Quinoxaline-annelated Z-shaped quadruple-bridged orthocyclophanes: synthesis and crystal structures

A three-step synthesis of nineteen Z-shaped quadruple-bridged [6,6] and [6,4]orthocyclophanes comprising two quinoxaline-based sidewalls are described. The synthesis began from the bis-Diels−Alder adducts B1-B3 followed by ruthenium-promoted oxidation of dichloroetheno-bridges in the adducts to generate a bis-α-diketones, which were then condensed with various arene-1,2-diamines (9a-g) to construct sidewalls (phane parts) of Z-shaped quadruple-bridged orthocyclophanes D1-3, D2g, and D3g. Single-crystal structures of six orthocyclophanes (D1a, D2a, D2f, D3f, D2g-α, and D3g-α) were obtained and revealed that the C_Ar−H?π and π?π stacking interactions between N-containing arene rings are the major driving force for molecular assembly and crystal packing, in addition to the interactions involving the polar OCH₃ groups and the solvate molecules.     

Polarization effects in mesogenic isoxazoles and 1,3,4-oxadiazoles

Four new series of unsymmetric isoxazoles and 1,3,4-oxadiazoles were prepared, characterized and their mesomorphic properties investigated. Isoxazoles were obtained by condensation–cyclization of β-diketones with hydroxylamine hydrochloride in refluxing THF, while 1,3,4-oxadiazoles were obtained from hydrazine-carboxylate in refluxing POCl₃. Two single crystallographic structures were determined by X-ray crystallographic analysis. A correlated dimeric structure was formed by H-bonds in isoxazoles 1a (n=6), leading to a more elongated structure required for the formation of mesophases. All compounds 1a–c formed N, SmA or/and SmC phases. In contrast, compounds 1d exhibited columnar phases, and an N_cell=14.6 obtained from powder XRD data indicated that a correlated structure formed by four molecules was probably induced in Col_h phases. The better mesomorphic behavior formed in 1a than 1b might be attributed to stronger intermolecular interactions and higher polarization induced in isoxazoles 1a.     

Solid-phase synthesis of liquid crystalline isoxazole library

Combinatorial library of isoxazoles was prepared by 1,3-dipolar cycloaddition on solid support. p-Cyano derivatives showed nematic and/or smectic A phases. A bilayer smectic phase for 2h is proposed by the combination of molecular mechanics calculation and X-ray diffraction experiment.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.     

Parallel synthesis of multi-branched oligosaccharides related to elicitor active pentasaccharide in rice cell based on orthogonal deprotection and glycosylation strategy

We describe a parallel and efficient synthesis of multi-branched oligosaccharides 3a-g based upon the structure of the phytoalexin elicitor active branched pentasaccharide 2. One-pot sequential orthogonal deprotection of tetrasaccharide 5 with three different protecting groups provided each of seven glycosyl acceptors 4a-g. Glycosylation of the acceptors 4a-g, followed by deprotection provided branched oligosaccharides 3a-g. All the reaction processes from scaffold 5 to 3a-g except for final hydrogenolysis were achieved utilizing an automated synthesizer in a parallel fashion.     

Design, synthesis and conformational analysis of turn inducer cyclopropane scaffolds: microwave assisted amidation of unactivated esters on catalytic solid support to obtain γ-turn mimic scaffolds

Novel constrained 1-aroyl-cyclopropane-2,3-cis-dicarboxylic acid bis-[(2-hydroxy-ethyl)-amides] (17a-e) with varied torsional angles have been synthesized in high yield from unactivated esters of 1-aroyl-2,3-cis-diethoxycarbonylcyclopropanes (15a-e) on a catalytic solid support with reduced reaction times by using the monomode-microwave irradiation; 15a-e were obtained by diastereoselective ethoxycarbonylmethylene transfer from a sulfur ylide to ethyl β-aroylacrylates (10a-e). Torsional angles and interatomic distance measurements on the energy minimized structures of the obtained molecules (17a-e, DFT, B3LYP/6-31G^∗ level) have established these molecules as valuable γ-turn mimic scaffolds.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Self-assembly of coil-rod-coil molecules into bicontinuous cubic and oblique columnar assemblies depending on coil chain length

Coil-rod-coil molecules 1–3, consisting of four biphenyls and a p-terphenyl unit linked together with ether bonds as a rod segment and poly(propylene oxide) (PPO) with a degree of polymerization (DP) of 7, 12, 17 as coil segments were synthesized. These molecules contain lateral methyl groups at 2 and 5 positions of the middle benzene ring of p-terphenyl. The self-assembling behavior of molecules 1–3 was investigated by means of DSC, POM and SAXS in the bulk state. Molecule 1 self-organizes into a lamellar structure in the bulk state and transfers into a bicontinuous cubic structure in the liquid crystalline phase. While, molecules 2, 3 containing longer coil chains than 1 self-assemble into the hexagonal perforated lamellar (HPL) structures and the oblique columnar structures in the solid state and liquid crystalline phase, respectively. These results reveal that self-organizing behavior of such molecules is dramatically influenced by the length of the coil chains connected with the rod building block, as well as the lateral methyl groups incorporating in the middle of the rod segment.     

