Validation study of a lateral-flow immunoassay for detection of ruminant by-product material in animal feeds and feed ingredients

An immunoassay with a lateral flow format has been developed for the detection of ruminant by-product material in animal feeds and feed ingredients. The test is designed for the analysis of animal feeds destined for feeding to ruminants to ensure that they do not contain ruminant by-products in violation of the ruminant-to-ruminant feed ban established by the U.S. Food and Drug Administration in 1997. This feed ban was established as a firewall against exposure of ruminant livestock animals to the prion agents responsible for neurological diseases such as bovine spongiform encephalopathy and scrapie. The test is designed for field use, e.g., at a feed mill, and yields a qualitative (presence/absence) result in 15-20 min. The objective of the study was to validate the lateral-flow test for detection of ruminant by-product material in a variety of finished animal feeds and feed ingredients. Results indicate that the test is specific for ruminant material and can detect as little as 1% ruminant material in these commodities.     

Development of a colloidal gold-based lateral-flow immunoassay for the rapid simultaneous detection of zearalenone and deoxynivalenol

A multianalyte lateral-flow technique using colloidal gold-labeled monoclonal antibodies was developed for the rapid simultaneous detection of deoxynivalenol (DON) and zearalenone (ZEA). The results of this qualitative one-step test were interpreted visually. A very simple and fast sample preparation was used, and the assay procedure could be accomplished within 10 min. When applied to spiked wheat samples, the technique gave accurate and reproducible results. Cut-off levels of 1500 and 100 μg kg⁻¹ for DON and ZEA, respectively, were observed. The described multianalyte format can be used as a reliable, rapid and cost-effective on-site screening technique for the simultaneous determination of mycotoxins in grain samples.     

Enhancing the lateral-flow immunoassay for detection of proteins using an aqueous two-phase micellar system

The lateral-flow (immuno)assay (LFA) has been widely investigated for the detection of molecular, macromolecular, and particle targets at the point-of-need due to its ease of use, rapid processing, and minimal power and laboratory equipment requirements. However, for some analytes, such as certain proteins, the detection limit of LFA is inferior to lab-based assays, such as the enzyme-linked immunosorbent assay, and needs to be improved. One solution for improving the detection limit of LFA is to concentrate the target protein in a solution prior to the detection step. In this study, a novel approach was used in the context of an aqueous two-phase micellar system comprised of the nonionic surfactant Triton X-114 to concentrate a model protein, namely transferrin, prior to LFA. Proteins have been shown to partition, or distribute, fairly evenly between the two phases of an aqueous two-phase system, which in turn results in their limited concentration in one of the two phases. Therefore, larger colloidal gold particles decorated with antibodies for transferrin were used in the concentration step to bind to transferrin and aid its partitioning into the top, micelle-poor phase. By manipulating the volume ratio of the two coexisting micellar phases and combining the concentration step with LFA, the transferrin detection limit of LFA was improved by tenfold from 0.5 to 0.05?μg/mL in a predictive manner. In addition to enhancing the sensitivity of LFA, this universal concentration method could also be used to improve other detection assays.     

Development of a colloidal gold-based lateral-flow immunoassay for the rapid simultaneous detection of clenbuterol and ractopamine in swine urine

A multianalyte lateral-flow immunochromatographic technique using colloidal gold-labeled polyclonal antibodies was developed for the rapid simultaneous detection of clenbuterol and ractopamine. The assay procedure could be accomplished within 5 min, and the results of this qualitative one-step assay were evaluated visually according to whether test lines appeared or not. When applied to the swine urines, the detection limit and the half maximal inhibitory concentration (IC₅₀) of the test strip under an optical density scanner were calculated to be 0.1 ± 0.01 ng mL⁻¹ and 0.1 ± 0.01 ng mL⁻¹, 0.56 ± 0.08 ng mL⁻¹, and 0.71 ± 0.06 ng mL⁻¹, respectively, the cut-off levels with the naked eye of 1 ng mL⁻¹ and 1 ng mL⁻¹ for clenbuterol and ractopamine were observed. Parallel analysis of swine urine samples with clenbuterol and ractopamine showed comparable results obtained from the multianalyte lateral-flow test strip and GC-MS. Therefore, the described multianalyte lateral-flow test strip can be used as a reliable, rapid, and cost-effective on-site screening technique for the simultaneous determination of clenbuterol and ractopamine residues in swine urine.      

