Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

DFT and IR spectroscopic analysis of p-tert-butylthiacalix[4]arene

Vibrational analysis of p-tert-butylthiacalix[4]arene based on an experimental mid and far IR spectra is described here. Density functional calculations of a most stable cone conformer related to crystalline solid FT-IR spectra in the temperature range up to 180 degrees C as well spectra of dilute solution have been used to obtain a better understanding of conformational state and a hydrogen bonding of p-tert-butylthiacalix[4]arene. Complete assignments were made for experimental FT-IR spectra of the cone conformer. Heating (up to 180 degrees C) of crystalline p-tert-butylthiacalix[4]arene did not change both conformational and cooperative H-bonding state of its molecules. A temperature spectral effect seems to be due to some relaxation of crystal packing mostly viewed on the OH bands.     

Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Comparative study of calix[4]arene derivatives: implications for ligand design

The first comparative theoretical study of three parent calix[4]arene analogues (calix[4]arene, thiacalix[4]arene, and homooxacalix[4]arene) has been performed using molecular dynamic simulations and density functional theory (MPWB1K/6-311G^∗∗//B3LYP/6-311G^∗∗) methods. The theoretical observations herein including optimized geometry, polarity, and atomic charge data provide that homooxacalix[4]arene would offer more efficient platform for metal ion recognition compared to thiacalix[4]arene or calix[4]arene.     

N-硫脲基套索杯[4]冠醚与四硫脲基杯[4]芳烃的合成

控制反应物的物质的量比, 杯式对叔丁基杯[4]-1,3-二乙酸乙酯衍生物1与5或50倍二乙烯三胺反应, 分别得到杯[4]氮杂冠醚2和开链的氮杂杯[4]芳烃衍生物3. 化合物2和3进一步与异硫氰酸苯酯反应得到首例侧链含硫脲基的套索杯[4]氮杂冠醚4和含4个硫脲基的杯[4]芳烃衍生物5, 产率为92%和87%. 新化合物的结构与构象经元素分析、红外、质谱、核磁共振谱等表征证实.     

含噻二唑官能基的对叔丁基硫桥杯[4]芳烃衍生物的合成及结构

以对叔丁基硫桥杯[4]芳烃(1)为原料, 在碳酸钾存在下与碘甲烷反应, 生成1,3-二取代桥杯[4]芳烃(2), 其分别与1,2-二溴乙烷, 1,3-二溴丙烷在碳酸钾的存在下进行烷基化反应, 生成硫桥杯[4]芳烃衍生物3和4. 在氢氧化钠存在下,其与过量的含不同官能团的2-巯基-1,3,4-噻二唑反应, 生成下缘含1,3,4-噻二唑基的硫桥杯[4]芳烃衍生物5a, 5b, 6a和6b, 并通过了¹H NMR, ¹³C NMR, IR, MS和元素分析的确证. 同时, X射线分析确定了硫桥杯[4]芳烃3和5a的晶体结构.     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.     

The structure and thermodynamics of calix[n]arene complexes with dipyridines and phenanthroline in aqueous solution studied by microcalorimetry and NMR spectroscopy

The complex stability constants (K(S)) and thermodynamic parameters (DeltaH degrees and TDeltaS degrees) for 1:1 intermolecular complexation of three water-soluble calixarenes, that is, p-sulfonato calix[4]arene (C4AS), p-sulfonato thiacalix[4]arene (TCAS), and p-sulfonato calix[5]arene (C5AS), with dipyridines (4-DPD and 2-DPD) and 1,10-phenanthroline (Phen) have been determined by means of titration microcalorimetry in an acidic buffer solution (pH = 2.0) at 298.15 K, and their binding modes have been investigated by (1)H NMR and 2D ROESY NMR spectroscopy. The results obtained indicate that 4-DPD, 2-DPD, and Phen are included in the cavity of C5AS with the different patterns, this is, accumbent for 4-DPD, acclivitous for 2-DPD and Phen, while Phen is included upright in the cavity of C4AS. The K(S) values decrease with increasing cavity size of host molecules but enhance with extending conjugation degree of guest molecules, and thus C4AS exhibits an exceptionally high Phen/4-DPD selectivity of 22.5. Thermodynamically, the complexation of DPDs/Phen with the water-soluble calixarenes is obviously enthalpy-driven, but the molecular selectivity is mainly governed by the entropy term.     

