沸石咪唑酯骨架-67高效催化L-丙交酯的开环聚合反应

为了探究沸石咪唑酯骨架材料(Zeolitic Imidazolate Frameworks,ZIFs)结构中的金属单元对其催化活性的影响,我们采用室温法合成了ZIF-8、Zn/Co-ZIF和ZIF-67,并用其催化L-丙交酯的本体开环聚合反应。 在相同的反应条件下,ZIF-67具有最高的催化活性。 与2-甲基咪唑(配体)作为催化剂相比,ZIF-67催化得到的聚乳酸具有高度全同立构结构。 此外,基质辅助激光解吸-飞行时间(MALDI-TOF)质谱表明,ZIF-67催化得到的聚乳酸主要为线状结构。 经过3次循环反应后,ZIF-67的催化活性没有明显降低。     

乙酸促进邻甲基苯磺酸铜选择性催化醇和酚的四氢吡喃化反应

室温无溶剂条件下, 乙酸能有效促进邻甲基苯磺酸铜催化一系列醇或酚和3,4-2H-二氢吡喃反应, 生成相应的四氢吡喃醚. 在乙酸存在条件下, 体系的催化性能有显著提高, 邻甲基苯磺酸铜用量仅需0.3 mol%(占醇或酚的摩尔分数)就能使反应在较短时间内完成. 反应结束后, 邻甲基苯磺酸铜经简单相分离可多次重复使用, 催化活性无明显下降. 产物结构经IR, 1H NMR, 元素分析进行表征.     

Studies on Manganese Peroxidase Immobilized in Gelatin-containing Microemulsion-based Gels

The immobilized technique of manganese peroxidase (MnP) in gelatin-containing microemulsion-based gels and the effects of storage time and reuse times on its catalytic activity were studied. The results show that the MnP immobilized together with Mn^2 and H2O2 could effectively oxidize syringaldazine in n-heptane. The immobilized MnP still had a high catalytic activity after one-month storage under a freezing condition. The reuse times have a relation to the amount of the immobilized H2O2. When the amount of the immobilized H2O2 is sufficient, the microemulsion-based gels containing MnP could be used many times.     

Intercalation of copper salt to montmorillonite K-10 and its application as a reusable catalyst for Chan–Lam cross-coupling reaction

A simple and efficient catalytic system has been developed by adsorption of copper salt in the interlayers of montmorillonite K-10. The catalytic system impressively exercises the green chemistry perspective leading to effortless recovery and recyclability for the cross-coupling of arylboronic acids and N-nucleophiles. The effect of catalytic activity was studied for electronically diverse arylboronic acids and imidazoles relying on various optimizations under optimum thermal condition. The catalytic system was characterized and the morphology was determined.     

高活性Ni/HY催化剂加氢催化合成苯胺类化合物的研究

采用浸渍沉淀法制备Ni/HY催化剂,用BET、XRD、TEM、TPR等方法对其进行表征,并将其应用于硝基化合物液相加氢合成苯胺类化合物反应中.结果表明,Ni/HY催化剂具有较高的催化活性,在温和的反应条件下,反应0.5 h后,硝基化合物的转化率和苯胺类化合物的选择性均高达99.0%以上.该催化剂能储存于150℃以下的空气气氛中,活性组分分散度高,且具有良好的磁分离性能.     

铌酸催化液相合成乙酸乙酯

报道了铌酸催化乙醇与乙酸的液相酯化反应考察了反应温度、催化剂用量、酸醇比、反应时间对产品乙酸乙酯经的影响。在优化条件下,产品收率棕达８８．０％,选择性为１００％,同时我们采用自制间式反应,对催化剂的稳定性进行了考察,发现铌酸在该实验条件下,能保持较高的稳定性和较高的催化活性。     

PREPARATION AND CATALYTIC BEHAVIOUR OF POLYMER-BOUND METALLOPORPHYRIN IN HYDROGENATION OF OLEFIN

The meso- tetraarylporphyrin has been anchored to styrene- divinylbenzenecopolymers by reaction of meso- tetra (4-hydroxylphenyl ) porphyrin with chloromethylatedresin under mild condition. A number of polymer transition metal complexes have beenprepared with the polymer ligand and metal salts. The polymeric ligand and its complexeshave been characterized by electronic spectra, and vibrational spectra. Cyclohexene can behydrogenated with the polymeric porphyrin palladium complex(P-THPPPd) as catalyst,and its catalytic activity was influenced by the polarity of solvents, the contents of water inethanol or reaction temperature. However, its catalytic activity was lower for nitro groups,carbonyl groups and olefins with steric hindrance substituents, and showed no activity foraromatic rings under these conditions.     

