KMnF3的熔盐法合成及掺铕体系的发光性质

采用简单的熔盐法合成了KMnF₃单相样品及稀土离子铕掺杂的KMnF₃（KMnF₃：Eu）荧光样品. X射线粉末衍射（XRD）表征结果显示,KMnF₃属立方晶系,为AMF₃型钙钛矿结构氟化物. 对样品KMnF₃：Eu的发光性质进行了研究,荧光光谱分析结果表明,Mn²⁺,Eu²⁺与Eu³⁺这3个发光中心共存于KMnF₃：Eu体系中. 讨论了改变掺入Eu离子的摩尔分数对Mn²⁺,Eu²⁺以及Eu³⁺发光强度的影响.     

电解液对水系可充电池MnO2正极电化学性能的影响

研究了水系电解液中Li⁺、Zn²⁺和Mn²⁺阳离子对具有不同晶型结构和形貌的MnO₂正极电化学性能的影响,探讨其储能机理。结果表明,在不含Mn(II)离子的水溶液中,MnO₂电极所表现的电化学性能趋同,容量低,衰减快。含有Zn²⁺离子的水溶液中,MnO₂电极因二价锌离子的嵌入-脱出,容量明显提升,但衰减严重。当溶液中同时含有Zn²⁺、Mn²⁺离子时,基于Mn²⁺和Zn²⁺离子之间的协同作用和Mn²⁺离子氧化/还原反应过程的作用,有效抑制MnO₂颗粒的聚集和结构塌陷,削弱碱式硫酸锌杂质不利的影响,保持了锌离子在MnO₂电极中嵌入-脱出的高容量特性(200 mAh·g^-1,电流密度：100 mA·g^-1),及良好的循环稳定性。     

Ce1-xMnxO2表面性质对催化CO2和甲醇直接合成DMC反应活性的影响

通过共沉淀法制备了一系列Mn掺杂量不同的Ce_1-xMn_xO₂催化剂, 并将其用于催化CO₂和甲醇直接合成碳酸二甲酯(DMC). 通过X射线衍射(XRD)、 氮气吸附-脱附、 透射电子显微镜(TEM)、 X射线光电子能谱(XPS)和程序升温脱附(TPD)等手段研究了Ce_1-xMn_xO₂表面性质对催化CO₂和甲醇直接合成DMC反应活性的影响. 结果表明, Mn离子进入CeO₂晶格中形成固溶体, 随着Mn掺杂量增加, 催化剂表面弱酸碱位数量逐渐降低, 中强酸碱和强酸碱位数量增加, 催化剂表面氧空位含量呈先增加后减少的变化趋势, 当Mn掺杂量较少时, 催化剂表面Mn²⁺比例较高, 有利于Ce⁴⁺+Mn²⁺→Ce³⁺+Mn³⁺反应的进行, 促进催化剂表面氧空位生成; 进一步提高Mn掺杂量时, 催化剂表面Mn⁴⁺比例提高, 有利于Ce³⁺+Mn⁴⁺→Ce⁴⁺+Mn³⁺反应的进行, 导致催化剂表面氧空位含量减少. 研究发现Ce_1-xMn_xO₂催化剂活性与表面氧空位含量线性相关.     

球形表面富锰MnxCo3−xO4−ƞ尖晶石型催化剂选择性催化还原NOx研究

采用共沉淀法制备了高比表面积的Mn_xCo_3−xO₄球形催化剂,研究了NH₃选择性催化还原NO_x性能。Mn-Co金属氧化物具有尖晶石结构,随着Co含量的增加,晶体结构由四方相转变为立方相。高浓度的表面活性氧物种和变价元素的强有效电子转移(Co³⁺ + Mn³⁺ ↔ Co²⁺ + Mn⁴⁺)有利于提高Mn_xCo_3−xO₄ (x = 1.0、1.5、2.0)尖晶型石催化剂的氧化还原能力,催化剂表面的Mn富集作用形成了氧缺陷结构和丰富的表面活性位点,进一步促进SCR脱硝反应,呈现出优异的催化性能。Co_tet(CoMn)_octO₄晶体结构中,Mn离子(Mn³⁺和Mn⁴⁺,以三价锰为主)和部分Co离子被配置到八面体中心,这些物种作为活性位点存在着较强的电子转移交互作用,该构型对促进低温脱硝活性和保护活性位点耐受SO₂毒害具有重要的意义。Mn-Co尖晶石表面的NH₃-SCR脱硝反应过程主要遵循Eley-Rideal反应机理,即吸附态NH₃与气态NO (或NO₂)的反应路径。随着反应温度的增加,反应生成的NH₄NO₃中间体很可能转化为NH₄NO₂物种,进而分解为N₂,提高了催化剂的氮气选择性。     