苄连氮桥联双硫杂杯[4]芳烃的合成

硫杂杯[4]二醛基衍生物(1)在水合肼中肼解,合成了新化合物硫杂杯[4]二醛腙基衍生物(2);1和2在弱酸的催化下反应合成了新的具有对称结构的苄连氮双硫杂杯[4]芳烃(3);2和3的结构经1H NMR,IR,ESI-MS和元素分析表征.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Supramolecular interactions of [60]- and [70]fullerenes with calix[n]arenes

[60]- and [70]fullerenes have been shown to form 1:1 supramolecular complexes with (i) 24,26-dimethoxy-25,27-dihydroxy-5,11,17,23-tetra(4-tert-butyl)calix[4]arene (1) and (ii) 37,39,41-trimethoxy-38,40,42-trihydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2) in CCl(4) medium by absorption spectroscopy. Charge transfer absorption bands of the complexes have been located in each of the cases (except [70]fullerene-2 complex) studied from which the vertical ionisation potential of 1 has been obtained. Formation constants of the complexes have been determined at four different temperatures from which the enthalpies and entropies of formation of the complexes have been obtained. Moreover, the formation constant of [70]fullerene-2 complex is higher than that of the [60]fullerene-1 and [60]fullerene-2 complexes at all the four temperatures studied. This has been accounted in terms of greater cavity size of 2 which is a calix[6]arene compared to 1 which is a calix[4]arene and also by the fact that a high degree of preorganisation takes place in case of 2 through intramolecular H-bonding at its lower rim.     

Synthesis and Characterization of Boron Complex of Calix[4]arene

IthasbeenshownthatcalixarenescanperformselectiveiontranspoFtandformneutralcomplexeswithcanonsthroughprotonlossl.Olmsteadreported'thesynthesisandXraycrystalstructuresofTitanium(IV),Iron(ill)andCobalt(II)complexesofp-tertbutylcalix[4]areneandfoundthatacompleteexchangeofallfourOHgroupsinp-lertbutylcalix[4]arenetookplacewhentreatedwithTi(NMe=).togivethearyloxocomplex[{Ti(p-lerl-butylcalix[4]arene)},]'6whichmaybeformallydescribedasacentrosymmetrictitaniumaryloxidedimerconsistingoftwoTi(P-lerl…     

Synthesis and Electrochemical Behavior of Electroactive Bistetrathiafulvalene-attached Thiacalix[4]arene Assemblies

Tetrabromoalkylthiacalix[4]arenes(1a and 1b) reacted with excess bis(tetraethylammonium)-bis(1,3- dithiole-2-thione-4,5-dithiol)zincate(2) to give thiacalix[4]arene-thiones(3a and 3b) in the presence of Na₂S. Two novel bistetrathiafulvalene-attached thiacalix[4]arene assemblies(5a and 5b) formed via triethyl phosphite-mediated cross-coupling of thiacalix[4]arene-thiones(3a and 3b) and 4,5-biscyanoethylthio-1,3-dithiole-2-one(4). All the four new compounds were characterized by ¹H NMR, ¹³C NMR, IR, MS spectra and elemental analysis. Meanwhile, the structures of thiacalix[4]arene-thiones(3a and 3b) were identified by X-ray analysis. In addition, the cyclic voltammograms of the resulting thiacalix[4]arenes containing electroactive TTF units(5a and 5b) were provided.     