β‐Cyclodextrin Immobilized onto Dowex Resin: A Unique Microvessel and Heterogeneous Catalyst in Nucleophilic Substitution Reactions

The catalytic activity of β‐cyclodextrin immobilized on Dowex resin as an efficient solid‐liquid phase transfer catalyst was developed for the synthesis of alkyl thiocyanates and phenacyl derivatives in water. The nucleophilic substitution reactions were performed under mild reaction condition and gave the products in excellent yields. Furthermore, the catalyst could be recycled by facile separation without any loss of activity.     

Cross-coupling reactions catalyzed by P, O chelate palladium complexes at room temperature

A new catalytic system based on P, O chelate palladium complexes for cross-coupling reactions is described. These catalysts have all shown high activity and selectivity under mild reaction condition.     

Xylan-type hemicelluloses supported terpyridine–palladium(II) complex as an efficient and recyclable catalyst for Suzuki–Miyaura reaction

Xylan-type hemicelluloses supported terpyridine–palladium(II) as a novel biomass-supported catalyst was synthesized and characterized in terms of morphology, composition, and thermal stability. The nano-Pd catalyst was further explored for Suzuki–Miyaura reaction between arylboronic acid and aryl halide under aerobic condition, with a yield up to 98 %. In particular, the catalyst exhibited both high catalytic activity and stability for Suzuki–Miyaura reaction. Furthermore, the catalyst could be easily recovered by simple filtration and reused at least six times without significant loss of its catalytic activity. This work provides a novel and effective supported catalyst, and broadens the applications of polysaccharides in green catalysis.     

三丁胺胺化强碱性阴离子交换树脂催化合成苄叉丙酮

以用组合化学方法筛选出的在有外加碱条件下的亲核取代催化活性最高的聚合物季铵盐-大孔型苯乙烯系三丁胺胺化强碱性阴离子交换树脂为相转移催化剂,催化合成苄叉丙酮,考察了各种反应条件对苄叉丙酮收率的影响,在优化反应条件下,苄叉丙酮的收率高达98%,且催化剂可重复使用。     

Study on One‐pot Biginelli‐like Synthesis of Pyrazolo[3,4‐d]pyrimidines in Bronsted Acidic Ionic Liquid Under Sonication and its Mechanism

Pyrazolo[3,4‐d]pyrimidine derivatives were synthesized using ionic liquid, 1‐butylimidazolium tetrafluoroborate, under ultrasound irradiation at ambient condition without any added catalyst. Mechanistic pathway based on the catalytic role of ionic liquid has been proposed. This method offers the advantages of simple procedure, milder reaction condition, easier workup and improved yield over the conventional method. The ionic liquid could be recycled at least three times with marked retention in its activity.     

Catalysis of N‐Methylaniline‐Blocked Polyisocyanate‐Hydroxyl‐Terminated Polybutadiene Cure Reaction

Catalysis of cure reaction between N‐methylaniline‐blocked polyisocyanate and hydroxyl‐terminated polybutadiene was investigated using a variety of tertiary amine and organotin catalysts. The catalytic activity of amine and organotin compounds was determined from the cure‐time results. It was found that the activity of the catalyst depends upon the steric constrain around the catalytic center. The organotin compounds showed higher catalytic activity than the amine catalysts. FTIR results obtained under isothermal condition revealed that DABCO selectively catalyze the urethane formation reaction, whereas DBTDL catalyze both the allophanate formation and urethane formation reactions during curing process. The synergistic effect of amine and organotin mixed catalysts on the cure reaction was also investigated.     

功能化酸性离子液体催化甲醛与烯烃的Prins缩合反应

研究了以功能化酸性离子液体为催化剂,甲醛与烯烃Prins缩合反应生成1,3-二噁烷及其衍生物,水解得到1,3-二元醇.对不同结构的离子液体、催化剂用量和反应条件进行了考察.结果表明,该体系具有良好的催化性能,反应可在较温和的条件下进行,实现了高活性和高选择性的目标.产物易分离,催化剂重复使用6次,其催化活性基本不变.     