Cs2ZnCl4∶Ce3+,Mn2+的合成及其多模发光性能

近年来,低维无铅金属卤化物由于其独特的光学性质、低毒性和优异的环境稳定性等优点受到了广泛关注。采用水热法成功制备Cs₂ZnCl₄∶Ce³⁺、Cs₂ZnCl₄∶Mn²⁺以及Cs₂ZnCl₄∶Ce³⁺,Mn²⁺等微米晶,并利用X射线衍射仪、荧光光谱仪等表征手段对其物相和发光特性进行了系统性研究。研究结果表明,Cs₂ZnCl₄微米晶为正交相零维结构,其发射光谱依赖于掺杂离子的激发波长,例如,Ce³⁺离子掺杂的Cs₂ZnCl₄微米晶在254nm的激发条件下,其发射光谱峰位位于350nm,对应于Ce³⁺离子4f-5d的跃迁;Mn²⁺离子掺杂的Cs₂ZnCl₄微米晶在361nm的激发条件...     

MnOx-CeO2催化剂的氯苯氧化性能及反应机理

研究了Mn/Ce摩尔比、反应温度、氧气和水对MnO_x-CeO₂催化剂催化氯苯氧化性能(活性、选择性和稳定性)的影响,并分析了其理化性能、作用过程和反应机理.结果表明,在含H₂O_gas和O₂(体积分数均为5%)条件下,Mn₂Ce₁O_x在100,200和300℃下分别取得了80.6%,86.8%和97.5%的氯苯转化率;反应温度和氧气含量的增加及水的存在均有利于提高催化活性和反应稳定性;MnO_x和CeO₂复合提高了比表面积(128.61 m²/g)、降低了孔径(6.17 nm)且增强了表面酸性(中酸和强酸位点)和氧化还原能力,价态电子交互循环过程(Ce⁴⁺/Ce³⁺←→—Mn⁴⁺/Mn³⁺/Mn²⁺)和氧循环作用(吸附氧←→—晶格氧)是催化反应...     

第四周期过渡金属钼磷三元杂多化合物的氧化还原性质研究

研究了Keggin结构钼磷杂多化合物Na₅[PM(H₂O)Mo₁₁O₃₉]·nH₂O(M=Mn²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺在溶液中的氧化还原性质,发现环境的改变可对杂多阴离子的极谱半波电位产生影响,其影响程度的大小决定于过渡金属离子本身的性质。取代后的钼磷杂多阴离子的半波电位顺序为Ni²⁺>Co²⁺>Zn²⁺>Cu²⁺>Mn²⁺,pH值的变化影响氧化还原性质,并阐述了变价金属Cu²⁺对杂多阴离子氧化还原性质的影响.     

Al3+离子掺杂δ-MnO2的制备和电化学性能

采用水热法合成了不同比例Al³⁺离子掺杂的δ-MnO₂纳米粉体.通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、 X射线光电子能谱(XPS)、循环伏安(CV)曲线、电化学阻抗谱(EIS)和恒电流充放电(GCD)曲线等手段对材料的结构和电化学性能进行了表征.结果表明, Al³⁺离子进入δ-MnO₂的晶格替代部分Mn³⁺和Mn⁴⁺离子,使得δ-MnO₂电极的性能明显提升.当反应物中Al³⁺/Mn²⁺摩尔比为0.45时,所得样品(A0.45M)的性能最好;其在1 A/g电流密度下的比电容为207.61 F/g,是纯相δ-MnO₂(A0M)的2.4倍;其在10 A/g电流密度下循环10000次后的比电容为100.81 F/g,容量保持率为81.33%.     