Sensitive detection of a plant virus by electrochemical enzyme-linked immunoassay

The electrochemical enzyme-linked immunoassay increases the sensitivity of the detection of cucumber mosaic virus (CMV) by 5-fold compared with the spectrophotometric o-phenylenediamine (OPD) enzyme-linked immunosorbent assay (ELISA). The detection limit for the purified CMV is 1.0 ng/mL and the highest dilution ratio of the infected leaf sap is 1:5.0 x 10(4). The method is based on coupling the oxidation reaction of o-aminophenol (OAP)-H2O2 catalyzed by HRP-IgG conjugate with the electro-reduction of the enzymatic product. The enzymatic product 2-aminophenoxazine-3-one exhibits a sensitive second order derivative linear-sweep voltammetric response at the potential of -0.65 V (vs. Ag/AgCl) in pH 8.0 Britton-Robinson (B-R) buffer solution. So it can be applied to the detection of the plant virus with highly improved sensitivity.     

Sensitive detection of a plant virus by electrochemical enzyme-linked immunoassay

The electrochemical enzyme-linked immunoassay increases the sensitivity of the detection of cucumber mosaic virus (CMV) by 5-fold compared with the spectrophotometric o-phenylenediamine (OPD) enzyme-linked immunosorbent assay (ELISA). The detection limit for the purified CMV is 1.0 ng/mL and the highest dilution ratio of the infected leaf sap is 1?:?5.0 × 10⁴. The method is based on coupling the oxidation reaction of o-aminophenol (OAP)-H₂O₂ catalyzed by HRP-IgG conjugate with the electro-reduction of the enzymatic product. The enzymatic product 2-aminophenoxazine-3-one exhibits a sensitive second order derivative linear-sweep voltammetric response at the potential of –0.65 V (vs. Ag/AgCl) in pH 8.0 Britton-Robinson (B-R) buffer solution. So it can be applied to the detection of the plant virus with highly improved sensitivity.     

Factors affecting the detection limit of a flow- injection spectrophotometric procedure

Design criteria for manifolds to obtain adequated sensitivity and freedom from certain types of noise are discussed. For the determination of chloride by the mercury(II) thiocynate method, the mergin-streams manifold, needed to eliminated negative peaks at low concentrations and refractive index effects, increased the baseline noise because of inefficient mixing at the confluence point. Packed-bed reactors and single-bead-string reactors (SBSR) significantly improved the baseline noise. Refractive index effects caused by sample concentration gradients were eliminated by the injection of large volumes (>500 μl), so that the detector could view a homogeneous central part of the sample zone. This approach maximises the signal because the dispersion is governed only by the relative flow rates of the carrier and reagent streams. The detection limits for chloride were improved to 40 ng l^?1 in aqueous solutions of low ionic strength and to 1.3 mg l^?1 in 5.25% (w/v) potassium sulphate.     

Highly sensitive detection of human cardiac myoglobin using a reverse sandwich immunoassay with a gold nanoparticle-enhanced surface plasmon resonance biosensor

A highly sensitive reverse sandwich immunoassay for the detection of human cardiac myoglobin (cMb) in serum was designed utilizing a gold nanoparticle (AuNP)-enhanced surface plasmon resonance (SPR) biosensor. First, a monoclonal anti-cMb antibody (Mab1) was covalently immobilized on the sensor surface. AuNPs were covalently conjugated to the second monoclonal anti-cMb antibody (Mab2) to form an immuno-gold reagent (Mab2-AuNP). The reverse sandwich immunoassay consists of two steps: (1) mixing the serum sample with Mab2-AuNP and incubation for the formation of cMb/Mab2-AuNP complexes and (2) sample injection over the sensor surface and evaluation of the Mab1/cMb/Mab2-AuNP complex formation, with the subsequent calculation of the cMb concentration in the serum. The biosensor signal was amplified approximately 30-fold compared with the direct reaction of cMb with Mab1 on the sensor surface. The limit of detection of cMb in a human blood serum sample was found to be as low as 10 pM (approx. 0.18 ng mL⁻¹), and the inter-assay coefficient of variation was less than 3%. Thus, the developed SPR-based reverse sandwich immunoassay has a sensitivity that is sufficient to measure cMb across a wide range of normal and pathological concentrations, allowing an adequate estimation of the disease severity and the monitoring of treatment.     