An efficient Ag/MIL-100(Fe) catalyst for photothermal conversion of CO2 at ambient temperature

The conversion of CO₂ under mild condition is of great importance because these reactions involving CO₂ can not only produce value-added chemicals from abundant and inexpensive CO₂ feedstock but also close the carbon cycle. However, the chemical inertness of CO₂ requires the development of high-performance catalysts. Herein, Ag nanoparticles/MIL-100(Fe) composites were synthesized by simple impregnation-reduction method and employed as catalysts for the photothermal carboxylation of terminal alkynes with CO₂. MIL-100(Fe) could stabilize Ag nanoparticles and prevent them from aggregation during catalytic process. Taking the advantages of photothermal effects and catalytic activities of both Ag nanoparticles and MIL-100(Fe), various aromatic alkynes could be converted to corresponding carboxylic acid products (86%–92% yields) with 1 atm CO₂ at room temperature under visible light irradiation when using Ag nanoparticles/MIL-100(Fe) as photothermal catalysts. The catalysts also showed good recyclability with almost no loss of catalytic activity for three consecutive runs. More importantly, the catalytic performance of Ag nanoparticles/MIL-100(Fe) under visible light irradiation at room temperature was comparable to that upon heating, showing that the light source could replace conventional heating method to drive the reaction. This work provided a promising strategy of utilizing solar energy for achieving efficient CO₂ conversion to value-added chemicals under mild condition.     

亚铁锌双金属氰化络合物固体催化剂催化合成生物柴油

Fe(Ⅱ)-Zn双金属氰化络合物固体催化剂用于一步催化酯交换和酯化反应制备生物柴油,具有易分离、流程简单,不受水毒性影响的优点。将水溶性金属氰化络合物亚铁氰化钾和金属化合物氯化锌反应,并结合有机配体叔丁醇制备了基于亚铁氰化锌的双金属氰化物络合物(DMC)。并研究了DMC固体催化剂催化菜籽油合成生物柴油过程中,助络合剂种类、催化剂用量、反应温度、醇油摩尔比、反应时间、体系中水和脂肪酸含量等因素对反应过程的影响。研究结果表明,在最佳实验条件下,甲酯产率最高可达98%。催化剂可循环使用,6次循环使用后回收率仍达93.45%,适宜工业化生产。     

置换反应制备Pd-Fe双金属催化剂及其催化加氢性能

以Fe(CO)5为前体采用超声法合成纳米Fe胶体粒子,通过Fe胶体与PdCl2发生金属置换反应制备出活性炭负载Pd-Fe双金属催化剂。研究了表面活性剂聚乙烯吡咯烷酮对制备负载型催化剂的影响。采用XRD、H2程序升温还原（H2-TPR）、TEM、EDX等表征手段对催化剂进行表征,以苯乙炔加氢反应为探针反应考察了Fe含量对于催化剂催化性能的影响。结果表明加氢催化活性较差的金属组分Fe在合适的比例下可以促进Pd基催化剂的加氢催化活性和选择性,然而,过多的Fe也会降低其催化活性。     

Pd(PPh3)2Cl2-CuCl2/AC催化乙醇氧化羰化合成碳酸二乙酯

采用浸渍法制备了乙醇直接气相氧化羰化合成碳酸二乙酯的负载型催化剂,并在连续流动固定床反应装置上评价了催化剂的反应活性,考察了催化剂活性组分、载体、活性组分负载量等因素对催化反应活性的影响。结果表明,活性炭是较好的载体,CuCl2是较好的铜盐前驱体,添加了Pd(PPh3)2Cl2的CuCl2/AC催化剂活性更高。当Cu负载量为9.0%,Pd负载量为0.5%时,催化剂的活性较好。在优化的催化剂制备条件下,乙醇的转化率超过30%,碳酸二乙酯（DEC）的选择性达到95%。     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对     

ZSM-5酸改性对甲醇芳构化性能的影响

利用硝酸、草酸和酒石酸溶液对ZSM-5分子筛进行改性,并采用XRD、SEM、NH₃-TPD、XRF、²⁷Al MAS NMR、吡啶吸附红外光谱和N₂吸附-脱附对ZSM-5分子筛结构、酸量、比表面积及孔体积等物化性质进行表征分析。在反应温度为422℃,甲醇质量空速为4.74 h^-1的条件下,考察了ZSM-5分子筛的催化活性。结果表明,采用不同酸改性ZSM-5分子筛,影响了分子筛的比表面积、酸性及孔体积,从而改变了催化剂的催化性能。在甲醇芳构化（MTA）反应中,酸改性后的分子筛表现出良好的催化活性,且草酸改性后的催化剂表现出较高的催化活性及选择性,反应8 h时,芳烃及BTX收率分别达到57.40%和39.40%。