P2-type Na0.6[Mg(II)0.3Mn(IV)0.7]O2 as a new model material for anionic redox reaction

In this work, P2-Na_0.6[Mg(II)_0.3Mn(IV)_0.7] O₂ with inoxidizable elements (Na⁺, Mg²⁺ and Mn⁴⁺) except O^2- was synthesized and investigated, which exhibited high reversible capacity (~210 mAh/g) with highly reversible ARR characteristic.     

Mn2+在铝酸盐中的发光

用金属硝酸盐、稀土氧化物和乙酸锰为原料,用燃烧法合成了Ce³⁺、Tb³⁺、Mn²⁺共激活的铝酸盐绿色荧光粉,在Ce³⁺和Tb³⁺共激活的铝酸盐体系中掺入Mn²⁺后,发射峰中出现锰的特征峰.通过对其结构的分析,对Mn²⁺发光和最佳掺杂量给出了合理的解释.同时研究了不同碱金属和碱土金属离子代替Mg²⁺时,对Mn²⁺发光的影响.     

Determination of the rates of formation and hydrolysis of the Schiff bases formed by pyridoxal 5′-phosphate and hydrazinic compounds

The macroscopic rate constants of formation (k₁) and hydrolysis (k₂) for the reactions of pyridoxal 5′-phosphate (PLP) with hydrazine (PLP-HY system), carbidopa (-hydrazino--methyl-β-(3,4-dihydroxyphenyl)propionic acid, PLP-CD system), hydralazine (1-hydrazinophthalazine, PLP-HL system) and isoniazid (4-pyridinecarboxylic acid hydrazide, PLP-ISO system) were fitted to a kinetic scheme that considers the different ionic species present in the medium, their protonation constants, and their individual rates of formation (k₁ⁱ) and hydrolysis (k₂ⁱ). The results obtained for the molecules bearing the hydrazine group are compared with those for the reactions of PLP with n-hexylamine (PLP-NHA system) and poly- -lysine (PLP-LYS system). Some structural effects on the individual rate constants are also examined.     

含吡唑啉酮酰肼类衍生物的合成与结构

报道了PMBP-NTH(NTH为烟酰肼)与PMBP-PAH(PAH为对甲氧基苯甲酰肼)的合成、表征和晶体结构分析,PMBP-NTH晶体属三斜晶系,具有P1空间群,a=0.9024(2)nm,b=1.0953(2)nm,c=1.1635(2)nm,α67.070(10)°,β=68.220(10)°,γ=84.770(10)°,V=0.9816(3)nm^3,Z=2,Dc=1.345g/cm^3,μ=0.090mm^-1,F(000)=416,R=0.0363,ωR=0.0870.PMBP-PAH属单斜晶系,具有P21/c空间群,a=1.2715(4)nm,b=0.91710(10)nm,c=1.8979(3)nm,β=106.890(10)°,V=2.1177(8)nm^3,Z=4,Dc=1.338g/cm^3,μ=0.090mm^-1,F(000)=896,R=0.0414,ωR=0.0972.这两个化合物在分子内都形成了大的共轭体系,由于分子间氢键力的作用,又使它们在晶体中以二聚体形式存在.     

Radical-mediated reduction of the dithiocarbamate group under tin-free conditions

Reductive desulfurisation of dithiocarbamates is conveniently achieved using H(3)PO(2)-Et(3)N-ACCN in refluxing dioxane. Fused and spirocyclic β-lactams, prepared through 4-exo trig carbamoyl radical cyclisation-dithiocarbamate group transfer reactions, are reduced without fragmentation of the strained 4-membered ring. Diethyl tetraacetyl-d-glucopyranosyl dithiocarbamate is selectively reduced with or without acyloxy group migration depending on reaction conditions and choice of reductant. Deuterium incorporation from D(3)PO(2)-Et(3)N is observed for a system involving a nucleophilic radical intermediate, but not in the case of the electrophilic radical obtained through acyloxy group migration on a glucose derivative.     