Fabrication of SERS active gold nanorods using benzalkonium chloride,and their application to an immunoassay for potato virus X

The authors report on a robust method for the synthesis of gold nanorods (AuNRs) with tunable dimensions and longitudinal surface plasmon resonance. The method relies on seed-mediated particle growth in the presence of benzalkonium chloride (BAC) in place of the widely used surfactant cetyltrimethyl ammonium bromide (CTAB). Uniform AuNRs were obtained by particle growth in solution, and BAC is found to stabilize the AuNRs for >1 year. The SERS activity of the resulting AuNRs is essentially identical to that of CTAB-protected nanorods. The SERS activity of the BAC protected nanorods was applied to the quantitative analysis of potato virus X (PVX). The calibration plot for PVX is linear in the 10 to 750 ng?mL^?1 concentration range, and the detection limit is 2.2 ng?mL^?1.

Open image in new window

Graphical abstract SERS-active gold nanorods (AuNRs) have been prepared by using benzalkonium chloride as stabilization agent. Effects of chemical parameters on AuNRs have been explored and AuNRs were used in quantitative analysis of potato virus X (PVX).

     

A galactose polyacrylate-based hydrogel scaffold for the detection of cholera toxin and staphylococcal enterotoxin B in a sandwich immunoassay format

A galactoside-based polyacrylate hydrogel was used as a scaffold to immobilize antibodies for the development of a sandwich immunoassay to detect cholera toxin (CT) and staphylococcal enterotoxin B (SEB). The hydrogel possesses large pores and simulates a solution-like environment allowing easy penetration of large biomolecules. Highly crosslinked hydrogels containing pendant amine or carboxyl functionalities were polymerized through a free-radical polymerization process. Covalent crosslinking of the antibodies on hydrogel films was accomplished using a homobifunctional crosslinker or carbodiimide chemistry. Utilizing the two different crosslinking methodologies, our results demonstrated the effectiveness of repetitive additions of crosslinker reactant into a single location on the gel surface. This approach in fact increased the amount of immobilized antibody. Patterned arrays of the immobilized antibodies for sandwich immunoassay development were achieved using a PDMS template containing micro-channels. This template provided a suitable means for applying reagents in multiple cycles. Fluorescence and three-dimensional (3D) imaging by confocal microscopy and laser scanning confocal microscopy of Cy3-labeled anti-CT and/or Cy3-anti-SEB tracer molecules provided qualitative and quantitative measurements on the efficiency of protein immobilization, detection sensitivity and signal-to-noise ratios. As a result of using the galactose polyacrylate-base hydrogel as a platform for immunoassay development, we have successfully been able to achieve low limits of detection for SEB and cholera toxins (1.0 ng mL(-1)). Repetitive additions (>3 cycles) of the crosslinker and antibody have also shown a dramatic increase in the immobilization of antibody resulting in improved immunoassay sensitivity. Fluorescence signal-to-noise ratios using the hydrogel-based immunoassays have been observed as high a 40:1.     

A study on lowering the detection limit with solid-state lead-selective electrodes

The detection limit of a Pb²⁺ ion-selective electrode with a solid state (PbS/Ag₂S) membrane was successfully lowered to the nanomolar range. The electrode was applied in direct potentiometric determination of Pb²⁺ in aqueous solutions. Hydrodynamics, redox reaction at the solid-state surface as well as time dependency were investigated and found as key factors affecting the low detection limit. By optimizing these parameters improving detection limit by ca. three orders of magnitude was achieved.     

Carbon nanotag based visual detection of influenza A virus by a lateral flow immunoassay

Microchimica Acta - The authors report on a rapid and direct visual test for the detection of influenza A virus using a carbon nanotag based lateral flow assay. Carbon nanoparticles in the form of...     

Ultrasensitive and accelerated detection of ciguatoxin by capillary electrophoresis via on-line sandwich immunoassay with rotating magnetic field and nanoparticles signal enhancement

A sensitive and rapid on-line immunoassay for the determination of ciguatoxin CTX3C was developed based on a capillary mixing system, which was integrated with capillary electrophoresis (CE) separation and electrochemical (EC) detection. In the sandwich immunoassay system, anti-CTX3C-functionalized magnetic nanoparticles were used as immunosensing probes, and horseradish peroxidase (HRP) and anti-CTX3C antibody were bound onto the surface of gold nanoparticles (AuNPs) and used as recognition elements. Online formation of immunocomplex was realized in capillary inlet end with an external rotating magnetic field. Compared with classical HPLC-MS and ELISA, the assay adopting AuNPs as multienzyme carriers and online sandwich immunoassay format with rotating magnetic field exhibited higher sensitivity and shorter assay time. The linear range of the assay for CTX3C was from 0.6 to 150 ng/L with a correlation coefficient of 0.9948 (n = 2), and the detection limit (S/N = 3) was 0.09 ng/L. The developed assay showed satisfying reproducibility and stability, and it was successfully applied for the quantification of CTX3C in fish samples.     

