静电纺丝制备荧光导电双功能复合纳米纤维及其表征

采用静电纺丝技术将导电聚苯胺(PANI)和铕/铽稀土配合物掺杂到高分子基质聚乙烯吡咯烷酮(PVP)中,制备出荧光导电复合纳米纤维。用扫描电镜(SEM)、荧光光谱仪(FL)、宽频介电松驰谱仪对荧光导电复合纳米纤维的性能进行分析,结果显示,在270nm紫外光激发下,铕系列与铽系列复合纳米纤维分别发出红光和绿光。同时,复合纳米纤维的电导率可以达到1.18×10~(-6) S/cm,两种复合纳米纤维同时具有优异的荧光性能及良好的导电功能。     

血红蛋白生物催化合成导电聚苯胺

利用血红蛋白在十二烷基磺酸钠阴离子表面活性剂胶束体系中生物催化合成水溶性导电聚苯胺/十二烷基磺酸复合物(PANI/SDS), 讨论了不同反应体系及溶液pH值对聚合反应产物的影响. 结果表明该反应具有明显的pH值依赖性, pH (1.0～4.0)是合成导电聚苯胺所必需的, 其最适pH值为3.0, 聚苯胺由导电的翠绿亚胺盐转变为本征态发生在pH 10.4. 用元素分析法、紫外-可见分光光度法、FT-IR、循环伏安法、粘度测试、电导率测试、热重分析法等对PANI/SDS复合物表征, 结果表明该复合物具有较好的热稳定性和可逆的电化学活性.     

静电纺丝法制备聚丙烯腈/聚苯胺复合纳米纤维及其表征

利用静电纺丝技术,以聚丙烯腈(PAN)和苯胺(ANI)为前驱物,用过硫酸胺(APS)溶液在低温下缓慢氧化聚合,制备了PAN/PANI复合纳米纤维,直径约500 nm.通过扫描电子显微镜(SEM)、红外光谱(FTIR)、X射线衍射(XRD)和激光拉曼(RAMAN)光谱仪等测试手段对材料的形貌和结构进行了表征.探讨了材料制备过程中影响纤维形貌、尺寸、均匀度的因素和PANI含量对复合纤维导电性能的影响,结果表明,PAN浓度、ANI的加入量和电压是影响纤维特性的主要因素;PANI在PAN基体中呈纳米尺寸分布,复合纳米纤维具有良好的导电性能,导电率可达10-2S/cm.     

Synthesis of polyaniline/Q-CdSe composite via ultrasonically assisted dynamic inverse emulsion polymerization

In this communication, polyaniline/CdSe quantum dots (PANI/Q-CdSe) composite was successfully synthesized via in situ ultrasonically assisted dynamic inverse emulsion polymerization. The synthesized PANI-coated Q-CdSe composite was characterized by field emission transmission electron microscopy showed that the CdSe quantum dots have an average size of around ca. 5 nm were dispersed in the PANI matrix. X-ray diffraction, Fourier transform infrared spectrum (FT-IR) and UV-visible spectrum were used to characterize the structure of the obtained PANI/Q-CdSe composite. FT-IR spectra indicated that the polymer was highly doped and existed in conducting emeraldine salt form. The obtained PANI/Q-CdSe composite showed significant improvement in the thermal behavior as indicated by TGA thermograph. The presented dynamic polymerization process is very fast and produces stable colloidal dispersion. This approach provides a one-step, simple, general, and inexpensive method for the preparation of PANI/Q-CdSe composite.     

Improved electrorheological effect in polyaniline nanocomposite suspensions

We prepared polyaniline (PANI)/clay composites that are composed of both PANI-clay nanocomposite particles and pure PANI particles. The PANI-clay nanocomposite particles were made during the polymerization process, wherein PANI particles are attached on the surface of exfoliated clay particles modified by an aminosilane group. The PANI/clay composites were used as electrorheological fluids (ERFs) by dispersing them in silicon oil. The PANI-clay nanocomposite particles, which can form columnar structure under an electric field, strongly enhance the mechanical rigidity of the suspensions. The maximum yield stress of the PANI/clay composite suspensions (15 wt% in silicon oil) was 1.6 kPa at 3 kV/mm, while that of pure PANI was 300 Pa at the same electric field. A mechanism to explain the yield behaviors of the PANI-based nanocomposite suspensions is proposed.     