Spectroscopic and DFT studies to understand the liquid formation mechanism in the LiTFSI/acetamide complex system

It is interesting that although both lithium bis(trifluoromethane sulfone) imide (LiN(SO2CF3)2, LiTFSI) and acetamide (CH3CONH2) are solid, their mixture is a liquid in an appropriate molar ratio range at room temperature. The liquid formation mechanism of the LiTFSI/acetamide complex has been investigated by FT-IR and FT-Raman spectroscopy. The spectroscopic studies show that the Li+ ions coordinate with the C=O group of acetamide whereas the SO2 group in TFSI- anions interacts with the NH2 group of acetamide via hydrogen bonding. These interactions lead to the breakage of the hydrogen bonds between acetamide molecules and to the dissociation of LiTFSI, resulting in the formation of this molten salt. Furthermore, it has been found that moderate interaction between LiX and RCONH2 (R = -NH2, -CH3 and -CF3) is favorable for forming a LiX/RCONH2 molten salt system with low eutectic temperature and high conductivity based on density functional theory (DFT) calculational and experimental comparison for different R groups in RCONH2 and different lithium salts.     

Spectroscopy study on the noncovalent interactions in the binary and ternary systems of L-lysine, adenosine 5'-triphosphate and magnesium ions

Intermolecular interactions of adenosine 5'-triphosphate (ATP) with Lysine (Lys) and Mg(2+) were studied in aqueous solution by (1)H and (31)P NMR spectra. In the metal-free system, the N-1 atom of the purine ring of ATP and carboxyl group of Lys are the interaction sites at low pH conditions. With increasing pH, the interaction efficiency between the phosphate group of ATP and the protonated ammonium group of Lys increased significantly, while that with carboxyl group in Lys decreased. In the Mg(2+)-Lys-ATP system, multi-interactions, such as coordination, cations (Mg(2+), NH(3)(+))-π, hydrogen bonding, ion-pairing interactions and electrostatic interactions co-existed. In addition, the recognition of ATP by the amino acid cation (Lys) was significantly promoted by the addition of magnesium ion, which led to the coordination competition between Lys and ATP.     

Modulation of the ring size and nuclearity of metallamacrocycles via the steric effect of ligands: preparation and characterization of 18-membered hexanuclear, 24-membered octanuclear, and 30-membered decanuclear manganese metalladiazamacrocycles with alpha- and beta-branched N-acylsalicylhydrazides

Hexanuclear, octanuclear, and decanuclear manganese metalladiazamacrocycles have been prepared by reacting a series of pentadentate ligands, N-acylsalicylhydrazides (N-(3-methylbutanoyl)salicylhydrazide (H(3)3-mbshz), N-(phenylacetyl)salicylhydrazide (H(3)pashz), N-(3,3-dimethylbutanoyl)salicylhydrazide (H(3)3-dmbshz), N-(2-methylpropanoyl)salicylhydrazide (H(3)2-mpshz), N-((R,S)-2-methylbutanoyl)salicylhydrazide (H(3)RS-2-mbshz), N-((S)-2-methylbutanoyl)salicylhydrazide (H(3)S-2-mbshz), and N-(2,2-dimethylpropanoyl)salicylhydrazide (H(3)2-dmpshz)), with manganese(II) acetate tetrahydrate. The self-assembled, supramolecular complexes assume a nearly planar cyclic structure with an -(Mn-N-N)(n) backbone and measure approximately 2.1, approximately 2.3, and approximately 2.6 nm in outer diameters for n = 6, 8, and 10, respectively. The chiralities of the manganese centers on the metalladiazamacrocycle occur in alternating ...LambdaDeltaLambdaDelta... configurations. While beta-branched N-acylsalicylhydrazides (H(3)3-mbshz, H(3)pashz, H(3)3-dmbshz) with a sterically flexible Calpha methylene group yield 18-membered hexanuclear manganese metalladiazamacrocycles of S(6) point group symmetry, alpha-branched N-acylsalicylhydrazides lead to 24-membered octanuclear manganese metalladiazamacrocycles or 30-membered decanuclear manganese metalladiazamacrocycles depending on the size of the N-acyl substituents. The alpha-branched H(3)2-mpshz ligand with the sterically least demanding isopropyl tail at the N-acyl position yields a 24-membered octanuclear manganese metalladiazamacrocycle of S(8) point group symmetry, but other alpha-branched N-acylsalicylhydrazides such as H(3)RS-2-mbshz, H(3)S-2-mbshz, and H(3)2-dmpshz lead to 30-membered decanuclear manganese metalladiazamacrocycles of S(10) point group symmetry. The magnetic properties of the metalladiazamacrocycles are characterized by a weak antiferromagnetic exchange interaction, with J(eff) = -8.5 to -3.8 K between the Mn(3+) ion spins with S = 2 in the cyclic system.     