Nonaqueous capillary electrophoresis with laser-induced fluorescence detection: a case study of comparison with aqueous media

A novel method based on separation by nonaqueous capillary electrophoresis (NACE) combined with laser-induced fluorescence (LIF) detection was developed and compared with classic aqueous modes of electrophoresis in terms of resolution of solutes of interest and sensitivity of the fluorescence detection. Catecholamines derivatized with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) were chosen as test analytes for their subtle fluorescence properties. In aqueous systems, capillary zone electrophoresis (CZE) was not suitable for the analysis of test analytes due to complete fluorescence quenching of NBD-labeled catecholamines in neat aqueous buffer. The addition of micelles or microemulsion droplets into aqueous running buffer can dramatically improve the fluorescence response, and the enhancement seems to be comparable for micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC). As another alternative, NACE separation was advantageous when performing the analysis under the optimum separation condition of 20 mM sodium tetraborate, 20 mM sodium dodecyl sulfate (SDS), 0.1% (v/v) glacial acetic acid, 20% (v/v) acetonitrile (ACN) in methanol medium after derivatization in ACN/dimethyl sulfoxide (DMSO) (3:2, v/v) mixed aprotic solvents containing 20 mM ammonium acetate. Compared with derivatization and separation in aqueous media, NACE-LIF procedure was proved to be superior, providing high sensitivity and short migration time. Under respective optimum conditions, the NACE procedure offered the best fluorescence response with 5-24 folds enhancement for catecholamines compared to aqueous procedures. In addition, the mechanisms of derivatization and separation in nonaqueous media were elucidated in detail.     

Factors influencing the size of PEO complexes with a tyrosine-rich polypeptide

Aqueous complexes of PEY1, a 36 100 Da random synthetic peptide of tyrosine (50 mol %) and glutamic acid (50 mol %), with poly(ethylene oxide) (PEO) were studied as functions of PEO molecular weight, mixing ratio of PEO and PEY1, and the presence of calcium ions. Without calcium ions, the complexes were water soluble, with each complex consisting of a single PEO chain with many bound PEY1 chains. In the presence of 1 mM calcium ions, PEY1 formed colloidal aggregates with intermediate molecular weight PEO (10(5) to 10(6) Da). By contrast, very high molecular weight PEO (8 x 10(6) Da) with calcium ions formed large hydrogels when mixed with PEY1. It is proposed that PEY1 molecules completely bind to low molecular PEO and thus are deactivated from causing the coupling of multiple PEO chains, whereas deactivation of PEY1 on very high molecular weight PEO clusters is a slower process, giving an opportunity for cluster-cluster aggregation.     

Potentiometric Cd-selective electrode with a detection limit in the low ppt range

A recently introduced model describing the response curves of polymer membrane ion-selective electrodes (ISEs) is used here to optimize a Cd²⁺-ISE with a view to achieve very low detection limits. In a first step, the selectivity behavior is determined for two membranes based on the ionophore, N,N,N′,N′-tetradodecyl-3,6-dioxaoctanedithioamide (ETH 5435), but having different concentrations of the ionophore and ion-exchanger. Based on these data, the optimal response curves are calculated with a model that takes into account the ion fluxes induced by interfering ions. The experimental results with different ionic backgrounds correspond very well with the predicted effects. The best lower detection limit of 10⁻¹⁰ M or 11 ppt Cd²⁺ is achieved at pH 7 with an ionic background of 10⁻⁴ M NaNO₃.     

The electronic spectra of the sandwich stacked PFBT: a theoretical study

Stacked models that include 9,9'-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-co-alt-4,7-(2,1,3-benzothiadiazole)dibromide (F(BT)F) monomer sandwiched between two stacked 2,1,3-benzothiadiazole (BT) units were explored using theoretical approaches. Molecular structures and the optical characteristics of the investigated species were investigated at the M06-2X/6-311G(d,p)//TD-M06-2X/6-311G(d,p) level of theory. In all models, the electronic excitation to the lowest singlet ππ* excited state (S1(ππ*)) is governed by the highest occupied molecular orbital to lowest unoccupied molecular orbital (HOMO → LUMO) transitions. The obtained results suggest that stacking interaction might have only minor effects on the transition energy for both absorption and emission processes. Instead, the reduction in the excitation energy of the stacked complexes should be attributed to the dipole-dipole interaction. The larger the interaction energy of the stacked models, the bigger the observed differences between absorption-emission energies. The presence of the solvation medium with small dielectric constant may increase the absorption-emission energy differences. It is expected that the largest absorption-emission shift can be observed in the benzene solution.