Nanoscale measurements of conducting domains and current-voltage characteristics of chemically deposited polyaniline films

Spatial variations in electric conductivity and evolutions of band structures of polyaniline (PANI) films have been studied by use of a so-called current-sensing atomic force microscope (CS-AFM) or atomic force microscope current image tunneling spectroscopy (AFM-CITS). PANI films were deposited chemically onto indium-tin oxide- (ITO-) glass substrates, and their thickness and doping levels were controlled by polymerization and acid-doping conditions. The conducting uniformity of the PANI films depends on their doping level and thickness. Conducting domains were observed in fully doped PANI film, even when the bias voltage was reduced to as small as 30 mV. High current flowing regions gradually disappeared when conducting PANI films were partially dedoped. The point-contact current-voltage (I-V) characteristics of conducting tip-polymer/ITO systems were investigated on PANI films with different thickness and degree of doping. Various types of I-V curves representing metallic, semiconducting, and insulating states were obtained depending on the aggregation of polymer chains and doping level of the polymer film. The band gap energies (estimated from the I-V or dI/dV-V curves) of emeraldine base (EB) (undoped polyaniline) films are all higher than 3.8 eV, and a wide distribution of the band gap energies (0-1.1 eV and 0.75-1.8 eV for fully and partially doped PANI thin films, respectively) was found in a single polymer film.     

静电纺丝制备Eu(BA)3phen/PANI/PVP光电双功能复合纳米纤维及其性能

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物Eu(BA)3phen掺杂到高分子材料聚乙烯吡咯烷酮(PVP)中, 制备出新型的具有光电双功能的Eu(BA)3phen/PANI/PVP复合纳米纤维. 采用扫描电子显微镜、 X射线能量色散谱仪、 荧光光谱仪及宽频介电松弛谱仪对样品进行了表征. 实验结果表明, 复合纳米纤维直径为(270±31) nm. 在275 nm紫外光激发下, Eu(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于580, 594和617 nm的红光, 对应于Eu3+的 5D0→7F0, 5D0→7F1和5D0→7F2跃迁. 当m[Eu(BA)3phen]:m(PANI):m(PVP)=15:10:100 时, 复合纳米纤维的荧光发射最强. 复合纤维的电导率随PANI含量的增大而升高. 在m(PANI):m(PVP)=50:100时, 其电导率在高频(106 Hz)下达到1.5×10-6 S/cm.     

Synthesis and characterization of single‐wall‐carbon‐nanotube‐doped emeraldine salt and base polyaniline nanocomposites

Nanocomposites of polyaniline (PANI) and single‐wall carbon nanotubes (SWNTs) were prepared and characterized via resonance Raman and electronic absorption spectroscopy (ultraviolet–visible/near‐infrared). The chemical synthesis of PANI was performed in the presence of SWNTs in concentrations ranging from 10 to 50 wt % (SWNT/PANI). The obtained materials were hydrophilic, homogeneous composite compounds. The chemical interaction between PANI (in the conducting emeraldine salt form and in the insulating emeraldine base form) and metallic and semiconducting nanotubes was investigated. The emeraldine salt form of the polymer was significantly stabilized in the composite in comparison with plain PANI. A selective electronic interaction process between PANI and metallic SWNTs was found. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 815–822, 2005     

Enzymatically Synthesized Conducting Polyaniline Nanocomposites: A Solid‐State NMR Study

Abstract

The chiral conducting polyaniline (PANI) nanocomposites [polyacrylic acid/polyaniline/(?) camphorsulphonic acid (CSA)] were synthesized using enzyme, horseradish peroxidase (HRP) in the aqueous buffer solution at pH 4.3. It appears that the enzyme HRP apart being a biocatalyst, plays an important role during the polymerization, which allows PANI to prefer a specific helical conformation whether the induced chirality in the monomer‐CSA complex is either by (+)CSA or (?)CSA. In this paper, we report, the structural characterization of these nanocomposites by solid‐state ¹³C cross‐polarization with magic angle spinning (CP/MAS) NMR techniques. The structural features of PANI in the conducting form of nanocomposite (as‐synthesized) are similar to that of enzymatically and chemically synthesized PANI. Preliminary data also suggest that some portion of nanocomposite samples are not completely doped. Dedoping of as‐synthesized PANI nanocomposite with aqueous NH₄OH shows the spectral features that of the emeraldine base form. Solid‐state ¹³C NMR data suggest that it is possible to detach PAA and CSA from PANI in the nanocomposite material.     