四硫脲基杯[4]芳烃衍生物的合成

对叔丁基杯[4]-1,3-二乙酸乙酯与过量的二乙基三胺反应,生成含有游离氨基的杯芳烃酰胺衍物(2),2再与异硫氰酸苯酯反应合成了含4个硫脲基的杯[4]芳烃衍生物,其结构经1H NMR,IR,MS和元素分析表征。     

含苯并噁唑基的硫桥杯[4]芳烃衍生物的合成及结构

在碳酸钾存在下, 对叔丁基硫桥杯[4]芳烃(1)分别与端基二溴代烷和碘甲烷反应, 生成硫桥杯[4]芳烃衍生物2～4. 含端基溴代的硫桥杯[4]芳烃衍生物2和4分别与2-巯基苯并噁唑在碳酸钾存在下反应, 生成硫桥杯[4]芳烃衍生物5a～5d. 通过1H NMR, 13C NMR, IR, MS和元素分析等手段对产物进行了表征. 同时, X射线分析确定了硫桥杯[4]芳烃5b的晶体结构.     

XPS,XES, and quantum chemical investigation of the electronic structure of thiacalix[4]arenes and calix[4]arene thioesters

The X-ray photoelectron and X-ray emission spectra as well as the charge state of thiacalix[4]arenes in the cone and 1,3-alternate conformations and calix[4]arene thioesters were studied. The donor ability of sulfur bridging atoms in the studied compounds was shown to be close to that in dialkyl sulfides. The internal X-ray transitions (K _α and K _β) were described by the energy of Kohn-Sham orbitals calculated by DFT method with relaxation corrections.     

Mechanism of hydrogen-bond array isomerization in tetrahydroxycalix[4]arene and tetrahydroxythiacalix[4]arene

Possible rearrangement mechanisms of hydrogen-bond arrays formed at the lower rim of tetrahydroxycalix[4]arene and tetrahydroxythiacalix[4]arene were studied by means of density functional theory and the resolution identity approximation modification of M?ller-Plesset perturbation theory (RI-MP2). Influence of solvent to height of energy barriers was quantified by use of the conductorlike screening model (COSMO) of implicit solvent (chloroform). Generally, two types of mechanisms were investigated. The first is represented by a synchronous single-step jump of all four hydroxyl protons. Pathways of the second mechanism include the rotation of one or more hydroxyl groups around the CAr-O bond. Theoretical results, in agreement with recently published experimental data (Lang et al. J. Chem. Phys. 2005, 122, 044056), prefer a jump mechanism for the methylene-bridged calix[4]arene. Concerning the thiacalix[4]arene, results obtained by COSMO as well as RI-MP2 calculations show that the rotational mechanism is very competitive and it could even be more favorable.     

Effect of varying bases on preferential crystallization of C-methylresorcin[4]arene and calix[6]arene

Preferential crystallization from a mixture of C-methylresorcin[4]arene (RsC1) and calix[6]arene (Calix6) in the presence of different bases has been investigated. In the presence of pyridine, a boat conformer of RsC1 crystallizes, whereas in the presence of triethylamine, Calix6 crystallizes in a symmetrically distorted conformation. The packing arrangements of the macrocycles show discrete solvent pockets for calixarenes and channels for resorcinarenes.     

Mn4-硫杂杯[4]芳烃单元的溶剂导向超分子组装

以去叔丁基硫杂杯[4]芳烃与Mn(II)为研究对象,通过改变体系溶剂分别得到了两个四核化合物Mn4(T4A)2 (1)和Mn4(T4A)2(DMF)2(2) (T4A = thiacalix[4]arene)。当反应溶剂为氯仿(CHCl3)和甲醇的混合溶剂时,形成的是以四核锰为结构单元的二维“笼目”(Kagomé)状超分子化合物1,而当反应溶剂为N,N-二甲基甲酰胺(DMF)和甲醇的混合溶剂时,得到的是格子状二维超分子互穿的三维结构化合物2。化合物1具有很大的溶剂占有空隙,是一个潜在的多孔材料,而化合物2是一个紧密堆积的拓展结构。