Catalytic cyclization of o-alkynylbenzaldehyde acetals and thioacetals. Unprecedented activation of the platinum catalyst by olefins. Scope and mechanism of the reaction

A general protocol for the synthesis of functionalized indenes from o-alkynylbenzaldehyde acetals and thioacetals has been elaborated. Acetals uniformly give cyclization products having the alkyl group from the starting acetylene migrated to the alpha-position, whereas the cyclization of the corresponding thioacetals proceeds without alkyl migration. Optimization of the catalytic system for the cyclization of o-alkynylbenzaldehyde acetals revealed an unknown activation effect: PtCl(2) was found to be a better catalyst for the cyclization of acetals in the presence of olefins than without. A similar catalytic system (PtCl(2)/benzoquinone) has been found to be appropriate for the cyclization of cyclic acetals, whereas the optimal catalyst for the reaction of thioacetals is PdI(2). NMR monitoring of two reactions, acetal 3a + Pd(CH(3)CN)Cl(2) in CD(3)CN and thioacetal 5j + PdI(2) in CD(2)Cl(2), revealed that in both reactions similar cationic species are formed at the early stage of the transformation. Computational data (B3LYP/SDD level of theory) suggest that the difference in the reaction pathways for acetals and thioacetals can be rationalized by taking into account the relative stabilities of the corresponding vinylpalladium intermediates (22 vs 20 and 19 vs 21), which suggests a reversible thermodynamically controlled alkyl migration in the intermediate vinylcationic species.     

Molecular, 1D,and 2D systems built from phenylcyanamido ligands. Syntheses,crystal structures,and characterization of their magnetic properties

Several MnII compounds with phenylcyanamido ligands have been synthesized and characterized by means of single-crystal X-ray structural determination. The reported compounds show a wide variety of nuclearity from mononuclear and dinuclear systems to 1D chains and 2D networks in which X-phenylcyanamide (X-pcyd) anions act as the bridging ligand. Mononuclear compound [Mn(H2O)2(4-bzpy)2(3-Cl- pcyd)2] (2) crystallizes in the monoclinic system, P21/a space group, dinuclear compounds (mu 1,3-3-Cl-pcyd)2[Mn(2,2'-bpy)(3-Cl-pcyd)(MeOH)]2 (2) and (mu 1,3-3-Cl-pcyd)2[Mn(2,2'-bpy)(3-Cl-pcyd)(EtOH)]2 (3) crystallize in the triclinic system, P1 space group, 1D chain [(mu 1,3-4-Cl-pcyd)2[Mn(2,2'-bpy)]]n (4) crystallizes in the monoclinic system, /2/a space group, and 2D network [Mn(mu-4,4'-bpy)(mu 1,3-3-F-pcyd)2]n (5) crystallizes in the monoclinic system, C2 space group. Susceptibility measurements on compounds 2-4 reveal moderate antiferromagnetic coupling in all cases. MO calculations have been made to elucidate the main factors that control the superexchange pathway for this kind of ligand. Comparison of their magnetic behavior with that of related ligands such as azido and dicyanamido is reported.     