浸润性可调的导电聚苯胺/聚丙烯腈同轴纳米纤维

聚苯胺(PANI)因其具有可调的导电性、优异的化学稳定性、简单的制备方法等特点, 在化学电源、抗静电涂层、电磁屏蔽材料、抗腐蚀、传感器等领域具有广泛的应用前景[^1~4]. 由于聚苯胺的刚性分子链使得聚苯胺几乎不溶不熔, 难以加工应用, 因此, 将导电聚合物直接制成纳米纤维一直是合成纤维界所希望的目标之一. 此外, 由于材料尺度的减小, 使纳米材料的表面与界面性质,尤其是表面浸润性变得更为突出.浸润性是固体表面的重要特征之一, 它主要由表面的化学组成和微观结构共同决定^[5,6]. 可调的浸润性在超疏水材料、药物传输、仿生材料和微流体等领域具有重要的应用价值^[7~10] , 引起人们广泛关注.     

静电纺丝技术制备Tb（BA）3phen/PANI/PVP光电双功能复合纳米纤维

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物[Tb(BA)3phen]掺杂到高分子材料(PVP)中,制备出一类新型的具有光电双功能的Tb(BA)3phen/PANI/PVP复合纳米纤维.用扫描电子显微镜(SEM)、X射线能量色散谱仪(EDS)、荧光光谱仪及宽频介电松弛谱仪对样品进行了表征.结果表明,复合纳米纤维直径为(331±43)nm.在276 nm紫外光激发下,Tb(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于491,547和585 nm的绿光,对应Tb3+的5D4→7F6,5D4→7F5和5D4→7F4跃迁.当Tb(BA)3phen∶PANI∶PVP的质量比为15∶10∶100时,复合纳米纤维的荧光发射最强,其电导率随PANI含量的增大而升高,在PANI∶PVP为50%(wt%)时,其电导率在高频(106Hz)下达1.531×10-6S/cm.     

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Camphor‐10‐sulfonic acid (HCSA) doped polyaniline (PANI)/poly(ethylene oxide) (PEO) composite nanofibers with different compositions (12 to 52 wt.% of PANI) were synthesized by an electrospinning method and their properties including optical, electrical and sensing were systematically investigated. FT‐IR shows that an increase of IR absorbance ratios of aromatic C? C stretching vibration of benzenoid rings of PANI to C? O? C symmetric vibrational modes of PEO confirmed that the PANI content in nanofiber mats increased proportionally with increase in PANI content in electrospinning solution. The band gap of PANI was determined to be 2.5 eV using UV‐Vis spectroscopy. The electrical conductivities of the nanofibers increased with an increase in the PANI content in the nanofibers. Additionally, the sensitivity toward NH₃ increased as the PANI content increased, but branched nanofibers reduced sensing response. The humidity sensitivity changed from positive to negative as the PANI content increased. The electron transport mechanism was studied by measuring the temperature dependence electrical resistivity. The negative temperature coefficient of resistance revealed a semiconducting behavior for the PANI/PEO nanofibers. The activation energy, calculated by Arrhenius plot, increased as the PANI content decreased. The power law indicated that electrons were being transported in a three dimensional matrix, and the longer hopping distance required more hopping energy for electron transport.     

