Preparation of well-aligned carbon nanotubes/silicon nanowires core-sheath composite structure arrays in porous anodic aluminum oxide templates

The well-aligned carbon nanotubes (CNTs) arrays with opened ends were prepared in ordered pores of anodic aluminum oxide (AAO) template by the chemical vapor deposition (CVD) method. After then, silicon nanowires (SiNWs) were deposited in the hollow cavities of CNTs. By using this method, CNTs/SiNWs core-sheath composite structure arrays were synthesized successfully. Growing structures and physical properties of the CNTs/SiNWs composite structure arrays were analyzed and researched by the scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction spectrum (XRD), respectively. The field emission (FE) behavior of the CNTs/SiNWs composite structure arrays was studied based on Fowler-Nordheim tunneling mechanism and current-voltage (/-V) curve. And the photoluminescence (PL) was also characterized. Significantly, the CNTs/SiNWs core-sheath composite structure nanowire fabricated by AAO template method is characteristic of a metal/semiconductor (M/S) behavior and can be     

Confined crystallization of polymers within anodic aluminum oxide templates

In this article, a review of recent literature on confined crystallization within nanoporous anodic aluminum oxide (AAO) templates is presented. For almost all infiltrated polymeric materials, crystal orientation within the nanopores is a function of pore diameter. T_c and T_m usually decrease and are a function of pore size. When no pore interconnection remains, the crystallization occur at large supercoolings in heterogeneity free environments. Hence, the nucleation mechanism changes from heterogeneous to surface or homogeneous nucleation. The crystallization kinetics of infiltrated polymers should be close to first order, since in confined environments nucleation is the determining step of the overall crystallization and Avrami indexes (n) of ～1 (or lower in some cases) should be obtained. Examples are provided where these conditions have been met and first order kinetics (n = 1) were measured as opposed to higher orders (n = 3?4) for the same polymer in the bulk. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1179–1194     

Electrochemical capacitance of nickel oxide nanotubes synthesized in anodic aluminum oxide templates

Nickel oxide (NiO) nanotubes for supercapacitors were synthesized by chemically depositing nickel hydroxide in anodic aluminum oxide templates and thermally annealing at 360 °C. The synthesized nanotubes have been characterized by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The capacitive behavior of the NiO nanotubes was investigated by cyclic voltammetry, galvanostatic charge–discharge experiment, and electrochemical impedance spectroscopy in 6 M KOH. The electrochemical data demonstrate that the NiO nanotubes display good capacitive behavior with a specific capacitance of 266 F g⁻¹ at a current density of 0.1 A g⁻¹ and excellent specific capacitance retention of ca. 93% after 1,000 continuous charge–discharge cycles, indicating that the NiO nanotubes can become promising electroactive materials for supercapacitor.     

Nano-polypyrrole supercapacitor arrays prepared by layer-by-layer assembling method in anodic aluminum oxide templates

A novel method for preparing nano-supercapacitor arrays, in which each nano-supercapacitor consisted of electropolymerized Polypyrrole (PPy) electrode / porous TiO₂ separator / chemical polymerized PPy electrode, was developed in this paper. The nano-supercapacitors were fabricated in the nano array pores of anodic aluminum oxide template using the bottom-up, layer-by-layer synthetic method. The nano-supercapacitor diameter was 80 nm, and length 500 nm. Based on the charge/discharge behavior of nano-supercapacitor arrays, it was found that the PPy/TiO₂/PPy array supercapacitor devices performed typical electrochemical supercapacitor behavior. The method introduced here may find application in manufacturing nano-sized electrochemical power storage devices in the future for their use in the area of microelectronic devices and microelectromechanical systems.     

Dissolution behavior of anodic oxide films formed in sulfanic acid on aluminum

Chemical dissolution of the barrier layer of porous oxide films formed on an aluminum foil (99.5% purity) in 1.5 M sulfanic acid after immersion in a 2 mol dm⁻³ sulphuric acid at 50 °C was studied. The barrier layer thickness before and after dissolution was determined using a re-anodizing technique. Re-anodizing was conducted in 0.5 mol dm⁻³ H³BO³/0.05 mol dm⁻³ Na²B⁴O⁷ solution. We found that the change in the porous oxide growth mechanism was observed at the anodizing voltage of 30 V. Taking into account this result chemical dissolution behaviour of the barrier layer of porous films formed at 20 V and 36 V and also the influence of annealing of oxide films at 200 °C were studied. We showed the interplay between the dissolution rates and charge distribution across the barrier layer. We conclude that the outer and middle layers have negative space charges and the inner layer has positive space charges.     