Synthesis and self-assembly of oligomers containing cruciform 9,10-bis(arylethynyl)anthracene unit: formation of supramolecular nanostructures based on rod-length-dependent organization

Conjugated rod-coil molecules, incorporating flexible and rigid blocks, have a strong affinity to self-organize into various supramolecular nanostructures in the bulk state.In this study, we report synthesized oligomers containing cruciform 9,10-bis(arylethynyl)anthracene units and characterized their self-assembly behavior. The molecular structures were characterized with ¹H, ¹³C NMR, and matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectroscopy. An investigation of the supramolecular nanostructures of these molecules using differential scanning calorimetry, thermal polarized optical microscopy, and small-angle X-ray scattering revealed that the rod length of coil-rod-coil molecules with identical rod to coil volume ratios dramatically influences self-assembly behavior in the bulk state. Molecules 2 and 3 with relatively longer rod lengths self-assemble into lamellar structures in the solid state, whereas, molecules 1 and 4 self-assemble into two-dimensional (2-D) oblique columnar structures in the liquid crystalline phase, in addition, on heating, molecule 1 transforms from the oblique columnar phase to the nematic phase.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Efficient and regioselective chromium(0)-catalyzed reaction of 2-substituted furans with diazo compounds: stereoselective synthesis of (2E,4Z)-2-aryl-hexadienedioic acid diesters

Pentacarbonyl(η²-cis-cyclooctene)chromium(0) (1) catalyzes efficiently reactions of diazo compounds with electron-rich furans. The reaction of 2-methoxyfuran (2) with alkyl α-diazoarylacetate (3a-g) furnishes the (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g) in excellent yields. These reactions are highly regioselective. The cyclopropanation intermediates formed from 1 and diazo compounds 3a-g always arise from a carbene addition to the less substituted CC bond of 2. The resulting cyclopropanation product undergoes a ring opening reaction to form the corresponding (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g). The pentacarbonylchromium(0)-catalyzed reactions of 2-alkylfuran (5a-b) with ethyl α-diazophenylacetate (3a) and 9-diazo-9H-fluorene (3h) produce the 1(E),3(E)-butadienes (6a-d) in very good yields.     

Highly efficient synthesis of extended triptycenes via Diels-Alder cycloaddition in water under microwave radiation

Microwave-irradiated Diels-Alder reactions of anthracene and endoxides (6a-g) in water afforded the cycloadducts (8a-g) with high efficiencies. The extended triptycenes (2a-g) were readily obtained by dehydration of 8a-g in a mixture of AcOH and Ac₂O with good overall yields.     

Nucleophilic fluorination of amino alcohols and diols using Deoxofluor

Various fluorinated chiral compounds were synthesized using bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor) as a nucleophilic fluorinating reagent. Reactions of Deoxofluor (1) with amino alcohols (2a-d) and diols (2e-g) in methylene chloride at room temperature led to the formation of the corresponding fluoro derivatives (3a-g) in good yields.     

An efficient substituent dependent synthesis of congested pyridines and pyrimidines

An efficient and versatile synthesis of various congested pyridines 3a-h, 6a,b, 8a-n, 10a-g, and 16a,b, and (pyrimidin-4-yl)acetonitriles 13a-g has been delineated by base catalyzed ring transformation of suitably functionalized 2H-pyran-2-ones 1a-h, 5, 7, and 15 by formamidine acetate 2a, acetamidine hydrochloride 2b, S-methylisothiourea 9a, pyrazol-1-yl-carboxamidine 9b, and arylamidine hydrochloride 12 separately in the presence of powdered KOH in dry DMF.     

Synthetic studies of 3-(3-fluorooxindol-3-yl)-l-alanine

Oxidative fluorination of several protected tryptophans 8b-g with Selectfluor™ proceeded smoothly in aqueous media to give a diastereomeric mixture of the corresponding 3-fluorooxindoles 9b-g. Attempted deprotection of the 3-fluorooxindoles 9b-g under various conditions did not afford 3-(3-fluorooxindol-3-yl)-l-alanine (6). Reaction of the suitably protected tryptophan derivative 16 with Selectfluor™ produced the fluorinated product 17. Simultaneous cleavage of all protective groups of 17 under acidic conditions successfully gave the target compound 6 in excellent yield.     