自支撑石墨烯/聚苯胺纳米纤维薄膜的制备及其电化学电容行为

用真空抽滤氧化石墨（GO）与聚苯胺（PANI）纳米纤维的混合分散溶液,流动组装得到自支撑GO/PANI复合薄膜,再利用气态水合肼还原其中的GO,最后重新氧化和掺杂还原态PANI,制备了自支撑石墨烯（GN）/PANI薄膜.扫描电子显微镜（SEM）结果显示,GN/PANI薄膜为层状结构,且PANI纳米纤维均匀插层于GN片间.PANI纳米纤维在复合薄膜中的存在有效增大了GN之间的层间距,有利于电解液离也GN充分接触.GN的高电导性则有利于PANI氧化还原过程中的电荷传输.电化学测试表明,GN/PANI薄膜在1 mol·L^-1HCl电解液中具有良好的电化学电容性能,在0.1 A·g^-1的电流密度下的比容量为495 F·g^-1,在3A·g^-1时为313 F·g^-1.经过2000次连续充放电,其具有90%的电容保持率,表明该复合材料具有良好的电化学稳定性.     

Preparation and characterization of polyaniline-containing Na-AlMCM-41 as composite material with semiconductor behavior

Composite material formed from a mesoporous aluminosilicate, Na-AlMCM-41, with conducting polyaniline (PANI) has been synthesized by an in situ polymerization technique. Studies of aniline adsorption over mesoporous Na-AlMCM-41 synthesized in our laboratory allowed us to find the modes in which aniline interacts with the active sites of Na-AlMCM-41. In order to obtain the best reaction conditions to polymerize aniline onto Na-AlMCM-41, aniline was first polymerized to produce pure PANI. Hence, the oxidative in situ polymerization was carried out by two procedures, differing in the polymerization time and in static or stirring conditions. Studies of infrared spectroscopy and UV-vis spectroscopy indicated that higher polymerization time and static conditions allowed us to obtain mainly polyaniline in emeraldine form on the host. The N(2) isotherm of the polyaniline/Na-AlMCM-41 composite (PANI/MCM) indicated that the shape was similar to that of MCM, but the shift to saturation transition to lower partial pressure shows that the channels are occupied by PANI and they are now narrowed. The thermal properties of PANI, Na-AlMCM-41, and composite were investigated by TGA analyses and we found that the polymer shows higher thermal stability when it is forming the composite. Scanning electron microscopy indicated that PANI is not on the outer surface of the host. Conductivity studies show that PANI/Na-AlMCM-41 exhibits semiconductor behavior at room temperature and its conductivity was 7.0 x 10(-5) S/cm, smaller than that of pure polyaniline. PANI/Na-AlMCM-41 conductivity shows an increase as temperature increases. Magnetic measurements at room temperature confirmed that the composite has paramagnetic behavior; at lower temperatures the composite became diamagnetic.     

Synthesis and Characterization of Self-Assembled V2O5 Mesostructures Intercalated by Polyaniline

A new nanocomposite of vanadium pentoxide (V2O5) and polyaniline (PANI) were synthesized by in situ oxidative polymerization/intercalation on V2O5 powder at room temperature. The reaction was facile and topotactic, forming polyaniline as the emeraldine salt. It was indicated that V2O5 itself can catalyze the oxidative polymerization of aniline and that layered structure could make aniline intercalate into the V2O5 framework. It makes the in situ polymerization feasible to occur in the layer of V2O5 structure. XRD results showed PANI/V2O5 nanocomposite possessed lamellar mesostructure, which was determined by an X-ray diffraction peak at 6.5° and SEM photograph. And FT-IR spectrum suggested that there was interaction between PANI and V2O5. The hybrid had better thermal stability in N2 and air ambience.     

Chromatic changes in the blends of electroactive polymers with comb-shaped flexible polymers