Syntheses of rare-earth metal oxide nanotubes by the sol-gel method assisted with porous anodic aluminum oxide templates

In this paper, we report a versatile synthetic method of ordered rare-earth metal (RE) oxide nanotubes. RE (RE=Y, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb) oxide nanotubes were successfully prepared from corresponding RE nitrate solution via the sol-gel method assisted with porous anodic aluminum oxide (AAO) templates. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM, and X-ray diffraction (XRD) have been employed to characterize the morphology and composition of the as-prepared nanotubes. It is found that as-prepared RE oxides evolve into bamboo-like nanotubes and entirely hollow nanotubes. A new possible formation mechanism of RE oxide nanotubes in the AAO channels is proposed. These high-quantity RE oxide nanotubes are expected to have promising applications in many areas such as luminescent materials, catalysts, magnets, etc.     

Nature of paramagnetic centers in anodic aluminum oxide formed in a solution of tartaric acid

Films of anodic aluminum oxide, prepared in an aqueous solution of 0.4 M tartaric acid, are studied by means of electron paramagnetic resonance (EPR) before and after heating at 200–700°C. The presence of a carbon radical is established in the films (g factor, 2.0027 ± 0.0002). The nature and conditions of its formation during the electrochemical oxidation of aluminum and the heat-treating of anodic aluminum oxide films are discussed.     

Preparation of vertically-aligned nickel nanowires with anodic aluminum oxide templates and their application as field emitters

In this study, well-ordered and vertically-aligned nickel nanowires (NiNWs) with a controllable length were grown inside the nanopores of anodic alumina oxide templates (AAOTs) using a simple electrochemical deposition (ECD) method. The electron field emission characteristics of the prepared NiNWs within AAOTs with two pore diameters (100 and 200 nm) and length in the range of 2.7–22 μm were measured and discussed. The turn-on field/the enhancement factor of 8.5 and 7-μm-long NiNWs prepared within 100 and 200 pore diameter AAOTs, respectively, were about 3.46 V/μm/17,621 and 4.8 V/μm/5001, respectively, according to I–V measurements.     

New nanotube synthesis strategy--application of sodium nanotubes formed inside anodic aluminium oxide as a reactive template

Formation of Na nanotubes inside the channels of anodic aluminium oxide (AAO) membranes has been achieved by decomposing NaH thermally on AAO. The as-produced material, Na@AAO, is applied as a reactive template to prepare other tubular materials. Reacting Na@AAO with gaseous C6Cl6 generates carbon nanotubes (ca. 250 nm, wall thickness of 20 nm, tube length of 60 microm) inside the AAO channels. Highly aligned bundles of nearly amorphous carbon nanotubes are isolated after AAO is removed.     

Effect of nature of templates on formation mechanism of aluminum oxide mesoporous structure

Mesoporous aluminum oxide is produced by the sol-gel method from aluminum isopropoxide using molecular structures of a cationic polyelectrolyte (polyethylenimine) and dodecylamine micelles as nanotemplates. The mechanism for the formation of mesophases of hybrid materials in colloidal systems upon template synthesis is discussed.     

Electrochemical analysis of the structure and formation kinetics of a porous anodic aluminum oxide

A technique is proposed for an electrochemical study of the morphology of porous anodic aluminum oxide films. The technique involves an analysis of anodic polarization curves recorded while linearly increasing potential. A phenomenological model describing the experimental curves is developed. The method may be used for studying the film formation kinetics     

Additive influence on Cu nanotube electrodeposition in anodised aluminium oxide templates

Anodised aluminium oxide (AAO) templates have been utilised to investigate Cu deposition from a typical sulphate plating bath. The influence of the common additives poly ethylene glycol (PEG), chloride ion (Cl^?) and Bis-(sodium sulphopropyl)-disulphide (SPS) on the deposition process has been analysed. The growth of Cu wires or nanotubes (with tube walls of 40–70 nm) is significantly influenced by the action of the additives. In the presence of either Cl^? or SPS solid wire growth is observed, however, when PEG is added with Cl^? the growth of ordered Cu nanotubes is observed. SPS added to a bath containing Cl^? and PEG restores the growth of wires.     