Synthesis, structure, and catalytic properties of V(IV), Mn(III), Mo(VI), and U(VI) complexes containing bidentate (N, O) oxazine and oxazoline ligands

Synthesis of seven complexes containing oxazoline ([(L(1))(2)V=O] (4), [(L(1))(2)MoO(2)] (5), [(L(1))(2)UO(2)] (6); HL(1) (1) [HL(1) = 2-(4',4'-dimethyl-3'-4'-dihydroxazol-2'-yl)phenol]), chiral oxazoline ([(L(2))(2)UO(2)] (7); HL(2) (2) [HL(2) = (4'R)-2-(4'-ethyl-3'4'-dihyroxazol-2'-yl)phenol]), and oxazine ([(L(3))(2)V=O] (8), [(L(3))(2)Mn(CH(3)COO(-))] (9), [(L(3))(2)Co] (10); HL(3) (3) [HL(3) = 2-(5,6-dihydro-4H-1,3-oxazolinyl)phenol]) and their characterization by various techniques such as UV-vis, IR, and EPR spectroscopy, mass spectrometry, cyclic voltammetry, and elemental analysis are reported. The novel oxazine (3) and complexes 4, 5, 8 and 9 were also characterized by X-ray crystallography. Oxazine 3 crystallizes in the monoclinic system with the P2(1)/n space group, complexes 4 and 9 crystallize in the monoclinic system with the P2(1)/c space group, and complexes 5 and 8 crystallize in the orthorhombic system with the C222(1) space group and the P2(1)2(1)2(1) chiral space group, respectively. The representative synthetic procedure involves the reaction of metal acetate or acetylacetonate derivatives with corresponding ligand in ethanol. Addition of Mn(OAc)(2).4H(2)O to an ethanol solution of 3 gave the unexpected complex Mn(L(3))(2).(CH(3)COO(-)) (9) where the acetate group is coordinated with the metal center in a bidentate fashion. The catalytic activity of complexes 4-9 for oxidation of styrene with tert-butyl hydroperoxide was tested. In all cases, benzaldehyde formed exclusively as the oxidation product.     

Vibrational spectroscopy of the G...C base pair: experiment, harmonic and anharmonic calculations, and the nature of the anharmonic couplings

The results of harmonic and anharmonic frequency calculations on a guanine-cytosine complex with an enolic structure (a tautomeric form with cytosine in the enol form and with a hydrogen at the 7-position on guanine) are presented and compared to gas-phase IR-UV double resonance spectral data. Harmonic frequencies were obtained at the RI-MP2/cc-pVDZ, RI-MP2/TZVPP, and semiempirical PM3 levels of electronic structure theory. Anharmonic frequencies were obtained by the CC-VSCF method with improved PM3 potential surfaces; the improved PM3 potential surfaces are obtained from standard PM3 theory by coordinate scaling such that the improved PM3 harmonic frequencies are the same as those computed at the RI-MP2/cc-pVDZ level. Comparison of the data with experimental results indicates that the average absolute percentage deviation for the methods is 2.6% for harmonic RI-MP2/cc-pVDZ (3.0% with the inclusion of a 0.956 scaling factor that compensates for anharmonicity), 2.5% for harmonic RI-MP2/TZVPP (2.9% with a 0.956 anharmonicity factor included), and 2.3% for adapted PM3 CC-VSCF; the empirical scaling factor for the ab initio harmonic calculations improves the stretching frequencies but decreases the accuracy of the other mode frequencies. The agreement with experiment supports the adequacy of the improved PM3 potentials for describing the anharmonic force field of the G...C base pair in the spectroscopically probed region. These results may be useful for the prediction of the pathways of vibrational energy flow upon excitation of this system. The anharmonic calculations indicate that anharmonicity along single mode coordinates can be significant for simple stretching modes. For several other cases, coupling between different vibrational modes provides the main contribution to anharmonicity. Examples of strongly anharmonically coupled modes are the symmetric stretch and group torsion of the hydrogen-bonded NH2 group on guanine, the OH stretch and torsion of the enol group on cytosine, and the NH stretch and NH out-of-plane bend of the non-hydrogen-bonded NH group on guanine.