The effect of blending of alkylated polymers, which have different backbone structures, was investigated in order to improve the electronic properties of conducting polymers. Comb-shaped flexible polymer, poly(octadecyl acrylate) (PODA), was blended with rigid alkylated conducting polymers, poly(3-dodecyl-thiophene)(PDDT), and polyaniline emeraldine base (PANI)/p-dodecyl-benzenesulfonic acid (DBSA) complex, respectively, to investigate the effect of long alkyl chain of flexible polymer on the conformational mode change of rigid backbones and the effect of intermolecular interaction between these alkylated polymers. Optical microscopy was applied to observe the morphology change and obtain the phase diagrams of these blends. The intermolecular interactions that occurred in these blends were explained for each different characteristic peak obtained with FT-IR spectra. Solvatochromism (red-shift) of PDDT/PODA binary blends in solid state due to the planarity change of rigid backbone in the presence of PODA and electrochromism of PANI(DBSA)₄/PODA ternary blends due to the hydrogen bonding between the nitrogen cation of PANI complex and carbonyl group of PODA are observed in UV-Vis-NIR spectra. Interestingly, the increase of conductivity was observed in the presence of 5 wt% of PODA in PDDT/PODA binary blends and a homogeneous smectic liquid crystalline structure was clearly confirmed by cross polarized optical microscopy in PANI(DBSA)₄/PODA ternary blends.     

Fabricating and Tailoring Polyaniline (PANI) Nanofibers with High Aspect Ratio in a Low‐Acid Environment in a Magnetic Field

In a 0.010 m HCl solution, we successfully transformed irregular polyaniline (PANI) agglomerates into uniform PANI nanofibers with a diameter of 46–145 nm and a characteristic length on the order of several microns by the addition of superparamagnetic Fe₃O₄ microspheres in a magnetic field. The PANI morphological evolution showed that the PANI nanofibers stemmed from the PANI coating shell synthesized on the surface of the Fe₃O₄ microsphere chains. It was found that the magnetic field could optimize the PANI nanofibers with a narrow diameter size distribution, and effectively suppressed secondary growth. When compared with other microspheres (like silica and polystyrene), only the use of superparamagnetic Fe₃O₄ microspheres resulted in the appearance of PANI nanofibers. Attempts to form these high‐quality PANI nanofibers in other concentrations of HCl solution were unsuccessful. This deficiency was largely attributed to the inappropriate quantity of aniline cations.     

DNA-directed assembly of polyanilines: modified cytosine nucleotides transfer sequence programmability to a conjoined polymer

A series of polyaniline (PANI) oligomers was constructed from monomer units covalently linked to duplex DNA through N-(2-aminoethyl) groups bonded through cytosines. DNA oligomers containing the aniline monomers were treated with horseradish peroxidase (HRP) and H2O2 under conditions known to cause polymerization of aniline. No change in the absorption spectrum of the DNA was observed for samples containing fewer than four contiguous aniline groups. However, for oligomers containing four, five, or six aniline units, treatment with HRP and H2O2 led to the appearance of absorption features characteristic of the conducting "proton doped" emeraldine oxidation state of PANI. Molecular modeling shows that the DNA is distorted in the region of the PANI, but flanking regions of the DNA maintain their B-form structure. These findings provide a method to exploit the self-recognition, self-assembly, and sequence programmability of DNA for the formation of conducting polymers.     

Preparation and characterization of composites that contain small carbon nano-onions and conducting polyaniline

Small multilayer fullerenes, also known as carbon nano-onions (CNOs; 5-6 nm in diameter, 6-8 shells), show higher reactivity than other larger carbon nanostructures. Here we report the first example of an in situ polymerization of aniline on phenyleneamine-terminated CNO surfaces. The green, protonated, conducting emeraldine polyaniline (PANI) was directly synthesized on the surface of the CNO. The functionalized and soluble CNO/PANI composites were characterized by TEM, SEM, DSC, Raman, and infrared spectroscopy. The electrochemical properties of the conducting CNO/PANI films were also investigated. In comparison with pristine CNOs, functionalized carbon nanostructures show dramatically improved solubility in protic solvents, thus enabling their easy processing for coatings, nanocomposites, and biomedical applications.     

Effect of methanol on morphology of polyaniline

Constant potential method is used to synthesize polyaniline (PANI) nanofibers in a solution containing methanol. According to shaping theory, the reasons about forming polyaniline nanofibers were suggested. The effects of the synthesis parameters, such as monomer concentration, methanol concentration, HCl concentration, electrode potential, polymerization time, and reaction temperature on the morphology of the PANI films have been investigated. Scanning electron microscopy results was used to characterize the morphology of PANI nanofibers. Both UV-vis absorption spectra and FTIR spectra indicate that there exists interaction between methanol molecules and polyaniline chains.