Electrodeposition of acicular metals in pores of anodic aluminum oxide

Electrodeposition of the Co-Cu system in pores of anodic aluminum oxide was studied.     

Effect of atomic layer deposition coatings on the surface structure of anodic aluminum oxide membranes

Anodic aluminum oxide (AAO) membranes were characterized by UV Raman and FT-IR spectroscopies before and after coating the entire surface (including the interior pore walls) of the AAO membranes by atomic layer deposition (ALD). UV Raman reveals the presence of aluminum oxalate in bulk AAO, both before and after ALD coating with Al2O3, because of acid anion incorporation during the anodization process used to produce AAO membranes. The aluminum oxalate in AAO exhibits remarkable thermal stability, not totally decomposing in air until exposed to a temperature >900 degrees C. ALD was used to cover the surface of AAO with either Al2O3 or TiO2. Uncoated AAO have FT-IR spectra with two separate types of OH stretches that can be assigned to isolated OH groups and hydrogen-bonded surface OH groups, respectively. In contrast, AAO surfaces coated by ALD with Al2O3 display a single, broad band of hydrogen-bonded OH groups. AAO substrates coated with TiO2 show a more complicated behavior. UV Raman results show that very thin TiO2 coatings (1 nm) are not stable upon annealing to 500 degrees C. In contrast, thicker coatings can totally cover the contaminated alumina surface and are stable at temperatures in excess of 500 degrees C.     

Synthesis of silver nanotubes by electroless deposition in porous anodic aluminium oxide templates

An electroless deposition method has been employed for the synthesis of silver nanotubes using porous anodic aluminium oxide as templates, by which high-yield silver nanotubes with length over ten microns have been synthesized.     

Ellipsometric study of anodic oxide films formed on niobium surfaces

Anodic oxide films formed potentiostatically on niobium surfaces, from open circuit potential (OCP) to 10 V, were studied by performing in situ and ex situ ellipsometric measurements. The kinetics of the film thickness growth in 1 M H₂SO₄ and complex indices of refraction of these films were determined. A strong influence of the surface preparation conditions on the complex refractive indices of the metal substrate and anodic oxide films was shown. By steady-state measurements at OCP, a small thickening of the natural air-formed oxide film with chemical composition Nb₂O₅ in 1 M H₂SO₄ solution was detected. With cathodic pre-treatment, only partial reduction and small thinning of the natural air-formed oxide film was possible. The thicknesses of the natural air-formed oxide films on fine mechanically polished and electropolished Nb surfaces were determined. The build up of the natural air-formed oxide film, at ex situ conditions, on the already formed anodic oxide films was confirmed. It was shown that electropolishing gives more similar optical surface properties to the bare metal than the fine mechanical polishing. Electronic Publication     

A novel approach to large-scale formation of through-hole porous anodic aluminum template

A novel anodic oxidization equipment was designed to fabricate a large number of porous anodic alumina （PAA） templates in one time. This approach improved the efficiency of the preparation of the PAA templates remarkably in a normal lab and is expected to be used for the large-scale production in the future.     

Layer-by-Layer electrostatic self-assembly of polyelectrolyte nanoshells on individual carbon nanotube templates

Carbon nanotubes have been featured prominently in the nanotechnology research for some time, yet robust strategies for noncovalent chemical modification of the nanotube surface are still missing. Such strategies are essential for the creation of functional device architectures. Here, we present a new general procedure for carbon nanotube modification based on polyelectrolyte layer-by-layer assembly. We have built multilayer structures around individual carbon nanotube bridges by first modifying the nanotube surface with a pyrene derivative followed by layer-by-layer deposition of polyelectrolyte macroions on the nanotube. Transmission electron microscopy and scanning confocal fluorescence microscopy images confirm the formation of nanometer-thick amorphous polymer nanoshells around the nanotubes. These multilayer polyelectrolyte shells on individual carbon nanotubes introduce nearly unlimited opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent structures.