New synthesis of 3-arylpyrrolines

We present an easy and straightforward synthesis of 3-arylpyrrolines 4a-g by repeated treatment of 4-aryl-1,2,5,6-tetrahydropyridines 2a-g with m-chloroperoxybenzoic acid (MCPBA) and boron trifluoride etherate (BF₃-OEt₂). The transformation proceeds via epoxidation, ring contraction, Baeyer-Villiger oxidation and elimination reaction and affords 3-arylpyrrolines 4a-g with 61-70% yield. This facile strategy was also used to synthesize racemic baclofen (6).     

Substituted coumarin amidines: useful building blocks for the preparation of [1]benzopyrano[4,3-b]pyridin-5-one and [1]benzopyrano[4,3-d]pyrimidin-5-one derivatives

The synthesis of [1]benzopyrano[4,3-b]pyridin-5-ones 4a-f and 4g-j starting from 3-formylcoumarin and 3-cyanocoumarin N-functionalized amidines 3a-f and 3g-j, respectively, was reported. The ring-closure reaction mechanism, under basic or acidic media, was proposed. Furthermore, the reaction of 3-formylamidines 3a,c-f with ammonium acetate gave good yields of 2-substituted [1]benzopyrano[4,3-d]pyrimidin-5-ones 7.     

Synthesis and characterization of α,ω-disubstituted quaterthiophenes functionalized with polar groups for solution processed OTFTs

A series of soluble quaterthiophenes (4Ta-g) bearing ester groups in the α,ω-terminal positions separated from the quaterthiophene core by ethylene (4Ta-c), vinylene (4Td-f) or ethynylene (4Tg) spacers was synthesized by means of a Pd-catalyzed homocoupling of bithiophenes proceeding via C-H bond activation. The synthetic approach gave satisfying yields of 4Ta-f but resulted in only 3% yield of 4Tg due to the competitive hydrofluorination of the triple bond. The quaterthiophenes 4Ta-g were characterized by NMR, FTIR, UV-vis, PL spectroscopies, HRMS, TGA and CV. Thin-films of 4Ta-g were deposited either by spin-coating or by thermal evaporation on Si/SiO₂ for the fabrication of top-contact OTFTs. The devices prepared using 4Ta-c bearing the ester functional group separated from the quaterthiophene core by an ethylene spacer showed average hole field-effect mobility up to 2.7×10⁻³ cm² V⁻¹ s⁻¹ and up to 6×10⁻³ cm² V⁻¹ s⁻¹ for solution processed and for thermally evaporated OTFTs, respectively. The remarkably high solubility of 4Ta-c, along with their respectable performances in OTFTs render these molecules promising for practical applications as active layers in chemically-sensitive devices.     

Chiral biomimetic NADH models in the benzo[b]-1,6-naphthyridine series. A novel class of stable, reactive and highly enantioselective NADH mimics

The preparation of a new class of tricyclic models 1 based on a Friedländer reaction between chiral piperidine-2,4-diones 2 and azomethine 3 is reported. Alkylation of the lactam allowed to install various pendant arms on the chiral cyclic inducer. The so-obtained mimics 1a,d,f,g,h,k were involved in the reduction of methyl benzoylformate to furnish methyl mandelate in 4-87% ee (R). The presence of a coordinating pendant arm proved to be essential to reach optimum results in terms of enantioinduction. Asymmetric reduction of 2-benzoylpyridine with mimics 1d,f,g produced α-phenyl-2-pyridinemethanol in 30-84% ee (R).     

The acid-mediated intramolecular 1,3-dipolar cycloaddition of derived 2-nitro-1,1-ethenediamines for the synthesis of novel fused bicyclic isoxazoles

The discovery of a novel synthesis of new fused bicyclic isoxazoles, for example, N-methyl-3-phenyl-5,6-dihydro-4H-isoxazolo[3,4-c]azepin-8-amine (2a), N-methyl-3-phenyl-4,5-dihydroisoxazolo[3,4-c]pyridin-7-amine (2b) and N-methyl-3-phenyl-4H-pyrrolo[3,4-c]isoxazol-6-amine (2d) in high yield is reported. We speculate that the reaction proceeds via acid-mediated intramolecular 1,3-dipolar cycloaddition from 2-nitro-1,1-ethenediamines 1a,b,d.