described.The results obtained clearly indicate that the reactions proceed through an unimolecular radical nucleophilic substitution mechanism (S_RN1) with intermediacy of a monosubstitution product.     

Application of tri- and tetrasubstituted alkene dipeptide mimetics to conformational studies of cyclic RGD peptides

The first application of a combination of novel ψ[(E)-CXCX]-type alkene dipeptide isosteres to conformation studies of cyclic bioactive peptides was carried out (X=H or Me). For exploration of bioactive conformations of Kessler's cyclic RGD peptides, cyclo(-Arg-Gly-Asp-d-Phe-Val-) 1 and cyclo(-Arg-Gly-Asp-d-Phe-N-MeVal-) 2, d-Phe-ψ[(E)-CXCX]-l-Val-type dipeptide isosteres were utilized having di-, tri- and tetrasubstituted alkenes containing the γ-methylated isosteres that have been reported to be potential type II′ β-turn promoters. All of the (E)-alkene pseudopeptides 3-6 exhibited higher antagonistic potency against α_vβ₃ integrin than 1, although potencies were slightly lower than 2. Detailed structural analysis using ¹H NMR spectroscopy revealed that representative type II′ β/γ backbone arrangements proposed for 1, were not observed in peptides 3-6. Rather on the basis of ¹H NMR data, the conformations of peptides 3-6 were estimated to be more analogous to those of the N-methylated peptide 2.     

Synthesis of 1-pyrroline 1-oxides analogous to pseudouridine

Pseudouridine (ψ-uridine, Ψ) aza′-analogues with a 5,5-bis(hydroxymethyl)-1-pyrrolin-2-yl 1-oxide as the glycone mimic were obtained by the addition of (2,4-dimethoxypyrimidin-5-yl)magnesium bromide to 1-aza-7,14-dioxadispiro[4.2.5.2]pentadec-1-ene 1-oxide (3), followed by oxidation and removal of the protecting groups. The analogous synthesis from (2,4-dimethoxypyrimidin-5-yl)lithium and 3 was less efficient; in the first step of the reaction sequence, competing dimerisation of 3 predominated over addition of the organolithium agent to 3.     

Rearrangement of N-alkyl 1,2-amino alcohols. Synthesis of (S)-toliprolol and (S)-propanolol

N-alkyl 1,2-amino alcohols were rearranged stereospecifically by using TFAA/Et₃N. This rearrangement has been used to synthesize N-isopropyl-3-(aryloxy)-2-hydroxypropylamines, β-adrenergic blocking agents such as (S)-toliprolol and (S)-propanolol.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.